thanks
1. Turn off ambient mode
2. Set brightness to 1
3. Limit screen on time by disabling notifications on apps you don't really need to view from the watch, and always covering the display to turn off manually when you are done looking at it.
tcollum said:
1. Turn off ambient mode
2. Set brightness to 1
3. Limit screen on time by disabling notifications on apps you don't really need to view from the watch, and always covering the display to turn off manually when you are done looking at it.
Click to expand...
Click to collapse
thanks!
Also, if you leave it in its charger, and don't use it, it's battery will stay at 100%.
Use a watch face that doesn't have a second hand.
Sent from my HTC6525LVW using Tapatalk
1. Don't use a watch face that didn't come from motorola pre installed. Wait for google to open it up to developers. Right now the way the watch faces work is through apps and that uses more battery.
2. Ambient off
3. Turn off any crazy notifications you get on your phone that you dont care about like twitter
Alcoholic said:
1. Don't use a watch face that didn't come from motorola pre installed. Wait for google to open it up to developers. Right now the way the watch faces work is through apps and that uses more battery.
2. Ambient off
3. Turn off any crazy notifications you get on your phone that you dont care about like twitter
Click to expand...
Click to collapse
Actually getting a 3rd party watch face that doesn't have a second hand or animation helps battery life a lot.
Sent from my HTC6525LVW using Tapatalk
ChrisNee1988 said:
Actually getting a 3rd party watch face that doesn't have a second hand or animation helps battery life a lot.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I concur! Installed custom watch with no "seconds hand", ambient mode is ON, 8am to 10pm drains to 30-35%! Standard Minimal watch face with the same options = 10% at the end of day.
http://forum.xda-developers.com/moto-360/general/moto-360-2-day-battery-test-graphs-t2880565/page2
Post #13
Has anyone tried Wear Battery Saver app?
http://tinyurl.com/lkua8dk
Alcoholic said:
1. Don't use a watch face that didn't come from motorola pre installed. Wait for google to open it up to developers. Right now the way the watch faces work is through apps and that uses more battery.
2. Ambient off
3. Turn off any crazy notifications you get on your phone that you dont care about like twitter
Click to expand...
Click to collapse
Actually the notification I care more about it is Twitter.?
kandelai said:
Has anyone tried Wear Battery Saver app?
http://tinyurl.com/lkua8dk
Click to expand...
Click to collapse
haven't tried it...doesnt seem too convincing to me.
Try downloading mini wear launcher. If you swipe left to right twice you can dim the screen to super dim. I use it when i'm in the office so i dont have a super bright screen for no reason.
The only thing that's made a noticeable difference for me has been turning off ambient mode. For the last week I've been wearing the watch for about 17 hours / day. At the end of the day I usually have 25 - 40% left in the tank. Today I decided to try it with ambient mode on. I'm 10 hours in and I'm already at 38%. So it makes a big difference to me. That's still not bad since I'm averaging 6% / hour so I could potentially make it last my normal 17 hours. But it's a bit too close.
Also, I know I can drop it on the charger for 10 minutes and I'll pick up another 10 - 15% or 2 hours of ambient or 3 - 4 of non-ambient time.
memekmek said:
haven't tried it...doesnt seem too convincing to me.
Try downloading mini wear launcher. If you swipe left to right twice you can dim the screen to super dim. I use it when i'm in the office so i dont have a super bright screen for no reason.
Click to expand...
Click to collapse
I've tried that super dim mode. It seems to be pretty good indoors, but I can't see ANYTHING outside. I wish the auto-brightness was able to use it though so I don't have to manually switch it.
With ambient off, how accurate the watch screen will wake up when you bring your wrist up see the screen?
Stop using your watch like a phone
Can you tell us what watchface from 3rd party you use that doesn't have second end
Thx.
hardtheory said:
Can you tell us what watchface from 3rd party you use that doesn't have second end
Click to expand...
Click to collapse
If you are using facer, here are a few hundred to choose from: http://facerepo.com/app/
PsychDrummer said:
I've tried that super dim mode. It seems to be pretty good indoors, but I can't see ANYTHING outside. I wish the auto-brightness was able to use it though so I don't have to manually switch it.
Click to expand...
Click to collapse
Autobrightness does use the super dim mode for me. If I'm indoors and there's not a lot of lighting changing the brightness to 1 will usually make my screen brighter.
Even if you use a face with a second hand in facer, just delete the second hand layer and all is good
Related
Hello little birdies.
I am having an issue with my auto-brightness and I would like to know if anyone else has experienced this.
Whenever my auto-brightness shines through the power of the sun (goes to 100%) it seems to get stuck at full brightness and my already not so good screen-on time takes a dip and I always notice this too late . I use the quick settings widget which is preinstalled and the A for auto-brightness is set but when I click it the screen immediately lowers the brightness, while the A for auto-brightness remains, and a vain in my forehead pops.
Furthermore after checking badass battery monitor it shows that my screen is often at 100% sun shadowing brightness. Today it was at full mutated power the whole time. Anyone got an idea as to what could cause this? Anyone?
PS. You might have noticed in the text above that I think the screen is really bright when at full power and that I can see the screen perfectly during a warm ball-soothing sunny day.
Yes, I have a bug with auto brightness too. It seems to deactivate itself. I have activated it a couple of times and everytime it deactivate itself at 100 % after some use.
I have an international HTC One X with the latest 1.29.401.11 update.
Glad to know I'm not the only one. I will soon factory reset my phone to check if it magically gets better.
I noticed this last night. My phone was blindingly bright and I didn't understand why it was set to 100%. I set it back to Auto and so far its still on Auto. i will have to keep an eye on this.
HTC really need to fire the monkeys they have working as coders. I guess if their software is not fixed up in next couple of weeks there might be a whole lot of people, me included, who will migrate to the SIII (given of course that it doesn't have a gazillion bugs as well).
I've been trying all day to recreate the problem but ist not doing it. I put my phone in the sun, I tried using the camera app, I used the video app with its 100% brightness setting, but the phone is still showing Auto brightness.
Any ideas on what triggers 100% brightness?
I have the same problem with mine. It's just randomly turns off auto brightness
Sent from my HTC One X using xda premium
I don't know either what triggers it. It seems to deactivate at either 0 % or 100 %.
I don't have many apps installed, if I just do some web surfing and put it to sleep, when I wake it up the auto brightness is deactivated, in maybe 1 of 4 times. Irritating.
For whatever reason i haven't been getting the auto brightness bug for the past three days. Not sure how it resolved itself since I didn't get any software updates.
If you watch a video you can change the brightness and will stick and not go back to your original settings.
Sent from my HTC One X using xda premium
treebill said:
If you watch a video you can change the brightness and will stick and not go back to your original settings.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
No, that's not the trigger. I investigated that on my phone and found no link.
I take that back. You are right! It seems the brightness setting in the movie play is the culprit. Although it doesn't always do it. One more thing for the chimps at HTC to fix.
Sent from my HTC One X using XDA
Yesterday the auto brightness bug kicked in right before my eyes. I was browsing the web in total darkness in bed, when suddenly I was blinded by 100% brightness. So it's not just the movie player brightness that causes this issue.
Sent from my HTC One X using XDA
Just got the autbrightness bug with the camera app. Everything seems to ****ing set it off now.. :banghead:
Sent from my HTC One X using XDA
Yeah. That's because the camera jacks up brightness for outdoor visibility. They need to have an option to disable that.
Sent From Mars
Hotzigetty said:
Yeah. That's because the camera jacks up brightness for outdoor visibility. They need to have an option to disable that.
Sent From Mars
Click to expand...
Click to collapse
I realize that, however it doesn't always do it. Also sometimes it will kick into 100% brightness without using the camera or movie player. It seems completely random to me.
mine is stuck at zero. started this morning and I did record a video actually.
auto just takes it.to zero.
but also, if i change it directly from the srttings menu, its not.effecting at all, just staying at the same previous custom level.
whrn using widget, just turns it to zero.
opened the video player, changed brightness level and its normal now. it was in the middle, the video brightness level
ok just edited this post and its malfunctioning again.. arrrgh!
Try an application that controls autobrightness, it should fix the problem. I would recommend Lux Dash.
So it is the widget, powertoggle.
Once I fix the issue by changing video brightness, it works fone, till I toggle the widget to use auto-brightness.
Several comments on PlayStore also confirms this with several phones.
Just don't use auto brightness from powertoggle. It is actually doffetent.from what OP describes, but.people may come up to this thread while searching, so I think it willbe useful to post here.
hxhx
i meet this problem
Auto brightness issue
I too had the same issue, i tried to resolve the problem with htc but unfortunately they said that it is a software but and we need to wait for an update....
ynischa said:
Hello little birdies.
I am having an issue with my auto-brightness and I would like to know if anyone else has experienced this.
Whenever my auto-brightness shines through the power of the sun (goes to 100%) it seems to get stuck at full brightness and my already not so good screen-on time takes a dip and I always notice this too late . I use the quick settings widget which is preinstalled and the A for auto-brightness is set but when I click it the screen immediately lowers the brightness, while the A for auto-brightness remains, and a vain in my forehead pops.
Furthermore after checking badass battery monitor it shows that my screen is often at 100% sun shadowing brightness. Today it was at full mutated power the whole time. Anyone got an idea as to what could cause this? Anyone?
PS. You might have noticed in the text above that I think the screen is really bright when at full power and that I can see the screen perfectly during a warm ball-soothing sunny day.
Click to expand...
Click to collapse
Is there a way to keep the screen from dimming after a period of time? I set it to never turn the screen off while charging, but it still dims while the music app is up when it's charging in the car which is annoying. I can't find the setting anywhere in LG's settings or in tweaksbox.
I tried Lux as others have suggested but it still dims in my truck. Very annoying.
This app has helped for me: https://play.google.com/store/apps/details?id=com.synetics.stay.alive
My screen doesn't dim ... did you turn off Auto brightness?
What would cause it to dim by itself? I only run at 61% brightness so maybe I haven't experienced this yet
My auto brightness is off and it still dims. Lux auto is on or off and it still dims.
Kujila said:
My screen doesn't dim ... did you turn off Auto brightness?
What would cause it to dim by itself? I only run at 61% brightness so maybe I haven't experienced this yet
Click to expand...
Click to collapse
Yup, I always have auto brightness off. It just dims after a minute or so of no input - which happens while I'm driving. I always keep it at 100% unless I'm in the dark which may be why you haven't noticed it - the screen may dim to around 60% anyways. I find it weird that you can't adjust how long it waits to dim, or turn that feature off. I'm guessing this is part of LG trying to help with battery life.
DroidApprentice said:
This app has helped for me: https://play.google.com/store/apps/details?id=com.synetics.stay.alive
Click to expand...
Click to collapse
Thanks, I'll check that out when I get a chance.
Hmm weird. I wonder if this is the overheating issue I read about
Kujila said:
Hmm weird. I wonder if this is the overheating issue I read about
Click to expand...
Click to collapse
I've only ran into that a couple times and the screen dimmed to 90-95% and I had to manually turn it back up. This is different where it goes bright again as soon as I touch the screen and the dimming is much darker than 90% - more around the 50% ballpark.
Wow, yeah that sounds extreme...
I know it's a pain, but have you considered doing a hard reset to see if it is indeed setting/software related?
If the OP was referring to the "Screen brightness lowered due to high temperature" message.
Go into the hidden menu by typing 3845#*855# (replace 855 with your devices model number, mine is a D855).
Then scroll down to Thermal Daemon Mitigation OFF and make sure it is enabled (on).
Reboot the device and you can now force maximum brightness all the time.
Kujila said:
Wow, yeah that sounds extreme...
I know it's a pain, but have you considered doing a hard reset to see if it is indeed setting/software related?
Click to expand...
Click to collapse
I actually had to get a second phone a week ago because I cracked my screen (a few hours before my protector came in the mail). At least it was early enough that I got a brand new phone through insurance instead of refurbished, but both phones do it. Could be a Sprint vs Verizon difference - Verizon likes to go crazy with phone mods lol. Though I don't normally run into it with normal usage - only when the screen is set to stay on while charging through the developer option and I'm driving with music.
Mine does that. Sprint phone, happens after a minute of no input, including when the screen is set to stay always on. However, I notice this doesn't happen when running Maps.
I've already gone through two phones, same on both.
WillJeepForFood said:
Mine does that. Sprint phone, happens after a minute of no input, including when the screen is set to stay always on. However, I notice this doesn't happen when running Maps.
I've already gone through two phones, same on both.
Click to expand...
Click to collapse
There are certain apps - and Maps is definitely one - which will not allow the screen to dim or the device to sleep. (YouTube is another for example, also iHeartRadio, etc.) Really the best thing to do is mod using something like Tasker or Stay Alive! as I mentioned in an earlier post for specific apps. I use mine for the Music app since typically I've got mine on the car charger and dash mount and it makes no sense to go through a whole screen unlocking routine to fully operate music after a while.
Download "Swipify" from Play store and install (it is an app launcher that I like better than Wear Mini Launcher).
Swipe it and select "Quick Settings"
Click the first circle, and it will say "Display Always On". Press it again to set to default [emoji106]
Gonna charge tonight and play with it tomorrow. Better bring the battery charger to work, lol
It's nice to have the option to do this, but I was getting a low battery alert about 4 hours in!
-And I had the screen pretty dim...
Sweet, just downloaded it! Pretty cool app all around actually. This is especially great for showing off your watch in public. Thanks!
Do any other apps do this? I had to uninstall it because it was so buggy (left always on even when disabled from their settings, lots of force stops, app unresponsive in their swipe mode, had to uninstall to exit)
(or does anyone know how easy this is to do via the sdk, ill write a little app as I really want thus functionality for parties)
moto
is there any other appa?
You can set for 30 seconds ...using watch maker app...with it and ambient mode on, ..the watch would mostly be on but not cause as much drain as on being always on
Sent from my SM-N910C using Tapatalk 2
pakure said:
You can set for 30 seconds ...using watch maker app...with it and ambient mode on, ..the watch would mostly be on but not cause as much drain as on being always on
Sent from my SM-N910C using Tapatalk 2
Click to expand...
Click to collapse
That settles it then- I'm getting Watch Maker, lol. Don't need 30 seconds on, but I'd love more than 3!
any other cats using this app and running into force close issues and such? id like to have the ability to keep the face on whilst out myself...
So I found this one app " Swipify" that lets me keep the watch face on full time. I like it but it drains the battery a bit faster then I would like. Also when charging the watch the round charge progress bar does not advance so I have no idea how charged it is until I take it off the dock. So I un-installed it. I am looking for an app that will let me keep the watch in the dimmed "Ambient mode" full time and then when I lift the watch to look at it, have it to the full watch face mode until I set my arm back down.
Anyone make such a add-on app by chance? :fingers-crossed:
Or should I start learning how to code apps?
Any chance they (moto) will update with such features?
Thanks,
-DK
I'm not sure if such an app exists, but I'm just about 100% sure that Motorola will never add this feature. The current 5.1.1 software version was significantly delayed because they were trying to optimize battery life. I think it's a combination of a small battery and an old, power hungry processor that is the main problem.
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
SirDigitalKnight said:
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
Click to expand...
Click to collapse
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
closer reading...
thebobmannh said:
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
Click to expand...
Click to collapse
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
SirDigitalKnight said:
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
Click to expand...
Click to collapse
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
thebobmannh said:
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
Click to expand...
Click to collapse
All good, sorry to come off as defensive. :good::highfive:
Been using it with tilt-to-wake turned off and I am finding that by the end of the day I still have plenty of juice left.
With Ambient on and tilt-to wake off I find I have about 35-40% left at the end of a 7am - 11pm day. That is with receiving some email and text notifications (maybe 15-20) during the day.
I know everyone has different uses and ideas of how to use their Moto 360 so everyone's setting are going to be different, but what I am after is a always on "dimmed" or "ambient" mode with the option to turn on tilt to wake so I could test the battery life both ways. I would also like to use my 360 for home automation control and I I know with "Autowear" it is possible but from the little testing I have done so far it would kill my battery way to fast so perhaps on a future SW that will be something I will be doing.
Pausing and starting Netflix or HBOgo or Plex from my 360 is working pretty good for me as a start.
Think I will try and contact the owner of the Swipify app and see what he can do for me...... :laugh:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
pustefix said:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
Click to expand...
Click to collapse
That is very good news! Can not wait to try it out!
Hi All,
Great forum, used it a lot with several devices.
So, I just got my Huawei watch and it is great!!
I do have some questions and tips that it will be great if you could help me with and I couldn't find answers to (sorry if its too long...)
1. Charging - what is the best way to charge it in order keep the battery life? like everyday few mins? everyday to full charge? let it drop until X%?
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
3. Reset - do you reset the devise occasionally? like in purpose. I mean, on my Samsung S6 i know that once in a while I need to reset it to get a better performance.
3. Steps tracking - I was with the blue moon face and noticed that the steps showed is updated after few seconds, meaning that let's say I walked 50 steps, I stop, look at the watch, see the old steps count and after 2-3 seconds it is "jumped" and updated to the new count. in addition, if I stop, wait this few seconds and look at the watch, the count is ok - is this normal?
4. fitness app - which app to use with it that will sync the best with my phone? I installed Google fit and its not doing the job good. it looks like it count steps from the phone and not the watch, or mixed it together, In addition the distance and calories count is way not true, like it show the distance far low then the true (I updated my height and weight, over the app and on the watch) and the calories far more then it is.
In addition I installed the Huawei wear app and it looks much more accurate, showing the steps as the watch, and separate it to walking and steps, distance is accurate and calories as well. but the app doesn't look so good and looks like it missed a lot of other option.
In addition, I don't understand why the Huawei app on the watch is not showing distance but just steps count.
So, which app do you use? I basically want a nice app that will show my daily usage and if can, that will sync with the heart rate measure that i can take from time to time.
Can I sync it to S-Health that I have? or please recommend for another app.
5. Is there any nice watch face that shows not only the steps count but the distance as well?
6. Any other general recommendations?
I think that's it for now
Thank you very much for your help.
Neo810 said:
Hi All,
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
Thank you very much for your help.
Click to expand...
Click to collapse
Although the screen should not be harmed if always on is working all the time, at night you can use theater mode to turn your screen off without powering down the watch. The easiest method of going into theater mode is by quickly double pressing the button on the watch. You can also go into the pulldown menu from the main watchface and swipe over to theater mode to do the same thing. This can save some watch battery if you have the watch off the charger all night or if the battery is getting low during the day and you want to squeeze a few more hours out. It is meant for if you're in the movies and don't want the light from the watch screen to distract you or others from the movie. To exit theater mode and turn the screen back on, just single press the button on the watch.
Btw your post may be removed since we aren't supposed to post questions here in the general forum. There is a Q&A forum however where any questions can be asked about the Huawei watch. http://forum.xda-developers.com/huawei-watch/general/notice-post-questions-t3367506/page1
Enjoy your watch!
Neo810 said:
3. Reset - do you reset the devise occasionally? like in purpose. I mean, on my Samsung S6 i know that once in a while I need to reset it to get a better performance.
Click to expand...
Click to collapse
From my experience, it is ok to factory reset your device once every two months or when you feel it has become quite sluggish although you mustn't expect the performance results to be visible right away after the reset. After the reset, all the applications from your phone will be resynced and the Google Play Services will begin to re-download its updates thus resulting in bad battery life and perfomance for that day until it settles down.
Great.
Thanks for helping.
I always charge the watch to 100% and wait until it goes below 10% to charge it.
When I take the watch off my hand I also shut it down and power it on again when I put it on. This gives me about 3 days of using the watch without charging.
Neo810 said:
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
Click to expand...
Click to collapse
If you put your watch on a desk the display will completely turn off after about 10 minutes, even if you chose always on.
If there is no movement detected for a certain period of time, the display will switch off. This can sometimes also happen if you are in a very steady position. My watch turns occasionally off while I'm playing Playstation and holding the controller in the same position.
foo said:
If you put your watch on a desk the display will completely turn off after about 10 minutes, even if you chose always on.
If there is no movement detected for a certain period of time, the display will switch off. This can sometimes also happen if you are in a very steady position. My watch turns occasionally off while I'm playing Playstation and holding the controller in the same position.
Click to expand...
Click to collapse
I noticed that but as inconsistent.
Sometimes it did it exactly as you describe and sometime not. left it on the desk, half an hour and still always on worked.
I don't know the exact algorithm behind it, but I'm pretty confident that the display will switch off sooner or later. I always put my watch on my desk at night and every morning the display is pitch black.