Yesterday I installed the following .cab on my wizard:
http://www.pocketpcfreewares.com/en/index.php?soft=1137
When I finished the insallation my qtek was freezed. And it did not function any more....
I really want to do a hard reset but my phone can't connect to active sync anymore....
Does anyone have a solution for this problem???
Thank you in advance.....
If the device wont boot any more, the only thing you can really do is a full reset.
I assume you've already tried a reset?
That is the problem.... my device cant connect to active sync aymore... and I dont know another way to do a full reset...
You should have the clearstorage program on your phone. Run that, and it'll hard reset you. There's a button combination as well to do the same, but I don't have a wizard to tell you it. Check the wiki or use search.
V
- Switch off your device
- Press and hold the Comm Manager and Voice Dial button
- Switch on your device (while holding those 2 buttons)
- Press the Send (green button) key to give it a hard-reset.
Good luck.
my fd got a i780 in hong kong and try to put in chinese rom failed.anyone knows how to do hard reset with it?
and any rom with wm6.1 eng for i780 ?
Spoke to Samsung today .... and it would appear that the rumours are true and that no -one including Samsung know how to perform hard reset !!
They also confirmed they would not be able to flash update the ROM to UK version for me .... GREAT !!!
I have located a friendly forum member who has a UK working version and is happy to dump the ROM .... but we don't know how to ....
Can anyone help in a step by step approach to dumping ROM and then creating a flashable version I can use?
Any help from anyone Really gratefully received ....
This is too bad.....has anyone tried using a program for Safemode on this ppc?.....perhaps thats the only way to perform a hardreset for those that are stuck on the welcome screen.....because the safemode will kick in when the ppc detects resets in a loop and then thats when you're able to enter the ppc in safemode just like a normal pc......i guess from here you can either uninstall the program that was incompatible or go through start-setting etc etc-hard reset option......anyone here cares to try this and let us know which safemode program they are using and if it works?.....thanks
You can Install RealVGA, and then also the Language Pack.
So you can change the Language of your i780.
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
utp said:
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Click to expand...
Click to collapse
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
vittogn said:
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
Click to expand...
Click to collapse
No emergency mode does not give hard reset, it seems to be used for downloading ROM to flash using in OS Upgrade............
Should we start a trial and error method on the hard reset?
Update:
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
samueltlc said:
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
Click to expand...
Click to collapse
samueltc, tried, no luck.. it just soft reset the device...
utp said:
samueltc, tried, no luck.. it just soft reset the device...
Click to expand...
Click to collapse
Didn't work for me.
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
ekerbuddyeker said:
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
Click to expand...
Click to collapse
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
damn utp you're desparate XDDD
utp said:
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
Click to expand...
Click to collapse
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
Press and hold both the left and right softkeys.
While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
raiz07 said:
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
Press and hold both the left and right softkeys.
While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
Click to expand...
Click to collapse
just tried this....it doesn't work
irv777 said:
just tried this....it doesn't work
Click to expand...
Click to collapse
The search goes on...
So sorry to hear it doesn't work...
http://forum.xda-developers.com/showthread.php?t=370529&page=9
Should we start a trial and error method on the hard reset?
Update:
200803220357
Result: (No luck)
tried ALL combo of 3 to every keys.
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
in the web i find this ;
Samsung i607 Blackjack hard reset
Resetting your Phone
You can reset your phone’s settings and clear all added
data from memory.
Resetting the Phone
1. On the Home screen, press the Start soft key
2. Select Settings > More... > Security > More... >
Reset.
3. Enter the reset password and press the Done soft key.
The default password is 0000.
4. Press the Yes soft key to confirm. The phone resets and
reboots itself.
Ps. i don't have this device
Hello.
I'm trying to give my BA a hard reset.
Getting in the debuggers screen is no problem but leave it is a problem!
When i set the options right i have to push the mail button to leave the menu but nothing happened when i push this button.
How can i leave this menu and apply the hard reset ?
So for now i can't do anything with my phone because i have to give it a hard reset after upgrade to WM6.1.
Thanks.
Sorry this isn't a solution,but I can't hard reset with POWER+RESET,it just resets normally,but leaves all the rubbish on I'm trying to get rid of,so I would really like an alternative reset method.Help me too!
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
pixie67 said:
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
Click to expand...
Click to collapse
my email botton is n't work tooooo
toooo bad!!!!!
Need a clean i637 WM 6.1 or WM 6.5 Rom
Because my phone is OS killed. (device has a lot of errors )
I can't find any ROM in the web.
Help me !
Thanks in advance
Have you use the hard reset or Master clean?
crt60 said:
To reset the handset’s factory settings, via buttons, follow the steps below:
WARNING: This Reset will Delete ALL added Data from the Handsets Memory
When the handset is powered off, Press and Hold the 5 key then power on the handset
Press either the 1 key (Master Clear) or 2 key (Master Reset) at the Format Menu screen then press the Y key (Yes) at the confirmation prompt
ADMIN settings-
You do not have to unlock security on the phone to be able to do this...
1) From the home screen type in *#1546792*#
2) pick 3 for network and call settings
3) Set network order to Auto, and network mode to auto
Click to expand...
Click to collapse
copyed from other......dont know can help you or not....
Will, I just try these on my i637, It works......I don't know how about yours...
Forget your gmail password / screen lock or you locked out? No Problem!
This option will wipe all your data! S be warned!
If you are in our area, we can recover your lost data!
I am not responsible for anything if you brick/ break/ or through your cell away! Ok? (won't happen if you follow my directions.
OK. Here are the easy steps!
1) Turn Your Phone Off
2) Hold Volume +UP And -Down
3) While holding those 2 volume buttons, Hit the Power Button. Then release all.
4) You will see a black screen with a RECOVERY option (#2)
5) Hit RECOVERY with the power button
6) You will now see a triangle with an image on it
7) Hold the up / down volume and tap the power button. then release all.
8) see the wipe / reset option now? Hit That option!
9) Now Wipe Cache
10) Reboot
11) Tadaaaahhhh!
12 Extra) Here is a cool trick...
13) On the android setup on boot tap the upper left, upper right, lower right, and lower left corners without touching the setup buttons. Check that out!
Enjoy this cool device! (Another successful repair at Legacy Tech Computer Repair. Time for Root! I'll post that method later!)
UPDATE! Just found out this method won't wipe your internal storage for the picks / music etc! EVEN BETTER!
Correction in Process
Hi , thanks your post helped me get my phone unlocked but however it needs some corrections ( atleast I feel so )
Have highlighted them in BOLD BLUE
rgsgroup2005 said:
1) Turn Your Phone Off
2) Hold Volume +UP And -Down
3) While holding those 2 volume buttons, Hit the Power Button. Hold onto them till the Menu comes up
4) You will see a black screen with a RECOVERY option (#2)
5) Hit RECOVERY with the Volume Up Button ( to Select as written in the Second Row from top in menu)
6) You will now see a triangle with an image on it
7) Hold the down Volume Down / Power and tap the Volume Up Button. then release all. ( Basic Logic derived from the orignal post was Select button is VOLUME UP thus - whereever Power Button is doing the selection in above post use Volume Up Button )
8) see the wipe / reset option now? Hit That option!
9) Now Wipe Cache
10) Reboot
11) Tadaaaahhhh!
Click to expand...
Click to collapse
P.S:: Additional Info I performed this on JellyBean variant
jskandhari said:
hi , thanks your post helped me get my phone unlocked but however it needs some corrections ( atleast i feel so )
have highlighted them in bold blue
p.s:: Additional info i performed this on jellybean variant
Click to expand...
Click to collapse
worked for me!!!
thanks saved my lot of time
Buttons not working
WHEN I PERFORMED THIS THE RECOVERY MENU APPEARS BUT DOESN'T SHOW ANY RESPONSE WHEN I PRESSES THE VOLUME DOWN BUTTON TO SELECT RECOVERY!!!
WHAT SHOULD I DO ??????????
Mohsin
jskandhari said:
Hi , thanks your post helped me get my phone unlocked but however it needs some corrections ( atleast I feel so )
Have highlighted them in BOLD BLUE
P.S:: Additional Info I performed this on JellyBean variant
Click to expand...
Click to collapse
Thanks a lot dear
:good:
carry on