Hard reset doesn't work - MDA III, XDA III, PDA2k, 9090 General

Hello.
I'm trying to give my BA a hard reset.
Getting in the debuggers screen is no problem but leave it is a problem!
When i set the options right i have to push the mail button to leave the menu but nothing happened when i push this button.
How can i leave this menu and apply the hard reset ?
So for now i can't do anything with my phone because i have to give it a hard reset after upgrade to WM6.1.
Thanks.

Sorry this isn't a solution,but I can't hard reset with POWER+RESET,it just resets normally,but leaves all the rubbish on I'm trying to get rid of,so I would really like an alternative reset method.Help me too!

Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!

pixie67 said:
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
Click to expand...
Click to collapse
my email botton is n't work tooooo
toooo bad!!!!!

Related

how to hardreset win2005 urgent need help

how to hardreset load the default settings urgent need help
power + record +camera THEN reset .... Try that never reset the xda2
just restart
anyone know how
urgent need help
Read the "Microsoft Windows Mobile Version 5.0 I can share" topic. There is a method to hardreser WM2005.
WM2005 Hard Reset
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options(no backlight).
1 Kit = YES ------------------ change this to NO
2 Register Hive= No ---------should remain NO
3 Storage = No --------------change this to YES
after this press the big round button between the call and call end buttons to SAVE. Device Restart, then wait.
You have successfully hard reset your PPC.
Re: WM2005 Hard Reset
I'll explain this menu.
1. Enables the debugging mode of WM2005. I have not played with that, it needs PlatformBuilder to be installed on PC.
2. Clears the registry hives to their default values. I have not tested that, but it should work like hardreset but will keep all modified files.
3. Format the storage. This would also reset the registry because it is contained on storage. Similar to hardreset in previous OSes.
It is rather difficult to press all these buttons without someone's help.
easy
easy... :roll:
:arrow: put the xdall in the table, insert the stylus in reset sw then make your belly or your stomach or whatever to support/push it,
:arrow: left hand hold the on/off sw and record sw
:arrow: and right hand thumb pressing the camera sw and the same time hold or support the device
:arrow: then push it all and count to ten....
hahahaha...just like you are going to acrobatic position.
But i did that.

samsung i780 how to hard reset

my fd got a i780 in hong kong and try to put in chinese rom failed.anyone knows how to do hard reset with it?
and any rom with wm6.1 eng for i780 ?
Spoke to Samsung today .... and it would appear that the rumours are true and that no -one including Samsung know how to perform hard reset !!
They also confirmed they would not be able to flash update the ROM to UK version for me .... GREAT !!!
I have located a friendly forum member who has a UK working version and is happy to dump the ROM .... but we don't know how to ....
Can anyone help in a step by step approach to dumping ROM and then creating a flashable version I can use?
Any help from anyone Really gratefully received ....
This is too bad.....has anyone tried using a program for Safemode on this ppc?.....perhaps thats the only way to perform a hardreset for those that are stuck on the welcome screen.....because the safemode will kick in when the ppc detects resets in a loop and then thats when you're able to enter the ppc in safemode just like a normal pc......i guess from here you can either uninstall the program that was incompatible or go through start-setting etc etc-hard reset option......anyone here cares to try this and let us know which safemode program they are using and if it works?.....thanks
You can Install RealVGA, and then also the Language Pack.
So you can change the Language of your i780.
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
utp said:
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Click to expand...
Click to collapse
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
vittogn said:
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
Click to expand...
Click to collapse
No emergency mode does not give hard reset, it seems to be used for downloading ROM to flash using in OS Upgrade............
Should we start a trial and error method on the hard reset?
Update:
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
samueltlc said:
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
Click to expand...
Click to collapse
samueltc, tried, no luck.. it just soft reset the device...
utp said:
samueltc, tried, no luck.. it just soft reset the device...
Click to expand...
Click to collapse
Didn't work for me.
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
ekerbuddyeker said:
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
Click to expand...
Click to collapse
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
damn utp you're desparate XDDD
utp said:
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
Click to expand...
Click to collapse
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
 Press and hold both the left and right softkeys.
 While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
raiz07 said:
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
 Press and hold both the left and right softkeys.
 While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
Click to expand...
Click to collapse
just tried this....it doesn't work
irv777 said:
just tried this....it doesn't work
Click to expand...
Click to collapse
The search goes on...
So sorry to hear it doesn't work...
http://forum.xda-developers.com/showthread.php?t=370529&page=9
Should we start a trial and error method on the hard reset?
Update:
200803220357
Result: (No luck)
tried ALL combo of 3 to every keys.
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
in the web i find this ;
Samsung i607 Blackjack hard reset
Resetting your Phone
You can reset your phone’s settings and clear all added
data from memory.
Resetting the Phone
1. On the Home screen, press the Start soft key
2. Select Settings > More... > Security > More... >
Reset.
3. Enter the reset password and press the Done soft key.
The default password is 0000.
4. Press the Yes soft key to confirm. The phone resets and
reboots itself.
Ps. i don't have this device

SOLVED: How to format Blueangel?

How to format Blueangel?
Answer
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
chk wiki for this
can u give me the link plz
coz i have like 2 or 3 messages programs
and calanders and calculators etc
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
I cant believe you have been a member of this site for nearly two years and you dont even know how to hard reset one of these devices ,but here it is anyway
how to hard reset (format)
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner).
Click to expand...
Click to collapse
i have tried that but it still has the same files there and all the sms etc it just does a soft reset when i do that
no, yes, yes
have you selected yes for the “Clean Registry Hive” and “Format Storage” options? it's done by using the camera and record button on the left side of your ba.
cstoica said:
have you selected yes for the “Clean Registry Hive” and “Format Storage” options? it's done by using the camera and record button on the left side of your ba.
Click to expand...
Click to collapse
i put the
nive on NO
Format Storange on yes
Clean Reg on yes
then i did the following
Anti-Imperialism from the Metropole
Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner).
Click to expand...
Click to collapse
you dont hard reset after you have selected the Hive to no and the format storage to yes , you press the action button(in the middle of the direction pad) that is why you still have the same files when it restarts you are not formatting anything, you are just resetting the device
ok ok
so let me get this right
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
before i do this how do i back up my text messages and restore them?
My 4 button above green button and red button (including message button) isn't working and i need to make a hard reset...
thank you
pVilaça said:
My 4 button above green button and red button (including message button) isn't working and i need to make a hard reset...
thank you
Click to expand...
Click to collapse
same with .... any idea for this problem plz??
----------

M3600/spv M700 Wont Turn On Please Help

Hi All I Really Need Some Help Please My Phone Wont Turn On Its Stuck On Starp Up Boot Screen.,which Means There For I Cant Reset It.and Active Synce Doesnt Reconise The Phone So I Cant Even Install A New Rom On It,iv Presses The Reset Button Loads Of Time With No Joy Can Anyone Help Me Out Please...thanx It Was Working Fine One Day Then Froze On Me And Now It Wont Come On To Windows
Copied from the Wiki page.......
Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot
(The L/R soft keys are the "--" keys just above the the Green phone and Red phone buttons) You can also use clear storage in settings. WARNING!!! HARD RESETTING WILL ERASE EVERYTHING ON YOUR DEVICE. MAKE SURE YOU HAVE A BACKUP!
ok thank you
will try it now ,,but phone is totally stuck on start up screen wont even go in to windows,,but will give it a go ,,cheers...
hi there
thanx allot for your help it did work and managed to reset the phone cheers...your a life saver thanx ....

Big Problems

Hello helpers, I have multiple problems with my orbit, though its all probably linked and therefore one problem.
first of all the darn thing crashes all the time, but I was okay with that, all i had to do was reset then reset the date and time. However after one of these crashes I now get
" The file 'MSPOUTLOOK' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file."
and everything I try and do it has a new one, like contacts is " The file ':MSCONTACTS' cannot be opened................etc"
So i resigned myself to having to do a hard reset, but oh no it does not work.
Can someone at least confirm that the procedure is supposed to be, hold down the power button, then press in the reset button for 5 seconds? If that is the procedure, all that happenes is, as soon as i press in the reset button (with the power button already held down) it just does a soft reset and I'm in the same position.
It wont connect to my pc so theres no way of flashing firmware or any such action Hopefully someone can help, thanks very much, Paul.
Hard reset procedure:
- Hold down both soft keys
- Press the reset button once using the stylus
- Release the soft keys
- Press the green send button when the following message appears:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press Sent to restore manufactures default, or press other keys to cancel.
Goog luck!
Sorry to be a pain, but that didn't work either, I presume by soft keys, you mean the ones with just a '-' on them just below the screen next to the jog wheel. I have a feeling there is going to be no way to sort this now. When I try what you said it just resets stright away as soon as the reset button is pressed, Thanks, Paul.
okay i did finally get it to work !!!!
Good to hear. Hope everything works fine after the hard reset!

Categories

Resources