Develop Bugs

HTC Touch Diamond Screen not responding

Hi All,
My diamond screen suddenly stopped responding. The screen calibration is also not working. I tried a hard reset and after that, it stopped at the screen 'Tap the screen to setup your windows phone'. I am not even able to do that. Any help is appreciable. Thanks in advance.

jitheshg said:
Hi All,
My diamond screen suddenly stopped responding. The screen calibration is also not working. I tried a hard reset and after that, it stopped at the screen 'Tap the screen to setup your windows phone'. I am not even able to do that. Any help is appreciable. Thanks in advance.
Click to expand...
Click to collapse
Try re-flashing a rom, or maybe your touch screen (digitizer) needs replacing, if you do this yourself i would recommend buying the digitizer and lcd together as one, it will make a whole lot easier trust me lol. The lcd screen is easy to break.

Had this problem, too, but since I couldn't get back to stock SPL at that time I put my Diamond into a shelf for about 2 days.
When I then tried to get back to stock SPL the screen suddenly responded again.
So, try to take off the battery for a long time (more than a day) and hope it recovers.
Didn't have the problem again.

Change the Touch Screen
jitheshg said:
Hi All,
My diamond screen suddenly stopped responding. The screen calibration is also not working. I tried a hard reset and after that, it stopped at the screen 'Tap the screen to setup your windows phone'. I am not even able to do that. Any help is appreciable. Thanks in advance.
Click to expand...
Click to collapse
I had a similar problem solved with changing the touch screen since the phone was under warranty I have to revert to the stock SPL and stock ROM before I gave it for service. If your phone is not under warranty you can buy the touch screen from ebay.com with a manual and all required instruments for replacing the same.
This happened to me because I was talking to someone over an hour in a humid place which caused sweat to get into the phone through the speakers.
Regards,
V.Balaji

Solution
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!

salterlee said:
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
Click to expand...
Click to collapse
Thanks alot the method really worked , i really owe you dude thanks again

Putting the phone in the fridge makes screen work!
I know this is an old thread but why does putting the phone in the fridge for a few minutes make the touch screen work? Even if I put it out of a moving car and it cools down, then it works for a bit.
Anyone know why this is and how I can fix the phone permanently?

CDMA galaxy nexus - unresponsive to touch

Hello everyone,
Basically went to unlock my phone today and touch screen is not responding, however the hardware buttons work fine. Now i've done some research and found other posts of people with the same problem, however their touchscreen problems seem to be fixed(temporarily, at least) with a battery pull.. mine however is still unresponsive after half a day and multiple battery pulls.
Id rather not have to send in for certified to replace an otherwise perfectly working phone.
Any ideas/suggestions would be greatly appreciated!

bigdeezer20 said:
Hello everyone,
Basically went to unlock my phone today and touch screen is not responding, however the hardware buttons work fine. Now i've done some research and found other posts of people with the same problem, however their touchscreen problems seem to be fixed(temporarily, at least) with a battery pull.. mine however is still unresponsive after half a day and multiple battery pulls.
Id rather not have to send in for certified to replace an otherwise perfectly working phone.
Any ideas/suggestions would be greatly appreciated!
Click to expand...
Click to collapse
are u undervolting?

Nope, sorry forgot to say. Completely stock never unlocked or rooted.
Also i tried getting into recovery to try and do a factory reset but when i select recovery i just get the android on his back with the red triangle..
so instead i just went through the steps and unlocked the bootloader and booted up (in order to give me the factory reset without having to touch the screen)
It unlocked and booted up fine but still no response..
No new recent app installed and never had this happen before.

Mine did this after a few days of owning it, and luckily the store took it back and swapped it out with a perfectly working unit. Is yours within a few weeks of purchase?

Figured this out randomly. Remove battery cover. With phone turned on, press on the area to the to the left of the camera lens until the screen is responsive. My screen becomes unresponsive when the phone is dropped and this fixes it.

dailong said:
Figured this out randomly. Remove battery cover. With phone turned on, press on the area to the to the left of the camera lens until the screen is responsive. My screen becomes unresponsive when the phone is dropped and this fixes it.
Click to expand...
Click to collapse
hrmm this does not seem to fix either. I also have never dropped my phone, although this seems to be worrisome if the issue is hardware related.
@ tmellen i purchased the phone from amazon and am a few days past my return date :-/
Guess ill just give them a call and hope for the best. Thanks for the ideas everyone.
(update) called amazon and they are sending me a brand new phone.
Knowing this i thought i'd try dailong's method again only this time i was quite a bit more "rough" with pressing down on that area, and it actually worked!
Ill still be taking the new phone once it gets here but for anyone who is having this problem there's a sweet spot on the left edge of the phone towards the top (looking at it with the back cover off) there should be a circle shape. press on that area really hard and it should fix.. weird

Experienced the same on my GSM version a few minutes ago. I had to call my mobile to get it to respond. After that it worked again as normal. I'll see if I get this issue again in the next few days. Hope it's just random

Had the same happen earlier to mine and I was on AOKP. I've had this happen to other phone before, shouldn't be a a cause for alarm unless it happens very frequently. Btw, next time it happens to me I'll give that left side of the camera trick a try.

mine got fixed by removing battery.

[Q] No response from touch screen problem

I've had the phone since June last year and it's been working fine. However after flashing different firmware and changing roms the touch screen of the phone seemed to die by being a lot less responsive until it became completely unresponsive. The phone starts up fine and the screen displays everything correctly but the touch screen just doesn't work. Occasionally I can unlock by sliding it open but after that I can't get on anything. Would this be down to an issue with the digitizer?
Thanks for any replies in advance.

Could be the digitizer, or it could also be the ribbon cable inside the slider.
Sent from a Galaxy far, far away

Thanks for the reply, I've just ordered a new digitizer with ribbon so I'll see how it goes and report back. Cheers again.

Bahra said:
Thanks for the reply, I've just ordered a new digitizer with ribbon so I'll see how it goes and report back. Cheers again.
Click to expand...
Click to collapse
Hey I know this is years ago but can you remember if this worked for you? I'm having this issue.

Faulty screen?

I went to use my phone today and somehow it froze. I took the battery out and turned it on. I started displaying wierd lines on the screen. I am not sure whether or not if its a ribbon cable issue or my screen. I have attached a photo below. Main problem is my phone is still on a contract with 7 months left. I'm hoping it gets repaired as my phone is rooted at the moment.
https://docs.google.com/file/d/0B1C0C-GGmxkaY3dyd3NSaXFoU0U/edit?usp=sharing

knightslay2 said:
I went to use my phone today and somehow it froze. I took the battery out and turned it on. I started displaying wierd lines on the screen. I am not sure whether or not if its a ribbon cable issue or my screen. I have attached a photo below. Main problem is my phone is still on a contract with 7 months left. I'm hoping it gets repaired as my phone is rooted at the moment.
https://docs.google.com/file/d/0B1C0C-GGmxkaY3dyd3NSaXFoU0U/edit?usp=sharing
Click to expand...
Click to collapse
i got the same problem by 2 weeks back.. now slowly other problem came followed by that and now screen is full black now, and for me its ribbon cable fault.
Just no booked a ribbon cable in online.
Better you unroot your mobile and turn S-on and submit it to the service center before the problem get worse.

I should get s on back but I'll miss all the speed from the custom ROM and my over clock. I guess I might as well do that. I just found sense 2.1 so laggy and buggy.
Sent from my HTC Vision using xda premium

HTC 10 Half of Display Not Working After Screen Replacement

The battery on my HTC 10 was completely shot and needed to be replaced. I'm a careful person by nature and this being my first phone repair, I bought an extra screen just in case something happened getting it apart. Followed a guide by jerryrigeverything on how to take apart the phone, got the battery replaced, everything seemed to go smoothly. When I went to test the display before screwing everything together, the new screen I installed lit up, but the right half of the display only showed as a repeating segment from the middle of the screen. Thinking the connector was loose, I disconnected and reconnected the display and made sure everything was tight: same problem. I reinstalled the original display, which I made sure had worked after cutting through the adhesive before I disconnected it, and now the old display is also showing the same issue.
The touch screen on the broken side of the display still works, I'm able to type PIN numbers and whatnot even though I can't see them properly. Only thing I can think of is maybe the connection actually got some debris or something inside of it? I don't think I damaged anything, as I was super careful, but it was also my first time opening up a phone.
Sorry for the inefficiently worded post. Any help would be really appreciated.

Did you resolve this?
I have exactly the same issue you describe after my screen replacement (with two new screens) Believing the first was a dud.
I have done many screens/batteries on my m7, m8's previously never having a problem.
I'm currently back to running my M8 and miss my 10!
Anyone reading this and has any suggestions they are all welcome!!
Thank you in advance

Exactly the same issue this guy has
https://youtu.be/RpdCuMiTOn8
I'm now wondering if it is just bad aftermarket screens?
Has anyone else replaced their screen successfully, if so where did you get the screen?
Thanks Rory

I have been having the same problem. I just tested screen number 4 that has the same exact problem. Is there a specific brand that is known to test well?

I dropped my 10 in water at work...believe it was a salty water at that. It stopped working completely. I opened the phone to check the internal components for damage and I broke the LCD doing so. I replaced the battery and the screen at almost the same time. I think it may have been a week or two apart.
The battery is still working. The screen worked initially but the phone kept getting really hot and the heat kills the phone. I tried keeping it cool at all times which kept it operational. It hasn't been activated since I quickly replaced the phone with another of my lines upgrades. I went back to the phone to check it out and try using it as a replacement for my daughter but the screen no longer works.
The battery charges just fine...the led light indicates that well. I've tried reinstalling it several times with no success getting the screen working again. I tried the original screen to check and I could see light and it was responding but its not usable so I'm stuck with a phone that has a new non-working display. I think the brand was called DIYRepair or similar.
If anyone has encountered this and has advice...I'd be happy to try anything.