Lost MTP mode usb support - Galaxy S 4 Mini Q&A, Help & Troubleshooting

yesterday i rooted my s4 mini (Stock Kitkat 4.4.2) using CF-Auto root method.
But now i observed that mtp mode is not working.........i tried everything like, reinstalling every single pc drivers even kies, also i unrooted and flashed to totally official firmware again using odin........but still my problem is not solved.......plzz help me guys
also my data cable is fine...........it starts charging but my drive is not shown in my computer.
i tried on different laptops also win7/8

Related

[Q] Odin doesn't really recognize my Note2

Hello everyone,
I just decided to root my phone and found guides for doing so (and I'm very thankful for those!).
My problem is, that Odin won't recognize my phone, if i connect it after odin is already started
However, if i have my phone in download mode, connect it to my computer and THEN open odin it's recognized just fine.
Any ideas what could cause the problem? And is it even a problem or can i just proceed?
Its the same if i try to connect when not in download mode, odin will only recognize my phone, if i have it connected before odin is started
I have a Note 2 (N7100) on Android 4.1.2
Thanks a lot!
No problems this way.
You can go on with further process.
Try to reinstall correct USB drivers
I just proceeded anyways, meaning connecting the phone in download mode to the PC and then opening odin and it all worked out
thank you for the help!

[Q] Think I've bricked it.

Hi, I installed Cyanogen without a problem however the USB connection did not work as well as some other things so I found the Note 2 stock ROM and went to try flash that.
However the USB connection not working seems to still be a problem as the ROM doesn't flash (failed) and isn't recognized by Kies if I try to do an emergency firmware recovery.
Help guys! I'm stuck at the either "downloading" screen when I turn my phone on to load the ROM or either "there was a firmware error", I cannot load my phone past that, arrrrgh!
looks like it is a driver issue . You can try installing the drivers manually or with a different pc which previously recognized Note 2 ..
Go to downloading mode and let the usb drivers install from online or windows update .. or try connecting a different Note 2 and check if your PC recognizes Note 2

Tab pro 10.1 SM-T520

Hello,
Ive got an:
Samsung Tab Pro 10.1 - SM-T510 WiFi version
I installed CM12 on my tablet but my girlfriend was complaining about the tv remote control function... So what i was trying to do is putting back the original firmware but somewhere i did do something terrible wrong.
The battery was complete empty... so ive tryed to put it on and at startup its giving me this screen error.
http://s24.postimg.org/6cz8zp1px/tap.jpg
''Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.''
Then ive downloaded Odin 3.07 and tryed it also with version 3.10 to install the new Firmware's:
* T520XXUANI1_T520PHNANI1_HOME.tar.md5
and also tryed
* T520XXUANAE_T520PHNANA2_HOME.tar.md5
and the
* CF-Auto-Root-picassowifi-picassowifixx-smt520.tar
But then ODIN is stuck at this screen.
http://s17.postimg.org/p9h2bap33/Odin.jpg
''boot.img''
Also tryed it through KIES but kies doesnt connect to the tablet.
And also installed the samsung USB drivers.
Even booting in TEAMWIN doesnt work anymore...
Also if i try to power on the tab without a cable connected it wont go on
So now i need to know is : Can i fix this or is it bricked ?
thx,
Sluipgeit said:
Hello,
Ive got an:
Samsung Tab Pro 10.1 - SM-T510 WiFi version
I installed CM12 on my tablet but my girlfriend was complaining about the tv remote control function... So what i was trying to do is putting back the original firmware but somewhere i did do something terrible wrong.
The battery was complete empty... so ive tryed to put it on and at startup its giving me this screen error.
http://s24.postimg.org/6cz8zp1px/tap.jpg
''Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.''
Then ive downloaded Odin 3.07 and tryed it also with version 3.10 to install the new Firmware's:
* T520XXUANI1_T520PHNANI1_HOME.tar.md5
and also tryed
* T520XXUANAE_T520PHNANA2_HOME.tar.md5
and the
* CF-Auto-Root-picassowifi-picassowifixx-smt520.tar
But then ODIN is stuck at this screen.
http://s17.postimg.org/p9h2bap33/Odin.jpg
''boot.img''
Also tryed it through KIES but kies doesnt connect to the tablet.
And also installed the samsung USB drivers.
Even booting in TEAMWIN doesnt work anymore...
Also if i try to power on the tab without a cable connected it wont go on
So now i need to know is : Can i fix this or is it bricked ?
thx,
Click to expand...
Click to collapse
Use a different USB cable and a different USB port, and (if that doesn't work) a different PC.
You're not bricked, there's the good news.
Sent from my Nexus 6 using Tapatalk

[HELP] Cannot root my G3/D855

Hey guys, just want to root my LG G3 (never rooted before) these day but failed for many ways. But computer said the MTP is not working while I entered download mode (code 10 error). I have tried a lot of way to solve the problem but still not success. Mine is in 5.0 with software version V21A. Someone told me V21A is unable to root. Is there any solution to it? Wanna downgrade back to kitkat cuz 5.0 drains battery in really a short period of time.
Hi, be sure to install the right mtp drivers for your phone. Do a quick web search on that. Also, disable any antivirus on your phone and make sure that you use the right usb cable. Some usb cables are not designed for data transfer - just for charging. The stock cable should work.

Help! Samsung Galaxy A3 2017- USB dead- System boots only when plugged in

hey everybody!
i was using my galaxy a3 2017 (SM320FL) for half a year with lineage os (15.1) and flashed the latest build (Lineage 15.1-20180821-UNOFFICIAL-a3y17lte) some weeks ago.
i allways noticed little bugs etc. but all in all it worked for me.
since a week now, the phone won't boot into the system anymore if not connected to charge. i can still boot in download mode and recovery without plugging it in but not into the custom rom. as soon as i deconnect it (when using the custom rom) it reboots and gets stuck at the samsung screen.
that wouldn't be that bad if the usb connection was not dead as well. that happened a few month ago allready. i tried to connect it via odin, kies and smartswitch in download mode and recovery. but nothing. i also reinstalled the drivers via kies. i also flashed "ressurection remix oreo" to check wether it works with different roms but it didnt.
does anybody here have an idea what i can do to make the usb connection work? or is there a possibility to flash the firmware without it?
device SM-320FL
Android 8.1.0
TWRP 3.2.3-0
Bootloader: 0x030c (?)
EDIT: the problem turned out to be broken cables. i tried with a third one and usb is working fine.

Categories

Resources