Hi, I installed Cyanogen without a problem however the USB connection did not work as well as some other things so I found the Note 2 stock ROM and went to try flash that.
However the USB connection not working seems to still be a problem as the ROM doesn't flash (failed) and isn't recognized by Kies if I try to do an emergency firmware recovery.
Help guys! I'm stuck at the either "downloading" screen when I turn my phone on to load the ROM or either "there was a firmware error", I cannot load my phone past that, arrrrgh!
looks like it is a driver issue . You can try installing the drivers manually or with a different pc which previously recognized Note 2 ..
Go to downloading mode and let the usb drivers install from online or windows update .. or try connecting a different Note 2 and check if your PC recognizes Note 2
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL
hi, few weeks ago i got some troubles with my galaxy nexus and i had to buy a usb jig to restore it. today it arrived and i could access download mode, connect it to laptop n tried to flash a stock rom with odin, but the usb suddenly disconnected and connected again. i waited for a while but the installation didn't proceed anymore, so i tried to unplug the cable. now i can't access download more anymore, even with the jig. Odin still sees the galaxy nexus when i connect it to the laptop but cannot do anything... everytime i try to flash any rom it fails. any help please?
EDIT:
sorry guys... odin 3.07 solved it
i've tried all the older versions and nothing worked. fortunately i've found this one
u can close or delete the topic please, and sorry again
Hello,
Ive got an:
Samsung Tab Pro 10.1 - SM-T510 WiFi version
I installed CM12 on my tablet but my girlfriend was complaining about the tv remote control function... So what i was trying to do is putting back the original firmware but somewhere i did do something terrible wrong.
The battery was complete empty... so ive tryed to put it on and at startup its giving me this screen error.
http://s24.postimg.org/6cz8zp1px/tap.jpg
''Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.''
Then ive downloaded Odin 3.07 and tryed it also with version 3.10 to install the new Firmware's:
* T520XXUANI1_T520PHNANI1_HOME.tar.md5
and also tryed
* T520XXUANAE_T520PHNANA2_HOME.tar.md5
and the
* CF-Auto-Root-picassowifi-picassowifixx-smt520.tar
But then ODIN is stuck at this screen.
http://s17.postimg.org/p9h2bap33/Odin.jpg
''boot.img''
Also tryed it through KIES but kies doesnt connect to the tablet.
And also installed the samsung USB drivers.
Even booting in TEAMWIN doesnt work anymore...
Also if i try to power on the tab without a cable connected it wont go on
What can i do to fix my problem ?
This Tab Pro section does not get an lot of posts, so you might have to wait a while for an answer, or you can go to the Tab S thread and ask them your questions about ODIN, the method is the same for both tablets, just don't flash an Tab S rom
I have an Tab S and not an Tab Pro, but i have loads of post in this section, I just don't know much about flashing rom`s , I know you have to boot into download mode so ODIN can start the rom update.
http://forum.xda-developers.com/galaxy-tab-s/help
John.
Hello there.
I have bought used Samsung which came with a software problem. Already tried to flash oem firmware but there is no success.
Some information about the note 10.1 that i have tried until now:
Seem there is no recovery, when keeping +VOL & Power it wont go to recovery mode, while keeping -VOL & Power it goes to DOWNLOADING
Tried to flash stock firmware & recovery still same, the procedure ends with no error (ODIN) but the problem still exists.
Already flashed the .pit downloaded from internet N8018.pit which did not solve the problem.
While trying to boot (connected to pc) it comes window with MTU drivers which cannot be installed. (windows7)
Any idea what could solve my problem?
Does that mean that tablet has problem with emmc chip ?
Hope for any answer
regards
gt-N8013 is not note 2014 edition.
you can try flashing on another pc. odin should solve all problems.