Develop Bugs

[ROM][5.0.2][OFFICIAL] Beanstalk 5.0.0050 (3/21/2015)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am proud to present to you BeanStalk Builds put together by Scott.Hart.Bti. This is a build composed off of the CM10.1 builds and i have added alot of features on top of it. So you get speed, stability, and ultra customization ability. Many of the additional code additions came from slim ROM and also Derteufels build and have been modified to work with my current setup. A huge thanks to Derteufel and the Slim ROM guys for their work and dedication. Also a big thanks to everyone involved with CM as that is the building stone in this project. Thanks to skyliner33v for the bootanimation and upcoming wallpapers!
I plan on updating this and adding features on a pretty regular basis, so if you happen to like this, keep checking back.
Like what you see? Click the thanks button or Donate to scott.hart.bti by clicking HERE
Interested in Porting/Building BeanStalk on another device or if you have building/development concerns or issues, Please visit the BeanStalk Development Thread
Will be updated shortly
*
Download 4.4.2 BaNKS Gapps
***For a complete listing of all supported BeanStalk devices and downloads, please visit www.goo.im/devs/beanstalk ***
Beanstalk for the E980 has become official! Please go to the following link to download the most current version.
BeanStalk Builds for the E980
Use the following mirror until Goo starts cooperating again
[*]BeanStalk-5.0020-20150121-e980.zip
Extras
Old Downloads
Beanstalk 4.4.4001 Dev-Host
BeanStalk Build 4.4.205 - Android 4.4.2 - 12/31/2013
BeanStalk Build 4.4.200 - Android 4.4.2 - 12/28/2013
BeanStalk Build 4.4015 - Android 4.4 - 12/05/2013
BeanStalk Build 4.3.1001 - Android 4.3 - 10/03/2013
Changelog
Coming Soon
***Please keep in mind that this is the initial release and bugs are to be expected. I am working on this myself and do not have a team that is helping me. Before reporting bugs, please make sure you verify everything on your end and make sure you do a full wipe and format first to make sure it is a legitimate issue. I'm going to say this once and only once... I am doing this for fun. It is my CHOICE to share my work with everyone. If you decide that you do not like my work, good for you.. Move on and flash something else. I will not tolerate ungrateful people in my thread.***
Misc:
If you are coming from another 4.3 ROM, you shouldn't have to worry about the recovery, but if you are coming from a 4.1.2 or 4.2 ROM you will need to be sure you have the lokified CWM recovery or madmack's 2.6.1 lokified TWRP recovery for 4.3 ROMs. If you are on a different version of TWRP your touch controls probably won't work.
Coming from Stock 4.1.2 or 4.2 based Jellybean ROMs
Install lokified CWM from freegee or madmack's updated TWRP
Reboot to recovery
Make a nandroid backup
In recovery: Factory Reset
Install ROM
Install Gapps for 4.3 or 4.4
Reboot
Coming from another 4.3 or higher based ROM
Reboot to recovery
Make a nandroid backup
TWRP - Wipe then Swipe to Factory Reset
CWM - Wipe Data/Factory Reset, Wipe Cache Partition, Advanced/Wipe Dalvik Cache
Install ROM
Install Gapps for 4.3 or 4.4
Reboot
Here are some additional steps I take to make sure I get everything running correctly.
This allows me to correctly install Viper4Android and I have no issues making changes to my system folder. It may not be necessary for everyone but I have found it helpful.
After Rom boots, go through the setup wizard then let it settle for a bit (10 min or so)
Download SuperSU from the Play Store
Open SuperSU and a popup will ask you to update the SU binary. Choose OK
After you get confirmation that it installed correctly, close SuperSU then uninstall it.
Download BusyBox from the Play Store
Open BusyBox make sure it shows Busybox 1.21.1 will be installed to /system/xbin and let it gather information for the installation
Click Install on the bottom left, then Smart Install
Reboot
Busybox can be uninstalled if desired
SlimROM source can be found HERE
DerTeufel's source can be found HERE
Beanstalk source can be found HERE
Donate to scott.hart.bti by clicking HERE
​
Enjoy!
Big thanks to kaymmm for letting me take over these builds!

I'm uploading this by request from General. I take no credit for the ROM, I just built it from sources that others contributed.
Just a heads up that Google Play related stuff is still force closing occasionally. But I wanted to leave this ROM here in case anyone is interested in playing with it and helping to get it working mo betta.
If you use the Slim Gapps (4.3 version) you can use the built-in dark theme with Gapps, but the goo.im version won't get darkified.
If you're interested in building this rom, you will probably have to update several of the directories from the CM sources to get rid of the proguard errors. I can't remember all of them right now, but I think Browser, Email, Calendar, and Dialer, plus frameworks/av and frameworks/native. The easiest and quickest way to do this is to cd to the appropriate directory:
Code:
cd packages/apps/Email
Then add the CM repo, fetch, and merge:
Code:
git remote add cm https://github.com/CyanogenMod/android_packages_apps_Email.git && git fetch cm && git merge --no-edit cm/cm-10.2
Also, I ran into issues with gcc-4.6 but got successful builds with gcc-4.7.

Downloading now thank you for your work
Sent from my LG-E980 using xda premium

Kaymmm,
Thanks. I came from the infuse and Scott did wonders for that device.

good job !
but so frustrating to see all these new roms and F240 users waiting in vain for a cool one for our phone
but i will try it like all others roms looks great, the biggest bug for my phone is external sdcard not recognized
EDIT: this look like the best rom over here !!

Great ROM... Only thing wrong is that holo launcher Fc and every few mins the whole phone is in responsive for about 15 sec... Is there anyway to rip the system sounds out and make a cwm zip for them... Great work!!!
Sent from my LG-E980 using xda premium

I was having really frequent force closes or hangs at first but after rebooting and clearing caches they were much less frequent, but still present. I think I have an idea of what's causing it, but my knowledge of how to fix it is lacking.
If you want to extract the sounds, they're all in /system/media/. You can try copying them to your sdcard (internal or ext.) using the same folder structure and they should show up in other ROMs. Or you can put them into a flashable zip by copying the files from the existing rom zip or your phone and editing the updater script appropriately. There are directions on this process all over xda. I'd do it but not near a computer right now.

Thanks when I get home I will try to decompress and see what I find... If the lag gets fixed I will def reflash
Sent from my LG-E980 using xda premium

smaybe said:
good job !
but so frustrating to see all these new roms and F240 users waiting in vain for a cool one for our phone
but i will try it like all others roms looks great, the biggest bug for my phone is external sdcard not recognized
EDIT: this look like the best rom over here !!
Click to expand...
Click to collapse
Is this working on your F240L without need of flashing modem separately???

cynosure4sure said:
Is this working on your F240L without need of flashing modem separately???
Click to expand...
Click to collapse
None of these builds flash a modem, so you can flash whatever you want for your device.
Sent from my LG-E980 using Tapatalk 2

Great to see this ROM here hope work can continue on it to get it stable. To those who haven't used it before it's kinda like CM and Slim rolled into one with some bonus customization, and the original developer continues to add things all the time. Thank You Kaymmm much appreciated!!!

cynosure4sure said:
Is this working on your F240L without need of flashing modem separately???
Click to expand...
Click to collapse
have you tried it on F240L?
can u share the results and experience?

Is this for E980 or E988 or both?

smjunaid said:
have you tried it on F240L?
can u share the results and experience?
Click to expand...
Click to collapse
I tried it and pretty everything are working but not tested that much

eseregin said:
Is this for E980 or E988 or both?
Click to expand...
Click to collapse
I built it for the E980, not sure if it will work on E988 or not...if you're running other CM-based roms on your phone, this should work too.

Getting some lag and it freezes for about 10 sec while texting ...also phone has been rebooting on it own ..and it force closes android tuner but that's no biggie. I will say though it really smooth,fast and .. customization is amazing. Just the messaging and rare reboot issue is the only problem i have ran into....I'm gonna stick with the ROM and keep testing it out
Sent from my LG-E980 using xda premium

Great Rom so far. I've noticed as mentioned previously, some MAJOR lag spikes. Not just in texting, but in other applications as well. Also the occasional Gapps force closes. Which i've wiped the delvik, permissions, everything i could think of. On the current Gapps as well. Great rom minus those.

Is camera and BT working on this rom?

drumbeater79 said:
Is camera and BT working on this rom?
Click to expand...
Click to collapse
Camera is working. I don't have a BT device to test with, but there were some BT updates to CM, which this ROM depends on, so I wouldn't count on it.
Given the known stability issues in the current build, I would suggest sticking to another ROM until I can get another build together (will be running one tonight).

kaymmm said:
Camera is working. I don't have a BT device to test with, but there were some BT updates to CM, which this ROM depends on, so I wouldn't count on it.
Given the known stability issues in the current build, I would suggest sticking to another ROM until I can get another build together (will be running one tonight).
Click to expand...
Click to collapse
Thanks Dev, you've always been responsive

[ROM][N7105XXUEML3 4.3][V2.0][12/27] STAINLESS - Best International ROM

This is N7105XXUEML3 Android 4.3 for the i317 Variants (except Verizon/Sprint) .
This ROM is pure international stock N7105 for the i317 and i317M.
So if you are a purist when it comes to ROMs or simply want a ROM that just works then this ROM is for you.
This is a great ROM to use as a base for modding or as a daily driver.
Stability, performance and battery life are my main objectives.
If you want to use all of part of this ROM to build your own ROM, credit is all I ask.
Special thanks to pvsgh and cnote74 for testing this ROM.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
I no longer own this device so I am not 100% sure this will flash correctly or it will even boot up. Please make a backup of your current ROM and report back your findings.
PRE-REQUISITES
Before flashing this ROM for the first time, please first flash stock 4.3 using ODIN, then flash TWRP via ODIN too. This will solve WIFI issues.
It's also recommended to flash the Devil Kernel from here right after flashing the ROM.
Features:
Based on N7105XXUEML3
Deodexed, Rooted and Zipaligned
Busybox
init.d support
Custom boot animation support
Tethering: USB, WIFI, Bluetooth
De-Knoxed
Stock Kernel
What doesn't work:
You tell me
What works:
Everything
Change Log
Version 2.0
Base N7105XXUEML3
On first boot please download the latest SuperSU from Google play and update the su binary.
Screen Shots
DOWNLOADS
USE TRWP OR CWM TO FLASH THE ROM OR THE CSC FILE
Remember to make a backup of your current ROM before you flash this one.
ROM N7105XXUEML3 V2.0
DOWNLOAD -- md5: e476fed474836ab41abfaba44b5be42c (Also included in the zip file)
==================================================================================
If you like my work buy me a beer!
==================================================================================

will report problem shortly

AT&T has still not released their update to 4.3. I flashed this one in the meantime and am very pleasantly suprized. With Devil Kernal, this stock ROM is more reliable and out performs custom ROMs (4.3 and above) that I have tried. Imiss some of my fancy gadgets, like pocket mode and kill app, but Ilove the stability and power that this ROM provides. It easily OCs to 1800 cpu and GPU scales up to 800mhz easily (not too many ROMs have been ably to do that). However, testing shows no benifit to scaling GPU over 666mhz, and scaling above 544mhz gives only moderate benifit. I am still experimenting with CPU voltage. It has been my experience that Devil Kernal is way over clocked for most ROMs. Every phone is different, so proceed cautiously and back up often when messing with cpu voltage. My UV = -75 globaly so far, 1705 and 1800 uv = -125; stable as a bull I had to use trickster Mod to access voltage. Devil app does not let me into voltage.
Thank you for your work. Samsumg got this ROM right. It definately raises the bar.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

not working on T889
have to Devil2 kernel to get WiFi done

Yes use devil kernel for wifi even at&t needs devil kernel for wifi.
Sent from my GT-N7105 using XDA Premium 4 mobile app

Great job miscom. Do you have plans to include features from note 3 at some point?

WTF...Download now...thanks dev...
Enviado desde mi SAMSUNG-SGH-I317 usando Tapatalk 4

Its cool
couple of problems. the wifi does not turn on.
the status bar says h not lte
very laggy even after the cache wipe

Yoshiikim said:
couple of problems. the wifi does not turn on.
the status bar says h not lte
very laggy even after the cache wipe
Click to expand...
Click to collapse
First, why say that wifi is not working AGAIN when it was stated two posts above??? Wifi does work out of the gate with stock kernel included in ROM if you flash bootloader via ODIN in Skynote OP. Wifi is working great for me. Second, you have to let the ROM settle for a little bit before saying something is "laggy". It is running phenomenally for me and feels like the most stable 4.3 TW ROM I have flashed yet.

Hoper Mega Very Fast ....This rom ...thanks Dev. ..:thumbup:
Enviado desde mi GT-N7105 usando Tapatalk 4

mataflakitas said:
Hoper Mega Very Fast ....This rom ...thanks Dev. ..:thumbup:
Enviado desde mi GT-N7105 usando Tapatalk 4
Click to expand...
Click to collapse
I think we have to flash stock 4.3 (I317 or I317m depending on variant) to have 4.3 bootloader and have wifi working, will try that and report

Hi OP, I have a query , How do you know your rom is "The best international ROM"? Has it been tested against others in a trial? Just wondering where this type of allegation comes from?
Thanks,

Great rom but lost root after flash. Any way to root rom?

thanks miscom, this is the one I have been waiting for!

ssmr2t said:
Hi OP, I have a query , How do you know your rom is "The best international ROM"? Has it been tested against others in a trial? Just wondering where this type of allegation comes from?
Thanks,
Click to expand...
Click to collapse
Seriously? He had the best previous factory stock, and if he can do it before, I am sure this is no better. Once you are great ROM cook, you are always a great cook.
Sent from my GT-N7105 using Tapatalk

ssmr2t said:
Hi OP, I have a query , How do you know your rom is "The best international ROM"? Has it been tested against others in a trial? Just wondering where this type of allegation comes from?
Thanks,
Click to expand...
Click to collapse
Why would it be an allegation? An allegation is accusing someone of something bad, whether it is true or not is secondary with an allegation.
You mean alleged.

voyagerair said:
not working on T889
have to Devil2 kernel to get WiFi done
Click to expand...
Click to collapse
cnote74 said:
Yes use devil kernel for wifi even at&t needs devil kernel for wifi.
Click to expand...
Click to collapse
I don't have a working Note 2 anymore; mine broke and I decided to spend the money on the Note 3. That said I will continue supporting this device for as long as we get updates from Samsung. I asked for testers and I got great help from them. So if you are interested in testing this ROM just send me a PM and I will add you to the list.
Thank you for the tip on the devil kernel. I will look into it to see if I can include it as an option during installation.
aaplus12 said:
Great job miscom. Do you have plans to include features from note 3 at some point?
Click to expand...
Click to collapse
It will be slow coming, but I will. At this point because of the many changes in 4.3 I want to first get it stable before I start adding features.
Yoshiikim said:
couple of problems. the wifi does not turn on.
the status bar says h not lte
very laggy even after the cache wipe
Click to expand...
Click to collapse
Have you tried the devil kernel mentioned a few post ago? After a new flash the device may need anywhere from 5 to 10 minutes to settle down.
TD4 said:
I think we have to flash stock 4.3 (I317 or I317m depending on variant) to have 4.3 bootloader and have wifi working, will try that and report
Click to expand...
Click to collapse
That's a good idea. Please let us know how it goes.
AqueousBor said:
Great rom but lost root after flash. Any way to root rom?
Click to expand...
Click to collapse
That's a known issue with 4.3. You can get the root files from here and flash from recovery after flashing the ROM. The original thread is here
That said, I already have those components being flash at the end of the flashing process. The only thing you need to do on first boot is to go to the play store and update the SuperSu apk and then run to app to update the su binary.

I'm having issues with some apps that require root + writing on to the system. I'm wondering if it's a KNOX related thing because SE for android status is currently enforcing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mypantsaretorn said:
I'm having issues with some apps that require root + writing on to the system. I'm wondering if it's a KNOX related thing because SE for android status is currently enforcing.
Click to expand...
Click to collapse
The KNOX files have been removed from this ROM. Did you update the SuperSU app and the su binary on first boot? If not you can get the root files from here and flash from recovery. The original thread is here
And the Stock kernel is in Enforcing mode. You would have to flash a custom kernel with Permissive mode enabled by default.

Android 4.3 and required bootloader
I have updated the OP with instructions on how to update the bootloader for the i317/i317M devices to avoid some issues with WIFI and other parts of Android. Flash at your own risk.

[ROM][4.4.2][OFFICIAL] LiquidSmooth v3.0 Beta - Hlte

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[url="https://github.com/LiquidSmooth/android_kernel_samsung_hlte"]Kernel Source[/URL]
Code:
[url="http://www.drdevs.com/devs/teamliquid/Nightly/"]ROM Download[/URL]
[url="http://forum.xda-developers.com/showthread.php?t=2397942"]Pa Gapps Download Thread[/URL]
Please Support Liquid by Donating HERE​
XDA:DevDB Information
LiquidSmooth, a ROM for the T-Mobile Samsung Galaxy Note 3
Contributors
deadman96385
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: hltetmo
Based On: AOSP, CyanogenMod, Paranoid Android, Slim Roms,
Version Information
Status: Testing
Current Beta Version: 3.0 beta
Beta Release Date: 2013-12-29
Created 2013-12-30
Last Updated 2014-02-11

Bug list will be updated soon

deadman96385 said:
This is a untested build still waiting for my tester to report back.
Flash at your own risk, its not my fault if you brick your phone.
Bugs that i expect it will have:
Click to expand...
Click to collapse
deadman96385 said:
This is a untested build still waiting for my tester to report back.You must use CWM to flash (needs confirmation)
Click to expand...
Click to collapse
Installs fine on twrp 2.6.3 (no errors), but it hangs at Samsung Note 3 screen for a while. Then eventually boots. It gets stuck at boot animation. I tried it once with Gapps and once without. CWM seems necessary.
deadman96385 said:
Phone can not hang up call (needs confirmation)
3g drops randomly (needs confirmation)
WiFi disconnects randomly (needs confirmation)
Click to expand...
Click to collapse
I am so happy to try this. I will let you know how it goes. I can test everything except the wifi. I love your roms!

First official android ROM! Nice! Glad to see LiquidSmooth on the Note 3! :good:

Won't flash this but I will be using this later on. Thanks for the official support.
Sent from my SM-N900T using XDA Premium 4 mobile app

I can't express the amount of love I have for you right now, will donate when stable and I get my check
Sent from my SM-N900T using Tapatalk

Well my tester got back to me and it doesn't boot so i have uploaded a older build that does boot, but has a little bit more bugs. for now that will do until i can fix the audio-caf errors i am getting.
If anyone would be willing to help that would be wonderful, we track are own audio-caf for a strict-aliasing fix, and merge in cm's changes the errors i am getting are these:
hltetmo: http://pastebin.com/AwDkTvYT
hltespr http://pastebin.com/iFR9mygR
repo is located here: https://github.com/LiquidSmooth/android_hardware_qcom_audio-caf

Looks like cm team committed some updates wonder what they fixed
Sent from my SM-N900T using xda app-developers app

Need cm to flash where do I get the clockmod to flash this
Sent from my SM-N900T using XDA Premium 4 mobile app

Oh boy !
i am so happy to see this ROM !!
I will flash as soon as i have a chance !!
And have the same question as @jpeps , where do i get CWM ? is there a thread for it yet ? if so, havent seen it...

I see the thread here and also in the 9005 forum.. For Canadians which would be better to flash?
Sent from my SM-N900W8 using Tapatalk

Tested today, flashed through CWM x2. First time with GAPPS and second w/o. The first time I was constantly getting dropped signals, sending SMS worked fine and WiFi also dropped continuously. The second time I was experiencing the same but it was happening less often.

Twrp works guys just make sure you have the newest one
Sent from my SM-N900T using Tapatalk

I second the TWRP post above. I have 2.6.3.8 and it installed fine for me. First boot took alittle while at the Samsung screen but after the first boot, boot times were rather fast. SMS, data, audio (albeit low volume), work fine. No calling (which we all know doesn't work), random reboots when changing settings from time to time. All options work great (i.e. Halo, Dark settings, Navbar, Themes, etc.). I installed PA Google apps and all seems to work fine. Will keep checking other things and post more as I run across them. Great work and thanks again for all the hard work and dedication. I'm sure I am speaking for many when I say it's nice to see this much progress for our N3..:good:

I'm confused...Do I flash the beta in the op or the one in the link a few posts down?

nickster1 said:
I'm confused...Do I flash the beta in the op or the one in the link a few posts down?
Click to expand...
Click to collapse
You can try both, but the one in the comments can boot successfully, the beta is a hit or miss. Don't take my word for it though, I'm not flashing until it's a tad more stable .
Sent from my SM-N900T using XDA Premium 4 mobile app

nickster1 said:
I'm confused...Do I flash the beta in the op or the one in the link a few posts down?
Click to expand...
Click to collapse
I flashed the beta in the OP. As far as I know they are one in the same. It takes you to a directory where there are three versions (Sprint, T-Mobile and the 9005 I think). Should be 3.0 beta from the 28th last I checked..

jpeps said:
Need cm to flash where do I get the clockmod to flash this
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2454079

I have to just say Wow! Super impressed with how well this rom works. I cannot believe how fast it is. Obviously it's not ready to be a daily driver & I didn't notice any bugs that haven't been reported. Keep up the good work guys & thank you very much for sharing this.

I flashed this on my Canadian SM-N900W8 Galaxy Note 3 and it looks to be working well!
Bugs :
- No camera
- No Calling
- 5 Signal bars are always empty
- Battery Charging Animation weird or make Sys.UI crash
- First Boot incredibly long (Might not be an issue though, but it is longer than Stock with Touchwiz)
- Status Bar in launcher is not well sized and is not transparent. (Same for bottom)
Otherwise it is INCREDIBLY FAST! Touchwiz to hell!
I am going to flash Touchwiz again because I need calling, but as soon as it gets fixed, I will be right back!

[ROM] [5.1] Samsung Galaxy S3 [d2att] [d2cri] [Nightly] LiquidSmooth Lollipop

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
cameron581
cdub50
Cl3Kener
CPA-Poke
deadman96385
iiD4x
itsmikeramsay
Jarrid42
johnnyslt
jsnweitzel
liquid0624
mtb300gt
Ntemis
reginald476
rkpeterson
rwaempires
sandtod
Somber73
sspencer10ls
TheBr0ken
timpohladthomas
Code:
DPI Changer
Status Bar Settings
I'll update more features later on
Code:
[url="https://plus.google.com/b/102153960718796996774/communities/117452480298315341829/stream/d5e8c0fe-5ee7-44df-97a5-6dd8cdcf8bb8"]Check are Google+ for a updates[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[url="https://github.com/deadman96385/Deathly_Kernel_D2"]Kernel Source[/URL]
Code:
[url="http://drdevs.com/devs/teamliquid/Nightly/S3_att/"]D2 ATT Nightly Download[/URL]
[url="http://drdevs.com/devs/teamliquid/Nightly/S3_Cri/"]D2 CRI Nightly Download[/URL]
[url="http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842"]Gapps Download[/URL]
CLICK HERE TO SHOW LIQUIDSMOOTH SOME LOVE ​

This is a beta build for the Samsung S3 (D2att)
Bugs:
None so far
Click to expand...
Click to collapse
Samsung S3 (D2att) specific bugs:
First boot takes a while just be patient
Signal takes a bit to turn on but does work
Click to expand...
Click to collapse
Install Instructions:
First time installing LiquidSmooth to your Samsung S3 (D2att), or coming from another ROM:
- Make sure you're running latest Recovery
- Copy GApps zip and Liquid ZIP to your internal SDCard
- Boot into Recovery
- Flash Liquid zip from internal SDCard
- Flash GApps zip from internal SDCard
- Reboot
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Click to expand...
Click to collapse

The link is for Verizon, but the thread says at&t... Am I missing the correct link?

JohnnyB1970 said:
The link is for Verizon, but the thread says at&t... Am I missing the correct link?
Click to expand...
Click to collapse
fixing links as we speak, we are using template for setting up threads
it should be good now.

Very nice! Flashed on top of slim lp....all looks good and all my apps working well.
As with other lp ROMs using open camera. Also with all lp ROMs I can't DL with stock browser..... Use chrome to DL.
Edit.,...stock camera seems to take pics OK.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app

Is this build different than mtb3000gt's build?
Sent from my SAMSUNG-SGH-I747 using Xparent Cyan Tapatalk 2

manfromgta said:
Is this build different than mtb3000gt's build?
Sent from my SAMSUNG-SGH-I747 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Nope. ferinxus is now an official maintainer he works with me and mtb3000gt??
Sent from my SM-P600

2015-01-31 ROM is up.
Main change is the kernel, we are now officially including BMS kernel in our d2 builds.
gapps package linked in this thread is Banks L Minimal, so be careful when you formerly used another one from 201411xx, please wipe cache before flashing ROM to avoid issues when switching gapps packages. Or just clean flash them.
EDIT:
oh, word of caution, we forgot to dial down the cpu clock in BMS kernel, so your phones will run 1.8GHz after flashing this ROM. Please go to Performance settings and dial it down to stock 1512MHz or whatever you prefer and check the box Apply on boot.
EDIT2:
Performance Settings Apply on Boot option doesn't seem to work yet, but you can use app like No-Frills CPU Control or Infamous Performance to achieve the same goal.

Also, anybody still experiencing inconsistent baseband issues on d2att at this point, please try updating your modem/radio firmware to later one:
http://forum.xda-developers.com/showthread.php?t=1831898

Downloading this today!!
I know this is under development, and I'm not going to be using this as a daily driver - I won't even have a SIM in this phone, I just want to keep up on the android side of things. I've recently flashed the 10-27 and the 12-1 builds of 5.0 for d2att, and I'm noticing some LS features that I have loved in the past are not (yet) part of this LP LS ROM. Things like customizing status bar colors, adding battery bar, lockscreen customizations....etc. These are still being developed, yes? (NOT asking for eta, just hoping those are planned inclusions)
Even what is in there is stable (except camera, and that was already a known issue), Thanks for all your work on this ROM LS team!!
EDIT: Tried a dirty flash over LS 20141201 build, just stays on Boot animation. Reflashing clean with additional kernel flash as recommended....
---------- Post added at 10:59 AM ---------- Previous post was at 10:42 AM ----------
tallsilver said:
...with all lp ROMs I can't DL with stock browser.....
Click to expand...
Click to collapse
I used the stock browser on LS 4.0 Lollipop from 12-1-2014 to download this just now and it worked... I had to long-press the link and choose "open" for it to work, but it's downloaded... Flashing now...

cannothas said:
Downloading this today!!
I know this is under development, and I'm not going to be using this as a daily driver - I won't even have a SIM in this phone, I just want to keep up on the android side of things. I've recently flashed the 10-27 and the 12-1 builds of 5.0 for d2att, and I'm noticing some LS features that I have loved in the past are not (yet) part of this LP LS ROM. Things like customizing status bar colors, adding battery bar, lockscreen customizations....etc. These are still being developed, yes? (NOT asking for eta, just hoping those are planned inclusions)
Even what is in there is stable (except camera, and that was already a known issue), Thanks for all your work on this ROM LS team!!
---------- Post added at 10:59 AM ---------- Previous post was at 10:42 AM ----------
I used the stock browser on LS 4.0 Lollipop from 12-1-2014 to download this just now and it worked... I had to long-press the link and choose "open" for it to work, but it's downloaded... Flashing now...
Click to expand...
Click to collapse
Yes, all LS features are in plans to get added later, for now it is still beta and except camera is pretty much fully functional ROM with some LS features already in there.
Mind that if flashing latest nightly, I advise you also reflash the kernel from zip package after ROM+gapps. Reason is that inline BMS kernel we used now has no limiter defined and will max out CPU OC to 1.8GHz on boot
BMS in zip package has the script to limit that to stock 1512MHz.
Bms zip package:
https://plus.google.com/107118581623654161493/posts/ikHGi9VLUmM
Baseband on d2att should work without trouble, been working fine since December 1st first actually ...

Looking good so far
tallsilver said:
Very nice! Flashed on top of slim lp....all looks good and all my apps working well.
As with other lp ROMs using open camera. Also with all lp ROMs I can't DL with stock browser..... Use chrome to DL.
Edit.,...stock camera seems to take pics OK.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
OK, just for information, if it helps: after clean flash of 20150131, recommended Gapps, and the BMS kernel, I don't have any luck with stock camera, open camera will not do video (but I have not tested all settings, only default settings) and is altogether super buggy - like if I go into the menu, enable/disable something, and return to the camera it will tell me that the camera is currently in use, sometimes FC and sometimes reboot.
Aside from camera, I have found no issues thus far, but I'll keep playing with it as I have time. But I cannothas (see what I did there!) test cell or data, I have no sim card for this.
Sweet!!:highfive:
EDIT: Holy Massive battery drain, batman!! Installing better battery stats to see what it might be. I did not experience this on 20141201
EDIT2: I disabled wifi, connected to BT internet tether (bluetooth works), and now the wifi is buggy to get enabled again. At length the toggle finally enabled wifi, but not on the first try.

[ROM] [5.0] Samsung Galaxy S3 [d2att] [d2cri] [Nightly] LiquidSmooth Lollipop
OK, not sure if this is ROM related, kernel or gapps (or a bad flash) but I attempted to add my gmail calendar, but syncing the calendar is not an option under accounts. It's just missing... I'm still playing to see what's up...
EDIT: installing Google calendar linked up the default calendar as well. Am I right in suspecting Gapps?
Sent from my SAMSUNG-SGH-I747

New TEST build.
Dear d2can users running I747M family phone models. I prepared a test build which now has d2can added to ASSERT line, so this d2att ROM could be normally installed on any d2can phone. If you want to test out if it works correctly then download this ROM:
https://www.androidfilehost.com/?fid=95916177934523303
Kernel CPU limiter to 1512MHz stock default is now in place.

cannothas said:
OK, just for information, if it helps: after clean flash of 20150131, recommended Gapps, and the BMS kernel, I don't have any luck with stock camera, open camera will not do video (but I have not tested all settings, only default settings) and is altogether super buggy - like if I go into the menu, enable/disable something, and return to the camera it will tell me that the camera is currently in use, sometimes FC and sometimes reboot.
Aside from camera, I have found no issues thus far, but I'll keep playing with it as I have time. But I cannothas (see what I did there!) test cell or data, I have no sim card for this.
Sweet!!:highfive:
EDIT: Holy Massive battery drain, batman!! Installing better battery stats to see what it might be. I did not experience this on 20141201
EDIT2: I disabled wifi, connected to BT internet tether (bluetooth works), and now the wifi is buggy to get enabled again. At length the toggle finally enabled wifi, but not on the first try.
Click to expand...
Click to collapse
In these builds the stock camera does not work. What I do for a work around for now is the following
Advanced wipe (dalvik cache - system - data - internal storage - cache )
Flash Rom - Reboot
Let it set for 10 minutes - Reboot
Flash Gaps / Kernel - Reboot
Upon reboot download "Titanium backup" you will need premium
Freeze the stock camera - Then download "Open Camera" and use open camera
For Video it has been confirmed that VivaVideo works.
I did this process because I opened the stock camera already and clearing the cache did not work.

tdude said:
In these builds the stock camera does not work. What I do for a work around for now is the following
Advanced wipe (dalvik cache - system - data - internal storage - cache )
Flash Rom - Reboot
Let it set for 10 minutes - Reboot
Flash Gaps / Kernel - Reboot
Upon reboot download "Titanium backup" you will need premium
Freeze the stock camera - Then download "Open Camera" and use open camera
For Video it has been confirmed that VivaVideo works.
I did this process because I opened the stock camera already and clearing the cache did not work.
Click to expand...
Click to collapse
You can just disable the Camera (stock app) under Settings/Apps/All .. that's what I do. I use Open Camera for pics (just don't use touch to focus/zoom and it's ok), missing video doesn't bother me much for now and it looks like a bit of hassle to get it working.

fenixus said:
You can just disable the Camera (stock app) under Settings/Apps/All .. that's what I do. I use Open Camera for pics (just don't use touch to focus/zoom and it's ok), missing video doesn't bother me much for now and it looks like a bit of hassle to get it working.
Click to expand...
Click to collapse
You are correct you can do it that way. I did it that way at first and had the same focus/zoom issue but seemed that freezing it with titanium I am able to zoom/focus which is nice since I use camscanner to scan/email.
Of course I might just be lucky.. doesn't happen often haha!

tdude said:
You are correct you can do it that way. I did it that way at first and had the same focus/zoom issue but seemed that freezing it with titanium I am able to zoom/focus which is nice since I use camscanner to scan/email.
Of course I might just be lucky.. doesn't happen often haha!
Click to expand...
Click to collapse
So you can zoom/focus and "touch screen" on OpenCamera without freezing application ?
How do you do that ? By Titanium ?

We decided that since we have now 2 branches to choose from with Liquid Smooth Lollipop, then for now, starting tomorrow, we will be providing builds for both branches, one with Themes, other with Layers.
There will be changes in download locations, you will see 2 subfolders in under d2att and d2cri links, one called Liquid Themes, other Liquid Layers. Pick yours.
I will get it updated tomorrow.

Not too shabby on the battery life. Keep in mind I have no SIM, but WiFi and BT were on almost the entire time. Basic setup, no email or Google services really running at all.
Sent from my SAMSUNG-SGH-I747

[rom][g800f] aokp mm [unofficial]

Code:
***WARNING***
-READ CAREFULLY!!
YOU FLASH THIS ROM AT YOUR OWN RISK.I TAKE NO RESPONSIBILITY FOR ANY DAMAGE THAT MAY OCCUR DUE TO THE FLASHING OF THIS ROM.
I WILL NOT BE RESPONSIBLE FOR LOST DATA,BRICKED PHONE,OR ANYTHING OF THE SUCH.(PHONE EXPLODES,OVERHEATS ETC)
THIS ROM IS ONLY FOR THE S5 MINI SM-G8OOF (Exynos) DO NOT FLASH THIS ON ANY OTHER DEVICE!
Quote:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOKP MM for the G800F. I've used it for a short time and it seems to be petty nice.Sadly,at this point it is lacking some features like "ribbon" and "toggles"
There is ROM control however which is nice.I believe that there are plans to add more features in the near future (I could be wrong though) I will keep an eye out and if any major new features are released I will update this accordingly.
http://aokp.co
I highly recommend a full backup before flashing this ROM.Again,I am not responsible if you lose any or all of your data!
Installation
-Download the zip file
-Copy to your phone
-Reboot into recovery mode (Volume-Up + Home + Power button)
-Wipe Dalvik/art Cache, Cache, System and Data (inside Wipe -> Advanced Wipe)
-Install AOKP
-Install GAPPS
-Reboot
Click to expand...
Click to collapse
Known Issues
Code:
mGerrit app seems to force close most of the time.
Report any other issues and maybe I can fix them.Who knows.
Download
https://www.androidfilehost.com/?fid=24591000424940765
ENJOY!
Thanks
Team Kang and the the CM team
@hennymcc and @CTXz for their work that allows others the opportunity to build new ROMS for our device.
@zaworka for helping me discover why I couldn't get this ROM to boot.
XDA:DevDB Information
[ROM][G800F] AOKP MM [UNOFFICIAL], ROM for the Samsung Galaxy S5 Mini
Contributors
spookcity138
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2016-06-18
Last Updated 2016-06-18

Hello, this ROM is also compatible with the version SM-800M and 800Y?
Thank you!

pickmod said:
Hello, this ROM is also compatible with the version SM-800M and 800Y?
Thank you!
Click to expand...
Click to collapse
I believe so,but am not 100% positive as I'm not really sure of the difference.CM13 for theG800F is also for the M and Y.That's why I'd think it has to be compatible.
Please search a little before you flash this though.I'm not responsible for the outcome if you choose not to.
Sent from my SM-G800F using Tapatalk

Good job!
G800F ROM works fine. I have only two problems: with MMS (the same as in every other CM13 based ROM). I can't also turn on USB OTG.

kubans23 said:
Good job!
G800F ROM works fine. I have only two problems: with MMS (the same as in every other CM13 based ROM). I can't also turn on USB OTG.
Click to expand...
Click to collapse
Yeah,if there's a MMS problem in CM13 it will def be present in this ROM as well.I never really use it so I don't known.
I have no issues switching USB-OTG modes however.
Sent from my SM-G800F using Tapatalk

I give up. Can you please tell me how to turn on usb otg?

kubans23 said:
I give up. Can you please tell me how to turn on usb otg?
Click to expand...
Click to collapse
Advanced settings.Click on USB-OTG mode.You'll be presented with 3 options.There is a description for each.Choose the appropriate one.
Sent from my SM-G800F using Tapatalk

Camera
hello, i have problem with camera. sometimes, when i close camera app and open again. camera drop and a i must restart phone. please repair it.

Nitrixcz said:
hello, i have problem with camera. sometimes, when i close camera app and open again. camera drop and a i must restart phone. please repair it.
Click to expand...
Click to collapse
This is a known problem with our device.It's out of my skill set to fix it at this point.Gonna have to wait til I learn lots more or someone more knowledgeable fixes it [emoji1]
There are work-arounds however.Media server killer app from the play store seems to be one.
Have a look at the CM13 thread for other ideas.
Sent from my SM-G800F using Tapatalk

I updated my kernel build to work with this ROM. If interested
http://forum.xda-developers.com/showthread.php?p=67030323
Sent from my SM-G800F using Tapatalk

Another big THANKS to spookcity for making this ROM work on our device.
I am using it for two weeks now and it is good for a daily use.
But I am a well below average user who does not use the most popular apps.
The battery life is very very good. And there has not been a single issue to report.
I just don't get what spookcity means with "lacking some features like ribbon and toggles".
I thought I knew what these things are but I could be wrong.
For me there is nothing missing on AOKP compared to other ROMs.
As I am going throug the alphabet and have been to C, B and now A next one will be OctOS (I guess).

Pat750 said:
Another big THANKS to spookcity for making this ROM work on our device.
I am using it for two weeks now and it is good for a daily use.
But I am a well below average user who does not use the most popular apps.
The battery life is very very good. And there has not been a single issue to report.
I just don't get what spookcity means with "lacking some features like ribbon and toggles".
I thought I knew what these things are but I could be wrong.
For me there is nothing missing on AOKP compared to other ROMs.
As I am going throug the alphabet and have been to C, B and now A next one will be OctOS (I guess).
Click to expand...
Click to collapse
Glad to hear it's working out!
What I'm referring to with " toggles" and "ribbons" are a couple of AOKP features that were present in previous versions (lollipop etc)
They may be part of the MM version now as well. I'm not sure.
Sent from my SM-G800F using Tapatalk

So after testing another ROM for a week I went back to AOKP. At the moment this would be the ROM of my choice.
It is running so smooth, completely bug free and it feels somehow...solid. I only use a different camera app to avoid the known issues with all our ROMs.
There are many customization options and they are accessible in a good way. I really like the layout of that.
The ROM starts very quickly (measured whith an assisting app) and also shuts down in an acceptable time.
Unfortunately after flashing SuperSU the shutdown time is a bit long now. SuperSU integrates well into the settings menu...which I haven't noticed first and flashed it a second time.
Many thanks to spookcity for making AOKP work on our device.

Hi all! Is there a setting for re mapping of the physical buttons on the ROM? And is aosp or cm based?

Mrdream94 said:
Hi all! Is there a setting for re mapping of the physical buttons on the ROM? And is aosp or cm based?
Click to expand...
Click to collapse
I believe this MM version is based on CM. No idea about HW button remapping as I haven't used this ROM in awhile. Hopefully someone else can help.
If not there are certainly apps or an xposed module for HW button remapping.
Sent from my SM-G800F using Tapatalk

Mrdream94 said:
Hi all! Is there a setting for re mapping of the physical buttons on the ROM? And is aosp or cm based?
Click to expand...
Click to collapse
Yes there is a setting for re mapping the buttons. I am using a different ROM at the moment but it was onboard.
I have to use it for TitaniumBackup where the options are not shown on the screen, so I set the hardware-menu-button on double-press to open options.

Pat750 said:
Yes there is a setting for re mapping the buttons. I am using a different ROM at the moment but it was onboard.
I have to use it for TitaniumBackup where the options are not shown on the screen, so I set the hardware-menu-button on double-press to open options.
Click to expand...
Click to collapse
Same here Bro ahahah however thanks for answer