This is not the same rom as "Vanir" in Orig Development, becuase it's GEE based and there are the newest nightly builds, the Vanir from Orig Development is Gproj based and the last build is 4.4.2 from December 2013 - outdated and without significant featuresFirstly, all below is not my work... I just wanted to share it, because on my e975 it works like a charm
it has full of less or more tweak and features like:
- Halo, Hover, Heads Up
- Floating Mode
- Active Display
- Peek
- etc...
Here is the original thread.
http://forum.xda-developers.com/showthread.php?t=2601475
Download link:
http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/gee/
I recommend Franco kernel (from faust93 thread), it's batter efficient.
But if you like check these kernels... (MiRaGe, AK and mart1x)
https://drive.google.com/folderview?id=0B9EFp1W1O3f2SFVaNGg4SzVHelk&usp=sharing
If you use any of these kernels i suggest flashing this too (after flashing you have to install "Synapse" from Google Play):
https://drive.google.com/folderview?id=0B77BTW0zStYCU0VOa3FHY2NNTjQ&usp=sharing&tid=0B77BTW0zStYCSTRIYWpZQS1nOWs
This (with Synapse app) lets you control many different hotplug version like Autohotplug, Autosmp or MSM Hotplug (I'm almost sure that Trickster Mod can't do that), also it has a lot of options to tweak your kernel.
You can also check out these drivers for better performance ( for me i think the march adreno drivers are the fastest +100 to 3d in antutu)
https://drive.google.com/folderview?id=0B77BTW0zStYCU0VOa3FHY2NNTjQ&usp=sharing&tid=0B77BTW0zStYCSTRIYWpZQS1nOWs
Just let me know which combination of kernel and drivers are working the best (the most in performance)
Enjoy
Pretty sure there's already a thread for Vanir Gee in original android development, be careful your post may be removed. Anyway, did you get the camera working properly without stretching and stuff?
itsdacj said:
Pretty sure there's already a thread for Vanir Gee in original android development, be careful your post may be removed. Anyway, did you get the camera working properly without stretching and stuff?
Click to expand...
Click to collapse
Yes, there is Vanir in original android development, but it's 4.3 (stable) and 4.4.2 nighlty build from Dec 2013 - so it's outdated.
Furthermore, it's made from Gproj sources. This one is for Gee and it has daily updates/nightlies (last from 2nd Sep).
About camera there are three little bugs:
- when you turn on HDR, the camera preview is a bit stretched (but the photo is made as it should, i mean, it has bigger fov than preview).
- the camera app starts a little bit slow, you have to wait about 2 seconds.
Probably you mean aspect ratio problem (the preview is a bit vertically stretched) ? This camera doesn't have true view (true aspect ratio mode). When you change image size to 6MP , there is no problem.
If you want to have 4:3 preview (in 13MP) you have to flash PA rom, make a TB backup of camera app, then flash Vanir, and delete Vanir camera app (otherwise the PA cam won't replace the Vanir one), then restore PA cam, (don't reboot till restore or you can have some problems with cam).
It was working on Gproj roms, i haven't tried it on Gee roms, but probably you'll need Gee based PA. Hope it helps.
Just discovered that faust93 has released an experimental kernel which fixes camera bugs on gee roms if you're interested
itsdacj said:
Just discovered that faust93 has released an experimental kernel which fixes camera bugs on gee roms if you're interested
Click to expand...
Click to collapse
Yes, I'm interested... (you mean using stock kk kernel camera drivers or sth?) maybe i could contact with vanir devs to impelemt it into their nightlies. Is it a zip, or some kind of terminal typing (like in volume keys trick)?
banangrg said:
Yes, I'm interested... (you mean using stock kk kernel camera drivers or sth?) maybe i could contact with vanir devs to impelemt it into their nightlies. Is it a zip, or some kind of terminal typing (like in volume keys trick)?
Click to expand...
Click to collapse
He has used stock kk kernel drivers yes, he has an experimental kernel out that works but to implement it into an existing kernel you need to patch it which i dont know how to do. Awesome news though!
itsdacj said:
He has used stock kk kernel drivers yes, he has an experimental kernel out that works but to implement it into an existing kernel you need to patch it which i dont know how to do. Awesome news though!
Click to expand...
Click to collapse
About the camera,i didn't see any problems with camera (maybe you have other camera hw module) , can you record your screen?
edit: patching doesn't seem too hard, there's a program which does it if you have patch source, but if someone doesn't know C well this can be really hard
BTW
I don't even know how too anyway, i'm often dissatisfied of kernels (always there's a lack of sth), so maybe i'll try to build my own (sounds crazy).
I'm thinking about modifying franco kernel (such a great work, but no cpu & gpu oc and gpu uv) for aosp, or sth for gproj (f93 is great but no oc, solid has oc but in the end f93 has less slowdowns in games and it has faux123's hotplug & thermal).
It fixes camera stretch, improves the quality and photosphere and pano work in Google Camera. Building a kernel sounds fun
itsdacj said:
It fixes camera stretch, improves the quality and photosphere and pano work in Google Camera. Building a kernel sounds fun
Click to expand...
Click to collapse
Downloadin the exp version of franco, did you noticed any bugs except vk and 13mp problem?
Vk? 13mp camera bug is ROM dependent. On dirty unicorns the official camera is 8mp but every other camera app on Google play is 13mp. Battery life is men but it might be DU. Trying vanir tonight.
itsdacj said:
Vk? 13mp camera bug is ROM dependent. On dirty unicorns the official camera is 8mp but every other camera app on Google play is 13mp. Battery life is men but it might be DU. Trying vanir tonight.
Click to expand...
Click to collapse
VK i mean volume keys bug, when i was using DU with AK-xGenesis kernel, battery life was poor (maybe to much app wakelocks). In my opininion CM11 (with f93 gproj kernel) and "the rom posted above " (with franco ) has very good battery life.
banangrg said:
VK i mean volume keys bug, when i was using DU with AK-xGenesis kernel, battery life was poor (maybe to much app wakelocks). In my opininion CM11 (with f93 gproj kernel) and "the rom posted above " (with franco ) has very good battery life.
Click to expand...
Click to collapse
I think its different ROMs. In Vanir the volume key bug is present, in DU its the same. In PA and TEMASEK it is not. Where did you say faust's volume key trick was?
EDIT: Found it but don't think it's compatible with Vanir.
itsdacj said:
I think its different ROMs. In Vanir the volume key bug is present, in DU its the same. In PA and TEMASEK it is not. Where did you say faust's volume key trick was?
EDIT: Found it but don't think it's compatible with Vanir.
Click to expand...
Click to collapse
Temasek? You mean unofficial cm? Btw, maybe it will work, just try, i noticed the volume key bug is kernel related too (it seems the VK bug is a relic from original nexus 4 version) (on Sprint OG Franco Kernel there no inverted keys ,check it out -> http://d-h.st/3kM ). Btw Vanir is mainly CM based (i've seen it somewhere but i don't remember where)
Some offtopic:
I'm not sure, but the performance is rom relative too? Some builds are slower, some faster (even if both are 4.4 roms).
I wonder why the 4.4 builds are slower than 4.3 ones. Vanir 4.3 was really ultra lighting fast, never seen such a fast rom, some roms with oc gpu & cpu were not as fast a Vanir 4.3 with f93 [email protected] stock cpu & gpu freq. What is that magical , maybe gpu driver (tried some kk adreno drivers, but there were no big effect).
Look, i've migrated from vanir 4.3 to cm11 m8 (then m9), on both roms i was using f93 kernel with the same settings, but the difference in Antutu 5.0 is about 2-3k ( on 3d test vanir works much more fluid), in games 4.3 works better too.
Hmmm... If 4.3 kernel can work without any problems on 4.4 (i mean f93 gproj), so maybe a jb 4.3 driver could be work (with some modifications) on 4.4. Probably you already know what I'm lookin for, i want as great performance as on Vanir 4.3 and ART runtime (or shortly the most power)
(It had a rom thread, but it looks more like a disscussion, LOL)
banangrg said:
Temasek? You mean unofficial cm? Btw, maybe it will work, just try, i noticed the volume key bug is kernel related too (it seems the VK bug is a relic from original nexus 4 version) (on Sprint OG Franco Kernel there no inverted keys ,check it out -> http://d-h.st/3kM ). Btw Vanir is mainly CM based (i've seen it somewhere but i don't remember where)
Some offtopic:
I'm not sure, but the performance is rom relative too? Some builds are slower, some faster (even if both are 4.4 roms).
I wonder why the 4.4 builds are slower than 4.3 ones. Vanir 4.3 was really ultra lighting fast, never seen such a fast rom, some roms with oc gpu & cpu were not as fast a Vanir 4.3 with f93 [email protected] stock cpu & gpu freq. What is that magical , maybe gpu driver (tried some kk adreno drivers, but there were no big effect).
Look, i've migrated from vanir 4.3 to cm11 m8 (then m9), on both roms i was using f93 kernel with the same settings, but the difference in Antutu 5.0 is about 2-3k ( on 3d test vanir works much more fluid), in games 4.3 works better too.
Hmmm... If 4.3 kernel can work without any problems on 4.4 (i mean f93 gproj), so maybe a jb 4.3 driver could be work (with some modifications) on 4.4. Probably you already know what I'm lookin for, i want as great performance as on Vanir 4.3 and ART runtime (or shortly the most power)
(It had a rom thread, but it looks more like a disscussion, LOL)
Click to expand...
Click to collapse
Sorry I've been busy with school but sounds good. So you aren't on a gee ROM anymore? I'm on PA gee and the volume keys bug is present but I'm working round it. By TEMASEK I mean faust93's unofficial CM yes.
itsdacj said:
Sorry I've been busy with school but sounds good. So you aren't on a gee ROM anymore? I'm on PA gee and the volume keys bug is present but I'm working round it. By TEMASEK I mean faust93's unofficial CM yes.
Click to expand...
Click to collapse
Yep, just as you, i still changing rom... Vanir 4.4.4 is packed of features and pretty stable... but for the performance is the most important, gee kernels are too weak for me (or maybe it's a rom issue). I'll try the TEMASEK
banangrg said:
Yep, just as you, i still changing rom... Vanir 4.4.4 is packed of features and pretty stable... but for the performance is the most important, gee kernels are too weak for me (or maybe it's a rom issue). I'll try the TEMASEK
Click to expand...
Click to collapse
OK cool [emoji1]
Gapps for this rom? Tx :laugh:
Edit: ok found, the same
Check this everyone
http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/gee/
Flash rom 15012015 no boot...bootloop bootlogo
zed923 said:
Flash rom 15012015 no boot...bootloop bootlogo
Click to expand...
Click to collapse
remember build 15-01 is a Lollipop ROm. If you're using Jolla kernel ( gee/geeb/stock ) version, please:
- Before flash, format boot.img and format system in Advanced setting at Recovery
- Make sure your bootloader is updated to lastest Lollipop version ( mako )
- The best way to flash Lollipop Rom if you have a problem like bootloop or freezing is try to KDZ and return to stock, root and install recovery again.
Related
Unofficial-Official JellyBean for P930/935/936
Unofficial-Official JellyBean for P930/935/936 - N2 - with working WiFi. Just clean ROM like original from SU640.
Download: (Need minimum 630mb free size on System part )
http://dfiles.ru/files/w4gujg5ef
For information:
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
I unpack KDZ from SU640, and repack System part.
Deleted all Operator Apps and Google Apps, remove SecurityCheck, adapt ROM for GSM, and now size of ROM ~ 630mb. And we can flash it via CWM without problem on old partition table and it working with old MODEM.
I ported new kernel 3.4 from LG F120S and SU640, adaptive it for P930.
My port Sphinx V4.1 - 4.1.2 JB for P930
Probably fix copability with different bootloaders;
Rework battery and charger drivers;
Translated to RUS/UKR
Need 646mb. free space on System part!
Download:
http://dfiles.ru/files/1er0nv65u
First patch for Sphinx ROM
Fix some bugs in sound driver;
Fix proximity sensor;
Some fixes for telephony.
Download: Global_Patch_1.zip
Second patch for Sphinx ROM
Fix random boots during sleep;
Added 2 new LG apps: PhotoAlbum widget + Photo wallpaper;
Restore EasySettings.
Download: Global_Patch_2.zip
Bugs:
Blue screen of death on Widows PC (try different mode connections); - turn-off "USB-debug"
Big thanks All authors who made Sphinx ROM!
Link available!
Awesome, awesome work. Can't wait to have official 4.1.2 on the P930!
miroslav_mm said:
Unofficial-Official JellyBean for P930/935/936
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
Click to expand...
Click to collapse
Will this introduce any problems if switching between the already existing ICS, CMx ROMs other than needing the corresponding gapps lite from there on out?
I would be interested in your 3.4 kernel. Do you have the source on github?
I also be interested in his 3.4 kernel
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
miroslav_mm said:
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
Click to expand...
Click to collapse
Thanks for your work!
I have flashed this rom on my ATT P930，but Phone has been restarted and cant get into system.
so I restore to 20E.
Looking forward to your 3.4 kernel too!
navik said:
Thanks for your work!
Phone has been restarted and cant get into system.
so I restore to 20E.
Click to expand...
Click to collapse
Did you wipe your Phone via recovery? Its working without any problem.
miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Yeah no problems here. But I did install through CWM and not ROM manager. Out of habit I install new ROMs through CWM due to issues I have had with installing new ROMs through ROM manager.
Sent from my LG-P930 using xda app-developers app
miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Sure，I used recovery 5.82 and had wiped data ，wipe cache and wipe dalvik cache.
Thanks for reply and your work.
I will try again！
Sent from my LG-SU640 using xda premium
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
EDIT: Got the answer here for those interested: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
Btw, great work.
just1nsama said:
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
Click to expand...
Click to collapse
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
miroslav_mm said:
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
Click to expand...
Click to collapse
Alight thanks ... i found more specifics here: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
I see you created the repo on your github, but as of now it is empty, will you be adding the content in the near future ? Would really like to compile a PAC build with it and try it out
Thanks and keep up the good work :good:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
tdmcode said:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
Click to expand...
Click to collapse
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
miroslav_mm said:
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
Click to expand...
Click to collapse
CM took the lu6200 ICS sources and added display stuff from caf.
The original lge ICS ota was unstable for all iproj devices.
I have a weak p930 that will be the judge of the new 3.4 kernel. It reboots about every 5 to 15 minutes under the ics kernel. I will try when I get sources... No sources, no install...
Can't wait to flash this once WiFi is working
I don't have unlimited data and use WiFi a lot.
Flashed this ROM. It looks very good except WIFI issue. Am now testing battery drain. Looking for WiFi fix.
I've been checking this thread every
Hour for a WiFi fix... I use this as a WiFi only device so the lackthereof is a killer right now for me... That being said if anyone has a lead on what's breaking it I would love to help find a fix for the problem. Really never thought we would see a jb release for our device from LG but I believe it will be a major stepping stone for future development of our P93x's. Once again I wanna thank miroslav and all the other great devs and tinkerers who bust their asses to make our phones into beasts, and I look forward to seeing what awesomeness will come with these recent leaks.
Sent from my LG-P930 using xda app-developers app
sory if i post in wrong place.
my problem?
i use a lot wi-fi......
I try vanir aosp rom (based on cyanogenmod) and i have AMAZING wi-fi everyware.....
but i dont want a "havy" rom like this one.
I like Iridescent_Zed_III odexed(or not odexed),but there is a weak wi-fi.I try difrends basebands,other kernel,still weak.....
Vanir aosp is using baseband 77, Iridescent_Zed_III is usin 77 too.
What makes the difrent?kernel?
any idea?
isolove said:
sory if i post in wrong place.
my problem?
i use a lot wi-fi......
I try vanir aosp rom (based on cyanogenmod) and i have AMAZING wi-fi everyware.....
but i dont want a "havy" rom like this one.
I like Iridescent_Zed_III odexed(or not odexed),but there is a weak wi-fi.I try difrends basebands,other kernel,still weak.....
Vanir aosp is using baseband 77, Iridescent_Zed_III is usin 77 too.
What makes the difrent?kernel?
any idea?
Click to expand...
Click to collapse
to keep it short:
baseband has nothing to do with ROM. (you have to flash it manually, never changes on ROM flash. the 77 one is the last from stock rom )
now difrences between vanir aosp & Iridescent_Zed_III:
vanir aosp:
- its latest android KK 4.4.2 running on 3.4 kernel (new & powerful, but not as stable as stock.)
Iridescent_Zed_III:
-its BASED on android ICS 4.0.4 running on 2.x.xx kernel (dont know exact) its based on latest firmware we've got official from SONY. its the stablest one, when you will. but its laggy & old.
there are many things affecting the wifi (drivers inside rom, kernel, baseband, ''tweaks'' inside, even router's play a role, etc....) so its hard to say what exactly will make it better / worse. you will have to test it yourself to say if its better or not.
my advice: you say vanir had the better wifi, but its to ''heavy'' (even i dunno what u mean exactly..) so i would recommend to give Legacy Xperia ROM a shot. i think you will get the most out of it. also if you dont need to have the latest android (just want USE your phone) then use android 4.2.2 JB (CM10.1) its the bets mix of power & still very usable. in addition its keep very clean & lightweight.
LINK to thread: http://forum.xda-developers.com/showthread.php?t=2147958
good luck
Thank you for your time.
I testet 11 first...
Laggy,and what about video recording,5 seconts to start.........
Hi everyone,
I've changed the focus of this thread to collect all the info and help about installing the geeb version of SlimKat on our E975.
After having SlimKat by @fusionjack on my I9100 as a daily driver and seen its smoothness and stability, I've found the geeb version of the latest SlimKat and would like to have it on our E975.
Feel free to post all that can help to make it work on our Optimus G
Thanks in advance to all that will give an hand
UPDATE
After a full wipe, all went good!
Currently running SlimKat on E975 without problems with @gearslam Ak-xGenesis Slimport-MOD kernel
Just follow the usual steps if you are coming from another rom, like me:
- Wipe data/factory reset
- Wipe /cache
- Wipe /system
- Flash SlimKAT build
- Flash gapps package of your choice
- Optional: flash adreno update package
- Flash kernel
- Optional, but with my E975 I always do this at the end: flash SuperSU zip
- Reboot
All done!
All the sources for those too lazy to search XD
- SlimKAT builds: www.slimroms.net or @arcardinal thread HERE
- Gapps package, I prefer the micro modular one: HERE
- @gearslam kernel, the one tested, but other gee kernels may do the work anyway: HERE
- Adreno drivers april update: HERE
I think that's alla for now
Thanks to all the respective creators of kernels, rom and so on
Would also love an official SlimKat build for e975. A few devs gave it a go but couldn't fix multiple errors. The good news is that all you need to do is flash franco mod kernel after flashing geeb SlimKat
http://forum.xda-developers.com/showthread.php?t=2701843
It works really well, i have not experienced any bugs
Sent from my LG Optimus G using XDA Premium 4 mobile app
m4dbra1n said:
Hi everyone,
I'm a newcomer here in the E975 section, as I've floated around the I9100 for some months
Since I really like @fusionjack unofficial SaberMod SlimKat, I'd like to build one for the E975.
I've found a geeb build HERE and I would like to know if it's possible, starting from that, to port that to our E975, or if a simple gee kernel is enough.
I'm a newbie in building roms from scratch, and for that I'm googlin' a lot while BBQLinux iso is downloading
Any help, hint or advice is really appreciated
Thanks in advance for now
Click to expand...
Click to collapse
geeb is a cdma version of og... so after flashing the geeb rom u need to flash a gee kernel so that uget signal and data... it dont need port or anything else..u can flash any geeb rom and compatible gee kernel to get it work....what happens if you flash only geeb rom without kernel.........???? nothing happens it flashes and you would be able to boot the rom and everything will be working except fot mobile signals...if you are licky enough you may have signals also ... lol
So the steps are:
- flash geeb SlimKat rom
- flash gapps package
- flash mod kernel (franco or similar, but they must be MOD version right?)
- reboot
One last question: will the camera be recognized as a 8 mpx or will I find all my 13 mpx? XD
Thanks guys
m4dbra1n said:
So the steps are:
- flash geeb SlimKat rom
- flash gapps package
- flash mod kernel (franco or similar, but they must be MOD version right?)
- reboot
One last question: will the camera be recognized as a 8 mpx or will I find all my 13 mpx? XD
Thanks guys
Click to expand...
Click to collapse
IF YOU FLSH GEEB KERNEL U GET 8MP CAM .. IF U FLASH GEE KERNEL U GET 13MP CAM.. :good:
OK, tried the latest geeb SlimKat weekly with the slim gapps package and 2 MOD kernels, FrancoMOD and AK-Genesis by @gearslam, but at the reboot have had only fc's.
All I've wiped are /cache, /dalvik and /system, not data, to not lost all the apps installed.
Will try with a complete wipe and let you know asap
nchc said:
...It works really well, i have not experienced any bugs...
Click to expand...
Click to collapse
What about the camera?
On any rom based on AOSP, including SlimKat, the camera can not focus on objects that are further away 20 cm from the phone.
Generally speaking i touch to focus no matter what rom, even stock. Slim camera focus is much better than 20cm. I use several camera apps too, again irrespective of rom. Just backup current rom, give slim a whirl, if you dont like it just reinstall backup
Sent from my LG Optimus G using XDA Premium 4 mobile app
Is it true that slimkat has the best battery life between 4.4 roms?
dreamkill3r said:
Is it true that slimkat has the best battery life between 4.4 roms?
Click to expand...
Click to collapse
Back to the I9100 days, I can say from my experience that the SaberMod version by @fusionjack was the best rom regarding stability, smoothness and battery
For that reason I was so happy to see that a geeb version exists, and would like to try it even on my E975
I thought i just learned that geeb was for The e970 and gee/geehrc was for The e975 sprint and international version?
Sendt fra min LG-E975 med Tapatalk
Hi everyone, using the slimkat from some weeks, all OK.
The only thing is: random touch not responding at all sometime. I have to reboot to make it work again.
Do I have to set some settings with trickstermod since I've tried ak-xgenesis and ported Francomod kernel?
@nchc and others can you give some hints?
Thanks in advance ?
I never had any issues with slim. I just got bored and eventually went back to stock. I was on an earlier build and most likely earlier kernel too . When i get home ill c what kernel i had, perhaps you could flash that to see if it improves touch issues. Have you updated to latest weekly and moded kernel?
Sent from my LG-E975 using XDA Premium 4 mobile app
Well I'm on latest weekly 5.4 with Francomod r206, since there's no update from then for the kernel, and the issue seems to be gone for now. Maybe I was having some problems due to gearslam ak-xgenesis ported kernels?
Thanks for now
An update just to let you know that weekly 5.8 is working good with francomod kernel ? 4.4.3 is working good 'til now ?
I would like to try slim on my international e975. Which modded kernel should I download? GEE or GEEB? Can anyone please let me know??
Those for gee and with MOD in the name: francomod4gee for example ?
Another update just to say that even with gearslam's ak ported kernels it works like a charm
Im wondering right now what is the most stable KitKat ROM for the Desire Z? I know it cant be stable AND no lag so lets just go with stable....Right now, I have a 4.2.2 ROM that is OK but sometimes it reboots ALL day and suddenly stops and is stable (and no lag).
Which 4.2.2 rom do you have?
For now, nothing on KK is better than the AlterNdromadus 4.2.2
Kéno40 said:
Which 4.2.2 rom do you have?
For now, nothing on KK is better than the AlterNdromadus 4.2.2
Click to expand...
Click to collapse
Its guhl's permissions ROM.
I am not looking for a 4.2.2 ROM. I asked for a 4.4.x ROM.
Thank you for your reply but that is not what I am asking
so try purekat, it's not stable but for me the most stable
riahc3 said:
Its guhl's permissions ROM.
I am not looking for a 4.2.2 ROM. I asked for a 4.4.x ROM.
Thank you for your reply but that is not what I am asking
Click to expand...
Click to collapse
To be clear, I wanted to tell you that KK Roms are far away from being as stable as this 4.2.2 rom.
So, I went back on 4.2.2.
The only thing that are better on KK : the clock, dialer and contact apps (aesthetically)
I'm waiting for PureKat beta3 (after Marco's exams !).
Kéno40 said:
To be clear, I wanted to tell you that KK Roms are far away from being as stable as this 4.2.2 rom.
So, I went back on 4.2.2.
The only thing that are better on KK : the clock, dialer and contact apps (aesthetically)
I'm waiting for PureKat beta3 (after Marco's exams !).
Click to expand...
Click to collapse
To be clear, I wanted to ask what KK ROM is the most stable.
So, I never mentioned anything about 4.2.2.
Besides, AlterNdromadus 4.2.2 being a CM ROM, is problably slow as hell compared to AOSP....
riahc3 said:
Besides, AlterNdromadus 4.2.2 being a CM ROM, is problably slow as hell compared to AOSP....
Click to expand...
Click to collapse
It is not IMO.
I just gave you my feed-back. You're free to test it by yourself. I will be happy if you find a KK Roms which deserve to stay on it on our device...
riahc3 said:
To be clear, I wanted to ask what KK ROM is the most stable.
So, I never mentioned anything about 4.2.2.
Besides, AlterNdromadus 4.2.2 being a CM ROM, is problably slow as hell compared to AOSP....
Click to expand...
Click to collapse
No, your preconceptions are incorrect. Firstly, CM is based on AOSP and does not diverge away enough (ala MIUI) to ruin performance. Secondly, CM is actually better performing because with CM we have more up to date libs etc. especially for qcom stuff like libhardware. Due to there never being AOSP support for this device and HTC stopping official support at 2.3, then clearly CM stuff is gonna work better for our device. Why do you think the Andromadus team stopped AOSP 4.2.2 after beta8?
Now the one case where AOSP is faster (for me) is Fyodor's 4.2.2 ROM, because he put in the effort to get all the libhardware stuff and qcom display stuff working nicely.
If you don't believe me then sync the latest Andromadus AOSP 4.2.2 source (as of around the end of 2012 I think), build it, and tell me you prefer it to their most recent CM build.
Kéno40 said:
It is not IMO.
I just gave you my feed-back. You're free to test it by yourself. I will be happy if you find a KK Roms which deserve to stay on it on our device...
Click to expand...
Click to collapse
This is true, and the only advice I can give also. Besides, there are only 2 KitKat ROMs to choose from: Andromadus test builds or Marco's PureKat (CyanKat, AOSB are out of date so won't be stable).
I might like to add that this thread is against the rules anyway so you should be grateful it hasn't been reported yet and accept the advice you've recieved (which has been good).
Essentially, for stability go with 4.2.2, for most stable KitKat it will take you a total of 2 whole flashes to find out which one you prefer.
HTCDreamOn said:
No, your preconceptions are incorrect. Firstly, CM is based on AOSP and does not diverge away enough (ala MIUI) to ruin performance.
Click to expand...
Click to collapse
Every 4.2.2 ROM Ive tried that is based on CM vs AOSP is slower. On AOSP you lose some nice features, but Its always seemed slower and more of a memory hogger.
Seems to me that way anyways.
HTCDreamOn said:
Secondly, CM is actually better performing because with CM we have more up to date libs etc. especially for qcom stuff like libhardware. Due to there never being AOSP support for this device and HTC stopping official support at 2.3, then clearly CM stuff is gonna work better for our device. Why do you think the Andromadus team stopped AOSP 4.2.2 after beta8?
Click to expand...
Click to collapse
Newer isnt always better.
Also:
I was thinking of updating this, but I've lost my G2. I can't blind dev and I ran into enough difficulties as it was when I could test it. Java is just too confusing for me right now, so much more confusing than C which I'm only just starting to get comfy with. Unfortunately the lag is just a problem you'll have to get used to, backup and clean flash and wait a while. I couldn't do anything tobhelp you anyway, I just don't know how. I can give you the age ole tips: no task killers, no placebo scripts, minimal apps, minimal gapps, no hangouts, no Facebook, no heavy browsers (opera mini is great) but yeah I'm really sorry but there won't be any updates. As it is I think the ROM works well anyway. I'm no dev so if you want someone to support then turn to Flinny, Marco, NeverGone, etc. It sucks that my goal to have a stable sorta up to date ROam was dashed but that's life. Thanks to the people who liked the ROM anyway
Click to expand...
Click to collapse
1: Java is more confusing than C? Wow....
2: Saying "lag is just a problem youll have to get used to" is a no no. Like I mentioned, the ROM Im currently on is almost lagless but just has the problem of suddenly becoming stupid and rebooting all the time. Other than that, it is great.
3: Saying that the ROM works well anyways when you are mentioning that it lags and also recommending several comprimises like no heavy browsers and no minimal apps is just a no-no. Im sure this ROM had its time and its moment but its been out matched.
I guess Ill stay on this ROM for now and hope that KK development gets better. That or Phonebloks...
Im using a lower end phone these days because of a nonrelated issue and it already has 4.4.2! Im just surprised.
It also works pretty damn good considering the speed and RAM it has.
For me AOSB 1.2.9 is faster but Flinny's alpha3 is most stable because using AOSB it some times gets reboot especially when open es file explorer .quick pic etc.But AOSB consumes a lot of customizations its really good.
hi guys, my friend want me to reset his gnex, i had it long time ago, and for me the best and smoothest rom was stock 4.1.2. i flashed paranoid kitkat rom for him ,but is not as fast or stable as 4.1.2.
i noticed that some lollipop rom are out, but with a lot of bugs. is there any lollipop rom that have no bugs?
leandronb said:
hi guys, my friend want me to reset his gnex, i had it long time ago, and for me the best and smoothest rom was stock 4.1.2. i flashed paranoid kitkat rom for him ,but is not as fast or stable as 4.1.2.
i noticed that some lollipop rom are out, but with a lot of bugs. is there any lollipop rom that have no bugs?
Click to expand...
Click to collapse
All ROMs - both official builds from Google and Custom ROMS from our talented developers here on XDA - have bugs. Just a fact of digital life!
If you want the most stable build available, you're probably best served by Google's official releases. Scroll down for the different GNex versions/links.
If you want Lollipop, check out the Android Development board. Plenty of great developers and ROMs to chose from there. I have a 5.1 ROM linked in my signature below, as well.
AvidPhisherman said:
All ROMs - both official builds from Google and Custom ROMS from our talented developers here on XDA - have bugs. Just a fact of digital life!
If you want the most stable build available, you're probably best served by Google's official releases. Scroll down for the different GNex versions/links.
If you want Lollipop, check out the Android Development board. Plenty of great developers and ROMs to chose from there. I have a 5.1 ROM linked in my signature below, as well.
Click to expand...
Click to collapse
thanks for the answer. i will try this 5.1 rom. Some roms have little bugs, and others like lollipop roms make the device not good for daily driver, like the camera not saving pictures, green lines on video etc. i will try some roms and leave the most stable on his device, but i think i will flash 4.1.2 in the end.
leandronb said:
thanks for the answer. i will try this 5.1 rom. Some roms have little bugs, and others like lollipop roms make the device not good for daily driver, like the camera not saving pictures, green lines on video etc. i will try some roms and leave the most stable on his device, but i think i will flash 4.1.2 in the end.
Click to expand...
Click to collapse
GL
I've tested out many of the newest ROM'S and I'm still not impressed with the overall functionality of them when compared to the 4.1.2 PA ROM I've been running for over 2.5 yrs now.
The following is the files/order I flash in Clockworkmod:
PLEASE, PLEASE, PLEASE BACKUP YOUR CURRENT ROM/FILES TO A PC, JUST IN CASE, CAUSE YOU NEVER KNOW.
4.1.2 PA ROM
http://d-h.st/users/gangsterjoop?fld_id=9654
Gapps
http://d-h.st/la8
4.2 clock/camera/keyboard/gallery
http://d-h.st/Zja
Kernel
https://www.dropbox.com/s/pu9brbuovdhe22h/v3.0.53-ZenSERIES_v10_4.1_Final_Tuna.zip
3rd party apps I use:
Nova launcher prime
Pie Controls Pro
PGM2 aka touchcontrol
Lagfix premium
Easyeyez
Trickstermod
Greenify
Media server killer
Flashplayer 10.3
Adaway
Lollypop 123 keyboard
Exposed extensions-gravitybox, KitKat toast, smooth progress bar.
isajoo said:
GL
I've tested out many of the newest ROM'S and I'm still not impressed with the overall functionality of them when compared to the 4.1.2 PA ROM I've been running for over 2.5 yrs now.
The following is the files/order I flash in Clockworkmod:
PLEASE, PLEASE, PLEASE BACKUP YOUR CURRENT ROM/FILES TO A PC, JUST IN CASE, CAUSE YOU NEVER KNOW.
4.1.2 PA ROM
http://d-h.st/users/gangsterjoop?fld_id=9654
Gapps
http://d-h.st/la8
4.2 clock/camera/keyboard/gallery
http://d-h.st/Zja
Kernel
https://www.dropbox.com/s/pu9brbuovdhe22h/v3.0.53-ZenSERIES_v10_4.1_Final_Tuna.zip
3rd party apps I use:
Nova launcher prime
Pie Controls Pro
PGM2 aka touchcontrol
Lagfix premium
Easyeyez
Trickstermod
Greenify
Media server killer
Flashplayer 10.3
Adaway
Lollypop 123 keyboard
Exposed extensions-gravitybox, KitKat toast, smooth progress bar.
Click to expand...
Click to collapse
Man this device was a pain for me today. after wiping to install 4.1.2 the device disconnected. and the usb connector i think is faulty. i had to flash every bit of rom in fastboot and a lot of errors. so i installed 4.0 rom because system.img was smaller and took a lot of time to copy the 300mb file and finally the device booted. i ota to 4.1.1 and i think i will ota manually to 4.1.2 because on device already appeared 4.2.2 ota. do you think is worth update all the way to 4.3? the device is smooth and i like the camera app better than 4.2 rom with that awful lag to rotate. do you think is better have an updated device or keep it in 4.1.2?
AOSP Lollipop 5.1- a wee better than stock is the best lollipop I could find yet. It is near-stock Android, and the overall performance is very good comparing it to the age of this device. The only bad thing I can say about this device isbthat the battery is draining faster(it might be an issue with my phone). If you are brave enough(such brave, much wow), you can try to overclock to 1.5 and the performance will improve by a lot
Sent from my Galaxy Nexus using XDA Free mobile app