Develop Bugs

[Q] N7100 Colombia 4.3 Update

Hello
So I would like to ask something..
I bought a Galaxy Gear during Holidays but the 4.3 android update hasn't arrived to my carrier yet.. In fact, it is not available in Colombia right now.
so, my question is, if I update using an international official ROM like the United States one or Argentina.. or the one that was leaked, is my warranty void? what happens to the knox flag? will it change to 01? what could happen if I try to install the official 4.3 when it arrives to Colombia?
is it true that if I void KNOX warranty, I would not be able to update to 4.4 or later in the next update? how can i make the galaxy gear fully functional in my phone?
I know they're a lot of questions, but I can't fully understand and I really want to use my Galaxy Gear right now. I have a N7100 model and the 4.1.2. update
Thx

Well i would say you are one lucky guy you still have android 4.1.2 on your phone.
On your firmware you dont have KNOX , once you install 4.3 you have KNOX.
in your place i would read more and find out how to put a custom ROM on your note.
and you could have your Android 4.3/gear watch support without having KNOX.

Galaxy Note 3 rooted android 4.4

Hi, I have a T-Mobile Galaxy note 3 which is rooted, Knox count is showing 1. My question is, can I use the official Android 4.4 to update my phone using odin ? if not, can someone proide an information of how can i update my phone ?
thanks.

I'm going to be flashing a 4.4.2 KK ROM and need to update my bootloader. The link below will update your phone to stock KK and uses ODIN to do so.
http://forum.xda-developers.com/showthread.php?t=2672393

[Q] SM-P607T vs. SM SM-P605 FW Compatability

Hi,
I just got the T-Mobile SM-P607T a couple of days ago. It came pre-loaded with KK.
Android Version: 4.4.2
Baseband Version: P607TUVUANE2
If you search the Sammie site for compatible firmwares, it feeds back the following:
Model Country/Carrier Date Version PDA CSC Kies
SM-P607T USA (T-Mobile) 2014 May 4.4.2 P607TUVUANE2 P607TTMBANE2
SM-P607T USA (T-Mobile) 2014 May 4.4.2 P607TUVUANDA P607TTMBANDA
Nothing else. No older FW's for this device are reflected / found.
I was wondering if anyone might know what (if any) functional differences there are between the 607T and the 605.
Reason: I am considering trying to downgrade this Tab to Official Sammie Jellybean (in hopes of not tripping Knox) so that I can try to Root (again, attempting to preserve Knox 0x0). Would the P605 be a viable solution?
Once on JB, I would likely attempt the method I used to inject root during the 4.4.2 upgrade on my Note-3 which PRESERVED Knox 0x0.
Thoughts?

If you have a new KK bootloader then you can't downgrade the firmware to JB... It will just sit on the Samsung logo getting hotter and hotter...

ultramag69 said:
If you have a new KK bootloader then you can't downgrade the firmware to JB... It will just sit on the Samsung logo getting hotter and hotter...
Click to expand...
Click to collapse
Thanks, UltraMag.
This question driving this post is now moot, with GeoHot's recently released Root which worked quite nicely.
http://forum.xda-developers.com/showthread.php?t=2783922

[Q] Downgrade i9195

Hi I am from Portugal and this is my first post.
I upgraded my mini s4 for 4.4.2 but the battery life is bad, so I wanted to get back to stock 4.2.2. is it possible to downgrade?
Already tried the downgrade I download the 4.2.2 TCL SamMobile put the phone in odin mode and it appears the error and then the mobile phone to say to connect to kies to repair software. so flashing a new recovery and back to normal but with the same 4.4
sorry for my english.:crying:

rmiguel320 said:
Hi I am from Portugal and this is my first post.
I upgraded my mini s4 for 4.4.2 but the battery life is bad, so I wanted to get back to stock 4.2.2. is it possible to downgrade?
Already tried the downgrade I download the 4.2.2 TCL SamMobile put the phone in odin mode and it appears the error and then the mobile phone to say to connect to kies to repair software. so flashing a new recovery and back to normal but with the same 4.4
sorry for my english.:crying:
Click to expand...
Click to collapse
I think it is not possible to downgrade, because of the Knox bootloader, but wait for an expert answer.
Não sou expert na matéria!

rmiguel320 said:
Hi I am from Portugal and this is my first post.
I upgraded my mini s4 for 4.4.2 but the battery life is bad, so I wanted to get back to stock 4.2.2. is it possible to downgrade?
Already tried the downgrade I download the 4.2.2 TCL SamMobile put the phone in odin mode and it appears the error and then the mobile phone to say to connect to kies to repair software. so flashing a new recovery and back to normal but with the same 4.4
sorry for my english.:crying:
Click to expand...
Click to collapse
Ask Him
catelusii said:
Bad experience with KK 4.4.2 brasil
First, wi-fi not working. after 3 fw reinstall with odin and routed, everythink ok, but, I see battery dropping like crazy.
I decide to downgrade from TWRP ... I install 4.2.2 ML1 by Ladyslav.... all thinks OK, but the modem not changed... modem from KK.
I try to reinstall ML1 Modem with odin, and I loose my IMEI/modem not found ( and kernel error or locked ... not shure )
got to service and now it is ok with KK .... battery drop like crazzy ( I`m afraid to downgrade again
Click to expand...
Click to collapse

Hey...I downgraded from germany KK NE6 to Brazil UBUBNE2. I think brazil UBUBNE2 has knox 2.0. I need an expert to confirm this, if you have a look at download mode on any kk firmware you will find this on the second last line :: BOOTLOADER RP SWREV : 2
That is the same revision of knox bl on ububne2 brazil JB firmware. I downgraded from GER NE6 to BRAZIL UBUBNE2 and I confirm this works.
GOOD LUCK.
IMPORTANT :: I need experts and senior users to please have a look at what I mentioned above. Thanks.

sasank360 said:
Hey...I downgraded from germany KK NE6 to Brazil UBUBNE2. I think brazil UBUBNE2 has knox 2.0. I need an expert to confirm this, if you have a look at download mode on any kk firmware you will find this on the second last line :: BOOTLOADER RP SWREV : 2
That is the same revision of knox bl on ububne2 brazil JB firmware. I downgraded from GER NE6 to BRAZIL UBUBNE2 and I confirm this works.
GOOD LUCK.
IMPORTANT :: I need experts and senior users to please have a look at what I mentioned above. Thanks.
Click to expand...
Click to collapse
Hi why you downgrade from NE6 to UBUBNE2 ? Battery ?
I guess that I9195XXUCNE6 will take only 24hours of battery life anf about Max 3:30 hours on display time.
Any tests ?

@heget
back then when i flashed kk firmwares the modem did not upgrade...it remained on ububne2. as a result of this i faced hell of a lot issues....i thought it was something wrong with the rom...later i realised the modem was at fault..then flashed it and it worked...right now i am on xxucnf7 deodexed stock kitkat...its superb..very good battery life..check out the "post battery results" thread in general section..u will find my report there..
here it is
forum.xda-developers.com/showpost.php?p=54454891&postcount=40

YES 100% working ............i installed Brazilian firmware on my galaxy s4 mini my all issue + battery drain issue resolved try......everyone should try which have these type issues with this KITKAT is completely useless .....BEst of luck to all
http://www.sammobile.com/firmwares/download/30561/I9195UBUBNE2_I9195ZTOBNE2_ZTO/

How to upgrade SM-T805 4.4.2 to 6.0.1 with existing root and knox 0X0 ?

Hi @ all,
I need a little help to upgrade my SM-T805 from 4.4.2 to 6.0.1 (T805XXU1CPH5).
I had rooted my SM-T805 in the past with this [GUIDE] How to root without tripping knox - Kitkat and Lollipop, Locked bootloader
Now my question is - It is possible to upgrade to 6.0.1 with keeping root an knox at 0x0?
And when it is possible i need some hints.
My first idea was to download the firmware and flash it with Flashfire but I do not know if this is the right way and whether there are certain things to consider.
Thanks in advance
Cookie
P.S.: Sry 4 my bad english, I'm a german guy

I think you cannot. since mm need new bootloader. and kingroot no longer working.