Related
hi every body
yesterday i was checking out program ROM MANAGER and i found option install rom . so i did it but after phone restarting . at it stucked at frist black screen and there is no any response or move ... then i entered into AMOR_na recovery to reinstall another rom ... i surrprise that i cann't mount SD card ... and now i can't plug my desire to pc to install anoher rom and and my cell phone cann't see my memory card ... please help what can i do ... urgent
thanks for all
odda said:
hi every body
yesterday i was checking out program ROM MANAGER and i found option install rom . so i did it but after phone restarting . at it stucked at frist black screen and there is no any response or move ... then i entered into AMOR_na recovery to reinstall another rom ... i surrprise that i cann't mount SD card ... and now i can't plug my desire to pc to install anoher rom and and my cell phone cann't see my memory card ... please help what can i do ... urgent
thanks for all
Click to expand...
Click to collapse
Enable the SD Card functionality: Boot your phone in FASTBOOT mode (back + power), and enter this command: 'fastboot oem enableqxdm 0' . This will re-enable your SD card.
thank you for reply
but sory for asking how to enter this command from phone or form pc ... and which tool to do that from pc .... i am just beginner
thank you once again
thank you so much ... it is done and solved ..... mant thanks
Please how did you do that? I have the same problem.thanks
You must've Android sdk installed. In and from the tools folder of your sdk open cmd prompt and enter the command as long as you have booted your phone in fastboot by shutting it down and the turn it on by pressing back button + power on
Sent from my Desire HD using XDA App
thank you for helping us
but i have another problem in my HTC desire
i found after installation rom that the (bluetooth )not workig and (usb debubbing ) not working too ( just for charge only no more action )
now my moblie all thing working normaly and i have root ( AMON_RA ) and working too and i can see my memory card but NO BLUETOOTH NO USB
i try to change radio but it is not working and i tried to change rom but it is not working too ... kinldy do u have any soulution .....
thank you so much in advance
does it take long for the charge to start? usb mass storage doesn't work? i think you have usb brick. have a look here. read http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
thank you i will feed you back soon
and please what about Bluetooth
after you try it, let me know. about flashing a radio!? are you s-off. i need to know about rom and radio you have flashed recently.
odda said:
thank you i will feed you back soon
and please what about Bluetooth
Click to expand...
Click to collapse
find my moblie infomation
bravo pvt3 ship s-on
hboot -0.93.0001
microp-051d
touch panel-synt0101
radio-5.11.05.14
my radio 32.49.00.32u_5.11.05.27
kernel 2.6.32.15-gd96f2c0 [email protected]#1
software number w1002 2.2 arabic
this rom installed from ce4arab.com
thank you once again in advance
You should try downgrading to a different radio version first and if the issue still persists, then try flashing a different ROM as your current ROM may have an issue with Bluetooth, which could also explain why it is not functioning for you.
i am downgrading my radio to 32.46.00.32U_5.10.05.17_2 and as the same bluetooth not working and i USB debugging not working too .... and i notice that USB tethering i can't check the box ....
you have to know something i was sufring from could't see my memory card . and i solve it by installing ABD KIt ...
and i notice too it s take long time to start charge ... and if i plug my phone to PC it always searching for Qualcomm CDMA Technologies MSM ?
any advice ?
thank you for support me
odda said:
i am downgrading my radio to 32.46.00.32U_5.10.05.17_2 and as the same bluetooth not working and i USB debugging not working too .... and i notice that USB tethering i can't check the box ....
you have to know something i was sufring from could't see my memory card . and i solve it by installing ABD KIt ...
and i notice too it s take long time to start charge ... and if i plug my phone to PC it always searching for Qualcomm CDMA Technologies MSM ?
any advice ?
thank you for support me
Click to expand...
Click to collapse
I think you may have a driver issue. Disconnect your phone, completely un-install HTC Sync and its associated drivers, restart your PC, re-install HTC Sync, reboot your phone, ensure the 'USB Debugging' option is selected via the phone, and then connect it to your PC after it restarts.
If you have the same bluetooth error, even after changing radio versions, then I would advise you to try either a different working custom ROM that is stable, or even revert back to stock ROM by running your original RUU (use a Gold Card also if necessary), and then check if your Bluetooth is functional. If it is, re-root and install the working custom ROM of your choice.
You have Ian brick. Follow the link I gave you a few posts ago.
Sent from my Desire HD using XDA App
i have one ques.
if i have backuped my last normal rom i was have by rom manager ... and i have it
can i restore it by rom manager and fix all error i have ... ?
i am using AMON_RA recovery
because i am afraid from loseing my cell phone
odda said:
i have one ques.
if i have backuped my last normal rom i was have by rom manager ... and i have it
can i restore it by rom manager and fix all error i have ... ?
i am using AMON_RA recovery
because i am afraid from loseing my cell phone
Click to expand...
Click to collapse
Restoring a Nand will not work. There are different drivers on the PC host, and different firmware controlling USB on the phone. Try the unbricking guide in post#8 and also try what I suggested above.
Let us know how you get on.
thanks for every one helpme in this issue
but i would like to tell you all problems solved by USB-Brick soulution
as you told me before ... i create image from ( r3-tinycore_2.10-desireroot ) on CD and boot my lap from CDrom .. and then do some steps to git CID ... and then i modefied img files and restore ot to my phone and restart and all thing go's well ...
for more details about that i am ready ...
thank you once again
odda said:
thanks for every one helpme in this issue
but i would like to tell you all problems solved by USB-Brick soulution
as you told me before ... i create image from ( r3-tinycore_2.10-desireroot ) on CD and boot my lap from CDrom .. and then do some steps to git CID ... and then i modefied img files and restore ot to my phone and restart and all thing go's well ...
for more details about that i am ready ...
thank you once again
Click to expand...
Click to collapse
Great news, glad you have a properly functional device now
How you did it
odda said:
thanks for every one helpme in this issue
but i would like to tell you all problems solved by USB-Brick soulution
as you told me before ... i create image from ( r3-tinycore_2.10-desireroot ) on CD and boot my lap from CDrom .. and then do some steps to git CID ... and then i modefied img files and restore ot to my phone and restart and all thing go's well ...
for more details about that i am ready ...
thank you once again
Click to expand...
Click to collapse
Please see my problem here:-
http://forum.xda-developers.com/showthread.php?t=923282
It's similar to you. Please guide me to resolve.
Thanks.
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Nipit said:
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Click to expand...
Click to collapse
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
No, I wasn't able to connect to kies. I got a USB cable from original xperia x10, still same issue... Can someone tell me what to do? I downloaded a lot of drivers, but maybe there is some special driver? :/
The problem usually goes away for me when flashing from a freshly booted pc, so try restarting one of your computers for flashing and try again.
Have done that too... Any advice? :/
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
---------------------------------------------
Just after this message, without quit Multiloader:
Phone on DOWNLOAD MODE try this:
Uncheck Boot, unplug USB Cable from Phone and Plug it again, You will see Download actived in Multiloader, Just clic on DOWNLOAD. And your Flashing will be continued....
----------------------------------------------
Sory For my english.
Still the same **** :{{{ Anymore advices guys?
Darkminus said:
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Click to expand...
Click to collapse
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Nipit said:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
Click to expand...
Click to collapse
Same thing happened to me. After this, you shouldn't disconnect you wave, but to wait, and click search port again. If there is no port again, tru with different multiloader (mine was v5.65), and there is again same problem, try with another computer with preinstalled USB drivers.
The good thing is that your phone still enters boot mode. If it wasn't the case, then it would be a total brick.
Best regards
Nipit said:
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Click to expand...
Click to collapse
No, you didn't understand this flashing process. Most important thing here is to avoid interrupting of connection between computer and phone, even in serial port error. You need to search port again, or to change things that I mentioned above.
You hit download, then bootloader is loaded. It is absolutely normal in this algorithym to reset phone (wait reset). Then our error appears in port error. That is the time when you should click port search again, and when it finds it again (it will) click download button. Thats how it was in my case already 4 times.. Hope I helped.
Best regards
I have told that I reinstalled a lot of drivers and tried different PC's, nothing helps. I tried about 3 or 4 versions of multiloader still same result :/ I don't know what to do anymore... Please any advices? Maybe someone had the same issue?
I don't really know what happened. We switched our cables with my friend again, and I tried to flash with Nokia cable. And everything went okay for the 1 time. No errors, no nothing, no Unknown USB device problem. This is really strange. Thank you for you help friends :}
datta.ca said:
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
Click to expand...
Click to collapse
i have bricked my s5330 please help
no download mode or even recoverymode please help
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
[email protected] said:
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
Click to expand...
Click to collapse
Try to install driver manually from windows driver menu
Just installed "S8500-Driver-V5_02_0_0" now it's working since I wanted to flashback my friend's Wave from Bada2 to v1
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED===
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Use fastboot to recover the phone. Check the wiki at the Troubleshooting section.
---------- Post added at 03:31 PM ---------- Previous post was at 03:12 PM ----------
I recommend using drivers latest version. Last time I checked, United Mobile Driver was version 3.7.2 release 4.9.8.1 and Modem Link Driver was 1.0. I'm providing links for download from my personal Dropbox folder because I don't remember from which LG site I downloaded them from.
Vangoda said:
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED===
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Click to expand...
Click to collapse
i had the same problem few days back... (ROM Manager sucks).... ok.. so.. before connecting the phone to the PC.. remove the battery, press both the volume keys (no need to press the power button)... and connect the usb.. now the cell phone will be in emergency mode.. try launching the software with kdz updater now... it should detect it.. after its detected.. connect back the battery (without disconnecting the USb cord ofcourse)... hope this works.. good luck
Good tip, adding to wiki later...
Sent from my LG-P350 using Tapatalk 2
http://multidroid2.feed.nu/2012/03/27/how-to-unbrickflash-your-optimus-melg-p350-2/
Nothing new to what's already posted in the wiki...
response
madmanzrocks said:
i had the same problem few days back... (ROM Manager sucks).... ok.. so.. before connecting the phone to the PC.. remove the battery, press both the volume keys (no need to press the power button)... and connect the usb.. now the cell phone will be in emergency mode.. try launching the software with kdz updater now... it should detect it.. after its detected.. connect back the battery (without disconnecting the USb cord ofcourse)... hope this works.. good luck
Click to expand...
Click to collapse
Didn't I said i did that ? My PC wont recognize my phone in fastboot or emergency mode, with fastboot being stuck at udc_start() and when i connect USB it says "-- suspend --" ,
I tried this guide madmanzrocks still dont see phone.
deleted lg modem, reinstalled all usb hubs, tried 10 versions of LGunited drivers, used both official update tool and kdz nothing works(can't detect phone), and also tried from cmd.
My problem isn't how to unbrick but rather why my pc won't recognize my phone :/
So, no feedback (USB Device connected sound) when conneting the phone? I assume you have tried all ports available.... Long shot, but maybe the phone's USB connector is dead... You have some background on electronics? If so, you can follow the service manual I reposted recently at the General section to check if the connector is gone (p. 113).
dbarrera said:
So, no feedback (USB Device connected sound) when conneting the phone? I assume you have tried all ports available.... Long shot, but maybe the phone's USB connector is dead... You have some background on electronics? If so, you can follow the service manual I reposted recently at the General section to check if the connector is gone (p. 113).
Click to expand...
Click to collapse
yeah tried all ports, I¨ll try on several other pc's. no connection sound, but phone is charging. I have quite some background on electronics so ill check it out when i try this on couple others pc's. Don't want to dissaemble it quite yet and if it rly is dead repair will probably take more money then i spent to buy it(I got it 2nd hand for around 50 $). It happened before that my PC coudn't recognize some devices but never like this. I ussualy get device not recognized, malfuctioned or smthing like that .
Vangoda said:
yeah tried all ports, I¨ll try on several other pc's. no connection sound, but phone is charging. I have quite some background on electronics so ill check it out when i try this on couple others pc's. Don't want to dissaemble it quite yet and if it rly is dead repair will probably take more money then i spent to buy it(I got it 2nd hand for around 50 $). It happened before that my PC coudn't recognize some devices but never like this. I ussualy get device not recognized, malfuctioned or smthing like that .
Click to expand...
Click to collapse
as I mentioned the same problem was solved bu connecting the cell phone with the battery removed. But if even that doesnt works for you, then maybe there is a fault in your PC. Does your PC instantly recognizes USB Pendrives? And which OS are you using?
madmanzrocks said:
as I mentioned the same problem was solved bu connecting the cell phone with the battery removed. But if even that doesnt works for you, then maybe there is a fault in your PC. Does your PC instantly recognizes USB Pendrives? And which OS are you using?
Click to expand...
Click to collapse
I'm using Windows XP Proffesionall, all the other usb devices at least give a message if my PC can't recognize them. You know that yellow box that pops out saying device malfuctioned or smthing like that.
Hey, i have the same problem, and i also can' t fix it, i tried all ways, but my pc dont detect my phone... so i hope that someone will find a way how to fix it... but it' s not normal what is happening with this phone...
Don't know if it helps or you already tried it.
Start fastboot v2 and start the flash so it waiting for device.
Then plug in usb and start phone in fastboot.
That worked for me before.
Sent from my LG-P350 using xda app-developers app
powerdust said:
Don't know if it helps or you already tried it.
Start fastboot v2 and start the flash so it waiting for device.
Then plug in usb and start phone in fastboot.
That worked for me before.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Can you please describe step by step, how to do this? maybe it works...
nr4400 said:
Can you please describe step by step, how to do this? maybe it works...
Click to expand...
Click to collapse
I can try.
First start fastboot v2 on your computer.
Load the recoveryimage amonra or cwm5 (not cwm6)
Start flash so it say searching for device.(or something like that)
Plug in usb in computer.
Start your phone in fastboot.
Plug in usb in phone.
If that don't work you can try to instead of start phone first start it with usb cable.
Can need to unplug usb and plug it in a few times if the device say suspend.
Hope it helps.
Sent from my LG-P350 using xda app-developers app
powerdust said:
I can try.
First start fastboot v2 on your computer.
Load the recoveryimage amonra or cwm5 (not cwm6)
Start flash so it say searching for device.(or something like that)
Plug in usb in computer.
Start your phone in fastboot.
Plug in usb in phone.
If that don't work you can try to instead of start phone first start it with usb cable.
Can need to unplug usb and plug it in a few times if the device say suspend.
Hope it helps.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Can you please add the links to this files or the files? I would be very thanksful...
Up to this point i tried all the methods you guys told me and some i found myself. Nothing worked for me as my PC stil won't recognize my phone, I have also tried all this methods on 4 PCs(2 had windows XP Proffesional SP3 with all the updates, and 2 had Windows 7 SP1 with all the current updates installed(note that 1 version was 32-bit and other was 64-bit).
My conclusion is that the USB connector is DEAD, even thought i can still charge my phone trough it. I probably won't be trying to fix this anymore as I've found an 4th gen iPod and i'll be using that from now on.It is true that i can't make calls(at least not the standard way, you know, it doesn't support SIM cards), but i have my old dumbphone phone for that and this will be used for just about anything else.
So thanks to all of you guys that tried to help me but i fear this is unrepairable. If anyone want's this phone I'll give it to you for free so you can have some fun cracking your head to see what is wrong . I only ask that if you find a way to fix it you post it here and notify me about it(send me pm).Otherwise do whatever you with it.
I have solution
Vangoda said:
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED===
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Click to expand...
Click to collapse
I had the same problem
1.You must have LG P350 drivers
2.Install KDZ updater
3.Download LG P350 software (I recommend V10c)
Now I will explaine steps
1.You have to charge your battery to 100% (Just leavit on charger in fastboot mode)
2.When you connect your phone to PC hit Start,go on devices and printers and disable USB Modem (Win 7)
3.Take your phone,get the battery out,then hold vol+ and vol- at the same time and plug in USB cable
4.Then you should see cheesy color screen(emergency mode)
5.Put the battery in
6.Open KDZ updater,put Type:3GQCT PhoneMode:Emergency
7.Browse downloaded software in your PC (V10C)
8.Hit ,,Launch software update"
Then just wait max.20min and your phone reboots that is it my fried
If triangle apears on screen just get the battery out and put back in
Let me how it went,or for help on [email protected]
need help
Help pls,i have LG P350 running froyo 2.2.2,and i changed software with KDZ updater to V10c but now i cant reboot in recovery,on the screen appears ,,fastboot mode start",i think i lost recovery image but i dont know hov to install it again on froyo 2.2.2
Masimo x said:
Help pls,i have LG P350 running froyo 2.2.2,and i changed software with KDZ updater to V10c but now i cant reboot in recovery,on the screen appears ,,fastboot mode start",i think i lost recovery image but i dont know hov to install it again on froyo 2.2.2
Click to expand...
Click to collapse
Read the wiki... RTFM!
Sent from my MB525 using Tapatalk 2
Did anyone managed to get it working?
I wasted few hours trying to find a solution today but no go (few months ago i had solution but it was for 8, and it's not working anymore), now i only got adb working but fastboot wont detect device. (unknown usb device)
k3lcior said:
Did anyone managed to get it working?
I wasted few hours trying to find a solution today but no go (few months ago i had solution but it was for 8, and it's not working anymore), now i only got adb working but fastboot wont detect device. (unknown usb device)
Click to expand...
Click to collapse
Install htc sync/HTCDriver3.0.0.007.
Cant even install HTCDriver3.0.0.007 on W8.1
k3lcior said:
Cant even install HTCDriver3.0.0.007 on W8.1
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=45415030&postcount=32
Tried it already, this is how i got adb working.
But fastboot is still not working, after entering bootloader the device is not detected at all. (unknown device enumeration failed)
k3lcior said:
Tried it already, this is how i got adb working.
But fastboot is still not working, after entering bootloader the device is not detected at all. (unknown device enumeration failed)
Click to expand...
Click to collapse
Same for me here.
Sent from my HTC Desire
If someone really wants to stick with W8.1 and needs fastboot, i'd recommend dual booting Ubuntu.. dealing with it on Linux isn't easy either but atleast it's doable.
Took me about half hour to get everything running..
Same issue with mine
Sir, i am also having the same issue with my SE Arc S. I am really hoping someone could find a solution to this so I can start doing what i need to do with my phone. Such pain with W8.1 isn't it?
think i got lucky ,fastboot working fine with 8.1 on my desktop,i didnt do or change anything just upgrade from win 7 to 8 then to 8.1
i have htc desire s and i have flashed pacman 23.0.0 in my phone ( jellybean 4.2.2 ) and installed latest htc sync in my pc but whne i connect phone to pc i cant mount usb, the screen on mobile onlys shows loading screen , i have installed htc fastboot driver forcefully by giving it compability of windows 7, before it i was getting "usb not recognized " as error ? help me
If your problem is because Windows 8.1 gives you a driver error that "A request for the USB BOS descriptor failed" SEE FIX HERE.
i rooted my lg g3 d 855 lollipop and tried to install TWRP
but it was not a success i lost recovery + download mode but it boots perfectly into android system and can use it normally
to install twrp again i tried to flash it again and again but no success
then i flash aboot.img and it all went blank not booting not rrecovery etc
i tried board diag method to unbrick it shows up in my system as qcomm hs usb 9008
but when using board diag it says DEVICE NOT FOUND IN DLOAD MODE
plz help this is my first android phone after months of hardwork
i dont think i have enough money to replace the mobo or buy a new one:crying:
Hello,
it's recoverable, but you need to read and some knowledge...
Refer to this thread. Proceed point by point and use willcracker boarddiag.
halekhonza said:
Hello,
it's recoverable, but you need to read and some knowledge...
Refer to this thread. Proceed point by point and use willcracker boarddiag.
Click to expand...
Click to collapse
brother i used board diag method it is succesfully able to show my device as qcomm hs usb 9008
and im able extract the files with program
but when i click start after some time it says ap check failed ,device not found in dload mode
i desperately need ur help IM NEW TO XDA FORUMS I HOPE ANYONE WOULD BE ABLE TO SOLVE PROBLEM
tnx in advanc
adilismail62 said:
brother i used board diag method it is succesfully able to show my device as qcomm hs usb 9008
and im able extract the files with program
but when i click start after some time it says ap check failed ,device not found in dload mode
i desperately need ur help IM NEW TO XDA FORUMS I HOPE ANYONE WOULD BE ABLE TO SOLVE PROBLEM
tnx in advanc
Click to expand...
Click to collapse
I understand. I'm just asking if you really using right boarddiag (thread that I mentioned - willcracker.rar)
Also be sure that you have a phone connected to right port (check it in device manager)
halekhonza said:
I understand. I'm just asking if you really using right boarddiag (thread that I mentioned - willcracker.rar)
Also be sure that you have a phone connected to right port (check it in device manager)
Click to expand...
Click to collapse
halekhonza said:
I understand. I'm just asking if you really using right boarddiag (thread that I mentioned - willcracker.rar)
Also be sure that you have a phone connected to right port (check it in device manager)
Click to expand...
Click to collapse
yes im using the r8 port it shows in device manager and in board daig also i gave port 14
before my phone was going to get bricked its battery was low
is it affecting the procedure i think my battery is not charging
when i remove battery and connect to pc phone shows battery not inserted sign when i insert the batery it disappear and no sign of charging
i thought this might help:good:
You have to use the original LG usb cable. Dont try with fake china cables because its a lot possible to have troubles with them.