Develop Bugs

Desire Bricked?

Hello i wanted to flash MCR3 and forgotten to partition my sdcard so i tried to reflash it but i cant get into recovery mode from Modaco because there stand: device not found but it appears in the connected devixes and if i connect it while i am in recovery mode windows see some strange devices....? Screenshot is attached hope u understand me and somebody can help me!
My Question is what to do now? I can use my ext partition and apps2sd and i can use my sdcard (with htc hero) so what should i do? I have Hboot 0.80 and a device from o2 Germany! Should i apply the original update from o2 with the Blue Build in Recovery? WIll this solve my problem?Or should i only use my garantue and send it back to o2? Or should i stay rooted with mcr r3 and wait until this problem is solved? Or will it never be solved? Many questions no hopes =(

bad news!
welcome to the club
http://android.modaco.com/content/h...sues-with-usb-connectivity-etc-and-root-a2sd/

Dont understand u and this Post ? Sry my english is very bad and i dont understand what is happen? I went to recovery mode before!

try to check if you have the appropriate drivers in your computer.
if you do and you still have the errors then, i am afraid that your device is semi-bricked for the moment. check out the thread i sent on the previous post.

My Desire is Booting but i cant get the sdcard working and i cant get adb working! 1 Hour before it worked...Please explain me what is happen dont understand the thread ! I readet all!

xtcislove said:
My Desire is Booting but i cant get the sdcard working and i cant get adb working! 1 Hour before it worked...Please explain me what is happen dont understand the thread ! I readet all!
Click to expand...
Click to collapse
When you plug your phone in to charge, or into usb on your computer, does it take a few minutes to register, or does it begin charging right away?

socktug said:
When you plug your phone in to charge, or into usb on your computer, does it take a few minutes to register, or does it begin charging right away?
Click to expand...
Click to collapse
So it does nothing! It dont load the battery and it dont recognize that i have connected to the pc. Fastboot is working and i get my SDCard working! No i Connected the the sdcard with my HTC Hero and this is working and i backup all my data! Seems that ext and apps2sd is working!? Wtf.....!?

It sounds like you have the issue that has semi-bricked your phone. You would be best to keep a check on the various threads here and on modaco untill a fix is found.
If you keep it plugged in it will eventually begin to charge, but you have now lost the ability to use usb except for in fastboot.
Good luck.

Fastboot is working!
When i plug in the phone a sound from my pc appears that a device is plugged in.
Its shown as Qualcomm CDMA Technologies MSM and this device has no driver! If i start the phone in fastboot mode it Appears as Android 1.0 device..... Any solution out there? =(

xtcislove said:
Fastboot is working!
When i plug in the phone a sound from my pc appears that a device is plugged in.
Its shown as Qualcomm CDMA Technologies MSM and this device has no driver! If i start the phone in fastboot mode it Appears as Android 1.0 device..... Any solution out there? =(
Click to expand...
Click to collapse
The simple answer is NO. Not yet. Your phone is semi-bricked. Sorry.

Can anyone explain me why its semi-bricked? And what is semi-bricked? I cant understand it because 4 hours ago or so it worked fine.....
Wtf its and Hardware Error!? Woooood my desire dont load directly when its plugged into normal battery laoder..... ;-( ;-(

Your battery will charge, it takes about 4 minutes to start now that the usb is bricked. It will definitely charge.
As for the questions about why it has happened.. No one knows yet. I know your English may not be great, but please read the 3 links below and follow them untill a fix has been found.
http://android.modaco.com/content/h...sues-with-usb-connectivity-etc-and-root-a2sd/
http://forum.xda-developers.com/showthread.php?t=672970
http://forum.xda-developers.com/showthread.php?t=680208
Good luck, and I hope you and all the others can get this fixed.

I can read English very well only the writing is bad

made a mistake using mtty

Whilst reflashing my diamond touch with a new rom at the stage where you disconnect and hold vol down and back button to start the rom off I had the back off and the battery fell out. Now if I do the above it comes up saying no image found then says trigger usb host and red flash saying usb retry enter usb. Have I meesed my phone up or is there a way to get the image back any help will be welcomed. I can still connect via mtty but the device doesn't come up in my computer anymore or wont connect via active sync.

tonictone said:
Whilst reflashing my diamond touch with a new rom at the stage where you disconnect and hold vol down and back button to start the rom off I had the back off and the battery fell out. Now if I do the above it comes up saying no image found then says trigger usb host and red flash saying usb retry enter usb. Have I meesed my phone up or is there a way to get the image back any help will be welcomed. I can still connect via mtty but the device doesn't come up in my computer anymore or wont connect via active sync.
Click to expand...
Click to collapse
dont worry .. nothing is lost
bring up the phone in bootloader .. vol down reset
connect the usb cable, on screen should write USB (instead of serial)
and now just run the customRUU.exe file that is usualy in archive you downloaded the rom, and just follow the instruciotions.
(like you are flashing without mtty! from computer)

hi man, have you tryed to reinstall drivers ? i don't know what happends to your phone but i'm really sad for you hope it's nothing That can seriously damage it so if i was you, i'll try to reinstall all drivers and use mtty from the 1st step, may be it will work. feed beck plz

R.seed said:
hi man, have you tryed to reinstall drivers ? i don't know what happends to your phone but i'm really sad for you hope it's nothing That can seriously damage it so if i was you, i'll try to reinstall all drivers and use mtty from the 1st step, may be it will work. feed beck plz
Click to expand...
Click to collapse
Now if I do the above it comes up saying no image found then says trigger usb host
Click to expand...
Click to collapse
he forgot to put image on the phone, or to rename it diamimg.nbh ...
reinstall DRIVERS !?

vicai said:
he forgot to put image on the phone, or to rename it diamimg.nbh ...
reinstall DRIVERS !?
Click to expand...
Click to collapse
yes..youre right..i did the same thing, after i've mtty (after type task 8), i forgot to initiate ROM flash and did hard reset+clear memory, so the image (diamimg.nbh) in movinand memory is erased.
So, we still can flash with custom RUU. bring your device in bootloader, you will see serial mode change into usb, then execute custom RUU.exe. follow the instruction.. but make sure your battery is enough..
Hope it help you..

Thanxs Vicai, did as your post recommended and working fine now, thanxs for the quick response

tonictone said:
Thanxs Vicai, did as your post recommended and working fine now, thanxs for the quick response
Click to expand...
Click to collapse
welcome
glad to help

[Q] Htc Desire ermmm bricked :(

Evening everyone
Got a BIG problem with my phone today and having searched and read i still cant fix it
Ok a little about my phone: Rooted with amon recovery, recently s/off, CyanogenMod 7 rom and kernel, -32 radio..
Right here is the problem...
Did a nandroid backup in recovery of the rom i was using ^^ and all seemed fine, i then rebooted my phone,, booted up, waited for everything to work and then i noticed my apps weren't there?
Went into storage and it showed no memory card,, so i rebooted phone hoping this might fix but it didn't.
Plugged my phone into laptop and a message flashed up "usb device not recongnised" i though Sh!t whats happened ?
So i booted my phone into recovery to mount the sd and a message again "error cant mount sd"
Clicked reboot phone and now its stuck on the "why so serious" screen ???????
Ive dloaded the sdk tool but really not sure what i should be typing in there ??
Anyone with a little time care to help me out please lol ???
Cheers
EDIT: I have flashed nearly every rom on xda since i rooted about 4 months ago without any problems, always did the wipes in recovery before flashing so really dont know what has happened here ?

Try formatting SD card, if that doesn't work, reflash recovery
Sent from my Vanilla Tazz using XDA App

Hi mate.
Forgot to mention i did format sd card on pc "fat32" using a sd card reader but that aint solved it
Not re flashed recovery though....
Edit: how can i re flash recovery if my lappy wont recongnise phone
knipp21 said:
Try formatting SD card, if that doesn't work, reflash recovery
Sent from my Vanilla Tazz using XDA App
Click to expand...
Click to collapse

chrisvr4 said:
Hi mate.
Forgot to mention i did format sd card on pc "fat32" using a sd card reader but that aint solved it
Not re flashed recovery though....
Edit: how can i re flash recovery if my lappy wont recongnise phone
Click to expand...
Click to collapse
Looks like you have been usb bricked, look this forum for usb brick fix, its not the fault of the rom, it just sometimes happens. Got it once too, easely to fix.
Sent from my HTC Desire

Im not blaming the rom not one bit as its been running fine this morning up untill i did the backup.
I have read and read that much my heads spinning %-( there's hek of a lot to take in and being a rather noooooob im lost as to what i should do

Worstenbrood is right, that's.just a USB brick, don't worry, it's an easy fix. Search Modaco for USB rickrolled.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
You can skip step one.

Not to worry ? im bricking it lmao
I really aint got a clue about the fastboot thingy if you have a little time could you give me a step by step of how its done
cheers

Download the SDK and then use the command prompt to run the fastboot command from the Modaco tutorial.
There are quite a few guides for fastboot, just Google it

Hi
I just ran the command and when entered it said fastboot not found?

You need to run it from the directory containing fastboot.executive (in the SDK).

thanks for the replies
i have tried that but im getting 'adbwinapi.dll is missing from your computer'
i have re-installed sdk and still wont work?

Did you do this
Windows XP / Vista
Right click on the My Computer icon and select the properties tab.
Select the Advanced tab and click the Environment Variables button.
In the new dialog box dowble-click on Path (located under System Variables) and type in the full path location to the tools directory.
Has to be done for it to work
If you have never used sdk before Google for a good install & how to use guide

whooohoooo right solved the sd problem, new rom flashed and powered up Many Thanks guys "but" i still cant use the usb on laptop ?
When i plug usb in it the phone only charges ? and an usb not recognised message ?

did u install the htc drivers from the htc website? i was having problems with connecting my phone dowloaded those and un-installed sync and all was fixed!

i get 'usb not recognised message' every now and then on my home pc and the works pc both running Windows 7 64bit.
I found that usually when it pops up about
'usb not recognised message'
i just unplug the cable then back in a few seconds after the message then it usually connects ok. sometimes it takes a few attempts.
thats with 'HTC Wildfire_setup_3.0.5481' installed for the 64bit drivers.

Thanks very much guys for all your help managed to get the usb fixed by installing htc sync
But now i have another problem i noticed today is Bluetooth wont turn on ? is there a fix out there for this ?
cheers

Im experiencing strange reboots now with phone plugged into laptop via usb, and on the status bar on phone it show usb debugging and then dissapears and comes back and when i unplug usb the phone reboots?
I wiped the laptop yesterday and phone seemed fine and now the troubles have come back
In logcat error im also getting this message when i enable bluetooth
attempting to remove unknown iface (usb0), ignoring
bt_enable: Timeout waiting for HCI device to come up
Seems as if the brick has actually fooked my phone up good and proper !

[Q] Devs help me please , this is a special case I am having :'(

Devs , I will tell you my story ending with my problem ... So I was trying to upgrade my hboot using the misc editing method so the bootloader will check that the version is similar and won't deny the hboot update , so I edited it successfully and upgraded , unlocked , flashed roms etc ... but after a while , I noticed that I couldn't mount sd as disk drive while USB debugging is on ! neither i can use htc sync even when usb debugging is off , when i select htc sync it automatically turns on usb debugging and bricks the connection ! moreover , in recovery debugging is always on and non-toggle-able , so I can't mount my /sdcard as disk drive through recovery ... I tried reflashing the whole RUU from PC , didn't work , tried getting another misc.img from a working phone and same CID and flashed it , didn't work , tried flashing playing with hboot versions from 1.08.0099 to 1.09 to 08.0000 , not working ... any ideas guys ??

Well you misc is ****ed so try to find a way to repair it or just update with an ota

MrTaco505 said:
Well you misc is ****ed so try to find a way to repair it or just update with an ota
Click to expand...
Click to collapse
OTA will not repair the misc. I tried it once I was misc bricked. And I was really ****ed up because ALL of my misc was filled with garbage.
I had similar effects.
couldn't connect to usb (neither sync nor adb worked)
sdcard was not even recognized.
phone bootet only when cable was connected and many more ****.
@seaskyways: try
Code:
fastboot enableqxdm 0
that fixed at least my sdcard failures at this time.

Missed to tell you that I did the command I now have full sd functionality , and adb is working for me , almost everything , but my current issues are only when usb debugging is on --> I can't mount disk , when usb debugging is off i can (but i use adb very much) , also htc sync doesn't work either ways ...
And for the OTA , it won't work , tried it several times , but once i caused this problem to my brother's wife wfs and then reflashed bootloader and it was fixed , unfortunately mine wasn't by either upgrading , reflashing , or dwngrading ...
I have heard lately that for S-off you can try :
fastboot oem eraseconfig
Click to expand...
Click to collapse
which is supposed to fix the misc , but also i heard that it might erase everything , i dunno , anyways i am not s-off , and if I was i could have done it even without knowing what it does exactly , but whatever it does it should fix the misc so because of that i needed a tester for this command so far ...

[Q] wildfire cannot downgrade to create s-off

Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps

wattamega said:
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
Click to expand...
Click to collapse
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)

no usb comms when in command prompt / adb
eventcom said:
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
--------------------
Thanks eventcom, but I've followed that link and numrerous others and they all follow the same theme.
here is the problem as I see it...
1/I have installed the android driver when in hboot and it works ok as per attatched image
2/ I have installed htc_sync_setup 3.2.20.exe which is the latest driver availiable from the htc website.I then uninstall HTC sync, which leaves HTC driver installer & HTC BMP USB driver remaining as installed ( as per instructions)
3/ I have uninstalled any other USB programs which might conflict including Itunes and ascociated garbage (no i didn't put it there my kids did!).
USB debugging is turned on & when i plug in USB i go charge only (as per instructions)
Here's a hint...
When I execute an adb commandwithin command prompt eg [adb devices] i get no devices. When I issue a adb copy command I get the result "device not found" I'm know i'm going nowhere on this until I can get device to properly talk via adb and this is the assistance that i am seeking
further info.
I've tried this procedure on another (winxp) machine with same results.
Ive tried this procedure on another wildfire "s" (that is already rooted) same results
I've temporarily disabled the AVG 2012 virus protection & firewall.
As well as being in the directory that the file adb.exe exists I have also installed SDK so adb appears to run in any directory (please explain ?)
If i plug in usb and go "mount sd card" I can access the sd card on the phone viawindows explorer . in my mind this tells me that I have correct usb driver working.
I've tried a different usb cable AND a different phone
before I uninstalled htc sync i tried it out. it doesn't work and the phone won't sync up to this program ( it rarely works this program, tried it on numerous pc with different htc devices and more often than not it doesn't work)
I'm hoping that someone who is experienced in adb can help me get the phone talking with my pc, keeping in mind that I've done almost everything that I can think of to get my phone to "talk: via usb cable and issue commands. If I can't get my phone to communicate via adb then there is no way I can get past step one
please help me

wattamega said:
--------------------
please help me
Click to expand...
Click to collapse
i shall do my very best
ok so what system are you currently running? (win7,vista,xp ect)
are you using the stock usb cable that came with the phone?
when you connect the device to the pc with usb debugging turned on do you get the usb debugging notification in your status bar on the phone?
when you plug your device into the pc with debugging enabled what does your device manager recognize it as? mine shows up as attached...
did your antivirus flag up when you were installing the skd or downloading the adb.exe?

Success with debranding but problems with Revolutionary recovery
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...

wattamega said:
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
Click to expand...
Click to collapse
That's ok , power is meant to do that, its the back button you need to use the trackball to select stuff also if I remember correctly that recovery has an issue where it will not charge the phone when it is turned off, so I would update that asap I shall give you a link when I'm out of bed, but for the mean time, backup, wipe everything and install cm7+ gapps
ok here is the most up tp date cwm recovery for the buzz as far as i know. and here is the thread it came from something to note, when you jump up tp gingerbread the type of recovery changes as well, so, the new one will not flash sense roms unless the rom has been designed for the new edify type recovery. not sure how many support this though. also the new recovery will NOT flash radios. it does not play well with others but you can always downgrade your recovery temporarily if you need to, or use the rom manager app (which ic an app interface for the recovery) to flash what you need
Sent from my HTC Sensation using xda premium

Success at last
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.

wattamega said:
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
Click to expand...
Click to collapse
no problem man glad your all kitted out!
wow that cheap this phone cost me £140 when i bought it!!! ( a few years ago) man i got ripped off.... still glad to hear you got sorted out you should always read everything you can carefully before you go flashing your phones
also, just so you know, this wildfire is code named BUZZ and your wildfire s is code named MARVEL just to avoid confusion of course if you need any help with the marvel just let me know. i imagine you've been over to the marvel forum ect but if you get lost pm me. i have experience with that phone as well aside from the name they are completely different, and the marvel does not have s-off yet :/ not by software anyway so everything is different to do :/ still i am rambling now glad your sorted mate :good: