Related
hi every one iv got 1 of this G8 and touch screen do not work so i chenge it but the same problem come up and in bootloader screen its show up as touch panel failed so i need some help please
Moved to general...
need more details.
i had the same problem once with wildfire. i tried to unroot my phone and in the process i accidentally downgraded the radio which made my touch panel failed.
the solution to this is run the latest rom update utility. i mean to say is to update ur HBOOT to the latest one. u can update ur HBOOT from the fastboot menu. u need to keep a zip file in your mem card and rename it to something. the mem card should of FAT32 file system. i would have said about zip file and renaming more clearly if u have given more details.
touch panel failed
thanks for your atention iv don as you seid but do not knew how to bring up that screen which is for sd card. well i think better take it to some one insted thanks and very kind of you.
Regards
first tell me is it the problem with ur htc wildfire.
so, firstly u need to tell what the phone is.
and secondly, u need to tell about the HBOOT version.
u can know the HBOOT version doing the following. switch off the phone and take out the battery. then insert the battery, and if it is wildfire, hold the VOLUME DOWN KEY + POWER KEY. then what u will see is the HBOOT menu. it would be great if u post all the details of HBOOT menu here. atleast post the version of HBOOT.
and tell me the region of u. this is needed to download a region specific OFFICIAL ROM UPDATE UTILITY FILE. and also tell me whether ur phone is a carrier locked phone or a free gsm phone.
thats all.
and donot think that ur phone is bricked. a bricked phone never boots.
hi and thanks for help me out this is my 1 htc wildfire and iv got it from ebay whith the same fault .there is 5 line of green digit in hboot screen as :
1.BUZZ PVT SHIP S-ON
2.HBOOT-0.80.0003
3.TOUCH PANEL-FAIL
4.RADIO-3.35.15.31
5.MEY 28 2010,17:11:46
and my volume key not work any more than last day which i was try to update the USB .and im from birmingham(uk) i had fast boot usb on red in the screen but now its blue when i conect the usb but no more move happen
tell me u belong to which country and which region.
i mean the region from where the phone is purchased. ok u told that u r from UK
give me the purchase date or atleast the month.
TMO or H3G . are these the carriers of uk. if so, tell me ot which ur phone belongs to.
and thats all
i have hboot after insert SD mem(update-cm-7.0.0-buzz-signed)but some kind of green error come up and disapear which is wrote no image on last line.i also did it whith touch failed fix update from hear on xda and the same message come up but im surely have to say that :befor first time conect the USB i could move up and down whith volume key which is not possible now
TMO or H3G.
im from birmingham-uk or EU and the phone come from insid uk which is locked on 3 network and the important thing is i can not have the today screen i meen like a backgrond which i had befor usb conected
yes thats all . giving u the process
H3G yes brother
if i press the power only FAST BOOT come up
power+vol down=HBOOT nothing els would com up
my 1st process to u. ROM UPDATE UTILITY
Now follow the instructions carefully. In 99% cases, u will have ur problem cleared.
Now go to this link,
http://shipped-roms.com/shipped/Buzz/
now here u need to download a file. The file size will be around 140MB and use a download manager.
The file u need to download is
RUU_Buzz_H3G_UK_1.16.771.2_Radio_13.45.55.24_3.35.15.31_release_131501_signed.exe
Once u completed the download, u need to work on a windows pc.
Switch on ur phone and connect it to the windows pc with usb cable. I know ur screen cannot be unlocked. But donot bother this.
Then open the above downloaded file. run as administrator if needed. Then u will be guided through a step by step process called ROM UPDATE UTILITY. All u need to do is to press next, next, update rom and so on like that.
In between the phone also reboots and u can see the progress of the process both in the phone and in the pc. At last u will get an official android 2.1 rom.
Im giving u the process for android 2.1 because i dont want u to loose the ability to get rooted. Android 2.2 for wildfire is not rooted yet. And i hope u r aware of that.
First do this process, and if it gives any error, donot worry, there is another process. I will tell u that if this fails.
So good luck for this. And let me know after u have done it.
dont forget to tell me whether or not it solved
Be careful with the above process. I am not 100% sure whether Wildfire RUUs are compatible with G8's, and, if it isn't, you can very well have a worse problem.
hi bro iv don as you told me and a error messag come up as:
ERROR (170) USB CONNECTION
when i connect the phone whith usb my pc make a beep and iv got android bootloader interface in device manager.yet again have only HBOOT and FAST BOOT screen at all
3xeno said:
Be careful with the above process. I am not 100% sure whether Wildfire RUUs are compatible with G8's, and, if it isn't, you can very well have a worse problem.
Click to expand...
Click to collapse
i think RUUs wont generally brick up the phone in 99.9 % cases. if RUUs cant make the process, they get interrupted by showing some of the error messages like
USB CONNECTION ERROR
BOOTLOADER VERSION ERROR etc.
correct me if im wrong.
DVSS said:
hi bro iv don as you told me and a error messag come up as:
ERROR (170) USB CONNECTION
when i connect the phone whith usb my pc make a beep and iv got android bootloader interface in device manager.yet again have only HBOOT and FAST BOOT screen at all
Click to expand...
Click to collapse
i hope u installed the HTC USB DRIVER. try reinstalling it. and i hope u are not using 64bit windows. some people say that they had this issue with 64bit windows.
have u installed the latest version of HTC SYNC on ur pc. install it if u haven't done that yet.
i suggest u to disable the antivirus and not to run any program in the startup of windows operating system. then try to do the process again.
hey hold on for a sec, im considering what 3xeno said.
finding out the differences between wildfire and G8 wildfire.
i thought u said u once faced the issue with G8 and now facing the issue with wildfire. HOLD ON FOR A SECOND DUDE
DVSS said:
hi every one iv got 1 of this G8 and touch screen do not work so i chenge it but the same problem come up and in bootloader screen its show up as touch panel failed so i need some help please
Click to expand...
Click to collapse
hello dvss.
the thread is not explaining clearly the problem. and moreover, i dont understand whether ur phone is wildfire or a G8.
As i told, i thought u said u once faced the issue with G8 and now facing the issue with wildfire
and if ur phone is a G8, u need to mention at the top of the thread.
3xeno said:
Be careful with the above process. I am not 100% sure whether Wildfire RUUs are compatible with G8's, and, if it isn't, you can very well have a worse problem.
Click to expand...
Click to collapse
are there any download links for G8 RUUs. if they are present using them solves the problem.
and if there are no seperate RUUs for G8, then there is a chance for the wildfire RUUs to be compatible for G8.
Hello my problem is that in cmd when i type the code fastboot oem to get token code, happens nothing, no waiting for device, no error, just nothing , its like i would just press enter. i had researched for a whole day today for the solution did not found anything i had read all the steps how to do that from all kind of forums sites and etc...
you are my last hope to ulock bootloader get root and finaly instal fast rom , i hate this stock lagy rom .
Kind regards
Spec0s
its: "fastboot oem get_identifier_token"
without the ""
should work
greetings
Havoc2k said:
its: "fastboot oem get_identifier_token"
without the ""
should work
greetings
Click to expand...
Click to collapse
yes i wrote the same thing ;/ i just did not write it precicely in my comment.
spec0s said:
yes i wrote the same thing ;/ i just did not write it precicely in my comment.
Click to expand...
Click to collapse
Did you bootup in fastboot?
What does the hox screen say exactly?
twistednl said:
Did you bootup in fastboot?
What does the hox screen say exactly?
Click to expand...
Click to collapse
well i tried in a lot o different ways i booted with fastboot enables / disabled, i did it with One_X_All-In-One_Kit_v1.1 i tried a lot of things basicaly i was doing like this :
1. instal drivers for htc
2. instaled java
3. enabled debuging mode
4. enabled fastboot
5. open cmd write adb devices gives me numbers of my phone etc . everything like in tutorials
6. power button and volume down enter bootloader and entered fastboot
7. wrote command for token and nothing... no respons
i dont know what is hox screen ?
ow and in fastboot it says usb fastboot when i connect usb and when disconect.
Hey,
you should sign up to htc dev, then unlock your bootloader that way.
They explain everything easy, although HTC one X is not listed in the models, just use other supported devices. It works, i know cos i done it myself
goodluck!
smidgeox said:
Hey,
you should sign up to htc dev, then unlock your bootloader that way.
They explain everything easy, although HTC one X is not listed in the models, just use other supported devices. It works, i know cos i done it myself
goodluck!
Click to expand...
Click to collapse
As i mentioned i tried all the methods, and unlocking bootloader and going to dev webpage is the main one for pasting tag in that website and geting unlock tag, and the problem is i cant get that tag becouse of i cant get that comand runing .
So the problem is still on air ((((
please help me some one, i badly want to get a custom rom, stock rom suck ;/ even in the glowing ball it gets some minor lags. the support of nvidia sucks. need developers help for optimization
spec0s said:
please help me some one, i badly want to get a custom rom, stock rom suck ;/ even in the glowing ball it gets some minor lags. the support of nvidia sucks. need developers help for optimization
Click to expand...
Click to collapse
Hey dude here is a link that gives you a video tutorial on how to unlock your bootloader then root. It also gives you all the downloads you need like drivers, fastboot folders ect.... Thanks to zedomax. Read it, watch it and do the same.
http://onexroot.com/one-x-root/how-to-root-one-x/
i have finly found my solution, the problem was with usb port, i knew that if conecting to stationary pc you have to connect to main usb,but i did not know that laptop has a main aswel!!!
so i am unlocked and rooted , going for custom rom !!!
spec0s said:
i have finly found my solution, the problem was with usb port, i knew that if conecting to stationary pc you have to connect to main usb,but i did not know that laptop has a main aswel!!!
so i am unlocked and rooted , going for custom rom !!!
Click to expand...
Click to collapse
I have a whole different problem! i try to unlock the bootloader, get the token, then when i punch in the flash command nothing comes up on my phone, i have also attached a cmd pic with this message... need help on unlocking the bootloader!! have already rooted the phone
PLEASE HELP
How to Locked Bootloader
i purchased my HTC One X on 29 July 2012, but still dont get the latest ICS 4.0.4 and Sense 4.1 update...i went to my HBOOT option its showed ****UNLOCKED***** i dont understand that, is that doing any problem to get update. How can i get update? please help me.....
Pollob said:
i purchased my HTC One X on 29 July 2012, but still dont get the latest ICS 4.0.4 and Sense 4.1 update...i went to my HBOOT option its showed ****UNLOCKED***** i dont understand that, is that doing any problem to get update. How can i get update? please help me.....
Click to expand...
Click to collapse
Please ensure that you have the stock rom and stock recovery flashed/installed on your One X.
Sent from my HTC One X
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
smidgeox said:
Please ensure that you have the stock rom and stock recovery flashed/installed on your One X.
Sent from my HTC One X
Click to expand...
Click to collapse
Also it may be that your carrier hasn't released the update yet.
Sent from my HTC One X
Not Getting Update One X
Thanks for your reply, I purchased my One X from a local shop here in Bangladesh. Then i saw i am not getting latest ICS 4.0.4 and Sense 4.1 then i contact with HTC customer team by email, then i found My bootloader is unlocked. they told me your phone will not support HTC update. I dont know much about the phone.
How to check stock rom and stock recovery flashed/installed on my One X?
...I open my HBOOT option it showed *****UNLOCKED*****the shop manager told me lie that this phone is factory unlocked. please help me to get update. please please please...my IMEI no- 353043058074330......Device serial No- SH251W101776....IMSI- 470021703087795...Software No- 1.26.401.2..HTC SDK API Level - 4.11...HTC Extension Version- HTCExtension_403_1_GA_3...Kernel Version- [email protected]#1..SMP PREEMPT Sat Apr 14 07:22:44 CST 2012,...Baseband Version - 1.1204.90.13...Build No- 1.26.401.2 CL47163 release-keys..Browser- Webkit/534.30.............i gave you all the internal information. plz help...
You need to install the stock ROM, if you do:
fastboot getvar mainver
I think, and then you can find the RUU with the matching number and flash it.
Let us know what you get returned from fastboot command.
How to install stock Rom I think I have already install custom Rom, coz I have no vodafon logo or software, what is ruu? Actually I don't know anything about Rom and root. Plz help me..
Please I have a peculiar problem, I pray you can assist me. I tried to root my telus dhd using advanced hack kit, after running the hack kit the phone failed to reboot. It stock at a blank bLack screen. To solve that, I mistakenly flash a froyo pd98img on a GB ROM. Since then, the phone takes about 20 to 30 minutes to boot. It will start with a splash screen and vibrate for about 10 minutes then takes another 10 minutes to boot. The problem is I can't enter boot loader and I can't use the hack kit again to return to stock since the phone won't reboot in the process.
I will appreciate any help. Thanks for your time.
And why exactly can't you enter the bootloader? Remove and re-insert your battery, Press Vol Down and Power button to boot into the bootloader.
Can you post the text that appears on the bootloader? Is your phone S-OFF yet?
degreatone said:
Please I have a peculiar problem, I pray you can assist me. I tried to root my telus dhd using advanced hack kit, after running the hack kit the phone failed to reboot. It stock at a blank bLack screen. To solve that, I mistakenly flash a froyo pd98img on a GB ROM. Since then, the phone takes about 20 to 30 minutes to boot. It will start with a splash screen and vibrate for about 10 minutes then takes another 10 minutes to boot. The problem is I can't enter boot loader and I can't use the hack kit again to return to stock since the phone won't reboot in the process.
I will appreciate any help. Thanks for your time.
Click to expand...
Click to collapse
Sounds like a messed bootloader. Go to the Ace Think Tank thread linked in my signature. Find the PDF in post #7. In that, read about the messed bootloader fix.
if4ct0r said:
And why exactly can't you enter the bootloader? Remove and re-insert your battery, Press Vol Down and Power button to boot into the bootloader.
Can you post the text that appears on the bootloader? Is your phone S-OFF yet?
Click to expand...
Click to collapse
volume down and power button doesn't work, the phone won't boot that way. I don't think its s-off
[QUOTtgranola;32865757]Sounds ns like a messed bootloader. Go to the Ace Think Tank thread linked in my signature. Find the PDF in post #7. In that, read about the messed bootloader fix.[/QUOTE]
Yes, it's messed up bootloader. Yesterday on #ahksupport, @attn1 gave an adb command, which after typing it, The phone booted to a black screen with HTC on it. Then he gave me a link to a file which he ask me to paste in cmd window. But unfortunately he changed his mind due my inability to respond swiftly to his question.
I have found the PDF, will give it a try. Thanks
Update: This is the file uploaded to by @attn1 yesterday. I believe it's an extracted and unlocked bootloader. The only problem is that I don't know how to flash it. If anyone can assist me.
degreatone said:
Please I have a peculiar problem, I pray you can assist me. I tried to root my telus dhd using advanced hack kit, after running the hack kit the phone failed to reboot. It stock at a blank bLack screen. To solve that, I mistakenly flash a froyo pd98img on a GB ROM. Since then, the phone takes about 20 to 30 minutes to boot. It will start with a splash screen and vibrate for about 10 minutes then takes another 10 minutes to boot. The problem is I can't enter boot loader and I can't use the hack kit again to return to stock since the phone won't reboot in the process.
I will appreciate any help. Thanks for your time.
Click to expand...
Click to collapse
I have the same problem... if u can enter in boot menu ur are saved... u need to instal GB rom back on your phone, you have link here http://forum.xda-developers.com/showthread.php?t=1335027 if I'm right your RUU is smoething .707.4..download that, connect your dhd on usb and run that program..it will instal your old rom. when u do that fin AHK that is updated one month ago and run it. that helped me. And sorry on bad eanglish
bananagranola said:
Sounds like a messed bootloader. Go to the Ace Think Tank thread linked in my signature. Find the PDF in post #7. In that, read about the messed bootloader fix.
Click to expand...
Click to collapse
Alexi666 said:
I have the same problem... if u can enter in boot menu ur are saved... u need to instal GB rom back on your phone, you have link here http://forum.xda-developers.com/showthread.php?t=1335027 if I'm right your RUU is smoething .707.4..download that, connect your dhd on usb and run that program..it will instal your old rom. when u do that fin AHK that is updated one month ago and run it. that helped me. And sorry on bad eanglish
Click to expand...
Click to collapse
Is yours Telus too? I downloaded an RUU intending to flash it using windows, the computer detects the phone but I was afraid. I read in some forums that flashing the RUU in this situation can lead to brick! Pls advise me. Thanks for the reply
degreatone said:
Is yours Telus too? I downloaded an RUU intending to flash it using windows, the computer detects the phone but I was afraid. I read in some forums that flashing the RUU in this situation can lead to brick! Pls advise me. Thanks for the reply
Click to expand...
Click to collapse
Just make sure you read properly how to do it before proceeding. Read the guide bananagranola gave you and follow the instructions. We can help with almost anything but conquering your fear. Unless you want glevitan to connect to your computer via teamviewer and have him press 'next'.
Sent from a dream.
degreatone said:
Yes, it's messed up bootloader. Yesterday on #ahksupport, @attn1 gave an adb command, which after typing it, The phone booted to a black screen with HTC on it. Then he gave me a link to a file which he ask me to paste in cmd window. But unfortunately he changed his mind due my inability to respond swiftly to his question.
I have found the PDF, will give it a try. Thanks
Update: This is the file uploaded to by @attn1 yesterday. I believe it's an extracted and unlocked bootloader. The only problem is that I don't know how to flash it. If anyone can assist me.
Click to expand...
Click to collapse
Ok, this is what you have to do. I sent you the pastebin link in the IRC channel yesterday but afterwards attn1 told me that that solution would not work in your case. You need to flash that HBOOT in this way:
Code:
adb reboot oem-78
wget https://dl.dropbox.com/u/13152450/ace/PD9812000_Ace_Gingerbread_S_hboot_0.85.0024.zip --no-check-certificate
fastboot flash zip PD9812000_Ace_Gingerbread_S_hboot_0.85.0024.zip
The code will also download the hboot....BE PATIENT IT WILL TAKE TIME TO FLASH...RELAX AND ENJOY
glevitan said:
Ok, this is what you have to do. I sent you the pastebin link in the IRC channel yesterday but afterwards attn1 told me that that solution would not work in your case. You need to flash that HBOOT in this way:
Code:
adb reboot oem-78
wget https://dl.dropbox.com/u/13152450/ace/PD9812000_Ace_Gingerbread_S_hboot_0.85.0024.zip --no-check-certificate
fastboot flash zip PD9812000_Ace_Gingerbread_S_hboot_0.85.0024.zip
The code will also download the hboot....BE PATIENT IT WILL TAKE TIME TO FLASH...RELAX AND ENJOY
Click to expand...
Click to collapse
I will try that now. Thanks a lot
glevitan said:
Ok, this is what you have to do. I sent you the pastebin link in the IRC channel yesterday but afterwards attn1 told me that that solution would not work in your case. You need to flash that HBOOT in this way:
Code:
adb reboot oem-78
wget https://dl.dropbox.com/u/13152450/ace/PD9812000_Ace_Gingerbread_S_hboot_0.85.0024.zip --no-check-certificate
fastboot flash zip PD9812000_Ace_Gingerbread_S_hboot_0.85.0024.zip
The code will also download the hboot....BE PATIENT IT WILL TAKE TIME TO FLASH...RELAX AND ENJOY
Click to expand...
Click to collapse
I sent the code, the phone rebooted to a black HTC screen, and has been on it for almost an hour now? Is it normal? Tanks for the help, it's appreciated.
It shows white screen now with the following information:
Ace pvt ship s-on
Hboot-0. 85.0007
Macrop -0438
Radio 26.03.04.26_m
RUU
What should I do next?
degreatone said:
Is yours Telus too? I downloaded an RUU intending to flash it using windows, the computer detects the phone but I was afraid. I read in some forums that flashing the RUU in this situation can lead to brick! Pls advise me. Thanks for the reply
Click to expand...
Click to collapse
im not sure, i know that it was asian and 707.4... usualy u can't do nothing with usb because u can't turn on debbuging on your phone, with that RUU asian 707.4 u can instal rom without debbuging.. i'm not sure but if u can access hboot your dhd is not bricked and there is hope to install rom on it.. i was spent 6h reading forums to find solution for my problem
degreatone said:
I sent the code, the phone rebooted to a black HTC screen, and has been on it for almost an hour now? Is it normal? Tanks for the help, it's appreciated.
It shows white screen now with the following information:
Ace pvt ship s-on
Hboot-0. 85.0007
Macrop -0438
Radio 26.03.04.26_m
RUU
What should I do next?
Click to expand...
Click to collapse
that is normal as you don´t have a RUU in your phone. Does it still take long time to boot in hboot? from there you should be able to flash a RUU as that hboot supports multiple CIDs
I don't think it worked as he is still showing the .007 boot which is froyo.
Question why wouldn't your guide work in this case? Is it because of it being the nam version(pd12000 vs pd10000)? Hboot versions not interchangeable?or something else that as mentioned in the irc
marsdta said:
I don't think it worked as he is still showing the .007 boot which is froyo.
Question why wouldn't your guide work in this case? Is it because of it being the nam version(pd12000 vs pd10000)? Hboot versions not interchangeable?or something else that as mentioned in the irc
Click to expand...
Click to collapse
to be strictly plain I am not quite sure..but Attn1 told me that the fix in the guide will only work with just one RUU build 1.32.xxx can't remember now. So he has to flash a new hboot that will allow multiple CIDs...
Sent from my GT-N7000 using xda app-developers app
glevitan said:
that is normal as you don´t have a RUU in your phone. Does it still take long time to boot in hboot? from there you should be able to flash a RUU as that hboot supports multiple CIDs
Click to expand...
Click to collapse
Can I go ahead and flash an RUU now? If yes, can I flash any gb ruu or it has to be telus?
How do I flash it? Am I going to extract the image and place it on sd card or run the. exe file from computer.
Am highly grateful for the help. Thank you
degreatone said:
Can I go ahead and flash an RUU now? If yes, can I flash any gb ruu or it has to be telus?
How do I flash it? Am I going to extract the image and place it on sd card or run the. exe file from computer.
Am highly grateful for the help. Thank you
Click to expand...
Click to collapse
Just one question...when you flashed the hboot did you get the OKAY.finished in the command prompt? Your is still at slow motion for booting??
If the answers to the question are: Yes. No...then you can flash an unbranded RUU and it should work. :good:
glevitan said:
Just one question...when you flashed the hboot did you get the OKAY.finished in the command prompt? Your is still at slow motion for booting??
If the answers to the question are: Yes. No...then you can flash an unbranded RUU and it should work. :good:
Click to expand...
Click to collapse
No, I didn't get OKAY in the command, It didn't show finished. The phone screen just showed black with HTC written on it for almost two hours. Then eventually it rebooted to white screen withe info I posted above. Yes it's still at the motion boot.
degreatone said:
No, I didn't get OKAY in the command, It didn't show finished. The phone screen just showed black with HTC written on it for almost two hours. Then eventually it rebooted to white screen withe info I posted above. Yes it's still at the motion boot.
Click to expand...
Click to collapse
Then I don´t think you have flashed the hboot....the process will take 2 or 3 hours I guess. You need to get OKAY. Finished near the end to know that you have achived the goal.
If you want I can lend you a hand via teamviewer (http://www.teamviewer.com/) but you have to put the phone in fastboot usb first. When you are there just send me the ID and PASS over a Private Message (PM)...
glevitan said:
Then I don´t think you have flashed the hboot....the process will take 2 or 3 hours I guess. You need to get OKAY. Finished near the end to know that you have achived the goal.
If you want I can lend you a hand via teamviewer (http://www.teamviewer.com/) but you have to put the phone in fastboot usb first. When you are there just send me the ID and PASS over a Private Message (PM)...
Click to expand...
Click to collapse
Thanks for the assistance. I will try the command again to night, if unsuccessful I will send you a pm tomorrow. Once again, thanks
Hello there ..
I followed the instruction form HTCdev.com and after i flashed with unlock_code.bin, the phone restart and when i get back to the bootloader,
it is still locked ... help me please ...
zyrmin said:
Hello there ..
I followed the instruction form HTCdev.com and after i flashed with unlock_code.bin, the phone restart and when i get back to the bootloader,
it is still locked ... help me please ...
Click to expand...
Click to collapse
Try to repeat the whole process and make sure to follow the all the steps carefully. ggod luck
i did it carefully .. 3 desire 816s .. 2 are done smoothly .. but failed at the last one .. :'(
zyrmin said:
Hello there ..
I followed the instruction form HTCdev.com and after i flashed with unlock_code.bin, the phone restart and when i get back to the bootloader,
it is still locked ... help me please ...
Click to expand...
Click to collapse
what is your phones bootloader status say ? Locked or Re-locked ? Whatever it may be, once you receive the unlock_code.bin of your own mobile (not others), you might want to open the command prompt from the adb fastboot folder, then type the following command (hopefully you might have done right, but just incase if you miss one letter or jumble it, it wont work)
fastboot flash unlock token Unlock_code.bin
It is case sensitive. so type carefully or try to paste it from here. This should unlock your phone. If still not, then the unlock_code.bin you got might have issues. So register on htcdev again with different email id, and use that.
All the best. Hit thanks if this post deserves it.
Hi all,
After spending bunch if time seeking a solution, I found no one met this kind of issue when unlocking bootloader.
First, I wanted to unlock the bootloader as it was the only solution to fix a soft-brick on my phone. At switching-on, the phone starts with HTC green logo on white screen and stay on, and then vibrate 4 times and nothing else happens.
Recovery option through HBOOT menu does not solve it.
So under HBOOT menu, I plugged the usb cable, and proceed with the bootloader unlocking procedure according the step by step procedure on HTC Dev website & our famous forum.
Everything' goes well until i send the .bin unlock file to the phone in FASTBOOT USB mode, then it displays the unloack bootloader prompt window.
BUT it is impossible to validate the choice "YES Unlock bootloader (may void your warranty). Absolutely nothing happens when I press the power button, WHEREAS the choice "NO" works and reboot my phone the the HBOOT Menu.
So, it seems as a kind of another protection is blocking the bootloader unlocking ??
Phone information are the following :
*** LOCKED ***
***Security Warning ***
G3U PVT SHIP S-ON RH
HBOOT-1.18.0002
RADIO-14.11.36Q4.21
OS-1.10.401.4
eMMC-boot
Nov 12 2013, 11:57:38.0
If anyone has an idea to explore a solution, i'd be pleased to try it .
Thanks a lot.
On htc's unlock bootloader page, which version did you try?
I used "All other supported models" and it unlocked mine without problems.
(my device has the same hboot but a slightly different radio version)
4m8 said:
On htc's unlock bootloader page, which version did you try?
I used "All other supported models" and it unlocked mine without problems.
(my device has the same hboot but a slightly different radio version)
Click to expand...
Click to collapse
I chosen "All other supported models" , as the model is not listed.
Otherwise i guess it wouldn't have given me the bin file .
gitanus said:
I chosen "All other supported models" , as the model is not listed.
Otherwise i guess it wouldn't have given me the bin file .
Click to expand...
Click to collapse
Well it's the only point in the procedure I could think off that might have been misunderstood.
(Desire * could have been misinterpreted as any desire model instead of needs hboot upgrade)
Other than that and the obvious keep trying until it works, I'm out of ideas that could be of use to you.
Sorry & Good Luck
Maybe the desire* one would work. I used the All Supported Models option also and it didn't gave me any problems unlocking it.
Sarmiento_Luise said:
Maybe the desire* one would work. I used the All Supported Models option also and it didn't gave me any problems unlocking it.
Click to expand...
Click to collapse
Ive also tried on HtcDev website (i have HTC desire 300), Desire model, all supported models, numerous times, and i have the same problem, it just wont unlock, It doesnt respond when i try to click yes to unlock it.
Does anyone know the solution ?
prestigous27 said:
Ive also tried on HtcDev website (i have HTC desire 300), Desire model, all supported models, numerous times, and i have the same problem, it just wont unlock, It doesnt respond when i try to click yes to unlock it.
Does anyone know the solution ?
Click to expand...
Click to collapse
i have the exact same problem. can't unlock the bootloader, can't enter the recovery menu, can't reset it to factory settings. you were able to fix it after all? it's so strange, i've unlocked lots of htc's but i've never been in this situation before.
Bump!!! Please anyone solved this problem?
Andmanx said:
Bump!!! Please anyone solved this problem?
Click to expand...
Click to collapse
A certain guy at a service shop told me it is probably a bricked EMMC chip where the bootloader and recovery are, so you can't do anything about it.
I'm no expert, so I don't know if this makes any sense, but that was what I was told.
I have HTC desire 300 and I unlocked bootloader with no problem when unlock bootloader screen came I just used volume key to select yes and then pressed power button and it rebooted and unlocked. I suggest you try all procedure again on another computer.
I've same problem on HTC Desire 500((
no PC problem, no .bin file problem
Power button respond only in NO position
I have same problem with a desire 300. I used both bins (all supported devices and desire *) with no success. Only No option responds.
I have same issue, power button responds on NO not on Yes.