hi every one iv got 1 of this G8 and touch screen do not work so i chenge it but the same problem come up and in bootloader screen its show up as touch panel failed so i need some help please
Moved to general...
need more details.
i had the same problem once with wildfire. i tried to unroot my phone and in the process i accidentally downgraded the radio which made my touch panel failed.
the solution to this is run the latest rom update utility. i mean to say is to update ur HBOOT to the latest one. u can update ur HBOOT from the fastboot menu. u need to keep a zip file in your mem card and rename it to something. the mem card should of FAT32 file system. i would have said about zip file and renaming more clearly if u have given more details.
touch panel failed
thanks for your atention iv don as you seid but do not knew how to bring up that screen which is for sd card. well i think better take it to some one insted thanks and very kind of you.
Regards
first tell me is it the problem with ur htc wildfire.
so, firstly u need to tell what the phone is.
and secondly, u need to tell about the HBOOT version.
u can know the HBOOT version doing the following. switch off the phone and take out the battery. then insert the battery, and if it is wildfire, hold the VOLUME DOWN KEY + POWER KEY. then what u will see is the HBOOT menu. it would be great if u post all the details of HBOOT menu here. atleast post the version of HBOOT.
and tell me the region of u. this is needed to download a region specific OFFICIAL ROM UPDATE UTILITY FILE. and also tell me whether ur phone is a carrier locked phone or a free gsm phone.
thats all.
and donot think that ur phone is bricked. a bricked phone never boots.
hi and thanks for help me out this is my 1 htc wildfire and iv got it from ebay whith the same fault .there is 5 line of green digit in hboot screen as :
1.BUZZ PVT SHIP S-ON
2.HBOOT-0.80.0003
3.TOUCH PANEL-FAIL
4.RADIO-3.35.15.31
5.MEY 28 2010,17:11:46
and my volume key not work any more than last day which i was try to update the USB .and im from birmingham(uk) i had fast boot usb on red in the screen but now its blue when i conect the usb but no more move happen
tell me u belong to which country and which region.
i mean the region from where the phone is purchased. ok u told that u r from UK
give me the purchase date or atleast the month.
TMO or H3G . are these the carriers of uk. if so, tell me ot which ur phone belongs to.
and thats all
i have hboot after insert SD mem(update-cm-7.0.0-buzz-signed)but some kind of green error come up and disapear which is wrote no image on last line.i also did it whith touch failed fix update from hear on xda and the same message come up but im surely have to say that :befor first time conect the USB i could move up and down whith volume key which is not possible now
TMO or H3G.
im from birmingham-uk or EU and the phone come from insid uk which is locked on 3 network and the important thing is i can not have the today screen i meen like a backgrond which i had befor usb conected
yes thats all . giving u the process
H3G yes brother
if i press the power only FAST BOOT come up
power+vol down=HBOOT nothing els would com up
my 1st process to u. ROM UPDATE UTILITY
Now follow the instructions carefully. In 99% cases, u will have ur problem cleared.
Now go to this link,
http://shipped-roms.com/shipped/Buzz/
now here u need to download a file. The file size will be around 140MB and use a download manager.
The file u need to download is
RUU_Buzz_H3G_UK_1.16.771.2_Radio_13.45.55.24_3.35.15.31_release_131501_signed.exe
Once u completed the download, u need to work on a windows pc.
Switch on ur phone and connect it to the windows pc with usb cable. I know ur screen cannot be unlocked. But donot bother this.
Then open the above downloaded file. run as administrator if needed. Then u will be guided through a step by step process called ROM UPDATE UTILITY. All u need to do is to press next, next, update rom and so on like that.
In between the phone also reboots and u can see the progress of the process both in the phone and in the pc. At last u will get an official android 2.1 rom.
Im giving u the process for android 2.1 because i dont want u to loose the ability to get rooted. Android 2.2 for wildfire is not rooted yet. And i hope u r aware of that.
First do this process, and if it gives any error, donot worry, there is another process. I will tell u that if this fails.
So good luck for this. And let me know after u have done it.
dont forget to tell me whether or not it solved
Be careful with the above process. I am not 100% sure whether Wildfire RUUs are compatible with G8's, and, if it isn't, you can very well have a worse problem.
hi bro iv don as you told me and a error messag come up as:
ERROR (170) USB CONNECTION
when i connect the phone whith usb my pc make a beep and iv got android bootloader interface in device manager.yet again have only HBOOT and FAST BOOT screen at all
3xeno said:
Be careful with the above process. I am not 100% sure whether Wildfire RUUs are compatible with G8's, and, if it isn't, you can very well have a worse problem.
Click to expand...
Click to collapse
i think RUUs wont generally brick up the phone in 99.9 % cases. if RUUs cant make the process, they get interrupted by showing some of the error messages like
USB CONNECTION ERROR
BOOTLOADER VERSION ERROR etc.
correct me if im wrong.
DVSS said:
hi bro iv don as you told me and a error messag come up as:
ERROR (170) USB CONNECTION
when i connect the phone whith usb my pc make a beep and iv got android bootloader interface in device manager.yet again have only HBOOT and FAST BOOT screen at all
Click to expand...
Click to collapse
i hope u installed the HTC USB DRIVER. try reinstalling it. and i hope u are not using 64bit windows. some people say that they had this issue with 64bit windows.
have u installed the latest version of HTC SYNC on ur pc. install it if u haven't done that yet.
i suggest u to disable the antivirus and not to run any program in the startup of windows operating system. then try to do the process again.
hey hold on for a sec, im considering what 3xeno said.
finding out the differences between wildfire and G8 wildfire.
i thought u said u once faced the issue with G8 and now facing the issue with wildfire. HOLD ON FOR A SECOND DUDE
DVSS said:
hi every one iv got 1 of this G8 and touch screen do not work so i chenge it but the same problem come up and in bootloader screen its show up as touch panel failed so i need some help please
Click to expand...
Click to collapse
hello dvss.
the thread is not explaining clearly the problem. and moreover, i dont understand whether ur phone is wildfire or a G8.
As i told, i thought u said u once faced the issue with G8 and now facing the issue with wildfire
and if ur phone is a G8, u need to mention at the top of the thread.
3xeno said:
Be careful with the above process. I am not 100% sure whether Wildfire RUUs are compatible with G8's, and, if it isn't, you can very well have a worse problem.
Click to expand...
Click to collapse
are there any download links for G8 RUUs. if they are present using them solves the problem.
and if there are no seperate RUUs for G8, then there is a chance for the wildfire RUUs to be compatible for G8.
Related
Hi all
I had just try root my desire to get froyo installed.
First I run downgrade23 folder with included files, to get Hboot from 0.93 to 0.80
After that my phone crash, its hang with HTC logo.
Some one help me to get my phone back to life...
I am a noob on this so please explain carefully so I understand...
HELP please......
tefortwo said:
Hi all
I had just try root my desire to get froyo installed.
First I run downgrade23 folder with included files, to get Hboot from 0.93 to 0.80
After that my phone crash, its hang with HTC logo.
Some one help me to get my phone back to life...
I am a noob on this so please explain carefully so I understand...
HELP please......
Click to expand...
Click to collapse
someone realls should update the tutorial. There is no need to downgrad to older hboot with the newest unrevoked.
EDIT: Is your phone branded? Did you write down you exact version number before you flashed anything?
Have you tried to run the new unrevoked in the state its in now?
Branded?version number?
What you mean....
I try to run the new unrevoked3 but program just say "waiting for device"
I check in device manager and can see that Android bootloader iinterface appear.
But nothing happend....
What to to??HELP ME
I need to get my phone back to life...
There must be away to fixx it??
was you phone network branded? as in did a network logo appear when you turned your phone on
tefortwo said:
I try to run the new unrevoked3 but program just say "waiting for device"
I check in device manager and can see that Android bootloader iinterface appear.
But nothing happend....
What to to??HELP ME
I need to get my phone back to life...
There must be away to fixx it??
Click to expand...
Click to collapse
Did you enable USB Debugging? Settings > Applications > Development > USB Debugging.
There probably is a way to recover your phone, but it isn't helping that you didnt write down you version numbers and/or read in the forum before you started the root process.
Is your phone branded?: Is it a provider-phone i.e. t-mobile, vodafone etc? To give a definite answer on that you need to know the exact version number (like 2.29.405.5). Without this number you can afaik just guess - did you see a logo other than htc's on bootup? Where there any provider-specific apps preinstalled on your phone? Where did you buy it?
My first guess is to boot into fastboot (power on while holding "back"-key) and flash the correct ruu ( Download here)
If its unbranded, the correct RUU is RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe.
After that your phone is completely back to stock and you can retry the rooting-prodedure but with the newest unrevoked and without downgrading hboot
EDIT: Am I correct in thinking that you can't boot up your phone and a stuck on the first htc-logo (before the annoying sound)? If no, forget all the above.
Can you boot into recovery? (power on while hitting vol-, then wait 10 seconds, then highlight "recovery" with vol-/vol+, select with power, wait another 5 seconds, hit vol+ + power (I think ^^)
Hi
I check before I do the downgrade procedure that its hads this number:2.29.405.5
And I try to get unrevoked now and no communication.
I also had USB debugging on before it crash.
Now its just freeze on HTC logo and after that a red triangle with a phone symbol.
tefortwo said:
Hi
I check before I do the downgrade procedure that its hads this number:2.29.405.5
Click to expand...
Click to collapse
That means your phone is not branded ('405' is the important part).
The get unrevoked working you need your phone to be booted up. So you probably need to run the ruu first.
How can I start ruu?
What is the step to install that RUU?
Do I need to install something on the SDcard?
Do I need a PC to do this?
tefortwo said:
How can I start ruu?
What is the step to install that RUU?
Do I need to install something on the SDcard?
Do I need a PC to do this?
Click to expand...
Click to collapse
As I said, you download the RUU[...].exe I posted earlier. Then you boot your phone into fastboot (power+back-Key ) and run the downloaded ruu.exe on your PC. Piece of cake.
But wait for someone else to confirm.
I try to start the RUU but got an Error....on the PC
What to do?
I run Windows7 on PC.
Why can`t I run the RUU file??any clue....
Are you using 32 or 64 Bit? Sometimes 64 bit cause problems. What did the error say?
Just right click and and run as administrator.. run your RUU that way
Well, I use 32bit Enterprise version and right click as administrator, still fail to open....
Help......
This is the error message below:
SetupNew\setup.cpp(140)
PAPP
PVENDOR:
PGUID
$
@Wndows Vista Service Pack 1(7601)
IE Version 9.0.8112.16421
What RUU is for me????
I have Telia simcard...Its seems that your info dont help me....
There must be some expert out there....can someone help me please...
I run this
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed.exe.
Its start but get an error "170" USB connection...well
I am confused now....seems that I cant connect to phone..
Help me....please
Is the phone dead now????do I need to send it back to vendor for repair???
Hi
I´m in trouble with my Desire and need professional help.
It´s a (was a?) 093.0001 with root and s-off
I´ve installed Leedroid V3.07 (Gingerbread) incl. Custom HBoot for data++ and the Radio 32.56.00.32U_5.17.05.08
I´ve tried to flash it back to original by using the orig. 2.2 Stock Rom from HTC. As far as I know should this be enough to bring it back to original.
Now there is the following problem:
The update breaks with the message, I´ve got to use an other RUU. The phone hangs with a black screen and triangles in it.
I can not start it in BL mode. It hangs with a partition failure.
Is this a fullbrick or is there a way to fix it? Does the radio make this problems? How can i create a higher radio number to overflash it?
What woulda real specialist do now?
Thanks for help...
[email protected] said:
Hi
I´m in trouble with my Desire and need professional help.
It´s a (was a?) 093.0001 with root and s-off
I´ve installed Leedroid V3.07 (Gingerbread) incl. Custom HBoot for data++ and the Radio 32.56.00.32U_5.17.05.08
I´ve tried to flash it back to original by using the orig. 2.2 Stock Rom from HTC. As far as I know should this be enough to bring it back to original.
Now there is the following problem:
The update breaks with the message, I´ve got to use an other RUU. The phone hangs with a black screen and triangles in it.
I can not start it in BL mode. It hangs with a partition failure.
http://forum.xda-developers.com/showthread.php?t=695
Is this a fullbrick or is there a way to fix it? Does the radio make this problems? How can i create a higher radio number to overflash it?
What woulda real specialist do now?
Thanks for help...
Click to expand...
Click to collapse
Hi Patrick,
This happens usually with branded phones. In this thread you'll have to find the appropriate RUU, the RUU designed for your phone's original carrier. Did you make a goldcard ?
No, I did not make a goldcard.
I thought, Goldcard is not longer needed, so I dind´t make one...
But I´m a step closer (or did I make a sep back?)
I had acces via fastboot and tried to flash an other stock ROM via fastbootcommander...
Now I have the old HBOOT 0.93.0001 and my old radio. I´n not root anymore, and s-on is now printed in the display - but the flash stops with an partition failure again...
Is the partition failure the point to search for branded roms?
[email protected] said:
No, I did not make a goldcard.
I thought, Goldcard is not longer needed, so I dind´t make one...
But I´m a step closer (or did I make a sep back?)
I had acces via fastboot and tried to flash an other stock ROM via fastbootcommander...
Now I have the old HBOOT 0.93.0001 and my old radio. I´n not root anymore, and s-on is now printed in the display - but the flash stops with an partition failure again...
Is the partition failure the point to search for branded roms?
Click to expand...
Click to collapse
Do you have any idea if your phone is branded ?
No, I have no idea... bevore I start rooting i did not have seen any signs for a branding.
Mostly the desire shows an own startlogo from the carrier, isn´t it?
My problem is, the update is starting, but it aborts at ~50% with this failure...
All other updates won´t start, just this one RUU goes up to 50 percent...
[email protected] said:
No, I have no idea... bevore I start rooting i did not have seen any signs for a branding.
Mostly the desire shows an own startlogo from the carrier, isn´t it?
Click to expand...
Click to collapse
I didn't see any ROM for a German provider. Which RUU did you try to flash ?
paul.c said:
I didn't see any ROM for a German provider. Which RUU did you try to flash ?
Click to expand...
Click to collapse
I try this one:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Is there a way to dump a firmware from a running desire?
[email protected] said:
I try this one:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Is there a way to dump a firmware from a running desire?
Click to expand...
Click to collapse
I see. How does the error sound exactly ?
Maybe this RUU would help: http://shipped-roms.com/download.ph...io_32.30.00.28U_4.05.00.11_release_121684.exe
Edit: check this out: http://oxygenrom.com/viewtopic.php?f=5&t=190
Edit: this is a slightly older WWE RUU: http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
this rom does nor work for me... I tried it a few times theis night...
The Error sounds [Error 131] - This Rom Update Utility can not update this Android Phone - Get the right ROM Update Utility Program and try again.
Sorry, I´m not very good in translating things, but Error 131 is the Problem for now...
Bevore this it told me there was a partition failure (step 6)...
[email protected] said:
this rom does nor work for me... I tried it a few times theis night...
The Error sounds [Error 131] - This Rom Update Utility can not update this Android Phone - Get the right ROM Update Utility Program and try again.
Sorry, I´m not very good in translating things, but Error 131 is the Problem for now...
Bevore this it told me there was a partition failure (step 6)...
Click to expand...
Click to collapse
Have you installed HTC Sync and drivers ?
I have installed the correct drivers, HTC Sync is not installed anymore...
I wonder that I have no access to my bootloader, just this black screen. But if I pull off the cable from my desire, i have the white bootloader screen, just without any entrys...
[email protected] said:
I have installed the correct drivers, HTC Sync is not installed anymore...
I wonder that I have no access to my bootloader, just this black screen. But if I pull off the cable from my desire, i have the white bootloader screen, just without any entrys...
Click to expand...
Click to collapse
You need HTC Sync. Start your phone in fastboot (back button + power), connect you phone and run RUU.
I´ve tried it a serval times, as admin, without admin rights, various combinations of rights and versions and have everytime the same problem...
I cann not see the phone starting in fastboot, even if I try to boot, the phone hangs with this black pic...
If I disconnect the cable from the phone I see the white page, but the last Entry is ruu, nothing more... there is nothing I can navigate to.
[email protected] said:
I´ve tried it a serval times, as admin, without admin rights, various combinations of rights and versions and have everytime the same problem...
I cann not see the phone starting in fastboot, even if I try to boot, the phone hangs with this black pic...
If I disconnect the cable from the phone I see the white page, but the last Entry is ruu, nothing more... there is nothing I can navigate to.
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=921398&highlight=create+goldcard
Hey [email protected] . . 1st check if your pc is recognising your phone.
Connect to pc and check in device manager what is it showing.. should be adb or bootloader interface.. if not try to install adb driver...
than once its done.
try to run this RUU
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
basically error 131 is for CID.. so you will require a goldcard for that.. just try your luck .. remove both memory card and simcard.. and run the RUU..
Let us know the results
Allright everybody - It works! Feels like birthday @ christmas together, including a final blowjob and a cold beer togeter
What did I do? I´ve created a new goldcard on a second desire, used this card and started the final RUU again - That was all... Little think, big Impression
I thought all the time, the goldcard was specific for the telephone, but it was specially for the memory card.
Thanks a lot for all of your help! I know, there were many help for this stupid guy
But you all have saved the live of my desire... Thanks
[email protected] said:
Allright everybody - It works! Feels like birthday @ christmas together, including a final blowjob and a cold beer togeter
What did I do? I´ve created a new goldcard on a second desire, used this card and started the final RUU again - That was all... Little think, big Impression
I thought all the time, the goldcard was specific for the telephone, but it was specially for the memory card.
Thanks a lot for all of your help! I know, there were many help for this stupid guy
But you all have saved the live of my desire... Thanks
Click to expand...
Click to collapse
I'm glad for you. This is how you learn, stupidity has nothing to do with it.
paul.c said:
I'm glad for you. This is how you learn, stupidity has nothing to do with it.
Click to expand...
Click to collapse
Yes, you´re right... I´ve tryes a lot, I´ve learned even more tonight...
OK, second shot - I´m going to root & s-off my phone again...
[email protected] said:
Yes, you´re right... I´ve tryes a lot, I´ve learned even more tonight...
OK, second shot - I´m going to root & s-off my phone again...
Click to expand...
Click to collapse
Don't forget your glodcard. Keep it safe.
so heres my story.
my brother got water on my HTC desire. it was enough to turn the papers red. so when i try to boot it it says cannot find PB99IMG.zip. so now i have created a gold card and done all that . yada yada yada. but my problem lies here. anytime i attempt to load a PB99IMG file, it loads it, but then the farthest i have gotten to was parsing .............[sd zip] all the bootloader and other such showed up below it. but gets stuck there. any other file ive tryed, it usually gets to checking sd and then fails and goes back to main bootloader. could somone recomend a PB99IMG file that will bring my HTC back to the way it was. its on telus i dont see anything on the phone except HTC so i dont think its branded. somone please help me.
More details about your hardware/software please.
not sure what you mean , but i havn't rooted it or anything . so its stock.
Got phone from any provider or just running htc stock? If second one, download ruu here:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.exe
MD5: bae5f3e1bf9f7e2e7d47d5e51254103b
After this, follow this guide:
http://forum.xda-developers.com/showpost.php?p=10509780&postcount=102
its from telus . if that makes a difference.
so i did as told , it gets to parsing and shows all the bootlaoder and radio stuff but does nothing.
sunday bikes said:
its from telus . if that makes a difference.
Click to expand...
Click to collapse
Yes, that makes a difference. You need this one:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151557_signed.exe
thanks for your help its downloading now ill let you know how it turns out
it still does the same thing. i dont get options on whether or not i want to update.
*BUMP* it still sits on parsing and doent ask my to update or anything what else should i do ?
Are your MD5 Hash ok... what is your current ROM and Hboot version.
im really new into this stuff so i dont know if ym md5 hash is ok . but my device is like brand new not rooted or anything just bought it from telus. and hboot is .93.0001
sunday bikes said:
im really new into this stuff so i dont know if ym md5 hash is ok . but my device is like brand new not rooted or anything just bought it from telus. and hboot is .93.0001
Click to expand...
Click to collapse
md5 hash means, you check the md5 sum of the file, to get sure the file is not corrupted. For windows you can this one e.g.:
http://dl.dropbox.com/u/20471345/SUroot/Tools/PC/md5Check.rar
When you use linux, you do not need an extra software. Open command line, navigate to the place where the file you want to check is, and type
Code:
md5sum file.exe
File.exe is just a placeholder, replace it with the name of your file.
MatDrOiD said:
Yes, that makes a difference. You need this one:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151557_signed.exe
Click to expand...
Click to collapse
Can you tell how did you try this.. I hope you didnt put this file on your sd .. this is a RUU file..
Switch off your mobile.. and switch it on by.. Volume down and power.. after that connect USB cable .. and from ur PC run the RUU.exe file.
i ran the RUU and found the rom.zip file in my temp and put that on my sd card.
connect to USB and run the RUU.. it will give you exact error code.
it said it couldnt find the phone ;as if it wasn't connected.
sunday bikes said:
it said it couldnt find the phone ;as if it wasn't connected.
Click to expand...
Click to collapse
Installed all drivers (hboot and htc sync) correctly and uninstalled htc sync?
Sent from Oxygen
by installing drivers does that mean downloading and installing sdk ?
sunday bikes said:
by installing drivers does that mean downloading and installing sdk ?
Click to expand...
Click to collapse
No, I meant what I wrote... use the search and you will understand what I mean.
Hi
I have an HTC Desire running oxygen. I tried downloading the RUU for the stock rom and running it. It partially completed buy then it could no longer be recognised. Is there anyway I can get this back to a stock rom. My SD card broke and I dont have the original backup.
Please help if you can.
Kind Regards
Adam
Bootloader info please as usually.
What RUU did you try flash?
What was the eroor message?
Is the phone branded? etc, etc etc...
I just about managed to instal oxygen and am quite new to all this so apologies if I sound like a noob.
I dont know how to check the bootloader.
I tried RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704
It says "Updating Signature" and then comes up with "ERROR [131]:CUSTOM ER ID ERROR".
The phone is unbranded and came unlocked.
Thanks so much for the reply
Bootloader is 0.93.0001
use a recent ruu and not a jurassic one
try with wwe 2.29.405.5
even if CID error mean probably ur phone is branded..but worth a try with the above ruu
ensure the phone is full charged, and when running the ruu dont pull battery or unplug the cable
if ur phone is working with oxygen now, then there is no need to run the ruu
Hi
Thanks for the reply. The phone is definitely unbranded and unlocked.
Tried that RUU and it doesnt even recognise the phone as an Android device. Tried unplugging an plugging back in and it still doesnt recognise it.
agarciavalino said:
Hi
Thanks for the reply. The phone is definitely unbranded and unlocked.
Tried that RUU and it doesnt even recognise the phone as an Android device. Tried unplugging an plugging back in and it still doesnt recognise it.
Click to expand...
Click to collapse
well its not the ruu that doesn't recognize ur phone..
its ur pc that doesn't recognize it..is it? u can still access the sdcard content from ur computer?
if ur pc does not recognize it (even with the right drivers up and running), then u have an USB brick..search for a guide (if that the case)
My phone shows up as an Android Device and once i have opened that it says My HTC. I dont have an sd card in my phone. When I connect the phone nothing comes up on the device. However it does show on the pc. The other RUU recognised the phone. This one just doesnt seem to want to.
agarciavalino said:
My phone shows up as an Android Device and once i have opened that it says My HTC. I dont have an sd card in my phone. When I connect the phone nothing comes up on the device. However it does show on the pc. The other RUU recognised the phone. This one just doesnt seem to want to.
Click to expand...
Click to collapse
thats strange..reboot the phone..reboot the pc..already tried? ensure is not a corrupted ruu download..
I have downloaded the most recent RUU again and it made no difference. I have rebooted each device many times. I know. I worry that I have screwed the phone. I dont understand why the first one fails at the signature stage. If i could at least make that work I could do the OTA updates
Do you have the drivers installed (worth a shot).
Also boot into fastboot mode -
1. Power off device
2. Boot into bootloader (holding Power + Vol Down)
3. Choose fastboot
If your USB is ok, then the fastboot line should change to fastboot usb.
Then run the RUU.
Just tried the rom before (RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed). Recognised the phone, started running and failed again on the Updating signature part.
agarciavalino said:
Just tried the rom before (RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed). Recognised the phone, started running and failed again on the Updating signature part.
Click to expand...
Click to collapse
CID error? then ur phone is branded i think
Tried your steps and the phone did change to fastboot USB. It started running fine and then failed on the updating signature part. I also do have the drivers installed.
Also I dont know if clockword is affecting it either. Absolutely nothing when I tried and dind similar situations to me.
What was the exact error(With Number)? CID? As andQlimax says?
Wait, you have clockworkmod working and running?
The exact error i have is "ERROR [131]:CUSTOMER ID ERROR".
Also I can go into recovery and it takes me to clockworkmod recovery v2.5.0.7
Well CID error definitely states you have a branded phone and you need a different RUU.
However, if you have a working clockworkmod recovery why don't you flash a custom ROM?
agarciavalino said:
The exact error i have is "ERROR [131]:CUSTOMER ID ERROR".
Click to expand...
Click to collapse
ur phone is branded..u need the correct ruu by ur operator
agarciavalino said:
Also I can go into recovery and it takes me to clockworkmod recovery v2.5.0.7
Click to expand...
Click to collapse
if ur clockworkmod works, and ur oxygen rom works too..why u need an ruu?
I have got oxygen working well again. Thing is I am selling it as have just got a SGS2. I thought it would be better to sell it with the stock rom. Now it working again on oxygen how should I go about getting it back to stock. As though I was trying for the first time. Thanks for all your helps guys.
PS I have used this phone on O2, Orange and Vodafone. Also there is no branding on the device. The packaging is also unbranded. Its an SLCD version. Dont know if that makes a difference
I was trying to Hboot different table and some radio and I accidently brick my phone.
When I try to turn it on it just vibrates for a second and nothing shows up just blank black screen. Help ME Please !
I have managed to show the info in the fastboot commander. I can flash radio h-boot spl and recovery here. I can shut down phone from this software and it shows charging light as well.
But still blank on boot. Can any body help me to make it usable
Sorry to say, but I think you bricked it. You can't flash GSM radios and partition tables to the CDMA Desire.
Is there any way that I can unbrick it ?
Shabihbhai said:
Is there any way that I can unbrick it ?
Click to expand...
Click to collapse
Hmm... i dont know when its CDMA.but i think this may fix it. Okay you need to download fastboot commander from here: http://forum.xda-developers.com/showthread.php?t=1193915
then you need to download official htc desire RUU it may work for CDMA too (i think) http://forum.xda-developers.com/showthread.php?t=1193915 download the "HTC Desire Android 2.3 Upgrade"
Allright now you got the downloads. You also need Java and the HTC driver if you dont got that. Pull battery out of your phone and set it back again. Connect your phone to your pc (dont turn it on you shold just hear that sound when windows found your device) open fastboot commander program on your pc and go to the tab "boot, sys and userdata" mark all the stuff you can and press remove or something like that
Your phone is only a black screen when you turn it on, dont worry. Open the RUU program now and follow the instructions to revert to android 2.3. I hope that helpe if not let me know what didnt worked and i may help you a little more.
Shabihbhai said:
Is there any way that I can unbrick it ?
Click to expand...
Click to collapse
Not if its really bricked, such as a radio brick, which you more than likely have.
You can try flashign a CDMA RUU like suggested above, but keep your fingers crossed.
I'm pretty sure even flashing a different SPL from alpharev would've done a great job of bricking it...
Yes it probably would
Sent from my HTC Desire using xda premium
Before doing anything that u guyz have suggested would this thing help that i got? This is RUU_Bravo_C_Froyo_USCC_WWE_2.11.573.5_Radio_2.15.00.11.16_release_168495_signed.exe which is sized 171mb. I dounloaded it. What is this thing anyway. Could anyone explain ?
I got it from http://forum.xda-developers.com/showthread.php?t=947961
its an RUU (Rom Upgrade Utility) to upgrade the rom.
What was a guy who doesnt know what an RUU is, doing flashing Hboots?
will u tell me if it has to do anything to make my phone work ?
Like we said earlier, you can try. We can't tell you if it will work o not as your phone may be bricked. However, it should give you failure codes, which may give us more information.
Theres no harm in trying. It probably is bricked anyway.
Good thing about Alpharev hboot is that they lock it so that one doesnt accidentally flash a wrong hboot.. See if you can get into hboot mode (Vol- Power)...If it's still black, use the PB99IMG.zip method of flashing RUUs.. I wont elaborate. They are a dozen threads on it do/
Don't flash an ruu now.
I'm not sure how to fix your problem but I don't believe it's bricked. It is sooo hard to brick these things. I have thought a million times that mine was bricked, just be patient search forums (not just xda) and read a lot. That's the beautiful thing about the internet. You are bound to find many people that have gone through what you are and have fixed it. I will look a little for you but i'm not on that much so I don't know how much help that can be. If your search doesn't provide useful information try changing your keywords. I'll post again later tonight with what I have found if you haven't figured it out already. Good luck.
This RUU is giving me error 110 Cant open file when it is on 60-70 %. I downloaded it forn HTC support the other time and againg the same error. Then I tried to do another RUU from alltel but this gave me error that this was not supported. Help !
Did you flash RUU via computer or via SD card?
SwiftKeyed from dGB with Transparent XDA App
Was your HBOOT previous S-OFF?
MatDrOiD said:
Did you flash RUU via computer or via SD card?
SwiftKeyed from dGB with Transparent XDA App
Click to expand...
Click to collapse
Through PC
heavymetalmage said:
Was your HBOOT previous S-OFF?
Click to expand...
Click to collapse
1.06 it was S-OFF
jclare85 said:
I'm not sure how to fix your problem but I don't believe it's bricked. It is sooo hard to brick these things.
Click to expand...
Click to collapse
Unfortunately the OP has done 2 things which are both known to definitely brick his phone....
OP, I'm not holding out much hope for you...