Develop Bugs

Flashing CM9 freezes mid install

So I have been trying to flash CM9 for the past couple of days, at first it worked just fine but I forgot google apps, so I went back to recovery and flashed gapps. After that it wouldn't leave the boot screen. I used odin to put a stock ICS rom on, then flashed clockwork and now every time I try to install cm9 It just stops on "installing." Did I miss something very simple and obvious or what?

How long are you letting it sit on "install"?

I've tried several time's usually only a few minutes, but at one point I left to the store and came back like an hour later and it was still on installing. Had to pull the battery every time, then I have to use odin because I can't get into recovery.

marksman34 said:
So I have been trying to flash CM9 for the past couple of days, at first it worked just fine but I forgot google apps, so I went back to recovery and flashed gapps. After that it wouldn't leave the boot screen. I used odin to put a stock ICS rom on, then flashed clockwork and now every time I try to install cm9 It just stops on "installing." Did I miss something very simple and obvious or what?
Click to expand...
Click to collapse
You need to follow the instructions to the letter .... and when you get it flashed if it don't boot go back into stock recovery and wipe data and it should boot
Sent from my SPH-D710 using xda premium

OK, I'm going through it again, but I did forget to mention one thing that might be important. After I odin CWM, my current rom does not boot though I can boot to cwm. Is that expected?

marksman34 said:
OK, I'm going through it again, but I did forget to mention one thing that might be important. After I odin CWM, my current rom does not boot though I can boot to cwm. Is that expected?
Click to expand...
Click to collapse
The directions say go back and flash cm7 are you trying to go from ics to cm9 ? If so your risking a brick be safe
Sent from my SPH-D710 using xda premium

Oh damn, there is a CM7? I can't find that one at all. Any help on that would be appreciated. However I did just get past the install so maybe it will work(hopefully without creating a brick).
EDIT: It booted seems to be working well. I would like a cm7 link if any one has it though, just in case

marksman34 said:
Oh damn, there is a CM7? I can't find that one at all. Any help on that would be appreciated. However I did just get past the install so maybe it will work(hopefully without creating a brick).
EDIT: It booted seems to be working well. I would like a cm7 link if any one has it though, just in case
Click to expand...
Click to collapse
all cm7 links i can find right now are down or dead slow..

marksman34 said:
Oh damn, there is a CM7? I can't find that one at all. Any help on that would be appreciated. However I did just get past the install so maybe it will work(hopefully without creating a brick).
EDIT: It booted seems to be working well. I would like a cm7 link if any one has it though, just in case
Click to expand...
Click to collapse
You can use miui 2.3 from tcp its the same kernel in cm7
Sent from my SPH-D710 using xda premium

Bootlooping... Help

I was on CM9 alpha 1 with the stock kernel
I tried to revert back to EL29 (via Odin) so that I could flash the new alpha 2
It boot-looped
I tried several different ROM/kernel/modem combos for GB ROMs (all .tar's that I flashed through Odin)
Still bootlooping
What am I missing? I'm pretty sure it's not completely screwed since it still gets to the 4G screen and then reboots
Thanks in advance for the help... and if there's some info that you need to help me just let me know, I'll pretty much be glued to the screen since this phone is my only one and I won't be able to use it till I get this fixed up...

Can you get into recovery mode?

MeWarning said:
Can you get into recovery mode?
Click to expand...
Click to collapse
Yeah, I'm on CWM v5.0.2.7
Can I just flash something from there?
I thought you weren't supposed to flash stuff thru CWM while on an ICS ROM, that's why I used ODIN

Come on folks in XDA-land.. I'm dying here...

Ok... After a few tries I managed to get a backup restored.. So I'm back to an EL29..

blakjak220 said:
Ok... After a few tries I managed to get a backup restored.. So I'm back to an EL29..
Click to expand...
Click to collapse
When you Odin and it boot loops go into stock recovery our cwm if you got it wipe and reboot it will do it every now and then
Sent from my SPH-D710 using Tapatalk 2 Beta-5

Epix4G said:
When you Odin and it boot loops go into stock recovery our cwm if you got it wipe and reboot it will do it every now and then
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Cool, good to know...
And after all that trouble getting to 4.0.2, Lexicomp (which is a medical app) isn't compatible with it yet.. and I have finals coming up in which I have to have that app... so back to GB it is, at least until finals are over.

[Q] Phone loops in Samsung Logo, will not go into recovery!

My phone kept looping on the loading screen, so i pulled the battery and got in CWM. When i did a data wide so i can restore from a saved file the phone got stuck on wiping.
So i pulled the battery and the phone kept on looping the samsung logo and would not go back to CWM, got inside ODIN and tried the stock one click EL29 ODIN method, everything flashes but gets stuck on data.bin. i re-start the process to only be stuck in the same data.bin step. the ODIN one click pro does not stop responding it just gets stuck.
I tried the ODIN method where i load the stock none rooted tar file in pda mode, this method completely passes but when it restarts it goes back to loop mode.
I tried getting into recovery mode but it loops also (Holding Volume up and power)
I am currently trying a different ODIN oneclick TAR file, maybe this will work, i will update when it finishes.
I do not know what to do next, i have flashed all individual files in ODIN also.

http://forum.xda-developers.com/showthread.php?t=1525495
Seriously again and you can't search.......you are bricked.....
http://forum.xda-developers.com/showthread.php?t=1504808
And you were using a ics kernel with cwm huh ?
Sent from my SPH-D710 using Tapatalk 2

I did search all over xda and androidcentral, i was in ics 4.0.4. Thanks for the links i left the phone flashing, when i get home i will read those threads. If it all fails ill just go to sprint tech bench and get a refurbish replament.

You were on a ics ROM ?
Used a ics kernel to wipe data ?
Were using ROM manager?
Using touch cwm ?
Didn't read OP for the ROM either ?
Almost all ics roms will tell you not to use a ics kernel with cwm that is the cause of the bricks ...
If you can answer yes to any of the above you didn't read enough... There are a dozen threads about bricking phones on here that would have saved your phone....good luck at sprint getting it replaced
Sent from my SPH-D710 using Tapatalk 2

mrperez816 said:
I did search all over xda and androidcentral, i was in ics 4.0.4. Thanks for the links i left the phone flashing, when i get home i will read those threads. If it all fails ill just go to sprint tech bench and get a refurbish replament.
Click to expand...
Click to collapse
What were u using to flash ? The OP of every aosp ROM Wether cm9 codename aokp all say to flash the el26 cwm kernel and flash from there and if going back to GB to use a stock tar and then go from there ...
Sent from my SPH-D710 using Tapatalk 2

i had CWM, i was running ics 4.0.4 fine build 30 since it came out. It just started the stupid animation loop and thats when i decided to do a data wipe in CWM. but then i did the ODIN One Click and it gets stuck on data.bin.
I work for Sprint....
This is my first time ever posting on any forums and i have been flashing since the EVO came out, i have flashed ICS to the EVO 4G and back to GB with no issues, this phone is the first to give me such issues.

mrperez816 said:
i had CWM, i was running ics 4.0.4 fine build 30 since it came out. It just started the stupid animation loop and thats when i decided to do a data wipe in CWM. but then i did the ODIN One Click and it gets stuck on data.bin.
I work for Sprint....
This is my first time ever posting on any forums and i have been flashing since the EVO came out, i have flashed ICS to the EVO 4G and back to GB with no issues, this phone is the first to give me such issues.
Click to expand...
Click to collapse
Samsung screwed us by changing some partitions and until we get source to know what they did its best to follow the OP to a T because no one has bricked when using a GB kernel to wipe or flash ....just the ics ones
Yes I had og evo nexus s and 3d ....this one sucks to have to flash the way we do but its the better phone so you do what you have to
Sent from my SPH-D710 using Tapatalk 2

You could have not said it any better lol, i on purpose broke my photon 4g and one of the replacements on the list was the E4GT and got that one sent to me lol, such an amazing phone but issues like this kill me. i did that rouge in odin and it just loops on the android with the box but does not do anything else.
Ill keep trying different things, custom count is at 3 maybe by the time i give up it might be in the 100's because i wont get a replacement till tuesday...

mrperez816 said:
You could have not said it any better lol, i on purpose broke my photon 4g and one of the replacements on the list was the E4GT and got that one sent to me lol, such an amazing phone but issues like this kill me. i did that rouge in odin and it just loops on the android with the box but does not do anything else.
Ill keep trying different things, custom count is at 3 maybe by the time i give up it might be in the 100's because i wont get a replacement till tuesday...
Click to expand...
Click to collapse
The no data tar will completely flash but won't boot on it but you can put it back to stock like that with sfhub el29 no data
Some one in the data thread I gave u did remap the data partition to his Sd card and rigged it .... That could work until you get replaced
Sent from my SPH-D710 using Tapatalk 2

Just odin the el26+cwm kernel and reboot into recovery and wipe and flash like normal. I had the bootloop before snd this worked for me.
EL26+CWM Kernel link: http://db.tt/0QJkleJR
Edit: just read your whole post and it does sound like your bricked. You can try what I stated above, but I don't think it will work.
Sent from my SPH-D710 using Tapatalk 2 Beta-5

mrperez816 said:
i had CWM, i was running ics 4.0.4 fine build 30 since it came out. It just started the stupid animation loop and thats when i decided to do a data wipe in CWM
Click to expand...
Click to collapse
This is where your /data partition got corrupted. The data wipe in ICS-based CWM.
mrperez816 said:
but then i did the ODIN One Click and it gets stuck on data.bin.
Click to expand...
Click to collapse
ODIN OneClick is just serving as the messenger to tell you your /data partition is corrupted. You could have used CWM, ODIN, ODIN OneClick, etc. They would all tell you the same thing. The EMMC memory is actually damaged, it isn't just a partition data problem.
It is unfortunate to have the issue with ICS-based kernels and custom recovery, but that is why all the threads stress using GB-based kernels with custom recovery to do your flashing.
Lesson learned. At least you work for Sprint and can probably get things resolved with less hassle.

Yeah lesson learned. I just did the repair ticket on it and will have one on tuesday.
When the new one comes i will go straight to ICS build 31, and not even mess with anything else.
Its just amazing how we cant figure out a way to format/partition the currupted /data.

mrperez816 said:
Its just amazing how we cant figure out a way to format/partition the currupted /data.
Click to expand...
Click to collapse
It isn't a format issue.
The hardware emmc memory is damaged.
JTAG bitblasting would have overwrote everything if it was fixable. That is failing in this case.
So basically you are asking why we can't reformat a hard drive that crashed and make it work.

You are doing what's right. I had to flash the one click Odin 3 times to get out of a boot loop after trying to restore a GB ROM MD5 from a ICS kernel. Learned the hard way. But if you can get to DL mode, you can usually fix it. After the third time i was able to get into standard Android recovery and do a factory data reset. Then flashed the rom again and it booted right up. I was lucky though. Hope it works out.

PHONE WONT BOOT AFTER USING ALPHA 6 ICS(darchstar)
I was using this rom since it came out and haven't had 1 problem. after just using it normally it froze. did a battery pull and tried to reboot but was stuck on logo with the cm9 animation. so i went to recovery mode i had an error. i tried doing a format and froze. so i did another battery pull and now my phone wont boot into recovery or download mode. all i get is a blue led light. any ideas?

I'd like to think that putting BIGGER red text in the OP's might help but apparently not...
Sent from my SPH-D710 using xda premium

Oops, ignore me
Sent from my SPH-D710 using xda app-developers app

xDarkStarx27 said:
I was using this rom since it came out and haven't had 1 problem. after just using it normally it froze. did a battery pull and tried to reboot but was stuck on logo with the cm9 animation. so i went to recovery mode i had an error. i tried doing a format and froze. so i did another battery pull and now my phone wont boot into recovery or download mode. all i get is a blue led light. any ideas?
Click to expand...
Click to collapse
Your /data partition is dead. Formatting/ wiping from ICS recovery is VERY BAD, it makes bricks.... time to use insurance/TEP... sfhubs post on this page applies to you as well...
Sent from my SPH-D710 using xda app-developers app

Help I think my Note 2 is on it's last leg

so I don't know how it happened
but over the past couple weeks I've had a lot of trouble with my phone
I didn't notice any issues until I flashed Skynote
it started out as just my computer not recognizing it when connected via USB
but problems have escalated further now
for some reason if I try flashing touchwiz roms 1/2 the time TWRP crashes while doing it and if it doesn't it constantly hangs up during flashing(it took me almost 1/2 hour to flash ultimate internation rom last night)
If I get a rom running the phone is constantly hanging when going through the settings menu.. or if an app is installing it will lock up totally for like 5 seconds
I've formatted thru twrp, I wipe the system every time. I've tried countless factory resets
nothing seems to be helping
anyone have any idea what might be going on?

Probably something corrupt or misplaced. Flash stock to using odin. That should fix it

mrevankyle said:
Probably something corrupt or misplaced. Flash stock to using odin. That should fix it
Click to expand...
Click to collapse
+1..... also wipe external SD card
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2

mrevankyle said:
Probably something corrupt or misplaced. Flash stock to using odin. That should fix it
Click to expand...
Click to collapse
Well I'm gonna sound stupid but is there a walk through on how to do that?

viper98 said:
Well I'm gonna sound stupid but is there a walk through on how to do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2275844

mrevankyle said:
http://forum.xda-developers.com/showthread.php?t=2275844
Click to expand...
Click to collapse
thanks I'll try this out and see if it fixes my issues

viper98 said:
so I don't know how it happened
but over the past couple weeks I've had a lot of trouble with my phone
I didn't notice any issues until I flashed Skynote
it started out as just my computer not recognizing it when connected via USB
but problems have escalated further now
for some reason if I try flashing touchwiz roms 1/2 the time TWRP crashes while doing it and if it doesn't it constantly hangs up during flashing(it took me almost 1/2 hour to flash ultimate internation rom last night)
If I get a rom running the phone is constantly hanging when going through the settings menu.. or if an app is installing it will lock up totally for like 5 seconds
I've formatted thru twrp, I wipe the system every time. I've tried countless factory resets
nothing seems to be helping
anyone have any idea what might be going on?
Click to expand...
Click to collapse
I have faced similar issues twice after changing a rom. The only way back to stability was to odin a stock firmware on to the note II and then to re-root, re-install a custom recovery and reflash the rom.
You can use this thread to get the files to odin back to stock: http://forum.xda-developers.com/showthread.php?t=2275844
Give it a try. . . it helped me!

thanks for the help guys
seems to be running well on stock......I'm gonna put it through it's paces for a while before I get my hopes totally up though
I think I'm just gonna keep it like this until we get some 4.2.2 touchwiz roms
hopefully with 4.2.2 coming out in the coming days the wait wont be too long

Dirty devices...
They all need a good cleaning once in a while ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app

viper98 said:
thanks for the help guys
seems to be running well on stock......I'm gonna put it through it's paces for a while before I get my hopes totally up though
I think I'm just gonna keep it like this until we get some 4.2.2 touchwiz roms
hopefully with 4.2.2 coming out in the coming days the wait wont be too long
Click to expand...
Click to collapse
Try CWM recovery, not twrp....I never use twrp, , always hearing issues with people using that recovery method...Some phone's just don't like it..lol
And like Greg stated...most phones need a thorough cleaning every now and then to get the bugs out.

With TWRP its always good to have the latest version... it can really make a difference
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

I prefer using CWM to flash ROMs on my device. I Always had problems flashing zips on my phone using TWRP recovery. It gave me a headache that I had to use the emergency firmware recovery in kies to revert to stock and reset my flash count. Do try flashing in CWM recovery instead and see what's the result.
Sent from my GT-I9505 using xda app-developers app

No CWM on EL29 + EL26 Recoverys

I am having issues booting into CWM EL26 + EL29 Recoveries.
I am able to odin the kernal but it just sticks on the Samsung logo if I try to access CWM.
It used to reboot and either go right into CWM or I would do Volume Up and Power to access.
I am currently on Paradox Rom GB27. I am trying to flash a ROM that needs EL26 or EL29 but cant access.
Any idea why I cannot access?
Also, if I have the charger plugged in (usb to comp), the screen gets stuck on a battery icon like its charging but doesnt move.
(think thats just because the charger is plugged in) BUT it seems that whatever this kernal is doing it the phone it is Freezing it at that first boot point.
I reflashed GB27 so im fine for now but just want to solve this mystery.
Any help appreciated! thanks!!

deviouskind said:
I am having issues booting into CWM EL26 + EL29 Recoveries.
I am able to odin the kernal but it just sticks on the Samsung logo if I try to access CWM.
It used to reboot and either go right into CWM or I would do Volume Up and Power to access.
I am currently on Paradox Rom GB27. I am trying to flash a ROM that needs EL26 or EL29 but cant access.
Any idea why I cannot access?
Also, if I have the charger plugged in (usb to comp), the screen gets stuck on a battery icon like its charging but doesnt move.
(think thats just because the charger is plugged in) BUT it seems that whatever this kernal is doing it the phone it is Freezing it at that first boot point.
I reflashed GB27 so im fine for now but just want to solve this mystery.
Any help appreciated! thanks!!
Click to expand...
Click to collapse
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..

Gil81 said:
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Click to expand...
Click to collapse
I can try mobile odin. I have the full version. I will give it a shot. The thing is
I had those kernals for over a year, always used them, worked fine.
Now all of a sudden they dont. I tried downloading agai , checked md5, everything appears correct.
I will post back the results.

Gil81 said:
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Click to expand...
Click to collapse
No luck with mobile odin. Same thing. Stuck at the White Samsung Logo.
I am out of options. Unless there is another kernel I can try that is similar to el26 + el29.
Its weird how gb27 works fine... I just dont understand that. Could something be broke or misconfigured on my phone to not allow
installing el26 + el29?

deviouskind said:
No luck with mobile odin. Same thing. Stuck at the White Samsung Logo.
I am out of options. Unless there is another kernel I can try that is similar to el26 + el29.
Its weird how gb27 works fine... I just dont understand that. Could something be broke or misconfigured on my phone to not allow
installing el26 + el29?
Click to expand...
Click to collapse
I'm out.. I can't think of anything.. If you've tried new zips of each.. I'll keep looking but the first couple searches I did where not promising..

Gil81 said:
I'm out.. I can't think of anything.. If you've tried new zips of each.. I'll keep looking but the first couple searches I did where not promising..
Click to expand...
Click to collapse
Thanks for your help. I appreciate it. I will stick with Paradox for now.
I wanted to try multi window rom but flashing on gb27 gives force closes and constant reboots.
Is it possible that once im on gb27, I cant go back and flash a gb rom? Ive done it
Before so thats why im stumped. Its like my phone doesnt support it.
I went on rwilco and downloaded multiple files and made sure they were with cwm.
They all do the same thing. Heres one for you... would water damage cause those kernels not to work?
Phones fine besides the kernel issue.
Also is it possible when doing cleanup on my phone and deleting
Old backups cause an issue? I thought to myself... wait I can restore an old rom with
El29! Lol no where to be found, already got rid of them.

deviouskind said:
Thanks for your help. I appreciate it. I will stick with Paradox for now.
I wanted to try multi window rom but flashing on gb27 gives force closes and constant reboots.
Is it possible that once im on gb27, I cant go back and flash a gb rom? Ive done it
Before so thats why im stumped. Its like my phone doesnt support it.
I went on rwilco and downloaded multiple files and made sure they were with cwm.
They all do the same thing. Heres one for you... would water damage cause those kernels not to work?
Phones fine besides the kernel issue.
Also is it possible when doing cleanup on my phone and deleting
Old backups cause an issue? I thought to myself... wait I can restore an old rom with
El29! Lol no where to be found, already got rid of them.
Click to expand...
Click to collapse
I've flashed many ROMs..from GB to JB and back the other way..lol. Never had that problem..you could try to go into recovery and flash the format all x 2.. Then flash the el26 kernel zip..reboot recovery.. I don't know...might work..The format all x 2 will get ya ready for flashing GB/ICS so it might help..once on el26 you can use jb format all x 2 to get ready for the new jb ROM flash.. Just a thought...

Gil81 said:
I've flashed many ROMs..from GB to JB and back the other way..lol. Never had that problem..you could try to go into recovery and flash the format all x 2.. Then flash the el26 kernel zip..reboot recovery.. I don't know...might work..The format all x 2 will get ya ready for flashing GB/ICS so it might help..once on el26 you can use jb format all x 2 to get ready for the new jb ROM flash.. Just a thought...
Click to expand...
Click to collapse
Good thought, I will give that a shot. Ive been manually wiping

deviouskind said:
Good thought, I will give that a shot. Ive been manually wiping
Click to expand...
Click to collapse
Try doing an Odin stock rooted Rom flash on ICS and then working from there using mobile Odin. Sometimes I can't do the pc Odin for those kernels so I use mobile Odin and it works perfect.
If you're trying to flash the new SHOShock Rom by TD then I'm having issues with that too. My phone gets stuck on a boot cycle and if I try to flash a nandroid back up then it gets stuck on the Samsung screen. Only way out of it was flashing a GB27 rooted stock Rom in pc Odin.
Sent from my SPH-D710 using Tapatalk 4

Good call, @FuMMoD.. I had told him about using mobile Odin...And I figured a back to stock ICS rooted then flash the el29 would be the next thing to try..I just hadn't heard from him if the wipe zip had helped.. Good looking out.. Nice to see people trying to help..This is the best forum...in my opinion..

Gil81 said:
Good call, @FuMMoD.. I had told him about using mobile Odin...And I figured a back to stock ICS rooted then flash the el29 would be the next thing to try..I just hadn't heard from him if the wipe zip had helped.. Good looking out.. Nice to see people trying to help..This is the best forum...in my opinion..
Click to expand...
Click to collapse
Just going off from where you left off man. I figured I would put my 2 cents in cause it sure can be a headache sometimes. I noticed when I'm out of luck pc Odin always saves me. I agree this community is great when it comes to helping each other.
Sent from my SPH-D710 using Tapatalk 4

Had a similar issue yesterday. I flashed the el29 recovery without wiping the /preload first, and it would not boot. Booted back into gb27 agat recovery via Odin, wiped the /preload, flashed el29 zip, and a successful boot. Don't know if it is the same issue, but that is my story...
Sent from my SPH-D710 using xda app-developers app

noobtoob said:
Had a similar issue yesterday. I flashed the el29 recovery without wiping the /preload first, and it would not boot. Booted back into gb27 agat recovery via Odin, wiped the /preload, flashed el29 zip, and a successful boot. Don't know if it is the same issue, but that is my story...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
How did you wipe the preload? I'm having issues flashing shostock and that might help me successfully flash it. Thanks!
Sent from my SPH-D710 using Tapatalk 4

First, download the el29 recovery kernel zip located in the rwilco repository.
Next either flash, or already be on the gb27 agat recovery kernel (also can be found in repository).
While in agat recovery, navigate to "mounts and storage"
Select "format /preload" (and whatever else you want to wipe out)
Back out, then "install zip from SD card"
Flash the el29 zip and you should be good to go.
Sent from my SPH-D710 using xda app-developers app