Develop Bugs

[Q] Problems installing kernels

Hey guys. I'm having some issues installing kernels. I'm aware of how to do the process but aside from the CWM kernels and the stock kernel that's installed when you odin back to stock every other kernel I flash results in a boot loop.
Things like ROMS and zips install fine in CWM but as long as the file has a custom kernel I get boot loops.
Anyone have any idea how I can go about fixing this so I can install ROMs on my phone?

Can anyone help? Plz???

Probably because your well on your way to bricking your epic.. kernels are rom specific just cause theres many out there doesnt mean you can flash anyone over any rom..
I wouldnt really play with cwm just yet phones to new... alot people are bricking this device fasst ..I was one of them.
If u wanna play safe use stock rom with zedomaxepicv3 1.6 oc kernel flash that tar in odin after u go back to stock eg30.tar
give development some time ..let others go through trial and error.
Spare your device she will brick trust me.
Sent from my SPH-D710 using XDA Premium App

lojak29 said:
Probably because your well on your way to bricking your epic.. kernels are rom specific just cause theres many out there doesnt mean you can flash anyone over any rom..
I wouldnt really play with cwm just yet phones to new... alot people are bricking this device fasst ..I was one of them.
If u wanna play safe use stock rom with zedomaxepicv3 1.6 oc kernel flash that tar in odin after u go back to stock eg30.tar
give development some time ..let others go through trial and error.
Spare your device she will brick trust me.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Nothing that I'm doing should result in a hard brick with this phone. The issue isn't that I'm flashing different kernels with any random ROM. It's that ROMS don't install properly because of the issue my phone is having with kernels.
I've tried to install Zedomax's latest kernel immediately after going back to the stock eg30 tar before and I wasn't able to do that either. It resulted in me getting a boot loop as well (that had to then again be fixed by flashing the eg30 tar).
It's a weird issue that I don't see others having on the forum and honestly I think it's possible that it might be a small fix such as flashing a particular tar or possibly formatting some area of the phone, but I'm just not sure how to address the issue.

Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App

Flash the tar kernel with odin.. dont use the cwm zip method i bet that does it
Sent from my SPH-D710 using XDA Premium App

Yes samsung is known for that once ur on a kernel made for the device bit its really from a diff phone cause zedomax is a gti9100 kernel i a way u cant flash rom zips over a custom kernel
You can only use rom zips over stock kernel
The only way to flash zips is be on stock rom stock kernel first.
The best method is odin not cwm
Sent from my SPH-D710 using XDA Premium App

lojak29 said:
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
If I do this process in the order you have it here then when I try to install Zedomax's Kernel it hangs at zimage in ODIN and I have to disconnect the USB. The kernel never flashes and it stays on the official Samsung kernel.
This stuff is frustrating

Weird weird... It shouldnt hang anywhere as long as u see yellow com port in odin and you have correct tar put into pda only dont unzip anuthing just put download into winrar choose pda and select the downloaded tar.. When done itl say pass in green
Sent from my SPH-D710 using XDA Premium App

Make sure its the complete prerooted zedomaxepic v3 1.6 kernel no other version and it must be a .tar file not zip . In pda only let it sit sometimes it will fail keep trying but make sure ur on stock rom first..
That kernel willl give u over clocking ..root and cwm recovery all in one
Sent from my SPH-D710 using XDA Premium App

try another usb port, and/or another cable...
and you can just flash the stock repack with CWM to avoid flashing zedo first

lojak29 said:
Weird weird... It shouldnt hang anywhere as long as u see yellow com port in odin and you have correct tar put into pda only dont unzip anuthing just put download into winrar choose pda and select the downloaded tar.. When done itl say pass in green
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I know what to expect in ODIN during a correct flash, I've used it multiple times, but for whatever reason, that particular tar file always end in a hang at zimage.
lojak29 said:
Make sure its the complete prerooted zedomaxepic v3 1.6 kernel no other version and it must be a .tar file not zip . In pda only let it sit sometimes it will fail keep trying but make sure ur on stock rom first..
That kernel willl give u over clocking ..root and cwm recovery all in one
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I have the right file. And I already know how to obtain root and CWM with the few kernels my phone can flash (Which now that I think about it are mostly stock kernels with slight modifications). Overclocking isn't that important to me but overall my main problem is that when I'm in CWM I can't fully install ROMS. They install but do not flash over correctly/completely and cause boot loops. Other zips flash fine.
chris41g said:
try another usb port, and/or another cable...
and you can just flash the stock repack with CWM to avoid flashing zedo first
Click to expand...
Click to collapse
I've tried multiple USB cables, all result in the same thing. I've tried to flash the stock pack with CWM that you're talking about before and that works fine. i was able to root afterwards and everything but once I tried to install a ROM when I'm on that kernel. I get the same thing, boot loops.

are you sure its bootloops and not just taking a long time? because rebuilding the dalvik-cache can take a while and loop the bootanimation..

chris41g said:
are you sure its bootloops and not just taking a long time? because rebuilding the dalvik-cache can take a while and loop the bootanimation..
Click to expand...
Click to collapse
I can't imagine rebuliding the dalvik-cache should take in excess of 10 minutes or more (if it can, correct me). It just hangs at the Samsung Boot Animation that has the yellow triangle with the exclamation mark.
(I've left the phone on for about 15-20 mins before at this screen) I can only then access download mode,nothing else. No recovery and no booting.

Maybe just stay stock for now till development furthers..
Sent from my SPH-D710 using XDA Premium App

lojak29 said:
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I'm not experiencing the boot issues but, I found there is a lot of information out there regarding kernels and rom's. This is good stuff here. By doing this method, will it root the phone? After doing this, I would like to get rid of the yellow triangle. Mostly just annoys me. Is there an easy way to do that?
I see a method chris41g provided for doing it.
http://forum.xda-developers.com/showthread.php?t=1297999
Is it possible to just use that stock tar and then use zedomaxepic v3 1.6oc kernel? Or is it the kernel that causes the triangle?
Sorry for so many questions. I'd like to do this once and do it right the first time. I came from the Bonsai ROM on the Epic 4g. It has been a while since I have had to do this.
Thanks for your time.

taaz69 said:
I'm not experiencing the boot issues but, I found there is a lot of information out there regarding kernels and rom's. This is good stuff here. By doing this method, will it root the phone?
The kernel is pre-rooted so, yes it will root the phone.
Is it possible to just use that stock tar and then use zedomaxepic v3 1.6oc kernel? Or is it the kernel that causes the triangle?
Yes it is the kernel that causes the triangle.
lojak29 said:
Maybe just stay stock for now till development furthers..
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Development furthering itself doesn't necessarily mean I still wont have issues later.
Click to expand...
Click to collapse

Can anyone else help with this issue? I still haven't come across a fix.

Maniaclyrasist said:
Can anyone else help with this issue? I still haven't come across a fix.
Click to expand...
Click to collapse
Have you tried going completely back to stock? It will remove root and cwr. Then try odin chris41g repacked stock pulled kernel with cwr (can't remember if it provides root or not) but you xan always flash the root zip.
Here's back to stock : http://forum.xda-developers.com/showthread.php?t=1282420
Sent from my SPH-D710 using xda premium

Duce HD2 said:
Have you tried going completely back to stock? It will remove root and cwr. Then try odin chris41g repacked stock pulled kernel with cwr (can't remember if it provides root or not) but you xan always flash the root zip.
Here's back to stock : http://forum.xda-developers.com/showthread.php?t=1282420
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've had to go back to stock multiple times. Every time I've tried to flash a ROM it's run into a boot loop and the only way that I can access the phone again is to ODIN back to stock, install one of the few kernels I can that has CWM and restore a backup. The kernel you mentioned in your post is one of the few my phone will take but others like the Lost Kernel and Zedomax's OC ones will send the phone into a boot loop.

How to?: GB to cyan9; cyan9 to GB.

I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA

Always check stickies.
http://forum.xda-developers.com/showthread.php?t=1525495

Nabbu said:
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6

FYI - OP on the CM9 page for the rom the very first post has it notated that for the CM9 install guide which is the link that has been posted above. I commend you on being careful but just so you know this forum has more than enough info in it to ensure you do everything correct and minimize your chances of bricking..
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
http://forum.xda-developers.com/showthread.php?t=1525495
http://forum.xda-developers.com/showthread.php?t=1504808
Just a few links which have helped me stay away from issues to date..

nitro_c4 said:
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us

playya said:
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
Click to expand...
Click to collapse
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've searched around and I don't know how to just odin a kernel, so I use sfhubs one-click back to el26 then I use autoroot to install el26 +cwm.
I would like to just odin a kernel and flash from there, but i am unsure of the procedure, do you do this:
phone to download mode and connect to odin, use PDA slot and browse to kernel, hit start or GO or whatever it is, then when it starts to reboot, pwr+vlm up to get into recovery, then get my flash on from there?

I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?

I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..

krook250 said:
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
Click to expand...
Click to collapse
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweet thanks, gonna grab the app and go grab the kernel as well. can't wait!!!
If I just cut my 30 min. flashing time down to 10 mins, that means I can flash 3x more, frick yeah!! Now I just need the new cna to drop so I can flash that girl.

wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!

wase4711 said:
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
Click to expand...
Click to collapse
Yea ur post cleared it up for me, just gets confusing when. Theres multiple methods recommended I was 99% sure I just needed to Odin the kernel only but wanted the clarification before I jumped off that bridge, not too comfortable jumping off a bridge when I'm not sure how deep the water is
Sent from my SPH-D710 using xda premium

well, like the asshole who pushed me in the deep end of the pool when I was 12 and didn't know how to swim told me, "figure it out or else", sometimes you gotta just go for it!!
Actually, I am nervous too when I try something new the first time, but, once you figure out who really knows what they are talking about, its easy to just pm them and ask them how they do it..
You obviously know your stuff man, so you will be an expert with this phone in no time!!

I did this going from Blazer 4.1 to CM9 with out any issues.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!

Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium

Nico^APEX said:
I did this going from Blazer 4.1 to CM9 with out any issues.
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Click to expand...
Click to collapse
yes sir, that is correct!
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
-EViL-KoNCEPTz- said:
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't know how you keep all that **** straight; in my house, we ALL go with one "brand" of product, just to avoid that nightmare!!
If someone doesn't like it, I tell them that they get no tech support from me if they don't go with "the flow"!

Aokp flashing issue

Having the hardest time flashing this. Was running it all weekend till yesterday when I went to update profile (blazer gb). I went flash back and it will not flash I hang up on the sgs 2 screen. I've gone back to stock and re-root did everything I could right and still no go.
Went and did sfhubs el26 odin (which did put the triangle on the start up) and it wouldn't let me complete th flash due to it being the euro model. I don't know. Love this Rom super nice GREAT battery.
Wondering how to get this fixed on my end.
Sent from my SPH-D710 using XDA
Sent from my SPH-D710 using XDA

What do you mean euro model? Can you list out the steps you took?
Sent from my SPH-D710 using Tapatalk

Hopefully you haven't messed your phone up too bad already.
Try getting into download mode and then use odin one click back to el29 and start over!

Sorry I ment the international version (gt9100) not the euro version. My phone works I have blend on here atm.
Alright so while I was on Aokp I
1. Flashed el26 with moblie odin.
2. Backed up Rom
3. Flashed calks wipe all
4. Flashed blazer 4.1
5. Updated profile.
6. Flashed el26 with mobile odin
Alright so here is where I was rushing.
7. Restored backup
8. Flashed fe16 repack
9. Boot.
So hindsight being the birch lover it is I should have done some wiping before step 7 and after step 7.
ROM wouldn't boot. I was able to get to download mode no and flashed stock el29 with pc odin. Phone still wouldn't boot. At this point I'm kinda getting worried I did something really dumb. Went into the stock recovery and wiped data and cache. Stock booted fine after that.
I root using one click and got my mobile odin on. Flashed el26 wiped everything tried to restore and wiped again and flashed kernel and wiped again. Wouldn't boot.
Did all the above again using pc odin el26 which gave me the triangle on boot up screen no bigger to me just butt ugly. Went into el26 recovery and tried to flash Rom fresh and still would go past boot up screen.
So I'm back on gb wanting silk back on my phone. Just don't know what to do next.
Sent from my SPH-D710 using XDA

i think step 8 is where you messed up. I believe thats a TouchWiz only kernel. You need an AOKP specific kernel to boot AOKP

Yeah I'm pretty sure that you're right. Got home where I had access to normal Odin just in case. Did everything twice. Manual wiped twice, calks format script twice flashed twice wiped again twice and bada Bing pow. Dopest from I've ever use is back up and rolling.
One question I have is how do I restore a back up. I understand it can only be done with el26 kernel but I guess I'm not clear on the process I guess.
Sent from my SPH-D710 using XDA

Gibsonusa said:
Having the hardest time flashing this. Was running it all weekend till yesterday when I went to update profile (blazer gb). I went flash back and it will not flash I hang up on the sgs 2 screen. I've gone back to stock and re-root did everything I could right and still no go.
Went and did sfhubs el26 odin (which did put the triangle on the start up) and it wouldn't let me complete th flash due to it being the euro model. I don't know. Love this Rom super nice GREAT battery.
Wondering how to get this fixed on my end.
Sent from my SPH-D710 using XDA
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Are you really flashing the roms from here then? The I-9100 is a GSM phone and quite frankly the actual I-9100 forum has a much bigger variety and those are the roms you should be using. Not any of the ones from here since this is a CDMA device.

Gibsonusa said:
Yeah I'm pretty sure that you're right. Got home where I had access to normal Odin just in case. Did everything twice. Manual wiped twice, calks format script twice flashed twice wiped again twice and bada Bing pow. Dopest from I've ever use is back up and rolling.
One question I have is how do I restore a back up. I understand it can only be done with el26 kernel but I guess I'm not clear on the process I guess.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
quite simple actually. Just odin/mobile odin the el26 kernel/recovery. Restore the backup, then flash an AOKP kernel. reboot and you're set.

In an el26 recovery, flash aokp twice. The first flash doesn't do it all the way. Then flash gapps.

im0rtalz said:
Are you really flashing the roms from here then? The I-9100 is a GSM phone and quite frankly the actual I-9100 forum has a much bigger variety and those are the roms you should be using. Not any of the ones from here since this is a CDMA device.
Click to expand...
Click to collapse
No I have an epic 4g touch, but when you flash el26 kernel threw PC Odin it gives you the yellow triangle. I bought a USB jig on amazon for like five bucks that will be here on Friday and it will get rid of that stupid yellow triangle and reset my Odin count too.
Sent from my SPH-D710 using XDA

Problem Flashing Roms

I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?

.HaVoC. said:
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
Click to expand...
Click to collapse
Silly question, and not assuming, did you use autoroot for cwm?
May want to Odin to el26 and autoroot cwm ans try it that way.
I personally Odin back to el29, autoroot, and (knock on wood) never had an issue.
Sent from my SPH-D710 using XDA

.HaVoC. said:
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
Click to expand...
Click to collapse
Usually that happens on a bad download. Did you download them on your phone or PC?

It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?

.HaVoC. said:
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
Click to expand...
Click to collapse
Check you baseband in settings>about phone. If it says unknown then just flash a modem of your choice. This has happen to me. On several occasions.
Sent from my SPH-D710 using xda premium

.HaVoC. said:
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
Click to expand...
Click to collapse
Cool that ya got to flash from though!
Sorry, I don't use CM9.
I can try on my other e4gt later and test though.
Sent from my SPH-D710 using XDA

krazy_smokezalot said:
Check you baseband in settings>about phone. If it says unknown then just flash a modem of your choice. This has happen to me. On several occasions.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?

.HaVoC. said:
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
Click to expand...
Click to collapse
No its ok to have an older modem and be running ICS. They can be "mismatched."

slick_rick said:
No its ok to have an older modem and be running ICS. They can be "mismatched."
Click to expand...
Click to collapse
And I have found, in the boonies that I'm in, el29 modem works the best for me on any ics builds..
Sent from my SPH-D710 using XDA

.HaVoC. said:
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
Click to expand...
Click to collapse
Did u get it to work yet?? Try to Odin stock gb el29 rom. And start from scratch...
Sent from my SPH-D710 using xda premium

krazy_smokezalot said:
Did u get it to work yet?? Try to Odin stock gb el29 rom. And start from scratch...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I started from scratch and followed all the steps until I ended up in the same boat. AOKP Build 38 working perfectly EXCEPT data. I tried the EL29 and FE10 kernels but neither made a difference.

.HaVoC. said:
I started from scratch and followed all the steps until I ended up in the same boat. AOKP Build 38 working perfectly EXCEPT data. I tried the EL29 and FE10 kernels but neither made a difference.
Click to expand...
Click to collapse
Try going back to gingerbread and flashing the EL26 kernal. Then flash the ICS rom you want through that recovery.

AOKP and CM9 have problems with data. every time you or system turn off screen say goodbye to data until 1.enable disable airplane mode or 2.reboot that's the main reason I stay away from these awesome roms until source arrives.
These roms are the best. IMO
1.odin back to stock el29 full reset oc
2.boot update profile and prl
3.copy the rom files to sd
4.turnitoff it off
4.enter download mode and flash el26+cmw for AOKP or el29+cwm direct boot for CM9
5.clear cache, factory data reset, clear dalvik on advance menu
6.go back and select install zip from sd card and choose the rom and flash it
7.flash gapps if apply
8.go back and select reboot system
9.enjoy these awesome roms.
Sent from my SPH-L710 using Tapatalk 2

I think I FINALLY got it to work. I started stock with rooted EL29 Odin-OC, flashed the "StockCWM-EL26.tar.m5d" in Odin, flashed the AOKP build 37 rom, flashed gapps, then flashed the FE16 kernel AND modem. When I rebooted the data was working.

Not that I am advocating this, and I am far from an expert, but I odin flash a stock rooted rom (SPH-D710.FC22_CL287574_ROOTED-oc-sfx) without going back to el29 just to have a nice clean stock rom to flash over with something else (like FIFO2). I just try to make sure I do everything in the same session so I don't get stuck in a stock recovery.
My order when flashing (non-Odin):
calkulin's format all
Modem (sometimes...if newer is available)
Rom
Kernel (with a custom recovery; sometimes the roms come with a stock recovery so if you reboot before installing a custom one, you'll have to either use odin to flash a custom recovery or mobile Odin)
any additional items that the rom didn't include (like gapps, etc.)
reboot
---------- Post added at 02:09 AM ---------- Previous post was at 01:58 AM ----------
Another thing to keep in mind is that AOKP was ported to the E4GT. That could cause issues depending on what you're coming from. Make sure to read all the instructions from the dev before flashing. If the worst happens, buy insurance on your phone and smash it...That's what I did with my evo when I bricked it.

on vacation with no computer, stuck in stock ics recovery

Do we have any ota/signed zips that can be flashed from stock ics asr that arent dependent on el29?
On vacation so no computer, hotel desktop is locked down so cant install samsung driver for a OC.
(on the wife's 4gt)

Unlocked ics recovery? I would say download agats re packed kernel/recovery and his latest rom.
Flash recovey.
Reboot recovery.
Flash rom.
Enjoy
Sent from my SPH-D710 using Tapatalk 2

Why not try mobile Odin?
Edit: your stuck in stock recovery? Will it boot at all? What did you flash previously?
Sent from my SPH-D710 using XDA

All i have is stock recovery and no working android install.
El29toFf02 signed zip gives me the android laying down red ! error as there's no el29 to upgrade.
No way to flash tar/mobile odin.

I know when everyone thought we were gonna get OTA (like FF02 or something), there was a fully prepared OTA file that you could flash through stock recovery.
I dunno where it is now but I saw it in the ICS leaks thread.

I installed FF11-deodexed.zip from el29+cwm, but didnt take for some reason.

pbassjunk said:
All i have is stock recovery and no working android install.
El29toFf02 signed zip gives me the android laying down red ! error as there's no el29 to upgrade.
No way to flash tar/mobile odin.
Click to expand...
Click to collapse
If your on a GB rom, you can mobile odin a EL26 kernel to be able to flash whatever rom you want. What rom are you on right now and what are you trying to fully do?

No rom, just sits on samsung logo. Odin mode and ics recovery both work tho.
There's a best buy I'll try tomorrow, see if theyll let me fix this thing.

Find a best buy and download an Odin room with Odin to one of their laptops and flash it. Act like your shopping. I got away with out once when i soft bricked my og epic lol. Good luck
Sent from my SPH-D710 using xda premium

http://forum.xda-developers.com/showthread.php?t=1703980

Must be sux to be you

you're on vacation with your wife and you're still on xda trying to flash a phone when you could be having sex. enjoy being single after vacation.

Dang, if i was going vacation, i would've flashed back to el29 before going just for stability reasons and want everything to be working. I rather not worry about my phone and rather enjoy everything else.
Sent from my SPH-D710 using Tapatalk 2

pbassjunk said:
Do we have any ota/signed zips that can be flashed from stock ics asr that arent dependent on el29?
On vacation so no computer, hotel desktop is locked down so cant install samsung driver for a OC.
(on the wife's 4gt)
Click to expand...
Click to collapse
I feel for ya! The same thing happened to me at work the other day. No admin permissions for me so I couldn't install drivers any drivers including the USB so I couldn't even transfer anything to the internal storage even if there was a ROM that would flash from stock recovery. Had to do a 12 hour shift without my phone and it drove me crazy!
I'm gonna keep an eye on this thread in case someone offers a solution to this!!

Ur on vacation do thar when u get home
Sent from my SPH-D710 using XDA

Do you have unsecure recovery? (Can flash anything)

I guess I've been lucky, but I've never had to flash back to el29 to flash a diffrent rom. I've ususally been able to flash from whatever custom recovery came with whatever kernel I was using. For example, I used a Rogue recovery to flash a newer agate repacked kernel and then flash a different rom in the same session. The key maybe to flash everything in the same session before reboot so you don't get stuck in a stock recovery...I do use Calkulin's format all before flashing my junk around though...lol
---------- Post added at 01:33 AM ---------- Previous post was at 01:26 AM ----------
sol_671 said:
Dang, if i was going vacation, i would've flashed back to el29 before going just for stability reasons and want everything to be working. I rather not worry about my phone and rather enjoy everything else.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
That's why I always make sure to keep the last (sometimes 2) stable backup on my sd card so I can flash back to it if I need to in an emergency.

Umm I would still want my phone because I dontvl even use my actual camera anymore I just use my phone camera. See if you can borrow someones laptop at a coffee shop, give them like $20 or something to dl Odin and drivers lol.
Sent from my SPH-D710 using xda premium

Got it fixed.. thanks all!
(vacation, but with 2 kids.. so a big meh on all of the crazy monkey-style sex)