Hey guys. I'm having some issues installing kernels. I'm aware of how to do the process but aside from the CWM kernels and the stock kernel that's installed when you odin back to stock every other kernel I flash results in a boot loop.
Things like ROMS and zips install fine in CWM but as long as the file has a custom kernel I get boot loops.
Anyone have any idea how I can go about fixing this so I can install ROMs on my phone?
Can anyone help? Plz???
Probably because your well on your way to bricking your epic.. kernels are rom specific just cause theres many out there doesnt mean you can flash anyone over any rom..
I wouldnt really play with cwm just yet phones to new... alot people are bricking this device fasst ..I was one of them.
If u wanna play safe use stock rom with zedomaxepicv3 1.6 oc kernel flash that tar in odin after u go back to stock eg30.tar
give development some time ..let others go through trial and error.
Spare your device she will brick trust me.
Sent from my SPH-D710 using XDA Premium App
lojak29 said:
Probably because your well on your way to bricking your epic.. kernels are rom specific just cause theres many out there doesnt mean you can flash anyone over any rom..
I wouldnt really play with cwm just yet phones to new... alot people are bricking this device fasst ..I was one of them.
If u wanna play safe use stock rom with zedomaxepicv3 1.6 oc kernel flash that tar in odin after u go back to stock eg30.tar
give development some time ..let others go through trial and error.
Spare your device she will brick trust me.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Nothing that I'm doing should result in a hard brick with this phone. The issue isn't that I'm flashing different kernels with any random ROM. It's that ROMS don't install properly because of the issue my phone is having with kernels.
I've tried to install Zedomax's latest kernel immediately after going back to the stock eg30 tar before and I wasn't able to do that either. It resulted in me getting a boot loop as well (that had to then again be fixed by flashing the eg30 tar).
It's a weird issue that I don't see others having on the forum and honestly I think it's possible that it might be a small fix such as flashing a particular tar or possibly formatting some area of the phone, but I'm just not sure how to address the issue.
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Flash the tar kernel with odin.. dont use the cwm zip method i bet that does it
Sent from my SPH-D710 using XDA Premium App
Yes samsung is known for that once ur on a kernel made for the device bit its really from a diff phone cause zedomax is a gti9100 kernel i a way u cant flash rom zips over a custom kernel
You can only use rom zips over stock kernel
The only way to flash zips is be on stock rom stock kernel first.
The best method is odin not cwm
Sent from my SPH-D710 using XDA Premium App
lojak29 said:
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
If I do this process in the order you have it here then when I try to install Zedomax's Kernel it hangs at zimage in ODIN and I have to disconnect the USB. The kernel never flashes and it stays on the official Samsung kernel.
This stuff is frustrating
Weird weird... It shouldnt hang anywhere as long as u see yellow com port in odin and you have correct tar put into pda only dont unzip anuthing just put download into winrar choose pda and select the downloaded tar.. When done itl say pass in green
Sent from my SPH-D710 using XDA Premium App
Make sure its the complete prerooted zedomaxepic v3 1.6 kernel no other version and it must be a .tar file not zip . In pda only let it sit sometimes it will fail keep trying but make sure ur on stock rom first..
That kernel willl give u over clocking ..root and cwm recovery all in one
Sent from my SPH-D710 using XDA Premium App
try another usb port, and/or another cable...
and you can just flash the stock repack with CWM to avoid flashing zedo first
lojak29 said:
Weird weird... It shouldnt hang anywhere as long as u see yellow com port in odin and you have correct tar put into pda only dont unzip anuthing just put download into winrar choose pda and select the downloaded tar.. When done itl say pass in green
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I know what to expect in ODIN during a correct flash, I've used it multiple times, but for whatever reason, that particular tar file always end in a hang at zimage.
lojak29 said:
Make sure its the complete prerooted zedomaxepic v3 1.6 kernel no other version and it must be a .tar file not zip . In pda only let it sit sometimes it will fail keep trying but make sure ur on stock rom first..
That kernel willl give u over clocking ..root and cwm recovery all in one
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I have the right file. And I already know how to obtain root and CWM with the few kernels my phone can flash (Which now that I think about it are mostly stock kernels with slight modifications). Overclocking isn't that important to me but overall my main problem is that when I'm in CWM I can't fully install ROMS. They install but do not flash over correctly/completely and cause boot loops. Other zips flash fine.
chris41g said:
try another usb port, and/or another cable...
and you can just flash the stock repack with CWM to avoid flashing zedo first
Click to expand...
Click to collapse
I've tried multiple USB cables, all result in the same thing. I've tried to flash the stock pack with CWM that you're talking about before and that works fine. i was able to root afterwards and everything but once I tried to install a ROM when I'm on that kernel. I get the same thing, boot loops.
are you sure its bootloops and not just taking a long time? because rebuilding the dalvik-cache can take a while and loop the bootanimation..
chris41g said:
are you sure its bootloops and not just taking a long time? because rebuilding the dalvik-cache can take a while and loop the bootanimation..
Click to expand...
Click to collapse
I can't imagine rebuliding the dalvik-cache should take in excess of 10 minutes or more (if it can, correct me). It just hangs at the Samsung Boot Animation that has the yellow triangle with the exclamation mark.
(I've left the phone on for about 15-20 mins before at this screen) I can only then access download mode,nothing else. No recovery and no booting.
Maybe just stay stock for now till development furthers..
Sent from my SPH-D710 using XDA Premium App
lojak29 said:
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I'm not experiencing the boot issues but, I found there is a lot of information out there regarding kernels and rom's. This is good stuff here. By doing this method, will it root the phone? After doing this, I would like to get rid of the yellow triangle. Mostly just annoys me. Is there an easy way to do that?
I see a method chris41g provided for doing it.
http://forum.xda-developers.com/showthread.php?t=1297999
Is it possible to just use that stock tar and then use zedomaxepic v3 1.6oc kernel? Or is it the kernel that causes the triangle?
Sorry for so many questions. I'd like to do this once and do it right the first time. I came from the Bonsai ROM on the Epic 4g. It has been a while since I have had to do this.
Thanks for your time.
taaz69 said:
I'm not experiencing the boot issues but, I found there is a lot of information out there regarding kernels and rom's. This is good stuff here. By doing this method, will it root the phone?
The kernel is pre-rooted so, yes it will root the phone.
Is it possible to just use that stock tar and then use zedomaxepic v3 1.6oc kernel? Or is it the kernel that causes the triangle?
Yes it is the kernel that causes the triangle.
lojak29 said:
Maybe just stay stock for now till development furthers..
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Development furthering itself doesn't necessarily mean I still wont have issues later.
Click to expand...
Click to collapse
Can anyone else help with this issue? I still haven't come across a fix.
Maniaclyrasist said:
Can anyone else help with this issue? I still haven't come across a fix.
Click to expand...
Click to collapse
Have you tried going completely back to stock? It will remove root and cwr. Then try odin chris41g repacked stock pulled kernel with cwr (can't remember if it provides root or not) but you xan always flash the root zip.
Here's back to stock : http://forum.xda-developers.com/showthread.php?t=1282420
Sent from my SPH-D710 using xda premium
Duce HD2 said:
Have you tried going completely back to stock? It will remove root and cwr. Then try odin chris41g repacked stock pulled kernel with cwr (can't remember if it provides root or not) but you xan always flash the root zip.
Here's back to stock : http://forum.xda-developers.com/showthread.php?t=1282420
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've had to go back to stock multiple times. Every time I've tried to flash a ROM it's run into a boot loop and the only way that I can access the phone again is to ODIN back to stock, install one of the few kernels I can that has CWM and restore a backup. The kernel you mentioned in your post is one of the few my phone will take but others like the Lost Kernel and Zedomax's OC ones will send the phone into a boot loop.
Related
Big thanks to RoadRAGEN for helping me figure out an ext4 issue! Odin this to get Deodexed stock EG30 with latest root and su binary and Busybox 1.18.4.
This does not wipe data.
I am not responsible for anything that happens to your phone. You do this at your own risk.
I have only tested this with the stock kernel and Bubby's CWM kernel.
Download
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Extract the contents of the zip file to a folder
2. Open odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold v-down + power)
4. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
5. The only box that should be checked is Auto Reboot.
6. You do not need to choose a pit file.
7. In the PDA Section choose the tar file. (Deodexed-Rooted-Busybox-EG30.tar)
8. Hit start. It will do its thing.
9. If it fails than try a new cable.
10. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.
reserved just in case
reserved again
Awesome crawrj. You do great work.
Sent From My Evo Killer!!!
Dumb question..... Will this flash the stock kernel that was released with the phone or is this the stock kernel source that is available from Samsung? Awesome Work sir!
Samsung Galaxy S II
Cannot wait to try, lol
stangdriverdoug said:
Dumb question..... Will this flash the stock kernel that was released with the phone or is this the stock kernel source that is available from Samsung? Awesome Work sir!
Samsung Galaxy S II
Click to expand...
Click to collapse
This does not contain a kernel. This is a stock file system that is rooted with busybox. I have tested on the root kernel and Bubby's CWM kernel. I have not tested on the Zedomax kernel.
Cool thanks!
Samsung Galaxy S II
File is up.
My phone is not rooted. If I flash this I will be rooted with the Kernel that was on the phone out of box? Also if I then flash Clock work recovery will it change the Kernel to the one others are claiming LOS on?
redram38 said:
My phone is not rooted. If I flash this I will be rooted with the Kernel that was on the phone out of box? Also if I then flash Clock work recovery will it change the Kernel to the one others are claiming LOS on?
Click to expand...
Click to collapse
That is correct. It will be just like flashing with the stock kernel which I have done. If you flash CWM it will change the kernel. Whether or not you get the LOS is up in the air. I have been using it for days and haven't had it yet.
Just so I have this straight, this is a stock rom, no kernel, deoxed so once installed I can flash a theme over it.
I flashed buddies kernel with cwm rooted and flashed back to the stock kernel is there anything I need to do with my kernel or can I just flash this rom?
Edit: he beat me to it, must have been typing at the same time.
Sent from my Samsung Epic Touch 4G
skyward01 said:
Just so I have this straight, this is a stock rom, no kernel, deoxed so once installed I can flash a theme over it.
I flashed buddies kernel with cwm rooted and flashed back to the stock kernel is there anything I need to do with my kernel or can I just flash this rom?
Sent from my Samsung Epic Touch 4G
Click to expand...
Click to collapse
That is correct. Just flash and go.
Im on starburst rom with zedomax v3..could i just flash the stock kernel and then flash this on top of starburst?
Awesome work. Does the Odin flash give you CWM as well? Or just SuperUser?
Sent from my Galaxy S II
jayv1717 said:
Im on starburst rom with zedomax v3..could i just flash the stock kernel and then flash this on top of starburst?
Click to expand...
Click to collapse
This will overwrite everything regardless of what setup you are on.
Sent from my SPH-D700 using xda premium
crawrj said:
That is correct. It will be just like flashing with the stock kernel which I have done. If you flash CWM it will change the kernel. Whether or not you get the LOS is up in the air. I have been using it for days and haven't had it yet.
Click to expand...
Click to collapse
Ok...so the only way to have CWM is to change the kernel? I guess rom manager doesn't work for flashing CWM? Sorry if its a stupid question but I have been all over these threads for a week trying to decide which way to root and which way is better.
Dj21o said:
Awesome work. Does the Odin flash give you CWM as well? Or just SuperUser?
Sent from my Galaxy S II
Click to expand...
Click to collapse
That what I was going to ask. You said we could flash a theme over this so I assume CWM is in there as well right?
Sent from my SPH-D700 using xda premium
JohnCorleone said:
This will overwrite everything regardless of what setup you are on.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
thanks bro.. One more question does this wipe internal sd card?
This does not have the kernel. I left it out for people to make their own decision on what kernel to use. Once we get a completely stock kernel with stock CWM I will update it. But for now it is just the system partion.
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Always check stickies.
http://forum.xda-developers.com/showthread.php?t=1525495
Nabbu said:
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
FYI - OP on the CM9 page for the rom the very first post has it notated that for the CM9 install guide which is the link that has been posted above. I commend you on being careful but just so you know this forum has more than enough info in it to ensure you do everything correct and minimize your chances of bricking..
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
http://forum.xda-developers.com/showthread.php?t=1525495
http://forum.xda-developers.com/showthread.php?t=1504808
Just a few links which have helped me stay away from issues to date..
nitro_c4 said:
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
playya said:
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
Click to expand...
Click to collapse
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've searched around and I don't know how to just odin a kernel, so I use sfhubs one-click back to el26 then I use autoroot to install el26 +cwm.
I would like to just odin a kernel and flash from there, but i am unsure of the procedure, do you do this:
phone to download mode and connect to odin, use PDA slot and browse to kernel, hit start or GO or whatever it is, then when it starts to reboot, pwr+vlm up to get into recovery, then get my flash on from there?
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
krook250 said:
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
Click to expand...
Click to collapse
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweet thanks, gonna grab the app and go grab the kernel as well. can't wait!!!
If I just cut my 30 min. flashing time down to 10 mins, that means I can flash 3x more, frick yeah!! Now I just need the new cna to drop so I can flash that girl.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
wase4711 said:
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
Click to expand...
Click to collapse
Yea ur post cleared it up for me, just gets confusing when. Theres multiple methods recommended I was 99% sure I just needed to Odin the kernel only but wanted the clarification before I jumped off that bridge, not too comfortable jumping off a bridge when I'm not sure how deep the water is
Sent from my SPH-D710 using xda premium
well, like the asshole who pushed me in the deep end of the pool when I was 12 and didn't know how to swim told me, "figure it out or else", sometimes you gotta just go for it!!
Actually, I am nervous too when I try something new the first time, but, once you figure out who really knows what they are talking about, its easy to just pm them and ask them how they do it..
You obviously know your stuff man, so you will be an expert with this phone in no time!!
I did this going from Blazer 4.1 to CM9 with out any issues.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Nico^APEX said:
I did this going from Blazer 4.1 to CM9 with out any issues.
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Click to expand...
Click to collapse
yes sir, that is correct!
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
-EViL-KoNCEPTz- said:
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't know how you keep all that **** straight; in my house, we ALL go with one "brand" of product, just to avoid that nightmare!!
If someone doesn't like it, I tell them that they get no tech support from me if they don't go with "the flow"!
When i flash this rom an i try to go into recovery its not there..so when i install it from the e4gtauto it wont boot back into the rom..what do i do..in the e4gtauto what am i suppose to choose
You need to odin a recovery with it baked in. You only need to do this if you are wanting to leave MIUI. For now the kernel that comes bundled in the ROM doesn't have the recovery you want.
Sent from my SPH-D710 using Tapatalk 2
CWM is not included in the rom for your protection. If you need to do any flashing you can use autoroot to flash el26cwm. When it reboots besure to hold the volume up and power keys to get into recovery as flashing the gingerbread kernel will cause your phone not to boot back into the rom since it's an ICS ROM. At the moment using any type of custom recovery in ICS is not recommended thus why the developers have taken it out due to all the bricking issues.
COOL COOL i just like to back up my roms..im on xplod mini 2.0 using rougue_ET-1.4.0-GUNSLINGER and its works an this is a ics rom...just a heads up
Please what ever you do I would avoid to do any wiping or restoring while in an ICS recovery/kernel. Please note also even the the gunslinger thread, its advised not to do any type of flashing *on ICS builds* Backing up might be ok, but nonetheless take your time and try to read as much as possible, there's numerous thread posted by others who have asked a similar question and has been answered.
kingcaliyone said:
When i flash this rom an i try to go into recovery its not there..so when i install it from the e4gtauto it wont boot back into the rom..what do i do..in the e4gtauto what am i suppose to choose
Click to expand...
Click to collapse
Clear cut reason why more reading of threads in xda is.needed. please please please take so.e time and read the brick threads. Also everyone in here has given you some good advice
Sent from my SPH-D710 using Tapatalk
i do read clearly .....if i didn't i wouldn't know how to do this stuff i just wanted to know was there a recovery to use with tha Rom gggeessshhh
Sent from my SPH-D710 using xda premium
you can mobile Odin el26. then reboot right into recovery.
easiest and safest way.
but you will have to reflash a kernel or rom in order to boot back up after you done in recovery.
kingcaliyone said:
i do read clearly .....if i didn't i wouldn't know how to do this stuff i just wanted to know was there a recovery to use with tha Rom gggeessshhh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
"Be sure" when you flash el26 cwm 5.0.2.7 that just after boot, when first Samsung screen appears, start to hold power and volume up.. Otherwise you will have issues.. This is a gingerbread kernel and isn't made to run on ics, but does work as long as you follow those exact instructions.. I always just keep a copy of the el26 cwm tar on my sdcard and use mobile odin to flash it when I leave a rom.... It's fastest way to do this... Here is cwm el26 tar. Use either pc odin 1.85 or mobile odin to flash..
http://db.tt/rIxjBIk8
Sent from my SPH-D710 using Tapatalk 2 Beta-5
kingcaliyone said:
i do read clearly .....if i didn't i wouldn't know how to do this stuff i just wanted to know was there a recovery to use with tha Rom gggeessshhh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Chill..... that's Playya you're talking to
Sent from my SPH-D710 using xda premium
I was on stock rooted fd26 wanted to try new rom so i flashed el26 kernel which i got in this forum it flashed but when it boot it only went to samsung screen with yellow triangle but it said gt-i900 which is att version i think ****!!!! And all i can do is boot into recovery what should i do??? Help please!!!
Sent from my K1 using xda premium
sbeekman said:
I was on stock rooted fd26 wanted to try new rom so i flashed el26 kernel which i got in this forum it flashed but when it boot it only went to samsung screen with yellow triangle but it said gt-i900 which is att version i think ****!!!! And all i can do is boot into recovery what should i do??? Help please!!!
Sent from my K1 using xda premium
Click to expand...
Click to collapse
Which recovery did you use to flash? cwm or android stock?
I used regular odin on pc i didnt have cwm thats what i was trying to get but i have it now lol and thats all i can get into
Sent from my K1 using xda premium
sbeekman said:
I used regular odin on pc i didnt have cwm thats what i was trying to get but i have it now lol and thats all i can get into
Sent from my K1 using xda premium
Click to expand...
Click to collapse
Have you tried to get back into download mode? If you can then I'd suggest using Sfhub's one-click EL29.
Hopefully someone with more knowledge will chime in to help out.
In CWM recovery you can mount the internal or external memory so you can put a different ROM/kernel and flash it right in recovery. But still as Eso said it's best to get into download mode and use Odin
Not sure what you did and how you did it. Need more details. A lot more details. But if you can get to download mode (hold the power button + volume down till the boot screen shows), I'd follow Esoteric68's advice and use the one-click EL29 here http://forum.xda-developers.com/showthread.php?t=1433101 or try the EL26 here http://forum.xda-developers.com/showthread.php?t=1623684. Make sure you use the 'Full Reset' options.
Esoteric68 said:
Have you tried to get back into download mode? If you can then I'd suggest using Sfhub's one-click EL29.
Hopefully someone with more knowledge will chime in to help out.
Click to expand...
Click to collapse
This one. I had the same experience and was able to go DL mode. Download the one-click odin rom from sfhub's thread (having kenel included one) and flash it.
All he did was flash the El26 CWM kernel we all use in ICS to flash from Rom to Rom, he is safe on where he is at.
The reason he gets boot loops is because it's a GB kernel and not an ICS kernel. The GT-I9000 is normal when using this file and happens to everyone right now when they use it.
He can flash a new Rom and such from where he is at, or if he wants to keep his current Rom he has to find an ICS kernel to flash through CWM that he has.
borkan said:
All he did was flash the El26 CWM kernel we all use in ICS to flash from Rom to Rom, he is safe on where he is at.
The reason he gets boot loops is because it's a GB kernel and not an ICS kernel. The GT-I9000 is normal when using this file and happens to everyone right now when they use it.
He can flash a new Rom and such from where he is at, or if he wants to keep his current Rom he has to find an ICS kernel to flash through CWM that he has.
Click to expand...
Click to collapse
Excellent answer.
Sent from my SPH-D710 using XDA
I told you this would happen in our PM conversation yesterday. I told you it would be OK and you would just have to boot into ClockWork Mod recovery from there and flash a ROM/kernel/modem.
I am having issues booting into CWM EL26 + EL29 Recoveries.
I am able to odin the kernal but it just sticks on the Samsung logo if I try to access CWM.
It used to reboot and either go right into CWM or I would do Volume Up and Power to access.
I am currently on Paradox Rom GB27. I am trying to flash a ROM that needs EL26 or EL29 but cant access.
Any idea why I cannot access?
Also, if I have the charger plugged in (usb to comp), the screen gets stuck on a battery icon like its charging but doesnt move.
(think thats just because the charger is plugged in) BUT it seems that whatever this kernal is doing it the phone it is Freezing it at that first boot point.
I reflashed GB27 so im fine for now but just want to solve this mystery.
Any help appreciated! thanks!!
deviouskind said:
I am having issues booting into CWM EL26 + EL29 Recoveries.
I am able to odin the kernal but it just sticks on the Samsung logo if I try to access CWM.
It used to reboot and either go right into CWM or I would do Volume Up and Power to access.
I am currently on Paradox Rom GB27. I am trying to flash a ROM that needs EL26 or EL29 but cant access.
Any idea why I cannot access?
Also, if I have the charger plugged in (usb to comp), the screen gets stuck on a battery icon like its charging but doesnt move.
(think thats just because the charger is plugged in) BUT it seems that whatever this kernal is doing it the phone it is Freezing it at that first boot point.
I reflashed GB27 so im fine for now but just want to solve this mystery.
Any help appreciated! thanks!!
Click to expand...
Click to collapse
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Gil81 said:
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Click to expand...
Click to collapse
I can try mobile odin. I have the full version. I will give it a shot. The thing is
I had those kernals for over a year, always used them, worked fine.
Now all of a sudden they dont. I tried downloading agai , checked md5, everything appears correct.
I will post back the results.
Gil81 said:
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Click to expand...
Click to collapse
No luck with mobile odin. Same thing. Stuck at the White Samsung Logo.
I am out of options. Unless there is another kernel I can try that is similar to el26 + el29.
Its weird how gb27 works fine... I just dont understand that. Could something be broke or misconfigured on my phone to not allow
installing el26 + el29?
deviouskind said:
No luck with mobile odin. Same thing. Stuck at the White Samsung Logo.
I am out of options. Unless there is another kernel I can try that is similar to el26 + el29.
Its weird how gb27 works fine... I just dont understand that. Could something be broke or misconfigured on my phone to not allow
installing el26 + el29?
Click to expand...
Click to collapse
I'm out.. I can't think of anything.. If you've tried new zips of each.. I'll keep looking but the first couple searches I did where not promising..
Gil81 said:
I'm out.. I can't think of anything.. If you've tried new zips of each.. I'll keep looking but the first couple searches I did where not promising..
Click to expand...
Click to collapse
Thanks for your help. I appreciate it. I will stick with Paradox for now.
I wanted to try multi window rom but flashing on gb27 gives force closes and constant reboots.
Is it possible that once im on gb27, I cant go back and flash a gb rom? Ive done it
Before so thats why im stumped. Its like my phone doesnt support it.
I went on rwilco and downloaded multiple files and made sure they were with cwm.
They all do the same thing. Heres one for you... would water damage cause those kernels not to work?
Phones fine besides the kernel issue.
Also is it possible when doing cleanup on my phone and deleting
Old backups cause an issue? I thought to myself... wait I can restore an old rom with
El29! Lol no where to be found, already got rid of them.
deviouskind said:
Thanks for your help. I appreciate it. I will stick with Paradox for now.
I wanted to try multi window rom but flashing on gb27 gives force closes and constant reboots.
Is it possible that once im on gb27, I cant go back and flash a gb rom? Ive done it
Before so thats why im stumped. Its like my phone doesnt support it.
I went on rwilco and downloaded multiple files and made sure they were with cwm.
They all do the same thing. Heres one for you... would water damage cause those kernels not to work?
Phones fine besides the kernel issue.
Also is it possible when doing cleanup on my phone and deleting
Old backups cause an issue? I thought to myself... wait I can restore an old rom with
El29! Lol no where to be found, already got rid of them.
Click to expand...
Click to collapse
I've flashed many ROMs..from GB to JB and back the other way..lol. Never had that problem..you could try to go into recovery and flash the format all x 2.. Then flash the el26 kernel zip..reboot recovery.. I don't know...might work..The format all x 2 will get ya ready for flashing GB/ICS so it might help..once on el26 you can use jb format all x 2 to get ready for the new jb ROM flash.. Just a thought...
Gil81 said:
I've flashed many ROMs..from GB to JB and back the other way..lol. Never had that problem..you could try to go into recovery and flash the format all x 2.. Then flash the el26 kernel zip..reboot recovery.. I don't know...might work..The format all x 2 will get ya ready for flashing GB/ICS so it might help..once on el26 you can use jb format all x 2 to get ready for the new jb ROM flash.. Just a thought...
Click to expand...
Click to collapse
Good thought, I will give that a shot. Ive been manually wiping
deviouskind said:
Good thought, I will give that a shot. Ive been manually wiping
Click to expand...
Click to collapse
Try doing an Odin stock rooted Rom flash on ICS and then working from there using mobile Odin. Sometimes I can't do the pc Odin for those kernels so I use mobile Odin and it works perfect.
If you're trying to flash the new SHOShock Rom by TD then I'm having issues with that too. My phone gets stuck on a boot cycle and if I try to flash a nandroid back up then it gets stuck on the Samsung screen. Only way out of it was flashing a GB27 rooted stock Rom in pc Odin.
Sent from my SPH-D710 using Tapatalk 4
Good call, @FuMMoD.. I had told him about using mobile Odin...And I figured a back to stock ICS rooted then flash the el29 would be the next thing to try..I just hadn't heard from him if the wipe zip had helped.. Good looking out.. Nice to see people trying to help..This is the best forum...in my opinion..
Gil81 said:
Good call, @FuMMoD.. I had told him about using mobile Odin...And I figured a back to stock ICS rooted then flash the el29 would be the next thing to try..I just hadn't heard from him if the wipe zip had helped.. Good looking out.. Nice to see people trying to help..This is the best forum...in my opinion..
Click to expand...
Click to collapse
Just going off from where you left off man. I figured I would put my 2 cents in cause it sure can be a headache sometimes. I noticed when I'm out of luck pc Odin always saves me. I agree this community is great when it comes to helping each other.
Sent from my SPH-D710 using Tapatalk 4
Had a similar issue yesterday. I flashed the el29 recovery without wiping the /preload first, and it would not boot. Booted back into gb27 agat recovery via Odin, wiped the /preload, flashed el29 zip, and a successful boot. Don't know if it is the same issue, but that is my story...
Sent from my SPH-D710 using xda app-developers app
noobtoob said:
Had a similar issue yesterday. I flashed the el29 recovery without wiping the /preload first, and it would not boot. Booted back into gb27 agat recovery via Odin, wiped the /preload, flashed el29 zip, and a successful boot. Don't know if it is the same issue, but that is my story...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
How did you wipe the preload? I'm having issues flashing shostock and that might help me successfully flash it. Thanks!
Sent from my SPH-D710 using Tapatalk 4
First, download the el29 recovery kernel zip located in the rwilco repository.
Next either flash, or already be on the gb27 agat recovery kernel (also can be found in repository).
While in agat recovery, navigate to "mounts and storage"
Select "format /preload" (and whatever else you want to wipe out)
Back out, then "install zip from SD card"
Flash the el29 zip and you should be good to go.
Sent from my SPH-D710 using xda app-developers app