Develop Bugs

How to?: GB to cyan9; cyan9 to GB.

I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA

Always check stickies.
http://forum.xda-developers.com/showthread.php?t=1525495

Nabbu said:
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6

FYI - OP on the CM9 page for the rom the very first post has it notated that for the CM9 install guide which is the link that has been posted above. I commend you on being careful but just so you know this forum has more than enough info in it to ensure you do everything correct and minimize your chances of bricking..
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
http://forum.xda-developers.com/showthread.php?t=1525495
http://forum.xda-developers.com/showthread.php?t=1504808
Just a few links which have helped me stay away from issues to date..

nitro_c4 said:
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us

playya said:
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
Click to expand...
Click to collapse
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've searched around and I don't know how to just odin a kernel, so I use sfhubs one-click back to el26 then I use autoroot to install el26 +cwm.
I would like to just odin a kernel and flash from there, but i am unsure of the procedure, do you do this:
phone to download mode and connect to odin, use PDA slot and browse to kernel, hit start or GO or whatever it is, then when it starts to reboot, pwr+vlm up to get into recovery, then get my flash on from there?

I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?

I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..

krook250 said:
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
Click to expand...
Click to collapse
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweet thanks, gonna grab the app and go grab the kernel as well. can't wait!!!
If I just cut my 30 min. flashing time down to 10 mins, that means I can flash 3x more, frick yeah!! Now I just need the new cna to drop so I can flash that girl.

wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!

wase4711 said:
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
Click to expand...
Click to collapse
Yea ur post cleared it up for me, just gets confusing when. Theres multiple methods recommended I was 99% sure I just needed to Odin the kernel only but wanted the clarification before I jumped off that bridge, not too comfortable jumping off a bridge when I'm not sure how deep the water is
Sent from my SPH-D710 using xda premium

well, like the asshole who pushed me in the deep end of the pool when I was 12 and didn't know how to swim told me, "figure it out or else", sometimes you gotta just go for it!!
Actually, I am nervous too when I try something new the first time, but, once you figure out who really knows what they are talking about, its easy to just pm them and ask them how they do it..
You obviously know your stuff man, so you will be an expert with this phone in no time!!

I did this going from Blazer 4.1 to CM9 with out any issues.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!

Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium

Nico^APEX said:
I did this going from Blazer 4.1 to CM9 with out any issues.
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Click to expand...
Click to collapse
yes sir, that is correct!
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
-EViL-KoNCEPTz- said:
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't know how you keep all that **** straight; in my house, we ALL go with one "brand" of product, just to avoid that nightmare!!
If someone doesn't like it, I tell them that they get no tech support from me if they don't go with "the flow"!

[Q] Frankenstein Ego

I flashed this rom and kept my EL29 kernel. Does that mean in order to get this Rom and get my CWM recovery back I have to reset my phone to stock and start all over again with the EL26? Also, is the swype keyboard in the rapps, and how do i get the face unlock to work?

When you flashed Frankenstein rom, your kernel changed to the FE21 kernel included with the rom so not sure what you mean by you kept el29 kernel since that's not compatible with ICS. The reason you have stock android recovery now is because of all the bricking issues performing certain functions in custom ICS recovery so devs are leaving out custom recovery from their roms. So yes, when you want to change roms, backup, etc., you must go back to the el26 cwm kernel first and flash, backup, etc. from there. Not sure about your last two questions since I'm not using that rom. Let me know if you need anything else.
Sent from my SPH-D710 using Tapatalk

Thanks. I see that the kernel has been switched, but initially I had the Blazer rom with el29. What rom are you running
Sent from my SPH-D710 using XDA

DreamManifested said:
Thanks. I see that the kernel has been switched, but initially I had the Blazer rom with el29. What rom are you running
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I'm running CM9 alpha 4. Its fast, smooth, no problems at all.
Sent from my SPH-D710 using Tapatalk

So all the ics rooms need el26 reboot versus el29
Sent from my SPH-D710 using XDA

DreamManifested said:
So all the ics rooms need el26 reboot versus el29
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Not to sure what you mean by that. If you're saying what I think you're saying, yes you must use el26 cwm kernel whenever flashing anything ICS related or backing up or restoring. Using anything else and you risk bricking your phone.
Sent from my SPH-D710 using Tapatalk

Slick_rick is correct, as far as Swype i just sign up for the Swype beta from you phone browser to get a download for it, that way i always have it to restore with titanium so i can get Swype on any rom. There's also some Swype keyboards floating around in the app section but i haven't tried them. They should work though.
Sent from my SPH-D710 using xda premium

Flashing Help
slick_rick said:
When you flashed Frankenstein rom, your kernel changed to the FE21 kernel included with the rom so not sure what you mean by you kept el29 kernel since that's not compatible with ICS. The reason you have stock android recovery now is because of all the bricking issues performing certain functions in custom ICS recovery so devs are leaving out custom recovery from their roms. So yes, when you want to change roms, backup, etc., you must go back to the el26 cwm kernel first and flash, backup, etc. from there. Not sure about your last two questions since I'm not using that rom. Let me know if you need anything else.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Wow... I needed this thread. I just recently went through what I thought were all the instructions to flash this rom. I had previously used the PD Odin executable routine to upgrade from Gingerbread to ICS. I saw the reviews on this rom and really liked what I saw. I used Odin 1.85 to set up CWM-El26 so I could flash this ROM. I got everything working ( I do get that yellow triangle on reboots) but I did notice the CWMod Recovery does not stay on the phone. It reverts back to the basic ICS Recovery (where I GUESS you cannot flash zip files). Now all this said... After flashing this ROM, I am still on FE16. Is there something else I am missing.
I got into rooting when I had my Dinosaur Moment, and now I have that itch again. Thanks again for all your help!

lambohoos said:
Wow... I needed this thread. I just recently went through what I thought were all the instructions to flash this rom. I had previously used the PD Odin executable routine to upgrade from Gingerbread to ICS. I saw the reviews on this rom and really liked what I saw. I used Odin 1.85 to set up CWM-El26 so I could flash this ROM. I got everything working ( I do get that yellow triangle on reboots) but I did notice the CWMod Recovery does not stay on the phone. It reverts back to the basic ICS Recovery (where I GUESS you cannot flash zip files). Now all this said... After flashing this ROM, I am still on FE16. Is there something else I am missing.
I got into rooting when I had my Dinosaur Moment, and now I have that itch again. Thanks again for all your help!
Click to expand...
Click to collapse
So what's wrong with your setup?
Sent from my SPH-D710 using Tapatalk

I guess I was a bit over the place. I was wondering why it wasn't keeping my CWM recovery instead of the generic one? I can deal with the yellow triangle.
---------- Post added at 04:30 PM ---------- Previous post was at 03:52 PM ----------
DreamManifested said:
" Also, is the swype keyboard in the rapps, and how do i get the face unlock to work?
Click to expand...
Click to collapse
Swype is in the removed apps. You have to Unknown Sources checked under device administration. You can mount your phone, add the swype.apk file to the phone, and install it using the astro file manager. I still go back and forth between swype and the stock ICS keyboard. Word prediction seems to work better in the stock.

lambohoos said:
I guess I was a bit over the place. I was wondering why it wasn't keeping my CWM recovery instead of the generic one? I can deal with the yellow triangle.
---------- Post added at 04:30 PM ---------- Previous post was at 03:52 PM ----------
Swype is in the removed apps. You have to Unknown Sources checked under device administration. You can mount your phone, add the swype.apk file to the phone, and install it using the astro file manager. I still go back and forth between swype and the stock ICS keyboard. Word prediction seems to work better in the stock.
Click to expand...
Click to collapse
Oh well your cwm recovery disappeared because it wasnt packed into the kernel that came with the rom you flashed. And you can get rid of the yellow triangle using a USB jig or an app called triangle away. Just Google search something like "triangle away apk+chainfire+xda" and you should be able to find it.
Sent from my SPH-D710 using Tapatalk

So how do I get cwm back. I just tried to start all the way from stock el29 and then get 26 And my phone was messing up until I put Frankenstein back on
Sent from my SPH-D710 using XDA

DreamManifested said:
So how do I get cwm back. I just tried to start all the way from stock el29 and then get 26 And my phone was messing up until I put Frankenstein back on
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Why do you need cwm recovery?
Sent from my SPH-D710 using Tapatalk

Nevermind i got swype and face unlock now. Just put the apk on my usb and used astro. Thanks man
Sent from my SPH-D710 using XDA

slick_rick said:
Oh well your cwm recovery disappeared because it wasnt packed into the kernel that came with the rom you flashed. And you can get rid of the yellow triangle using a USB jig or an app called triangle away. Just Google search something like "triangle away apk+chainfire+xda" and you should be able to find it.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Hey... I hit the thank button but I got the triangle away and it worked like a charm! Thanks again. Maybe they can get the CWM 5.0.2.7 to stay packaged in the ROM setups in the future!

so i tried to redo this flash with the el26 kernel. but then my phone started acting crazy, telling me that the calendar storage stopped working. finally after putting frankenstein back on my phone, it stopped coming up. the only problem im experiencing now is that i cant download pics in my text messaging. but i can use my 3g, 4g, and wifi for everything else. I dunno if this is because im in PR or because i messed something up. Please give me some feedback if you know anything

You started up with el26? That will never work with this rom. You need an ics kernel.
Sent from my GT-P7510 using xda premium

i know. but when you flash the rom it changes to ics. im saying, initially i started with the el29. QBkind77 advises to flash it after having the el26 installed, but i was too hasty.

Hmmh...i only ever do el26 never el29. I'm not sure what happened then. You are correct if you flashed the ROM it is ics. It must have been a bad flash or a bad download as well, sorry.
Sent from my GT-P7510 using xda premium

I'm on Blu Kuban and I am on EL29 QB King 77 said I don't really need to switch Modems?? Is that corret? One XDA member said he uses FE 22 with out issue. I am using the ICS Blu Cuban rom.

Aokp flashing issue

Having the hardest time flashing this. Was running it all weekend till yesterday when I went to update profile (blazer gb). I went flash back and it will not flash I hang up on the sgs 2 screen. I've gone back to stock and re-root did everything I could right and still no go.
Went and did sfhubs el26 odin (which did put the triangle on the start up) and it wouldn't let me complete th flash due to it being the euro model. I don't know. Love this Rom super nice GREAT battery.
Wondering how to get this fixed on my end.
Sent from my SPH-D710 using XDA
Sent from my SPH-D710 using XDA

What do you mean euro model? Can you list out the steps you took?
Sent from my SPH-D710 using Tapatalk

Hopefully you haven't messed your phone up too bad already.
Try getting into download mode and then use odin one click back to el29 and start over!

Sorry I ment the international version (gt9100) not the euro version. My phone works I have blend on here atm.
Alright so while I was on Aokp I
1. Flashed el26 with moblie odin.
2. Backed up Rom
3. Flashed calks wipe all
4. Flashed blazer 4.1
5. Updated profile.
6. Flashed el26 with mobile odin
Alright so here is where I was rushing.
7. Restored backup
8. Flashed fe16 repack
9. Boot.
So hindsight being the birch lover it is I should have done some wiping before step 7 and after step 7.
ROM wouldn't boot. I was able to get to download mode no and flashed stock el29 with pc odin. Phone still wouldn't boot. At this point I'm kinda getting worried I did something really dumb. Went into the stock recovery and wiped data and cache. Stock booted fine after that.
I root using one click and got my mobile odin on. Flashed el26 wiped everything tried to restore and wiped again and flashed kernel and wiped again. Wouldn't boot.
Did all the above again using pc odin el26 which gave me the triangle on boot up screen no bigger to me just butt ugly. Went into el26 recovery and tried to flash Rom fresh and still would go past boot up screen.
So I'm back on gb wanting silk back on my phone. Just don't know what to do next.
Sent from my SPH-D710 using XDA

i think step 8 is where you messed up. I believe thats a TouchWiz only kernel. You need an AOKP specific kernel to boot AOKP

Yeah I'm pretty sure that you're right. Got home where I had access to normal Odin just in case. Did everything twice. Manual wiped twice, calks format script twice flashed twice wiped again twice and bada Bing pow. Dopest from I've ever use is back up and rolling.
One question I have is how do I restore a back up. I understand it can only be done with el26 kernel but I guess I'm not clear on the process I guess.
Sent from my SPH-D710 using XDA

Gibsonusa said:
Having the hardest time flashing this. Was running it all weekend till yesterday when I went to update profile (blazer gb). I went flash back and it will not flash I hang up on the sgs 2 screen. I've gone back to stock and re-root did everything I could right and still no go.
Went and did sfhubs el26 odin (which did put the triangle on the start up) and it wouldn't let me complete th flash due to it being the euro model. I don't know. Love this Rom super nice GREAT battery.
Wondering how to get this fixed on my end.
Sent from my SPH-D710 using XDA
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Are you really flashing the roms from here then? The I-9100 is a GSM phone and quite frankly the actual I-9100 forum has a much bigger variety and those are the roms you should be using. Not any of the ones from here since this is a CDMA device.

Gibsonusa said:
Yeah I'm pretty sure that you're right. Got home where I had access to normal Odin just in case. Did everything twice. Manual wiped twice, calks format script twice flashed twice wiped again twice and bada Bing pow. Dopest from I've ever use is back up and rolling.
One question I have is how do I restore a back up. I understand it can only be done with el26 kernel but I guess I'm not clear on the process I guess.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
quite simple actually. Just odin/mobile odin the el26 kernel/recovery. Restore the backup, then flash an AOKP kernel. reboot and you're set.

In an el26 recovery, flash aokp twice. The first flash doesn't do it all the way. Then flash gapps.

im0rtalz said:
Are you really flashing the roms from here then? The I-9100 is a GSM phone and quite frankly the actual I-9100 forum has a much bigger variety and those are the roms you should be using. Not any of the ones from here since this is a CDMA device.
Click to expand...
Click to collapse
No I have an epic 4g touch, but when you flash el26 kernel threw PC Odin it gives you the yellow triangle. I bought a USB jig on amazon for like five bucks that will be here on Friday and it will get rid of that stupid yellow triangle and reset my Odin count too.
Sent from my SPH-D710 using XDA

Stuck in stock recovery

Hello, I was on an ics rom and wanted to flash a different, so I mobile odined the el26 kernel which I thought it was the cwm one.... I guess not and now the only thing I can do is get to stock recovery and all that let's me do is apply an update. Is there anything I can put on the sd card ofu other phone and then swap that the recovery will let me flash? I know I can just odin when I get home but trying to do this from work. Thanks
Sent from my PH44100 using XDA

Mobile Odin in play store
Sent from my ridiculously long named phone ---
Sprint Samsung Galaxy S II Epic 4G Touch

dcaplinger76 said:
Hello, I was on an ics rom and wanted to flash a different, so I mobile odined the el26 kernel which I thought it was the cwm one.... I guess not and now the only thing I can do is get to stock recovery and all that let's me do is apply an update. Is there anything I can put on the sd card ofu other phone and then swap that the recovery will let me flash? I know I can just odin when I get home but trying to do this from work. Thanks
Sent from my PH44100 using XDA
Click to expand...
Click to collapse
You could put your phone into download mode and install one of sfhub's one click factory restores.
He has one for pretty much every version.
Latest Gingerbread: http://forum.xda-developers.com/showthread.php?t=1433101
Latest ICS: http://forum.xda-developers.com/showthread.php?t=1671356

There is one kernel with CWM and one without it.

You'll have to wait until you get home. You have a GB kernel with an ICS ROM and that's why it won't boot all the way. And since you can't turn the phone all the way on Mobile Odin is out of the question. There really is no way to fix it without your computer.

MeWarning said:
You'll have to wait until you get home. You have a GB kernel with an ICS ROM and that's why it won't boot all the way. And since you can't turn the phone all the way on Mobile Odin is out of the question. There really is no way to fix it without your computer.
Click to expand...
Click to collapse
This. You're going to have to use odin on a computer.
Sent from my SPH-D710 using Tapatalk 2

No CWM on EL29 + EL26 Recoverys

I am having issues booting into CWM EL26 + EL29 Recoveries.
I am able to odin the kernal but it just sticks on the Samsung logo if I try to access CWM.
It used to reboot and either go right into CWM or I would do Volume Up and Power to access.
I am currently on Paradox Rom GB27. I am trying to flash a ROM that needs EL26 or EL29 but cant access.
Any idea why I cannot access?
Also, if I have the charger plugged in (usb to comp), the screen gets stuck on a battery icon like its charging but doesnt move.
(think thats just because the charger is plugged in) BUT it seems that whatever this kernal is doing it the phone it is Freezing it at that first boot point.
I reflashed GB27 so im fine for now but just want to solve this mystery.
Any help appreciated! thanks!!

deviouskind said:
I am having issues booting into CWM EL26 + EL29 Recoveries.
I am able to odin the kernal but it just sticks on the Samsung logo if I try to access CWM.
It used to reboot and either go right into CWM or I would do Volume Up and Power to access.
I am currently on Paradox Rom GB27. I am trying to flash a ROM that needs EL26 or EL29 but cant access.
Any idea why I cannot access?
Also, if I have the charger plugged in (usb to comp), the screen gets stuck on a battery icon like its charging but doesnt move.
(think thats just because the charger is plugged in) BUT it seems that whatever this kernal is doing it the phone it is Freezing it at that first boot point.
I reflashed GB27 so im fine for now but just want to solve this mystery.
Any help appreciated! thanks!!
Click to expand...
Click to collapse
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..

Gil81 said:
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Click to expand...
Click to collapse
I can try mobile odin. I have the full version. I will give it a shot. The thing is
I had those kernals for over a year, always used them, worked fine.
Now all of a sudden they dont. I tried downloading agai , checked md5, everything appears correct.
I will post back the results.

Gil81 said:
I use Mobile Odin to flash el29 direct boot kernel..and have never had an issue.. There is a lite version of mobile Odin on xda.. I would try that.. Make sure the md5's match on the kernel.. Mobile Odin will check it for you..
Click to expand...
Click to collapse
No luck with mobile odin. Same thing. Stuck at the White Samsung Logo.
I am out of options. Unless there is another kernel I can try that is similar to el26 + el29.
Its weird how gb27 works fine... I just dont understand that. Could something be broke or misconfigured on my phone to not allow
installing el26 + el29?

deviouskind said:
No luck with mobile odin. Same thing. Stuck at the White Samsung Logo.
I am out of options. Unless there is another kernel I can try that is similar to el26 + el29.
Its weird how gb27 works fine... I just dont understand that. Could something be broke or misconfigured on my phone to not allow
installing el26 + el29?
Click to expand...
Click to collapse
I'm out.. I can't think of anything.. If you've tried new zips of each.. I'll keep looking but the first couple searches I did where not promising..

Gil81 said:
I'm out.. I can't think of anything.. If you've tried new zips of each.. I'll keep looking but the first couple searches I did where not promising..
Click to expand...
Click to collapse
Thanks for your help. I appreciate it. I will stick with Paradox for now.
I wanted to try multi window rom but flashing on gb27 gives force closes and constant reboots.
Is it possible that once im on gb27, I cant go back and flash a gb rom? Ive done it
Before so thats why im stumped. Its like my phone doesnt support it.
I went on rwilco and downloaded multiple files and made sure they were with cwm.
They all do the same thing. Heres one for you... would water damage cause those kernels not to work?
Phones fine besides the kernel issue.
Also is it possible when doing cleanup on my phone and deleting
Old backups cause an issue? I thought to myself... wait I can restore an old rom with
El29! Lol no where to be found, already got rid of them.

deviouskind said:
Thanks for your help. I appreciate it. I will stick with Paradox for now.
I wanted to try multi window rom but flashing on gb27 gives force closes and constant reboots.
Is it possible that once im on gb27, I cant go back and flash a gb rom? Ive done it
Before so thats why im stumped. Its like my phone doesnt support it.
I went on rwilco and downloaded multiple files and made sure they were with cwm.
They all do the same thing. Heres one for you... would water damage cause those kernels not to work?
Phones fine besides the kernel issue.
Also is it possible when doing cleanup on my phone and deleting
Old backups cause an issue? I thought to myself... wait I can restore an old rom with
El29! Lol no where to be found, already got rid of them.
Click to expand...
Click to collapse
I've flashed many ROMs..from GB to JB and back the other way..lol. Never had that problem..you could try to go into recovery and flash the format all x 2.. Then flash the el26 kernel zip..reboot recovery.. I don't know...might work..The format all x 2 will get ya ready for flashing GB/ICS so it might help..once on el26 you can use jb format all x 2 to get ready for the new jb ROM flash.. Just a thought...

Gil81 said:
I've flashed many ROMs..from GB to JB and back the other way..lol. Never had that problem..you could try to go into recovery and flash the format all x 2.. Then flash the el26 kernel zip..reboot recovery.. I don't know...might work..The format all x 2 will get ya ready for flashing GB/ICS so it might help..once on el26 you can use jb format all x 2 to get ready for the new jb ROM flash.. Just a thought...
Click to expand...
Click to collapse
Good thought, I will give that a shot. Ive been manually wiping

deviouskind said:
Good thought, I will give that a shot. Ive been manually wiping
Click to expand...
Click to collapse
Try doing an Odin stock rooted Rom flash on ICS and then working from there using mobile Odin. Sometimes I can't do the pc Odin for those kernels so I use mobile Odin and it works perfect.
If you're trying to flash the new SHOShock Rom by TD then I'm having issues with that too. My phone gets stuck on a boot cycle and if I try to flash a nandroid back up then it gets stuck on the Samsung screen. Only way out of it was flashing a GB27 rooted stock Rom in pc Odin.
Sent from my SPH-D710 using Tapatalk 4

Good call, @FuMMoD.. I had told him about using mobile Odin...And I figured a back to stock ICS rooted then flash the el29 would be the next thing to try..I just hadn't heard from him if the wipe zip had helped.. Good looking out.. Nice to see people trying to help..This is the best forum...in my opinion..

Gil81 said:
Good call, @FuMMoD.. I had told him about using mobile Odin...And I figured a back to stock ICS rooted then flash the el29 would be the next thing to try..I just hadn't heard from him if the wipe zip had helped.. Good looking out.. Nice to see people trying to help..This is the best forum...in my opinion..
Click to expand...
Click to collapse
Just going off from where you left off man. I figured I would put my 2 cents in cause it sure can be a headache sometimes. I noticed when I'm out of luck pc Odin always saves me. I agree this community is great when it comes to helping each other.
Sent from my SPH-D710 using Tapatalk 4

Had a similar issue yesterday. I flashed the el29 recovery without wiping the /preload first, and it would not boot. Booted back into gb27 agat recovery via Odin, wiped the /preload, flashed el29 zip, and a successful boot. Don't know if it is the same issue, but that is my story...
Sent from my SPH-D710 using xda app-developers app

noobtoob said:
Had a similar issue yesterday. I flashed the el29 recovery without wiping the /preload first, and it would not boot. Booted back into gb27 agat recovery via Odin, wiped the /preload, flashed el29 zip, and a successful boot. Don't know if it is the same issue, but that is my story...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
How did you wipe the preload? I'm having issues flashing shostock and that might help me successfully flash it. Thanks!
Sent from my SPH-D710 using Tapatalk 4

First, download the el29 recovery kernel zip located in the rwilco repository.
Next either flash, or already be on the gb27 agat recovery kernel (also can be found in repository).
While in agat recovery, navigate to "mounts and storage"
Select "format /preload" (and whatever else you want to wipe out)
Back out, then "install zip from SD card"
Flash the el29 zip and you should be good to go.
Sent from my SPH-D710 using xda app-developers app