Develop Bugs

Is This Right ...!!!

Hello ...
I thing to ask some one to know.
i get information from Boot with command Fastboot Getvar all and at the point version-main: do not have the nothing.
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.2133156.UA15G
version-cpld: None
version-microp: None
version-main: <<<<<<<
version-misc: PVT SHIP S-ON
serialno: SH00FWM00000
imei: ***************
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: HTC__304
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 098a72e5
hbootpreupdate: 11
gencheckpt: 0
Can some one to hellp me ?
Thanks.

kartasos said:
version-cpld: None
version-microp: None
version-main: <<<<<<<
Click to expand...
Click to collapse
You surely got TWRP installed. It's a known bug that those entries are empty after flashing some of the last TWRP versions.

kartasos said:
Hello ...
I thing to ask some one to know.
i get information from Boot with command Fastboot Getvar all and at the point version-main: do not have the nothing.
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.2133156.UA15G
version-cpld: None
version-microp: None
version-main: <<<<<<<
version-misc: PVT SHIP S-ON
serialno: SH00FWM00000
imei: ***************
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: HTC__304
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 098a72e5
hbootpreupdate: 11
gencheckpt: 0
Can some one to hellp me ?
Thanks.
Click to expand...
Click to collapse
Hey, the version main can be found in software info.

andregardner said:
Hey, the version main can be found in software info.
Click to expand...
Click to collapse
Yeah it displays the software number of the installed (custom) rom. So it might not be the actual devices specific main software number ! This only applies when you are running your own stock rom.
Custom rom can be 2.22.401 while the true original is 1.56.720 (EXAMPLE) The last number is/should be embedded in the fastboot getvar info while the software number shows 2.22.401.
Long story short......software number on a custom rom doesn't mean anything !

Mr Hofs said:
Yeah it displays the software number of the installed (custom) rom. So it might not be the actual devices specific main software number ! This only applies when you are running your own stick rom.
Custom rom can be 2.22.401 while is true original is 1.56.720 (EXAMPLE) The last number is/should be embedded in the fastboot getvar info while the software number shows 2.22.401.
Long story short......software number on a custom rom doesn't mean anything !
Click to expand...
Click to collapse
You're right, but is he using a custom ROM?

andregardner said:
You're right, but is he using a custom ROM?
Click to expand...
Click to collapse
The question is why would you bring confusion ? Rule out future errors now on info and make it easier

Mr Hofs said:
The question is why would you bring confusion ? Rule out future errors now on info and make it easier
Click to expand...
Click to collapse
I wouldn't usually, I just knew this would solve his problem. But sure, I should have thought ahead.

andregardner said:
I wouldn't usually, I just knew this would solve his problem. But sure, I should have thought ahead.
Click to expand...
Click to collapse
This could not possibly solve the OP's problem. If he was trying to get his stock rom later (if he is on a custom rom, which is nowhere written if he's on stock or custom) without the additional given information he would be searching for the entire wrong stock backup/rom and would be sent into the woods. So there is no way you could "knew" this solved his problem.

Mr Hofs said:
This could not possibly solve the OP's problem. If he was trying to get his stock rom later (if he is on a custom rom, which is nowhere written if he's on stock or custom) without the additional given information he would be searching for the entire wrong stock backup/rom and would be sent into the woods. So there is no way you could "knew" this solved his problem.
Click to expand...
Click to collapse
Ok, well seeing as he didn't specify that he had a custom ROM it seemed very likely that he could find his version main that way. You were right, but I'm not sure why you're arguing with me.

I'm not arguing.....just saying :
Assumption is the mother of all .......
Cheers

Mr Hofs said:
I'm not arguing.....just saying :
Assumption is the mother of all .......
Cheers
Click to expand...
Click to collapse
True that!

Thanks Guys.

Rooted HTC One m8 Lollipop to Marshmallow

Hi. I read up on various threads and could not find the correct tutorial or method for this?
My HTC One m8 is rooted, unlocked, S-On, and running Lollipop with a GPE ROM.
I would like to upgrade to Marshmallow.
What is the easiest method to do so? No thread I've stumbled upon appears to be what I am looking for, but then again I'm awful at this stuff and also just kind of cautious because I've run into many issues in this kind of work and I just want to make sure I am on the right path.
Thanks, everyone.

Paralyzes said:
Hi. I read up on various threads and could not find the correct tutorial or method for this?
My HTC One m8 is rooted, unlocked, S-On, and running Lollipop with a GPE ROM.
I would like to upgrade to Marshmallow.
What is the easiest method to do so? No thread I've stumbled upon appears to be what I am looking for, but then again I'm awful at this stuff and also just kind of cautious because I've run into many issues in this kind of work and I just want to make sure I am on the right path.
Thanks, everyone.
Click to expand...
Click to collapse
Do fastboot getvar all, and post the results here, minus your ser# and IMEI/MEID

xunholyx said:
Do fastboot getvar all, and post the results here, minus your ser# and IMEI/MEID
Click to expand...
Click to collapse
I tried to make sense of how to go about that but I am honestly not sure at all.
What does that mean? How do I do that action? Thanks.

Paralyzes said:
I tried to make sense of how to go about that but I am honestly not sure at all.
What does that mean? How do I do that action? Thanks.
Click to expand...
Click to collapse
So download Sneaky's batch tool here
https://www.androidfilehost.com/?fid=95916177934536408
Then install it and then run htc_fastboot getvar all
Then report back

Paralyzes said:
I tried to make sense of how to go about that but I am honestly not sure at all.
What does that mean? How do I do that action? Thanks.
Click to expand...
Click to collapse
Did you root the phone yourself? If so, you should have ADB on your PC.
Plug your phone into your PC, get into ADB
adb reboot bootloader
fastboot getvar all

Mikee4fun said:
So download Sneaky's batch tool here
Then install it and then run htc_fastboot getvar all
Then report back
Click to expand...
Click to collapse
Thanks! Is there a file that will work with Mac, though? Sorry for being a pain in the ass

Paralyzes said:
Thanks! Is there a file that will work with Mac, though? Sorry for being a pain in the ass
Click to expand...
Click to collapse
Download Windows, 7,8,10. Install bootcamp, install windows, reboot, setup windows, install sneaky's tool. Then pay Ed in beer.
Cheers

Paralyzes said:
Thanks! Is there a file that will work with Mac, though? Sorry for being a pain in the ass
Click to expand...
Click to collapse
Yes.
Click this link.

Paralyzes said:
Thanks! Is there a file that will work with Mac, though? Sorry for being a pain in the ass
Click to expand...
Click to collapse
How did you unlock your bootloader before ? You should already have fastboot.
Open terminal, type ./fastboot getvar all
If you need fastboot/adb for mac, try this : http://forum.xda-developers.com/showthread.php?t=2390995

ckpv5 said:
How did you unlock your bootloader before ? You should already have fastboot.
Open terminal, type ./fastboot getvar all
If you need fastboot/adb for mac, try this
Click to expand...
Click to collapse
xunholyx said:
Yes.
Click to expand...
Click to collapse
Mikee4fun said:
Download Windows, 7,8,10. Install bootcamp, install windows, reboot, setup windows, install sneaky's tool. Then pay Ed in beer.
Cheers
Click to expand...
Click to collapse
Here are my results, fellas. Thanks for the help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.25.654.14
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: x
(bootloader) imei: x
(bootloader) imei2: x
(bootloader) meid: x
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b9f91aef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Paralyzes said:
Here are my results, fellas. Thanks for the help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.25.654.14
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: x
(bootloader) imei: x
(bootloader) imei2: x
(bootloader) meid: x
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b9f91aef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
You need to have the latest firmware from OMJ here http://forum.xda-developers.com/showthread.php?t=2729173
Looking at your info looks like you have the latest Sprint firmware already so you can go ahead and flash the following
http://forum.xda-developers.com/showthread.php?t=2762336

Mikee4fun said:
You need to have the latest firmware from OMJ here
Looking at your info looks like you have the latest Sprint firmware already so you can go ahead and flash the following
Click to expand...
Click to collapse
As mentioned, my phone is S-ON, and the link warns that in order to flash the latest firmware, I need to be S-OFF.
Is there another way?
If you're going to tell me I need S-OFF, I should mention I have tried, countless times and hours, to achieve S-OFF, with my friends too, and we just could not manage to get my phone to S-OFF.
So an S-ON method would be awesome.

Paralyzes said:
As mentioned, my phone is S-ON, and the link warns that in order to flash the latest firmware, I need to be S-OFF.
Is there another way?
If you're going to tell me I need S-OFF, I should mention I have tried, countless times and hours, to achieve S-OFF, with my friends too, and we just could not manage to get my phone to S-OFF.
So an S-ON method would be awesome.
Click to expand...
Click to collapse
You have the latest firmware available which according to Captain Throwback you should be able to flash his MM ROM and it should boot just fine.

Mikee4fun said:
You have the latest firmware available which according to Captain Throwback you should be able to flash his MM ROM and it should boot just fine.
Click to expand...
Click to collapse
Excellent. Thank you!
So, to refresh my memory:
1. Download the ROM on my Mac
2. Put my phone into bootloader and connect USB
3. Wipe everything?
4. Flash the ROM
5. Success?

Paralyzes said:
Excellent. Thank you!
So, to refresh my memory:
1. Download the ROM on my Mac
2. Put my phone into bootloader and connect USB
3. Wipe everything?
4. Flash the ROM
5. Success?
Click to expand...
Click to collapse
Yep, but do not flash the SU in recovery if it asks if you want to. It will cause you to lose root, if the ROM you are using already has a patched kernel for root.

Hi guys,
will this method work also with build number 4.16.401.10?? My Phone is also rooted, unlocked, s-on and at time running Revolution HD 43.0.
Is it in enough to Boot in recovery (TWRP) and do a Clean install? Or will i have problems with my root Access? Thank u very much!

htc one m8 (rooted)
what is the easiest way to update rooted htc one m8 from lollipop to marshmallow?
if it's s-off. how can i update? thanks in advance

xxred24xx said:
what is the easiest way to update rooted htc one m8 from lollipop to marshmallow?
if it's s-off. how can i update? thanks in advance
Click to expand...
Click to collapse
1: MM dev RUU
2: flash a custom MM rom.zip
3: flash MM firmware + rom

xunholyx said:
Do fastboot getvar all, and post the results here, minus your ser# and IMEI/MEID
Click to expand...
Click to collapse
Hey guys, can you help me with next steps as well? Here's info - Thanks a lot
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.631.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA43FWMxxxxx
(bootloader) imei: x
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 4a2bcc8a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

finding the right RUU

Hi,
second try. First post didn't go through... good thing I didn't save what I typed.
I'm trying to update my firmware, I've read somewhere that a RUU is the easiest way to do so. The one I found "somewhere" doesn't go through with the update proses. It spits out error 155, bootloader is relocked hboot version is 3.16.000 and I'm S-on (not that I was able to change that).
I'm loosing my patience and I'm about to throw the phone in the trash. I've some one can point me to a RUU that work with it I'd be in your debt. The carrier is O2 Germany BTW.
thanks and happy new year.

Even though I can guess which RUU that you might need .. is best to post
fastboot getvar all result without serial & imei no. to confirm it
If it is really a O2, I'll link you the RUU

ckpv5 said:
Even though I can guess which RUU that you might need .. is best to post
fastboot getvar all result without serial & imei no. to confirm it
If it is really a O2, I'll link you the RUU
Click to expand...
Click to collapse
thanks for the reply, I was able to calm down a bit in the meantime.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *****
(bootloader) imei: ****
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
here's the result I put in "****" instead of the serial & imei no. as I guess you meant I shouldn't post that online?

PortentousLad said:
thanks for the reply, I was able to calm down a bit in the meanwhile.
here's the result I put in "****" instead of the serial & imei no. as I guess you meant I shouldn't post that online?
Click to expand...
Click to collapse
Yeah .. not to post them online.
Here is your RUU - https://www.androidfilehost.com/?fid=95916177934555499
This will update your device directly to lollipop 4.20.206.1
then after check for software update, I believe there will be a few more OTAs

ckpv5 said:
Yeah .. not to post them online.
Here is your RUU - https://www.androidfilehost.com/?fid=95916177934555499
This will update your device directly to lollipop 4.20.206.1
then after check for software update, I believe there will be a few more OTAs
Click to expand...
Click to collapse
This will update your device directly to lollipop 4.20.206.1
then after check for software update, I believe there will be a few more OTAs[/QUOTE]
Thanks for the quick response. I've started the download, but slow internet means it'll take about 45min I'll report back once I'm done.
I realized I haven't really said anything about my intentions, I did that the first time I wrote the post which wasn't posted because my session in the forum got kicked or something.
I wanted to update CM to CM12 and I've managed to flash a stock ROM with lollipop but wifi won't work. So my main concern was updating the firmware so that I can flash CM12. This would enable me to do so?
thanks again.

Restore a stock ROM, you can't use lollipop. Wifi won't work because you have hboot 3.16.0000
You only can restore 1.54.206.10 stock ROM and its stock recovery then do all OTAs up to lollipop then only it work for wifi and other thing.
Using a RUU will remove everything on your device including internal storage (so make backup) then it will update everything including firmware to lollipop. So it is faster compare the nandroid backup method. You have less OTA to do.
Got to rest now .. already in bed .. its 4 AM here .. I'll check your progress tomorrow .. good luck

ckpv5 said:
Restore a stock ROM, you can't use lollipop. Wifi won't work because you have hboot 3.16.0000
You only can restore 1.54.206.10 stock ROM and its stock recovery then do all OTAs up to lollipop then only it work for wifi and other thing.
Using a RUU will remove everything on your device including internal storage (so make backup) then it will update everything including firmware to lollipop. So it is faster compare the nandroid backup method. You have less OTA to do.
Got to rest now .. already in bed .. its 4 AM here .. I'll check your progress tomorrow .. good luck
Click to expand...
Click to collapse
the applications froze... has been stuck at 0/6 for over an hour now.
Edited: I'm downloading the stock ROM from http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860 now and will try to go the long way round.

PortentousLad said:
the applications froze... has been stuck at 0/6 for over an hour now.
Click to expand...
Click to collapse
When you asked for RUU I expect you know all the requirements to run RUU ...
Your problem is related to PC/USB to device connection problem ...
You need to relock bootloader before you run RUU because your device is S-On
(I believe you did that as stated on post #1)
and you need a Windows PC with USB2.0 and latest HTC USB driver installed.
If you're not sure about HTC USB driver - download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install then after uninstall HTC Sync Manager but leave the HTC USB driver

ckpv5 said:
When you asked for RUU I expect you know all the requirements to run RUU ...
Your problem is related to PC/USB to device connection problem ...
You need to relock bootloader before you run RUU because your device is S-On
(I believe you did that as stated on post #1)
and you need a Windows PC with USB2.0 and latest HTC USB driver installed.
If you're not sure about HTC USB driver - download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install then after uninstall HTC Sync Manager but leave the HTC USB driver
Click to expand...
Click to collapse
My bad forgot to deínstall the sync manager... BRB.
Edited: That did the trick RUU worked flawlessly and all is fine now, as a token of my gratitude I donated some money. It's not much, about what I can afford right now, but I felt like it since I#ve been struggling with this problem for so long now.
So thank you very much for the quick responses and the patience. Have a nice year!

PortentousLad said:
My bad forgot to deínstall the sync manager... BRB.
Edited: That did the trick RUU worked flawlessly and all is fine now, as a token of my gratitude I donated some money. It's not much, about what I can afford right now, but I felt like it since I#ve been struggling with this problem for so long now.
So thank you very much for the quick responses and the patience. Have a nice year!
Click to expand...
Click to collapse
Great .. now you fixed it.
Thanks for the donation .. highly appreciated

Need help with RUU file
Hi can anyone help me with the right RUU file for my HTC ONE M8
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ******
(bootloader) imei: *******
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__059
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

eden2oscar said:
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__059
Click to expand...
Click to collapse
There is no RUU for your current firmware version which is 6.14.707.1
Install the latest TWRP 3.x (don't use your current one which I believe is 2.7.0.2)
and restore 6.14.707.1 nandroid backup
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860

ckpv5 said:
There is no RUU for your current firmware version which is 6.14.707.1
Install the latest TWRP 3.x (don't use your current one which I believe is 2.7.0.2)
and restore 6.14.707.1 nandroid backup
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Click to expand...
Click to collapse
I Have no backup

eden2oscar said:
I Have no backup
Click to expand...
Click to collapse
I know that you don't have backup .. that's why I gave the link to my backup thread.
Read post #1 in that thread on how-to : all the 14 steps
The backup is on post #3
I gotta go now ... good luck

ckpv5 said:
I know that you don't have backup .. that's why I gave the link to my backup thread.
Read post #1 in that thread on how-to : all the 14 steps
The backup is on post #3
I gotta go now ... good luck
Click to expand...
Click to collapse
:good:Thanks a lot man, it worked for me :good:

Please help me find the correct stock rom, s-on so might be needing equal or greater level
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.15.720.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

siddharthsachdeva said:
Please help me find the correct stock rom, s-on so might be needing equal or greater level
(bootloader) version-main: 6.15.720.2
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) security: on
Click to expand...
Click to collapse
Use 6.15.720.2 TWRP backup - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
or install 6.15.720.2 RUU zip in RUU mode - https://www.androidfilehost.com/?fid=24591000424941691

ckpv5 said:
Use 6.15.720.2 TWRP backup - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
or install 6.15.720.2 RUU zip in RUU mode - https://www.androidfilehost.com/?fid=24591000424941691
Click to expand...
Click to collapse
i dont want to use twpr, i prefer ruu zip or exe but the problem I already have this zip and it can not be execute using adb it shows the maximum allowed size reached kind of thingy and when put in external sdcard and restarted in bootloader/recovery it did pick the zip file. I waited for about mins and it said to press power button to restart and nothing changed tried a few times but nothing is happening. already run the fastboot oem lock command before doing all this. can i know what m i doing wrong? or can I have a exe file. thank u

siddharthsachdeva said:
i dont want to use twpr, i prefer ruu zip or exe but the problem I already have this zip and it can not be execute using adb it shows the maximum allowed size reached kind of thingy and when put in external sdcard and restarted in bootloader/recovery it did pick the zip file. I waited for about mins and it said to press power button to restart and nothing changed tried a few times but nothing is happening. already run the fastboot oem lock command before doing all this. can i know what m i doing wrong? or can I have a exe file. thank u
Click to expand...
Click to collapse
You need htc_fastboot.exe to install the RUU zip.
Follow the steps as explained here but using your own RUU zip (skip that no.1) -
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Or if you prefer the exe method .. you can follow this - http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749

ckpv5 said:
You need htc_fastboot.exe to install the RUU zip.
Follow the steps as explained here but using your own RUU zip (skip that no.1) -
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Or if you prefer the exe method .. you can follow this - http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749
Click to expand...
Click to collapse
Thank a lot bro please help me out of a new problem, ur method worked completely fine . I successfully switched from custom to stock rom and then installed the updates available. Now i wanted to root so
I unlocked bootloader using htc dev
Started the phone and all the apps optimized which took around30-40 mins
Now i shifted to bootloader installed twrp then installed supersu which i had already put in extsd
Phone didnt started for an hour stuck on htc screen
Used adb reboot bootloader and repeated everything all again right from fastboot oem lock doing ruu and all still it is same
It works all very fine before installing supersu after that all chaos dont know what to do

Help Me! My htc is bricked!

System on my htc got deleted. And I cannot boot my htc. The only thing that I have got an access to is a bootloader. I have already tried RUU(Which doesn't work for me ) and FUU (I am s-on so it also doesn't work). I wanna install stock HTC SENSE android on my beloved Htc but I have got no idea how do it :crying: Previously I had a Nexus 4 and flashing roms or returning back to stock was so easy on it . Please help me guys I know that you are experts and with your help we will find a solution.
My HTC MODEL is international I have got 4.16.401.13 OS Help Me!
About my device:
bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

szyminindy said:
System on my htc got deleted. And I cannot boot my htc. The only thing that I have got an access to is a bootloader. I have already tried RUU(Which doesn't work for me ) and FUU (I am s-on so it also doesn't work). I wanna install stock HTC SENSE android on my beloved Htc but I have got no idea how do it :crying: Previously I had a Nexus 4 and flashing roms or returning back to stock was so easy on it . Please help me guys I know that you are experts and with your help we will find a solution.
My HTC MODEL is international I have got 4.16.401.13 OS Help Me!
Click to expand...
Click to collapse
Hi, szyminindy...
I don't have the technical expertise to help you, but the guys who do, are likely going to ask you to post a...
Code:
fastboot getvar all
...output.
This will provide them with something to help diagnose your problem, and hopefully come up with a solution.
Dont forget to edit out (remove), your IMEI and device SERIAL numbers before posting.
Good luck.
Rgrds,
Ged.
EDIT: ...and which you have now done... :good:

Your bootloader is unlocked? If so, your device is not bricked at all.
Download twrp: https://dl.twrp.me/m8/twrp-2.8.7.0-m8.img.html
fastboot flash recovery twrp-2.8.7.0-m8.img
Now you have twrp, download some rom(sense,cm,aosp) and flash it.
Maybe someone posted twrp nand and recovery for your cid/mid(so you can get stock 6.0).
EDIT: Actually it's posted
It's on ckpv5's thread, you got lucky, you can easily get your stock 6.0
When you got some working rom(doesnt matter sense/cm/aosp), here is the stock recovery for your cid https://mega.nz/#!P8oHETTQ!0iKB-iZhMlfYKiE1jvBMyZtribJKgV-hf4Zdy2zAiig and stock rom
https://mega.nz/#!X9IjVASb!bNCxQJlDbX40cLHGlmP1qk0SaYfW93lo8jicFv81B-4 Make sure to download both files and follow instructions here: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I hope i helped ya

How to update to stock marshmallow from custom rom?

Hey guys..
I've been on cyanogenmod cm 12.1 for about six months now.. And completely out of touch with the entire process
So I'm s-on and wanted to go back to stock marshmallow from cm12.1
Which is the best way to go About it? Would really appreciate any help/advice.
Thank you so much!
Sent from my m8 using Tapatalk

Relock your bootloader and run your RUU (hopefully you have a RUU for your device). Make sure your MID and CID match to that of your RUU. You are back to complete stock (Marshmallow).

androidindian said:
Hey guys..
I've been on cyanogenmod cm 12.1 for about six months now.. And completely out of touch with the entire process
So I'm s-on and wanted to go back to stock marshmallow from cm12.1
Which is the best way to go About it? Would really appreciate any help/advice.
Thank you so much!
Sent from my m8 using Tapatalk
Click to expand...
Click to collapse
A RUU would be an ideal start.
To better assist, how exactly did you get CM12.1 on that HTC to begin with? I'm s-off so I have no idea whether there are more or less steps involved.
I want to make sure the info I dig up applies to your situation and device. Take your time to gather any details you recall.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

harihacker said:
Relock your bootloader and run your RUU (hopefully you have a RUU for your device). Make sure your MID and CID match to that of your RUU. You are back to complete stock (Marshmallow).
Click to expand...
Click to collapse
Awesome! Thank you! Any link to where I can get the right ruu mate? Thanks a lot!
Sent from my m8 using Tapatalk

That depends on which device you have. What is the MID/CID of your device?
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
RUU's can be downloaded directly from HTC.

androidindian said:
Awesome! Thank you! Any link to where I can get the right ruu mate? Thanks a lot!
Sent from my m8 using Tapatalk
Click to expand...
Click to collapse
Post the results of fastboot getvar all. Make sure to delete the serial# and IMEI from your post (that's private info)
With your getvar it will be easiest to direct you on the proper RUU for your device.

xunholyx said:
Post the results of fastboot getvar all. Make sure to delete the serial# and IMEI from your post (that's private info)
With your getvar it will be easiest to direct you on the proper RUU for your device.
Click to expand...
Click to collapse
Thank you so much mate! sure here are the details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
please advice the right ruu to be used to get back to stock? thank you so so much!!

androidindian said:
Thank you so much mate! sure here are the details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
please advice the right ruu to be used to get back to stock? thank you so so much!!
Click to expand...
Click to collapse
Here is the 4.16.401.10 RUU. This will take you back to stock so that you can receive the Marshmallow OTA.
Download that to your PC, then hook up your phone. Since you are S-On, you will need to relock your bootloader first. In fastboot: fastboot oem lock
Then double click on the RUU.exe that you downloaded and follow the prompts.
After you are back to stock, check in settings > about > software updates. You should get an OTA to update to Marshmallow. It might not come right away. Be patient. It might take a couple of days to receive the OTA notification.
Good luck!

Also Check this thread: http://forum.xda-developers.com/showthread.php?t=2735235

xunholyx said:
Here is the 4.16.401.10 RUU. This will take you back to stock so that you can receive the Marshmallow OTA.
Download that to your PC, then hook up your phone. Since you are S-On, you will need to relock your bootloader first. In fastboot: fastboot oem lock
Then double click on the RUU.exe that you downloaded and follow the prompts.
After you are back to stock, check in settings > about > software updates. You should get an OTA to update to Marshmallow. It might not come right away. Be patient. It might take a couple of days to receive the OTA notification.
Good luck!
Click to expand...
Click to collapse
Amazing!! Thank you so so much mate.. everything went super smoothly and now im updating to marshmallow soon, back on the above stock.. yay!