Screwed Up Need Help URGENT - One (M8) Q&A, Help & Troubleshooting

Hi. My phone has had issues with not being able to be mount backups on TWRP and have tried everything to fix the problem with no luck. I read somewhere on a post that the only way I can fix my problem is to relock my bootloader and flash a RUU which I'm in the process of doing now. This all started when I accidentally deleted my system files (which was stupid) in TWRP. Have I screwed up and will I be able to flash the RUU onto my phone.

NEVER do anything until you got the correct files. Who says there is a RUU ? we need info.....
Post the outcome of :
Fastboot getvar all (and del the IMEI & SERIAL)
Can you enter the bootloader and the recovery ?

Mr Hofs said:
NEVER do anything until you got the correct files. Who says there is a RUU ? we need info.....
Post the outcome of :
Fastboot getvar all (and del the IMEI & SERIAL)
Can you enter the bootloader and the recovery ?
Click to expand...
Click to collapse
Thanks for the quick response, it's really late right now but hopefully I can post those details tomorrow morn. I can enter bootloader/hboot which my computer recognizes. Though I have relocked the bootloader which I can easily unlock, it's status is relocked. My recovery (TWRP) was killing me though as every time I pushed a file through adb which was received the bloody program spat out an error every time about being unmountable to the system and cache. I know I shouldn't have rooted my device if I didn't know what I was doing and what did you mean about not having the correct files? I did have a cm11 stable backup but that wouldn't "mount to disk" either. From what I have heard I think this is a soft brick which would mean it is repairable? Or is it just a lost cause?

Also if this helps, I am s-on and wiped my dalvik, cache, data and accidents the system. I also have a 32 gb sd card installed on the device.

Cool. The easiest way is to unlock the bootloader, load a rom.zip (preferably) a sense 6 (close to stock rom like arhd or maximus) and perform a full wipe in the recovery and install the rom.zip via the recovery (external sd)
See if there are any errors in this process

Mr Hofs said:
Cool. The easiest way is to unlock the bootloader, load a rom.zip (preferably) a sense 6 (close to stock rom like arhd or maximus) and perform a full wipe in the recovery and install the rom.zip via the recovery (external sd)
See if there are any errors in this process
Click to expand...
Click to collapse
Tried this, if I try to load a rom onto my m8 it will automatically fail. The rom is not able to be mounted to anything. I also tried flashing a boot.img to try to get it to startup but it also failed from the same reasons as flashing a sense base rom and cm11. Also before I cleared the system partition I had a gpe rom installed if that helps.

Was it a complete gpe or just a Rom? Also if Roms are failing to install get the sdcard from the phone and use a card reader...then put the zip on it and flash it..normally a boot.img fastboot should be flashed without problems

Read this thread carefully, it has info about not mounting issues !
http://forum.xda-developers.com/showthread.php?t=2850470
Maybe this applies to you too

Mr Hofs said:
Read this thread carefully, it has info about not mounting issues !
http://forum.xda-developers.com/showthread.php?t=2850470
Maybe this applies to you too
Click to expand...
Click to collapse
Ok now I am able to do the fastboot getvar all cmd, here it is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ---
(bootloader) imei: ---
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.204s
Hope this helps
Also I have tried to fix using the solution mentioned though I don't know where to download the "mkfs.ext4 binary".

Mr Hofs said:
Who says there is a RUU ? we need info.....
Click to expand...
Click to collapse
There is an RUU for the AT&T Variant online. I used it to restore my M8 back to stock. There is a link here, you just got to look for it.

Oditius said:
There is an RUU for the AT&T Variant online. I used it to restore my M8 back to stock. There is a link here, you just got to look for it.
Click to expand...
Click to collapse
Hi, would I be able to flash an RUU onto my m8 International version with s-on?

jarrodli2 said:
Hi, would I be able to flash an RUU onto my m8 International version with s-on?
Click to expand...
Click to collapse
Yes,you can....find the ruu. And as for that file you could have taken the initiative to PM the user that has it !
Oditius said:
There is an RUU for the AT&T Variant online. I used it to restore my M8 back to stock. There is a link here, you just got to look for it.
Click to expand...
Click to collapse
LOL People rely on having a ruu to much. Good luck in finding one for him. Since he is s-on it has to match his official main too because downgrading is not an option (with a ruu)
1 ruu for the AT&T....does it work on a Sprint device ? Does it work on a international carrier branded device ?

Mr Hofs said:
Yes,you can....find the ruu first
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
People rely on having a ruu to much. Good luck in finding one for him. Since he is s-on it has to match his official main too because downgrading is not an option (with a ruu)
Click to expand...
Click to collapse
GOD YES!, i've somehow managed to get the bloody device to boot up but now its stuck in a bootloop. I think i opened up a custom rom extracted the boot.img file and flashed it to something (not sure what). Does this mean i have to manually replace each partition (data, cache, system ect.) with a part of a rom?

I would install a fresh rom via the sdcard.
And you "think" you opened a rom.zip and flashed a boot.img ? Seriously .....

Mr Hofs said:
I would install a fresh rom via the sdcard.
And you "think" you opened a rom.zip and flashed a boot.img ? Seriously .....
Click to expand...
Click to collapse
Unfortunaly the problem still persists (log) ;
E: Can't mount /sdcard
E: Can't mount /data
E: Can't mount /cache
E: Can't mount /system
Installation aborted.
I really don't know how i've gotten to this point, should I just take my phone back to the manufacturer for repair?

Oditius said:
There is an RUU for the AT&T Variant online. I used it to restore my M8 back to stock. There is a link here, you just got to look for it.
Click to expand...
Click to collapse
Does it matter what m8 you have...like I have a international one m8 so can I use the at&t RUU
Sent from my HTC One_M8 using XDA Free mobile app

No you need to PM the guy with the mkfs file and fix that first.

ok just pm'ed him, hope he can respond soon. As for the state of my phone, is it soft or hard bricked? I just can't tell the difference because other people in the same situation as me have given up.

Its soft......as long as you can reach the bootloader it could be fixed.
ILIVE4HEAD said:
Does it matter what m8 you have...like I have a international one m8 so can I use the at&t RUU
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
If you want a phone that doesn't work.....then yes !

Mr Hofs said:
Its soft......as long as you can reach the bootloader it could be fixed.
If you want a phone that doesn't work.....then yes !
Click to expand...
Click to collapse
Lol thanks
Sent from my HTC One_M8 using XDA Free mobile app

Related

[Q] efs and IMEI messed up, HOX endeavoru

Hello! I've tried various places but can't find a soloution so:
I successfully rooted and flashed my HTC Once X International with AOKP ICJ 4.2.2 a while ago. Few months later, I decided to try the ViperX rom but ran into some problems. After wiping, flashing the boot.img with the Venom Flasher and successfully installing the new rom, I had no service and was "stuck" in Airplane mode. I found out that my IMEI is blank and that my efs folder is also gone. I have a stock root nandroid backup but it does me no good with the missing efs folder and IMEI. I am using TWRP v2.4.0.0. since that's the only version that gave me touch control. I have no backup of the efs folder as I was not even aware of it's existence until today.
I am really sorry if this question has been answered before but I could not find a solution no matter how hard I searched. What do?
Here is some information.
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: ***************
(bootloader) imei: *******************
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3954mV
(bootloader) devpower: 77
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.882s
I am considering installing a RUU, but I cannot find the correct one. Can anyone point me in the right direction? I checked androidruu.com but the one with the correct baseband for europe wouldn't install.
Ruu doesn't exist, only backups.....
Sent from my HTC One X using XDA Premium 4 mobile app
Mr Hofs said:
Ruu doesn't exist, only backups.....
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So that means, since I didnt't copy my efs folder I'm screwed and stuck with a non-connecting HOX?
Probably yes. Flash back the stock rom, and flash the boot.img. if it still doesn't connect there is pretty much nothing you can do
Sent from my HTC One X using XDA Premium 4 mobile app
Manchue said:
So that means, since I didnt't copy my efs folder I'm screwed and stuck with a non-connecting HOX?
Click to expand...
Click to collapse
This is
STOCK ROM and STOCK RECOVERY 3.20.401.1
Thant said:
This is
STOCK ROM and STOCK RECOVERY 3.20.401.1[/URL]
Click to expand...
Click to collapse
Thank you very much! The odexed rom is giving me an error though, I can't download it :crying:
Thank you so much Thant. I flashed the custom recovery and kernel onto my stock JB root backup and it works, I have signal. I can't thank you enough, you deserve more. Also thank you Mr Hofs as you suggested this.
Imei Missing
Manchue said:
Thank you so much Thant. I flashed the custom recovery and kernel onto my stock JB root backup and it works, I have signal. I can't thank you enough, you deserve more. Also thank you Mr Hofs as you suggested this.
Click to expand...
Click to collapse
how did you do that?? my hox seem same as your...so can you please tell me the procedure how you did that!! Please i m desperate
s_tmg said:
how did you do that?? my hox seem same as your...so can you please tell me the procedure how you did that!! Please i m desperate
Click to expand...
Click to collapse
First, make sure your phone has same cid, otherwise flashing incorrect rom will cause more problem.
The steps are as follow:
- Identify your cid and find the correct stock rom (latest update)
- Unlock bootloader
- Flash custom recovery (twrp, cwm, philz)
- Boot to recovery > Mount sd card and copy rom (zip file) to sd card
- Flash stock rom and boot.img (follow rom instruction carefully)
- Reboot and it should work.
If you dont know any of the above steps, please search the forum for details. You can also raise question here, I and others will try to help at soonest.
Sent from my HTC One X using xda app-developers app
Imei Missing
xb2 said:
First, make sure your phone has same cid, otherwise flashing incorrect rom will cause more problem.
The steps are as follow:
- Identify your cid and find the correct stock rom (latest update)
- Unlock bootloader
- Flash custom recovery (twrp, cwm, philz)
- Boot to recovery > Mount sd card and copy rom (zip file) to sd card
- Flash stock rom and boot.img (follow rom instruction carefully)
- Reboot and it should work.
If you dont know any of the above steps, please search the forum for details. You can also raise question here, I and others will try to help at soonest.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
thanks man for response.. i am already rooted and my system cid ,main version ,hboot,baseband is same as he have mentioned above..so xb2 can you provide me the link for the nandroid backup.. that would help a lot
s_tmg said:
thanks man for response.. i am already rooted and my system cid ,main version ,hboot,baseband is same as he have mentioned above..so xb2 can you provide me the link for the nandroid backup.. that would help a lot
Click to expand...
Click to collapse
You can find STOCK ROM, Boot image, Recovery 3.20.401.1 for your CID at Thant's link as quoted below.
Install a custom recovery (philz or twrp or cwm) and proceed with flashing stock rom.
Thant said:
This is
STOCK ROM and STOCK RECOVERY 3.20.401.1
Click to expand...
Click to collapse

Please help .might really be bricked

I unlocked and installed twrp and 4.4.3 gpe rom on an att m8. Then tried to update to 4.4.4 and my phone went into bootloop. I booted to bootloader and now its a black screen and hboot 3.18.0.0000. Now when I try to load recovery , the twrp image comes up blinks a couple times and goes into boot loop. I've tried reflashing recovery but it doesn't seem to help.
I cant seem to get anything to work. All I can do is play around with the bootloader and fastboot
help please
this is my getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I also cant run the 1.58 ruu because my hboot is 3.18 and my cid is cws__001.
this totally sucks
First of all delete your serial and IMEI asap. And try this fastboot command :
Fastboot erase cache
Then enter the recovery
Mr Hofs said:
First of all delete your serial and IMEI asap. And try this fastboot command :
Fastboot erase cache
Then enter the recovery
Click to expand...
Click to collapse
failed remote not allowed
any other ideas
Failed remote not allowed is in most cases an indication that the bootloader is locked/relocked
First unlock your phone . Download a compatible kernel for your att m8 4.4.x.
Extract kernel.zip and flash boot.img with adb in fastboot.
Mr Hofs said:
Failed remote not allowed is in most cases an indication that the bootloader is locked/relocked
Click to expand...
Click to collapse
its unlocked, I was able to install phillz recovery but it still bootloops. I do have enough time to wipe/format real quick. any ideas?
amirsardari said:
First unlock your phone . Download a compatible kernel for your att m8 4.4.x.
Extract kernel.zip and flash boot.img with adb in fastboot.
Click to expand...
Click to collapse
I am unlocked and I downloaded a att 1.58 rom and flashed the boot.img . it took but im still boot looping
Try this
http://forum.xda-developers.com/showthread.php?p=54200899
Sent from my HTC One_M8 using Tapatalk
---------- Post added at 08:34 AM ---------- Previous post was at 08:32 AM ----------
I use it to completely restore to stock again. Just read the ENTIRE INSTUCTIONS, i am on at&t also.
Sent from my HTC One_M8 using Tapatalk
joshzdad2013 said:
Try this
http://forum.xda-developers.com/showthread.php?p=54200899
Sent from my HTC One_M8 using Tapatalk
---------- Post added at 08:34 AM ---------- Previous post was at 08:32 AM ----------
I use it to completely restore to stock again. Just read the ENTIRE INSTUCTIONS, i am on at&t also.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
thanks. but fails after signature check. I think this is done for
I'm thinking without s-off, having a 3.18 hboot and cws__001 cid this phone is going in the garbage today
hugebulge said:
I'm thinking without s-off, having a 3.18 hboot and cws__001 cid this phone is going in the garbage today
Click to expand...
Click to collapse
If cwm Philz is working take another Rom and flash it...what's the problem? Or all recoveries are broken? There are also complete stock Roms take one of them root it and s-off...if Firewater doesn't work use sunshine, it's really worth it to pay 25$ if you say that phone is going into garbage...means you want to buy another one...except try to s-off it and yea...also if you want to update the Rom via official ota you need always the stock recovery otherwise it will never work...
One-M8-Master said:
If cwm Philz is working take another Rom and flash it...what's the problem? Or all recoveries are broken? There are also complete stock Roms take one of them root it and s-off...if Firewater doesn't work use sunshine, it's really worth it to pay 25$ if you say that phone is going into garbage...means you want to buy another one...except try to s-off it and yea...also if you want to update the Rom via official ota you need always the stock recovery otherwise it will never work...
Click to expand...
Click to collapse
philz works for 8 seconds then bootloops and twrp just blinks then bootloops. I cant flash any rom so their is no chance of firewater or sunshine. thanks for the 25$ offer but I think ill call htc and pay to have the motherboard replaced or just smash it to pieces and buy another phone.
Is their any way of changing the cid without s-off? I think I remember getting supercid on the m7 without s-off
hugebulge said:
philz works for 8 seconds then bootloops and twrp just blinks then bootloops. I cant flash any rom so their is no chance of firewater or sunshine. thanks for the 25$ offer but I think ill call htc and pay to have the motherboard replaced or just smash it to pieces and buy another phone.
Is their any way of changing the cid without s-off? I think I remember getting supercid on the m7 without s-off
Click to expand...
Click to collapse
No other way...but you can try something.....I think there are different twrp or Philz images because of the different variants of the phone...so try to get the real one for your device..maybe that should be the problem...if not try fastboot erase cache ..but I think it's more because of the wrong image..
All those things are user issues so no need to bash HTC or the phone because you are doing things wrong
One-M8-Master said:
No other way...but you can try something.....I think there are different twrp or Philz images because of the different variants of the phone...so try to get the real one for your device..maybe that should be the problem...if not try fastboot erase cache ..but I think it's more because of the wrong image..
All those things are user issues so no need to bash HTC or the phone because you are doing things wrong
Click to expand...
Click to collapse
I 100% agree with you that it is completely my fault and not HTC. Im not bashing HTC at all, I'm going to buy another m8. Smashing would just make me happy after spending 9 hours so far trying every possibility over and over.
It is totally bricked though. I had another m8 before this phone and upgraded the same way but it was s-off and I didn't have this problem. Firewater didn't work on this phone. The problem is that something is corrupted and their is no correct ruu for 3.18 hboot with CWS__001.

[Q] Get back to stock M8 VODAP110 - Having massive problems

Good morning guys.
I am wondering if anyone is able to help me before i go completely nuts trying to work this out. (I also hope its ok to make a new thread)
A few weeks ago i rooted my M8 following the steps on this website (htconeroot. - how-to-root-htc-one-m8/) with no issues at all. Unlocked the boot loader and also there is the software tag saying modified (my understanding is this is normal). Installed the custom recovery with no drama.
A couple of days ago i got the OTA notification that i can now download 5.0.1 (Happy days) however this is where i seem to be running into problems. I know that i need to revert to the stock recovery from TWRP and then from here need to relock the boot loader to install the OTA update. I think my main problem is that i don't know what version of the stock rom i need to install. I have tried a few but none of them will boot into recovery from the boot loader.
So this is where i am.
Boot loader works fine and will run fast boot and boot to custom recovery - does state that the OS - (Blank)
Davids-MBP:mfastboot-v2 Raynor$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 26b322e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
I have a swisscom locked phone (VODAP110) the software version is (3.29.166.9 from phone) however the main-version is blank, another website said i need a stock recovery (x.xx.166.x - Vodafone CH-DE (Switzerland - Germany))
The last stock recovery that i put on the phone was (3.29.161.5 recovery.img) this then would allow me to start the phone and run the OTA update. From here the phone will restart and start the update but after about 20/25% the phone will crash displaying a picture of the phone with a red triangle and upside down exclamation mark. I read somewhere that if this problem happens to erase the cache and it should fix the problem but it didn't.
Could anyone please point me in the correct direction or help me solve the problem i am having.
Do i need to ?????
1) install the correct stock recovery (if so could someone please help me find the correct version)
2) Flash the stock rom from HTCDev (no clue how to do this with fast boot and if it will restore the recovery)
3) Give up on OTA and look for a custom 5.0.1 flash and use TWRP to flash from recovery.
Thanks so much for any help.
raynordg said:
Good morning guys.
I am wondering if anyone is able to help me before i go completely nuts trying to work this out. (I also hope its ok to make a new thread)
A few weeks ago i rooted my M8 following the steps on this website (htconeroot. - how-to-root-htc-one-m8/) with no issues at all. Unlocked the boot loader and also there is the software tag saying modified (my understanding is this is normal). Installed the custom recovery with no drama.
A couple of days ago i got the OTA notification that i can now download 5.0.1 (Happy days) however this is where i seem to be running into problems. I know that i need to revert to the stock recovery from TWRP and then from here need to relock the boot loader to install the OTA update. I think my main problem is that i don't know what version of the stock rom i need to install. I have tried a few but none of them will boot into recovery from the boot loader.
So this is where i am.
Boot loader works fine and will run fast boot and boot to custom recovery - does state that the OS - (Blank)
Davids-MBP:mfastboot-v2 Raynor$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT43NWM12442
(bootloader) imei: xxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 26b322e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
I have a swisscom locked phone (VODAP110) the software version is (3.29.166.9 from phone) however the main-version is blank, another website said i need a stock recovery (x.xx.166.x - Vodafone CH-DE (Switzerland - Germany))
The last stock recovery that i put on the phone was (3.29.161.5 recovery.img) this then would allow me to start the phone and run the OTA update. From here the phone will restart and start the update but after about 20/25% the phone will crash displaying a picture of the phone with a red triangle and upside down exclamation mark. I read somewhere that if this problem happens to erase the cache and it should fix the problem but it didn't.
Could anyone please point me in the correct direction or help me solve the problem i am having.
Do i need to ?????
1) install the correct stock recovery (if so could someone please help me find the correct version)
2) Flash the stock rom from HTCDev (no clue how to do this with fast boot and if it will restore the recovery)
3) Give up on OTA and look for a custom 5.0.1 flash and use TWRP to flash from recovery.
Thanks so much for any help.
Click to expand...
Click to collapse
Maybe this one works? This is the 3.29.161.9 recovery. It's from my VODAPE17 cid
1: download the ota, take out the firmware.zip and in that zip is a recovery.img. that is your correct stock recovery that you need.
2: go to the general section - collection of backups and firmwares. Have a read there and look for your cid in the list with backups.
Please do not relock the bootloader that is not needed for an ota !
And delete your serial !
I was forgotten to paste the url: https://mega.co.nz/#!nZkCWZAL!djqZnzAlVfHslzWJxUxvW5cLKHdI9BIhr_uxzjFxbng
I also have this Problem with my M8 (3.29.166.9). I also flashed the new recovery from the OTA, but when i flashed the OTA, the recovery wrote Status 7 error ...
New download of the OTA doesn't worked..
Any Idea ?
Sorted
Petert87 said:
Maybe this one works? This is the 3.29.161.9 recovery. It's from my VODAPE17 cid
Click to expand...
Click to collapse
Hi Petert87 tried this one the other day but it didn't work for me.
Mr Hofs said:
1: download the ota, take out the firmware.zip and in that zip is a recovery.img. that is your correct stock recovery that you need.
2: go to the general section - collection of backups and firmwares. Have a read there and look for your cid in the list with backups.
Please do not relock the bootloader that is not needed for an ota !
And delete your serial !
Click to expand...
Click to collapse
Mr Hofs, You absolute legend. This was a very quick fix (No. 1) back up and running now.
onkel_Andi said:
I also have this Problem with my M8 (3.29.166.9). I also flashed the new recovery from the OTA, but when i flashed the OTA, the recovery wrote Status 7 error ...
New download of the OTA doesn't worked..
Any Idea ?
Click to expand...
Click to collapse
Hi onkel.
the process i went through was as follows.
1) force download the OTA from swisscom and copy off to computer.
2) do what Mr Hofs said above and extract the ROM and dig out the recovery.img
3) reset with fast boot - (fastboot reboot-bootloader)
4) flash recovery (fastboot flash recovery recovery.img
5) fastboot erase cache
6) fastboot reboot
7) install OTA from within booted OS
8) wait.......
Thanks for taking the time to read through my problem guys.
@Mr Hofs if you would like the OTA update or recovery.mg please let me know.
raynordg said:
Hi Petert87 tried this one the other day but it didn't work for me.
Mr Hofs, You absolute legend. This was a very quick fix (No. 1) back up and running now.
Hi onkel.
the process i went through was as follows.
1) force download the OTA from swisscom and copy off to computer.
2) do what Mr Hofs said above and extract the ROM and dig out the recovery.img
3) reset with fast boot - (fastboot reboot-bootloader)
4) flash recovery (fastboot flash recovery recovery.img
5) fastboot erase cache
6) fastboot reboot
7) install OTA from within booted OS
8) wait.......
Thanks for taking the time to read through my problem guys.
@Mr Hofs if you would like the OTA update or recovery.mg please let me know.
Click to expand...
Click to collapse
Nice mate, @Mr Hofs is a real master
Maybe you can upload the OTA, firmware and recovery on mega.co.nz and post the links here: http://forum.xda-developers.com/showthread.php?t=2701376
Petert87 said:
Nice mate, @Mr Hofs is a real master
Maybe you can upload the OTA, firmware and recovery on mega.co.nz and post the links here: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
+1 @Mr Hofs certainly is!!!!! learned loads from that guy
Recovery VODAP110
Petert87 said:
Nice mate, @Mr Hofs is a real master
Maybe you can upload the OTA, firmware and recovery on mega.co.nz and post the links here: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
uploaded and posted on thread.
https:// mega.co.nz/#!24UliTKJ!b5h272Mwt5HS7sP9H6tiJTAS4lBFXu8iRRBqlYE6xd8
Good it worked.
raynordg said:
Hi Petert87 tried this one the other day but it didn't work for me.
Mr Hofs, You absolute legend. This was a very quick fix (No. 1) back up and running now.
Hi onkel.
the process i went through was as follows.
1) force download the OTA from swisscom and copy off to computer.
2) do what Mr Hofs said above and extract the ROM and dig out the recovery.img
3) reset with fast boot - (fastboot reboot-bootloader)
4) flash recovery (fastboot flash recovery recovery.img
5) fastboot erase cache
6) fastboot reboot
7) install OTA from within booted OS
8) wait.......
Thanks for taking the time to read through my problem guys.
@Mr Hofs if you would like the OTA update or recovery.mg please let me know.
Click to expand...
Click to collapse
THANKS !! Now it works ! My Problem was that I had the same recovery as you...
Back to stock problem
Hello,i have a similar problem. I did everthing as you,rooted,custom recovery and unlock bootloader on htcdev,all to try out custom roms like arhd and so on. But i didn't do a nandroid backup,because i'm a fool and didn't know what i was doing. When i wanted to go back to stock i tried flashing 3.29.161.9 as it's similar to our stock rom but had no luck,still no updates. When i go to fastboot my os says os-3.29.166.9,so clearly there lies i problem. i need i stock 3.29.166.9 nandroid backup so i can go to stock. i've downloaded the recovery you uploaded and put it in 3.29.161.9 rom but no luck. So can you please upload a 3.29.166.9 nandrod backup. Thanks in advance. And mister Petert87 and Mr Hofs if you have any idea how to solve my problem please tell can you tell me. Cheers guys
OTA Firmware
5.0.1 Swisscom firmware OTA
OTA_M8_UL_L50_SENSE60_MR_Vodafone_CH-DE(swisscom_only)_4.19.166.2-3.29.166.9_release_417015636rjn6nthj40isc.zip 659.7 MB
https:// mega.co.nz/#!r0UnlBRR!lfcnKjURWCaVd7ddTUQ-r80A475H81MH5i-eHp2MN0g
raynordg said:
5.0.1 Swisscom firmware OTA
OTA_M8_UL_L50_SENSE60_MR_Vodafone_CH-DE(swisscom_only)_4.19.166.2-3.29.166.9_release_417015636rjn6nthj40isc.zip 659.7 MB
https:// mega.co.nz/#!r0UnlBRR!lfcnKjURWCaVd7ddTUQ-r80A475H81MH5i-eHp2MN0g
Click to expand...
Click to collapse
No news about a nandroid backup?
in the same pickle
dexterts said:
No news about a nandroid backup?
Click to expand...
Click to collapse
Sorry to resurrect this thread, I would really appreciate if anyone could share a nandroid backup. Phone not working. I appreciate the OTA's you shared, but I am note sure how to proceed from there. Nandroid would help.
Thanks in advance.
adem_7 said:
Sorry to resurrect this thread, I would really appreciate if anyone could share a nandroid backup. Phone not working. I appreciate the OTA's you shared, but I am note sure how to proceed from there. Nandroid would help.
Thanks in advance.
Click to expand...
Click to collapse
No luck dude,no one who has the vodap110 cid is willing to post a nandroid backup. I've been searching for months
@ckpv5
Did you not have backups for x.xx.166.x, or am I mistaken?
adem_7 said:
Sorry to resurrect this thread, I would really appreciate if anyone could share a nandroid backup. Phone not working. I appreciate the OTA's you shared, but I am note sure how to proceed from there. Nandroid would help.
Thanks in advance.
Click to expand...
Click to collapse
Are you running a rooted stock ROM when your phone now not working ? If yes, can you install TWRP recovery and make backup of the system part only. Then upload it for me, I'll try to fix it. I've done this many times with other rare ROM like WIND, Taiwan version, Optus, Telstra and many more.
If possible, just PM me the link.. this is the only way that I can help you and @dexterts
EddyOS said:
@ckpv5
Did you not have backups for x.xx.166.x, or am I mistaken?
Click to expand...
Click to collapse
No. I don't have because I can't find any version nandroid for x.xx.166.x anywhere out of XDA
That's why I'm asking these guys to help them
And if that @raynordg guy respond to notification ... he can help too. He was scared about his data on nandroid backup ... system partition has no user data.
ckpv5 said:
Are you running a rooted stock ROM when your phone now not working ? If yes, can you install TWRP recovery and make backup of the system part only. Then upload it for me, I'll try to fix it. I've done this many times with other rare ROM like WIND, Taiwan version, Optus, Telstra and many more.
If possible, just PM me the link.. this is the only way that I can help you and @dexterts
No. I don't have because I can't find any version nandroid for x.xx.166.x anywhere out of XDA
That's why I'm asking these guys to help them
And if that @raynordg guy respond to notification ... he can help too. He was scared about his data on nandroid backup ... system partition has no user data.
Click to expand...
Click to collapse
Guys,one question. If i buy sunshine and s-off my m8,than i could change my cid and flash for example .401 firmware and get ota updates as my phone was a regular htc international model? Sorry for the off topic
dexterts said:
Guys,one question. If i buy sunshine and s-off my m8,than i could change my cid and flash for example .401 firmware and get ota updates as my phone was a regular htc international model? Sorry for the off topic
Click to expand...
Click to collapse
Yes ... change CID and flash EU WWE RUU if you want it on .401
If only firmware, you can restore a EU WWE backup and do OTA .. but for now only lollipop the latest and there's already lollipop RUU, you can check EddyOS thread for RUU method : http://forum.xda-developers.com/showthread.php?t=2735235

[Q] HTC M8 Wifi problems on several Roms -HELP!

I was hoping someone could help me with a problem I have.
My htc M8 was rooted and insertcoin was flashed onto it however the wifi button greyed out and wouldnt turn on in order to s-off it. I tried several different roms and they all have the same problem. I am currently running skydragon v5. I have been trying to sort this phone out for a week and I am getting absolutely nowhere so any help would be appreciated. It's on ORANG001 and is s-on.
Thanks
You have old firmware. You need to have 4.19.61.2 on ORANG001 in order to have wifi on these ROM.
And you post this in wrong section.
ckpv5 said:
You have old firmware. You need to have 4.19.61.2 on ORANG001 in order to have wifi on these ROM.
And you post this in wrong section.
Click to expand...
Click to collapse
Apologies, new to the forum it's been moved now!
Yeah .. requested it to be moved to correct section.
So .. you need to restore your stock ROM and do OTA up to 4.19.61.2
What's your current firmware version .. 3.33.61.9 or 2.26.61.1 ? Or even lower ?
Check what's written on bootloader - hboot 3.16 or 3.18 .. you need 3.19
ckpv5 said:
Yeah .. requested it to be moved to correct section.
So .. you need to restore your stock ROM and do OTA up to 4.19.61.2
What's your current firmware version .. 3.33.61.9 or 2.26.61.1 ? Or even lower ?
Check what's written on bootloader - hboot 3.16 or 3.18 .. you need 3.19
Click to expand...
Click to collapse
Hboot is 3.16.0.0000
The phone is currently in the bootloader and I can't get it to turn on to check the firmware version.
Ran getvar all does this help ? thanks for the help, I was stuck for over a week.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: **************
(bootloader) imei: ************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.206s
That's a very low version ... you need to restore to stock backup 1.54.61.5
But I deleted my TWRP backup for most 1.xx.xxx.x only keep 2.x; 3x & 4x
There is someone else backup made with Philz recovery so you need to download Philz recovery - http://forum.xda-developers.com/showthread.php?t=2703223
then download the backup : https://mega.co.nz/#!WhwRmSoJ!QJxmI0gYj7t_0Hc4fMKx0XLYQ2n45S3OfrEcDRS3C-s
restore that backup with the stock recovery (included in that backup if I'm not wrong)
then do multiple OTA
ckpv5 said:
That's a very low version ... you need to restore to stock backup 1.54.61.5
But I deleted my TWRP backup for most 1.xx.xxx.x only keep 2.x; 3x & 4x
There is someone else backup made with Philz recovery so you need to download Philz recovery - http://forum.xda-developers.com/showthread.php?t=2703223
then download the backup : https://mega.co.nz/#!WhwRmSoJ!QJxmI0gYj7t_0Hc4fMKx0XLYQ2n45S3OfrEcDRS3C-s
restore that backup with the stock recovery (included in that backup if I'm not wrong)
then do multiple OTA
Click to expand...
Click to collapse
I have Philz Touch 6.26.6 clockwork mod v6.0.4.8
Will this be okay or do i need to install a different one ? sorry if these questions are stupid.
Should be ok ... good luck
I'll check your progress tomorrow or maybe someone will help you later.
Time to sleep ... good night
ckpv5 said:
Should be ok ... good luck
I'll check your progress tomorrow or maybe someone will help you later.
Time to sleep ... good night
Click to expand...
Click to collapse
Okay cheers for your help!
I was trying to adb push the firmware to my phone to then install it on Recovery but when im typing "adb devices" it says list of devices attached then it is blank. I have been trying to search for solutions but I cant seem to fix it. If you have any advice it would be much appreciated. Thanks
Has anyone got an idea?
paulmcclafferty said:
I was trying to adb push the firmware to my phone to then install it on Recovery but when im typing "adb devices" it says list of devices attached then it is blank. I have been trying to search for solutions but I cant seem to fix it. If you have any advice it would be much appreciated. Thanks
Click to expand...
Click to collapse
This is usually an issue on the computer's side (PC?). Try to re-install HTC drivers, try another USB port, or another cable. Also, if you have USB 3.0, this is known to cause issues with adb connectivity (apparently, you can disable this).
Also, you need to be booted into OS or in recovery for adb to work (does not work in bootloader) and you need to have USB debugging activated in Settings.
And when you say "firmware" I think you mean a nandroid backup, based on the instructions previously given to you? Be careful using the term "firmware" here, as most folks use that term to specifically mean the firmware.zip that contains hboot, radio etc. (but not ROM).
paulmcclafferty said:
I was trying to adb push the firmware to my phone to then install it on Recovery but when im typing "adb devices" it says list of devices attached then it is blank. I have been trying to search for solutions but I cant seem to fix it. If you have any advice it would be much appreciated. Thanks
Click to expand...
Click to collapse
Don't you have a MicroSD ? Put the extracted nandroid on MicroSD at the right location clockworkmod\backups\ is easier than doing that ADB push.
Okay finally got the nandroid backup installed. Then when i tried to install the OTA update it took me to CWM and failed. So i then relocked and tried again to update OTA and it took me to the bootloader with a ***Relocked*** and *** Security Warning*** any ideas ?
You need to re-install the stock recovery in order to OTA. Bootloader lock has nothing to do with it (will OTA with unlocked bootloader).
redpoint73 said:
You need to re-install the stock recovery in order to OTA. Bootloader lock has nothing to do with it (will OTA with unlocked bootloader).
Click to expand...
Click to collapse
I have installed the Nandroid backup mentioned above to stock i believe. Is this the correct step or is this still not stock ? it was 1.54.61.5
Thanks
paulmcclafferty said:
I have installed the Nandroid backup mentioned above to stock i believe. Is this the correct step or is this still not stock ? it was 1.54.61.5
Thanks
Click to expand...
Click to collapse
Stock ROM backup and stock recovery are two different things.
You need to fastboot flash recovery recovery.img to replace the CWM that you have now. Inside the backup zip, there is a recovery.img .. take this out and fastboot flash it.
You need to unlock bootloader to flash it.
when using the command "fastboot flash recovery recovery.img" using the recovery.img from the unzipped nandroid folder the process runs and it says okay with no errors then when i try go into recovery the red triangle and exclamation mark appear again
paulmcclafferty said:
when using the command "fastboot flash recovery recovery.img" using the recovery.img from the unzipped nandroid folder the process runs and it says okay with no errors then when i try go into recovery the red triangle and exclamation mark appear again
Click to expand...
Click to collapse
Yes that's stock recovery. Perform the ota now
Because that is stock recovery. You don't need to get into recovery.
Just reboot, check OTA, download then select install.
Let the system do the installation on its own

Do I need S-OFF to fix loss of radio after being a bit stupid?

So, 6 months ago in my eagerness to get Oreo I flashed an Oreo rom over my functional LeeDroid Nougat installation. I can't remember the details of exactly what I did, but I ended up with my SIM card being recognised (it prompts me for the SIM unlock PIN), but it won't connect to the mobile network - I guess that means the 'loss of radio' problem.
OK, so I didn't heed the warnings and I was stupid But now I really want to get my beloved HTC 10 working again.
I've tried restoring TWRP backups from https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297, then re-flashing stock recovery, but end up in a boot loop.
I've tried the RUU Zip method - both using htc_fastboot.exe from a windows PC and by copying onto SD card and installing via download mode, with all of the HTC__0034 RUU Zip's but in all cases end up with various RU_ errors (19 RU_MAIN_VER_FAIL, 12 RU_ZIP_ERROR, 9 RU_SECURITY_FAIL etc)
One thing I can't work out is if I will need to install (and pay) for the sunshine app to get my phone to S-OFF?
And if some kind person could help me out and tell me exactly which downloads I need I would be eternally grateful
Code:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: xxxxxxxxx
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: xxxxxxxxxxxx
(bootloader) version-main: 3.16.401.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: HTC__034
This on definitely works. I know because it did for me.
https://www.androidfilehost.com/?fid=746010030569969175
I have the same cid, same firmware......flash by renaming it and via download mode.
2PS6IMG.zip is what to rename it to.
Mr Hofs said:
This on definitely works. I know because it did for me.
I have the same cid, same firmware......flash by renaming it and via download mode.
2PS6IMG.zip is what to rename it to.
Click to expand...
Click to collapse
Thanks for your answer. Which stock recovery did you use?
an_other_884 said:
Thanks for your answer. Which stock recovery did you use?
Click to expand...
Click to collapse
You don't need a stock recovery. It's flashed with the ruu. Not sure why you ask that?
Mr Hofs said:
You don't need a stock recovery. It's flashed with the ruu. Not sure why you ask that?
Click to expand...
Click to collapse
Ahh... right. I asked because I really have no idea what I'm doing! A little knowledge is dangerous!
Am going to try flashing the RUU later this evening.
Thanks
Mr Hofs said:
This on definitely works. I know because it did for me.
https://www.androidfilehost.com/?fid=746010030569969175
I have the same cid, same firmware......flash by renaming it and via download mode.
2PS6IMG.zip is what to rename it to.
Click to expand...
Click to collapse
OK, so I successfully flashed the zip (thanks for the tip!), but I still don't get mobile network connection
I also tried flashing 2.41.401.41--3.16.401.2_S-On_firmware.zip as on this page: https://forum.xda-developers.com/showpost.php?p=75262137&postcount=1761 - which flashed successfully but same problem.
(BTW I do get an IMEI number in settings->about, but that's always been OK)
Any ideas?
an_other_884 said:
OK, so I successfully flashed the zip (thanks for the tip!), but I still don't get mobile network connection
I also tried flashing 2.41.401.41--3.16.401.2_S-On_firmware.zip as on this page: https://forum.xda-developers.com/showpost.php?p=75262137&postcount=1761 - which flashed successfully but same problem.
(BTW I do get an IMEI number in settings->about, but that's always been OK)
Any ideas?
Click to expand...
Click to collapse
If you flashed the ruu and it succeeded its all pure stock, flashing a firmware won't help as its done with the ruu.
You can try to erase the persist partition
https://forum.xda-developers.com/htc-10/how-to/solution-imei-signal-downgrade-oreo-8-0-t3748999
Otherwise :
- check the simcard
- maybe hardware failure somehow (not sure how)
Mr Hofs said:
If you flashed the ruu and it succeeded its all pure stock, flashing a firmware won't help as its done with the ruu.
You can try to erase the persist partition
https://forum.xda-developers.com/htc-10/how-to/solution-imei-signal-downgrade-oreo-8-0-t3748999
Otherwise :
- check the simcard
- maybe hardware failure somehow (not sure how)
Click to expand...
Click to collapse
Hmmm... tried erasing the persist partition, but still no joy
So, if what I understand is correct paying $25 for Sunshine to set my S-ON to OFF and trying to revert back to Nougat probably won't help me either?
an_other_884 said:
Hmmm... tried erasing the persist partition, but still no joy
So, if what I understand is correct paying $25 for Sunshine to set my S-ON to OFF and trying to revert back to Nougat probably won't help me either?
Click to expand...
Click to collapse
Just thinking out loud, did you test the sim in another phone ? Just to confirm it works properly ?
There is a way to downgrade to nougat without s-off but it involves some knowledge about adb/fastboot and flashing several files. The guide is in the guides section. Have a read there.

Categories

Resources