i have a converted f180l to e975-20va official kitkat... is there a way to downgrade to jellybean again?
ive tried several ways but it always end up in 20va kitkat version..
i want to downgrade because i want to install artmod rom.
please help.
thanks in advance
Try using an e975 jelly bean kdz
itsdacj said:
Try using an e975 jelly bean kdz
Click to expand...
Click to collapse
ive tried 4.1.2 kdz of e975-20va it end up in kitkat... ive used the kdz updater from lgviet which is also can be found in this forum.
what flasher should i use? anybody tried downgrading?
kcuf12345 said:
ive tried 4.1.2 kdz of e975-20va it end up in kitkat... ive used the kdz updater from lgviet which is also can be found in this forum.
what flasher should i use? anybody tried downgrading?
Click to expand...
Click to collapse
Not sure if you made a typing error, but the 4.1.2 kdz is 10H, not 20va. There is another flasher available somewhere in the general forum, i think its called something like 'lg kdz flasher 2014'. If you can't find it, I'll link you to it.
itsdacj said:
Not sure if you made a typing error, but the 4.1.2 kdz is 10H, not 20va. There is another flasher available somewhere in the general forum, i think its called something like 'lg kdz flasher 2014'. If you can't find it, I'll link you to it.
Click to expand...
Click to collapse
thats the flasher ive used.. maybe your right sir.. ill find the 10H first.. thank you
does the 20h is compatible if i flash the artmod rom sir?? i have a 10f before with unlocked bootloader but unable to flash custom rom that has been made from 20a. will it work sir?
I'll upload it to somewhere and link you as soon as I wake up
EDIT: Just seen your edit lol, find the E97510H.kdz and use that. Just to make sure, use this flasher: http://www77.zippyshare.com/v/71932497/file.html and make sure CDMA is selected, your phone is in emergency mode and PhoneMode is CS_EMERGENCY, plus, do a CSE flash, not a NORMAL flash. I have to disable my internet to use this, make sure you do that. Good Luck.
itsdacj said:
I'll upload it to somewhere and link you as soon as I wake up
EDIT: Just seen your edit lol, find the E97510H.kdz and use that. Just to make sure, use this flasher: http://www77.zippyshare.com/v/71932497/file.html and make sure CDMA is selected, your phone is in emergency mode and PhoneMode is CS_EMERGENCY, plus, do a CSE flash, not a NORMAL flash. I have to disable my internet to use this, make sure you do that. Good Luck.
Click to expand...
Click to collapse
Sir... what is the base of your optimus G? is that 10H also?? i really wanted to try custom rom for a change.. thank you
By base do you mean operating system it came with? If so yes, it came with jelly bean, French 4.1.2 since it came from there for some reason. Anyway its fine to restore to 4.1.2, just download framaroot from a thread here at xda and use freegee from the play store.
Related
Please help me root and put cwm on my phone.
My current android version is 4.0.4 stock rom.
I am living here in the Philippines.
Hi slyzzz
you will need to revert your lu6200 back to gingerbread (stock firmware version 135), then follow the guide found on this forum to root and install cwm.
On stock 4.0.4 (i assume your are on software version of lu620161 (check your version under setting) you won't be able to root your phone depending on how you updated your phone.
n
I am now on 160. Could you give me the link to the thread? Cant actually find it.
slyzzz said:
Please help me root and put cwm on my phone.
My current android version is 4.0.4 stock rom.
I am living here in the Philippines.
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=1681886
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
For flashing the KDZ file you better use this version of updater, i already integrated the windows enabler in it. So no need to install / activate the windows enabler: https://www.dropbox.com/s/0x75ol8y4uwz69r/KDZ_FW_UPD_EN.rar
Make sure you are in USB debugging mode, or better close your phone... hold Volume up and power button. This get you into download mode and now you can start the update tool for flashing the KDZ file.
After install finished you root your phone: https://www.box.com/s/891052e09272fb345bc8
If root process finished you can bring CWM onto you phone: http://115.com/file/c26taagr#RecoveryNEW.zip
If all that is done, you should be able to flash any ICS custom ROM available for the moment.
Good luck and if you have more questions, let it out.
cannot download the KDZ
And here software KDZ:
http://www.mediafire.com/?wx6fr4v736wyutv
Click to expand...
Click to collapse
chuyennho184 said:
And here software KDZ:
Click to expand...
Click to collapse
THE KDZ file not the KDZ Installer
Karry025 said:
THE KDZ file not the KDZ Installer
Click to expand...
Click to collapse
You want to stock rom version 162. And here is the link:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGLU6200/ALGTBK/LU620162_00/LU620162_00.kdz
Click to expand...
Click to collapse
KDZ software is used to flash stock rom.
Need Engineer Version of 142
Cromson said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=1681886
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
For flashing the KDZ file you better use this version of updater, i already integrated the windows enabler in it. So no need to install / activate the windows enabler: https://www.dropbox.com/s/0x75ol8y4uwz69r/KDZ_FW_UPD_EN.rar
Make sure you are in USB debugging mode, or better close your phone... hold Volume up and power button. This get you into download mode and now you can start the update tool for flashing the KDZ file.
After install finished you root your phone: https://www.box.com/s/891052e09272fb345bc8
If root process finished you can bring CWM onto you phone: http://115.com/file/c26taagr#RecoveryNEW.zip
If all that is done, you should be able to flash any ICS custom ROM available for the moment.
Good luck and if you have more questions, let it out.
Click to expand...
Click to collapse
Hey Man,
I have been reading your posts in the whole forum regarding LTE LU6200 ... I want to get my hands on Engineer version but I can't seem to understand the Chinese even with translation. The site ain't giving me direct link... I think i need to get register on the site which requires a Chinese phone number ... which I dont' have... is there any way you could share this on dropbox? etc? coz I can't/dont' know how to download from 115.com :S
aatish said:
Hey Man,
I have been reading your posts in the whole forum regarding LTE LU6200 ... I want to get my hands on Engineer version but I can't seem to understand the Chinese even with translation. The site ain't giving me direct link... I think i need to get register on the site which requires a Chinese phone number ... which I dont' have... is there any way you could share this on dropbox? etc? coz I can't/dont' know how to download from 115.com :S
Click to expand...
Click to collapse
Hi,
i will upload it tonight on another filehoster, since i'm really busy now.
Cromson said:
Hi,
i will upload it tonight on another filehoster, since i'm really busy now.
Click to expand...
Click to collapse
Thank you very much!
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
Click to expand...
Click to collapse
so, if I flash this rom, then I no need to root,right ? so, please help make a other link, I can't download from this Chinese host. it's better if mediafire or other one.
Can somebody upload the CWM touch recovery image? I cant find it anywhere.
what is wrong with my lg f180l?? i just stock at 4.0.4.. whenever i update it to jellybean official 4.1.2 it always said service disabled.. i tried kdz and lg mobile support tool but still same.. but in 4.0.4.. everything is normal.. please help TIA!
can you still see your imei when you press *#06# ? you can try hard reset then flash again with kdz.. hope it helps
..
it has imei.. whenever i flash to to official f180l or e97510b EU i got no signal.. the solution is back to 4.0.4.. T_T
Same for me....
And I notice that you can read the imei only at the first boot after the upgrade, then, if you reboot again the phone, also the imei disappears...
It is a baseband problem, I guess...
..
pgdg71 said:
Same for me....
And I notice that you can read the imei only at the first boot after the upgrade, then, if you reboot again the phone, also the imei disappears...
It is a baseband problem, I guess...
Click to expand...
Click to collapse
yes thats it.. in this case i cant even convert it to e975 as i need because it must be in jellybean rom 1st T_T.. can somebody help up out.. thanks!
u need the base or is it the modem they call it for the F180L if u don't flash that too, ur phone won't work, that's how it is...
get the modem of the F180L and flash that afterwards ur E975 rom or what rom u use, they u should be able to get signal.
FreeGee got modems in zip so maybe u can use it: http://downloads.codefi.re/houstonn/lgog/modem
francisac3 said:
what is wrong with my lg f180l?? i just stock at 4.0.4.. whenever i update it to jellybean official 4.1.2 it always said service disabled.. i tried kdz and lg mobile support tool but still same.. but in 4.0.4.. everything is normal.. please help TIA!
Click to expand...
Click to collapse
Maybe you can enable all GSM bands dialing 5457#*180#....
I read that in Korea they disabled 2G.
puma99dk| said:
u need the base or is it the modem they call it for the F180L if u don't flash that too, ur phone won't work, that's how it is...
get the modem of the F180L and flash that afterwards ur E975 rom or what rom u use, they u should be able to get signal.
FreeGee got modems in zip so maybe u can use it: http://downloads.codefi.re/houstonn/lgog/modem
Click to expand...
Click to collapse
What program should I use to do the flash?
the file is in the format. zip
I have to rename it. kdz?
thanks
riconat said:
What program should I use to do the flash?
the file is in the format. zip
I have to rename it. kdz?
thanks
Click to expand...
Click to collapse
u can flash them through CWM or TRWP either of which u desire ^^
help
francisac3 said:
what is wrong with my lg f180l?? i just stock at 4.0.4.. whenever i update it to jellybean official 4.1.2 it always said service disabled.. i tried kdz and lg mobile support tool but still same.. but in 4.0.4.. everything is normal.. please help TIA!
Click to expand...
Click to collapse
have you got any success to solve this problem?
i 'm in same situation with my F180L
:crying:
>>>>> if you have any Stock based ICS for F180L with sms, GPRS, korean bloats fix ? kindly share it
Does anybody know where I can find a stock official 4.1.2 in ZIP form not kdz? For the E973. Yes I have used the "search" function. i want to be able to flash the stock os again from cwm.
keifer77 said:
Does anybody know where I can find a stock official 4.1.2 in ZIP form not kdz? For the E973. Yes I have used the "search" function.
Click to expand...
Click to collapse
Right HERE :good:
I was looking at that. Isnt that just the Korean version? I was kinda hoping to find the actual Canadian variant in zip form....I tried some of these roms and I feel weird saying this but the stock rom is pretty good!
keifer77 said:
I was looking at that. Isnt that just the Korean version? I was kinda hoping to find the actual Canadian variant in zip form....I tried some of these roms and I feel weird saying this but the stock rom is pretty good!
Click to expand...
Click to collapse
It's for the Canadian version E973...the file is about 666mb big.
But it has an issue, the wifi password always disappear once you reboot your device. Maybe something missing in the ''build.prop''.
If you can live with that...
I just prefer to install Stock firmware with official KDZ. But it's up-to-you
Maybe Ill just kdz the thing.....didnt want to have to reroot.
keifer77 said:
Maybe Ill just kdz the thing.....didnt want to have to reroot.
Click to expand...
Click to collapse
Then if you kdz, make sure you have a backup of your data, apps, etc you want to keep...kdz will wipe all of that. You've been warn!!
Noted, thanks again!
Hey,
I'm just wondering if someone can describe the process or send me a link on how to flash the Value Pack update for my e980. I know there is a post with the updated firmware, but you have to use LG flash tool, which I can't get to work. If it's possible, I'd like to CWM the update. I can't OTA the update because it keeps telling me that my device is not registered (I use T-Mobile). Thanks!
DyeLongJustice said:
Hey,
I'm just wondering if someone can describe the process or send me a link on how to flash the Value Pack update for my e980. I know there is a post with the updated firmware, but you have to use LG flash tool, which I can't get to work. If it's possible, I'd like to CWM the update. I can't OTA the update because it keeps telling me that my device is not registered (I use T-Mobile). Thanks!
Click to expand...
Click to collapse
There is NO flashable zip you will HAVE to use LG Flashtools. Try another computer.
hyelton said:
There is NO flashable zip you will HAVE to use LG Flashtools. Try another computer.
Click to expand...
Click to collapse
Is there a good guide for this? The thread that has the flashable files is kind of confusing. I'm not fully sure how to do it, and am kind of afraid to mess up my phone. Thanks!
The value update .tot file for use with lgflashtools was posted by thecubed, download that. And also go to the fix soft brick thread and download the files there. Use that guide to flash the value pack .tot instead of the regular stock .tot file.
It will say it failed but as long as your phone is booted up and running(which it will be), you should be good to go.
Sent from my LG-E980 using XDA Premium 4 mobile app
how to flash 4.4.2 kdz file to e988???? plz help
you can flash f240KDZ to e988
if you did that would there be any issues with hardware and stuff because i have a e988 and really want kitkat but i will only want to use it if its fully functional, so has anyone tried it?
riki126 said:
if you did that would there be any issues with hardware and stuff because i have a e988 and really want kitkat but i will only want to use it if its fully functional, so has anyone tried it?
Click to expand...
Click to collapse
Backup your rom and flash the SpheniX 4.4.2 V1.0 (Posted in the development section) followed by flashing your baseband. if something goes wrong you can always come back to your previous rom via recovery img.
ok thanks bro!
Root is necessary?
lengyue said:
you can flash f240KDZ to e988
Click to expand...
Click to collapse
Sorry to ask ... the phone has to be rooted to flash the kdz file? I'm asking because I did DL THE 1.6GB FILE for my F240S. I know, 4.4.2 is available via OTA, but that doesn't work on mine. It just crashes after downloading a few MB's of the 727mb file.. Nope. It's not rooted. Stock ROM 4.1.2.
Thank you