Related
Please help me root and put cwm on my phone.
My current android version is 4.0.4 stock rom.
I am living here in the Philippines.
Hi slyzzz
you will need to revert your lu6200 back to gingerbread (stock firmware version 135), then follow the guide found on this forum to root and install cwm.
On stock 4.0.4 (i assume your are on software version of lu620161 (check your version under setting) you won't be able to root your phone depending on how you updated your phone.
n
I am now on 160. Could you give me the link to the thread? Cant actually find it.
slyzzz said:
Please help me root and put cwm on my phone.
My current android version is 4.0.4 stock rom.
I am living here in the Philippines.
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=1681886
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
For flashing the KDZ file you better use this version of updater, i already integrated the windows enabler in it. So no need to install / activate the windows enabler: https://www.dropbox.com/s/0x75ol8y4uwz69r/KDZ_FW_UPD_EN.rar
Make sure you are in USB debugging mode, or better close your phone... hold Volume up and power button. This get you into download mode and now you can start the update tool for flashing the KDZ file.
After install finished you root your phone: https://www.box.com/s/891052e09272fb345bc8
If root process finished you can bring CWM onto you phone: http://115.com/file/c26taagr#RecoveryNEW.zip
If all that is done, you should be able to flash any ICS custom ROM available for the moment.
Good luck and if you have more questions, let it out.
cannot download the KDZ
And here software KDZ:
http://www.mediafire.com/?wx6fr4v736wyutv
Click to expand...
Click to collapse
chuyennho184 said:
And here software KDZ:
Click to expand...
Click to collapse
THE KDZ file not the KDZ Installer
Karry025 said:
THE KDZ file not the KDZ Installer
Click to expand...
Click to collapse
You want to stock rom version 162. And here is the link:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGLU6200/ALGTBK/LU620162_00/LU620162_00.kdz
Click to expand...
Click to collapse
KDZ software is used to flash stock rom.
Need Engineer Version of 142
Cromson said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=1681886
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
For flashing the KDZ file you better use this version of updater, i already integrated the windows enabler in it. So no need to install / activate the windows enabler: https://www.dropbox.com/s/0x75ol8y4uwz69r/KDZ_FW_UPD_EN.rar
Make sure you are in USB debugging mode, or better close your phone... hold Volume up and power button. This get you into download mode and now you can start the update tool for flashing the KDZ file.
After install finished you root your phone: https://www.box.com/s/891052e09272fb345bc8
If root process finished you can bring CWM onto you phone: http://115.com/file/c26taagr#RecoveryNEW.zip
If all that is done, you should be able to flash any ICS custom ROM available for the moment.
Good luck and if you have more questions, let it out.
Click to expand...
Click to collapse
Hey Man,
I have been reading your posts in the whole forum regarding LTE LU6200 ... I want to get my hands on Engineer version but I can't seem to understand the Chinese even with translation. The site ain't giving me direct link... I think i need to get register on the site which requires a Chinese phone number ... which I dont' have... is there any way you could share this on dropbox? etc? coz I can't/dont' know how to download from 115.com :S
aatish said:
Hey Man,
I have been reading your posts in the whole forum regarding LTE LU6200 ... I want to get my hands on Engineer version but I can't seem to understand the Chinese even with translation. The site ain't giving me direct link... I think i need to get register on the site which requires a Chinese phone number ... which I dont' have... is there any way you could share this on dropbox? etc? coz I can't/dont' know how to download from 115.com :S
Click to expand...
Click to collapse
Hi,
i will upload it tonight on another filehoster, since i'm really busy now.
Cromson said:
Hi,
i will upload it tonight on another filehoster, since i'm really busy now.
Click to expand...
Click to collapse
Thank you very much!
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
Click to expand...
Click to collapse
so, if I flash this rom, then I no need to root,right ? so, please help make a other link, I can't download from this Chinese host. it's better if mediafire or other one.
Can somebody upload the CWM touch recovery image? I cant find it anywhere.
Hi there folks
I rooted my LGOG with the motochopper method and it gave me a lovely rooted device.
Then i decided to install Rom Manager and grant it super user acces.
When i rebooted after the rom manager had downloaded the recovery files it got stuck at
"secure booting error!"
Cause : boot certification verify
My problem now is ive got all the tutorial files found in this http://forum.xda-developers.com/showthread.php?t=2010624 post, but the original firmware program doesn't connect to the lg servers with my model number and IMEI.
Could someone with an E975 help me with a stock kdz so i can save whats left of the brick, it can stil do download mode etc and switch off.
Thanks in advance
i heave same problem.nothing ist lost.dont panic.i heave this kdz file atvhome.you must fladh overit and the phone will boot up normal.when i come home i will upload this file to my dropbox.that will hapen in 30minutes.greatings
rkajtn said:
i heave same problem.nothing ist lost.dont panic.i heave this kdz file atvhome.you must fladh overit and the phone will boot up normal.when i come home i will upload this file to my dropbox.that will hapen in 30minutes.greatings
Click to expand...
Click to collapse
Dude you are a legend.
hay here heave you all roms for optimus G.i was deleting my rom from desktop.
http://allphonefirmwares.blogspot.com/2013/06/official-stock-lg-optimus-g-firmware-rom.html
and you need latest lg kdz flash tool.
http://www.lg-phones.org/how-to-return-fix-a-bricked-lg-optimus-g-back-to-stock.html
greatings.
in kdz fw updater you must leave diag NOT to change to recovery mode.
for me it works.and all things stay on there posts.
Hi,
I am from India and trying to download kdz file from the link but the link is down can anyone help here.
lgmobile.com/LGE975/AINDBL/E97510C_00/E97510C_00.kdz
Sent from my LG-E975 using Tapatalk 2
yusuf00786 said:
Hi,
I am from India and trying to download kdz file from the link but the link is down can anyone help here.
Sent from my LG-E975 using Tapatalk 2
Click to expand...
Click to collapse
PM'd
Here you GO
http://www.lg-phones.org/official-stock-lg-optimus-g-firmware-rom.html
Well, maybe you will not get errors next time if you UNLOCK THE BOOTLOADER.Only rooting is not enough. You need root to be able to use FREEGEE,to unlock the bootloader. Unlocking the bootloader with freegee will also flash CWM recovery or TWRP, depending on your choice.
See what happens when you don't document yourself properly before trying to do things?
All is fine now, i couldn't download the KDZ since i edited my host file when flashing the L9 two months back.
Im waiting on the freegee support now. cheers
Ok I have looked and looked and I cannot find a solution for this. My G2 is booting straight into TWRP after the OTA and I cannot get it back. I can get it into download mode but it just sits there at 0% not doing anything. The method for fixing it using TWRP's terminal command mode did not work it just told me that there was not enough space on the device. Should I just smash the screen and take it back to Best Buy to get it replaced since its insured or what? I'm at my wit's end here.
schmadam said:
Ok I have looked and looked and I cannot find a solution for this. My G2 is booting straight into TWRP after the OTA and I cannot get it back. I can get it into download mode but it just sits there at 0% not doing anything. The method for fixing it using TWRP's terminal command mode did not work it just told me that there was not enough space on the device. Should I just smash the screen and take it back to Best Buy to get it replaced since its insured or what? I'm at my wit's end here.
Click to expand...
Click to collapse
Do you have a backup? If you don't have a ROM maybe push a ROM into recovery then flash.....could also flash stock using lg support too
RubbleTea said:
Do you have a backup? If you don't have a ROM maybe push a ROM into recovery then flash.....could also flash stock using lg support too
Click to expand...
Click to collapse
How do I use the lg support tool?
Sent from my LG-LS980 using XDA Premium 4 mobile app
Demonlinx said:
How do I use the lg support tool?
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its in the general forum under back to stock use sprint files and Verizon method......
fix for TWRP (Teamwin Recovery) boot loop on Sprint LG-LS980
So I did the same thing, I was down for 2 days when I accepted the OTA update, see (attached screenshot)
I followed the exact instructions for this Verizon only thread, but instead of using the Verizon restore file (.tot) I used the
Here's the thread: http://forum.xda-developers.com/showthread.php?p=45694605#post45694605
Sprint one.
I got the Sprint link from this thread: http://forum.xda-developers.com/showthread.php?t=2432476
the direct link is here: http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
Just follow the instructions including replacing the megalock.dll file. If, not you will be asked to authenticate running the LG Flash Tool.
Also, I got a error message that screwed me for about a day because I had a bad LGVS980_20130902_LGFLASHv151.dll file. (see 2nd attachment for the error)
Hope this helps you and others!
TAGS: [Production] - LS980ZV7_01_to_ZV8_13
OTA
BIN Model is different!
Check DLL or BIN File!
badkarmah187 said:
So I did the same thing, I was down for 2 days when I accepted the OTA update, see (attached screenshot)
I followed the exact instructions for this Verizon only thread, but instead of using the Verizon restore file (.tot) I used the
Here's the thread: http://forum.xda-developers.com/showthread.php?p=45694605#post45694605
Sprint one.
I got the Sprint link from this thread: http://forum.xda-developers.com/showthread.php?t=2432476
the direct link is here: http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
Just follow the instructions including replacing the megalock.dll file. If, not you will be asked to authenticate running the LG Flash Tool.
Also, I got a error message that screwed me for about a day because I had a bad LGVS980_20130902_LGFLASHv151.dll file. (see 2nd attachment for the error)
Hope this helps you and others!
TAGS: [Production] - LS980ZV7_01_to_ZV8_13
OTA
BIN Model is different!
Check DLL or BIN File!
Click to expand...
Click to collapse
Thanks man! I got stuck in a TWRP bootloop after the update. Had to use this method to restore phone and end the TWRP bootloop.
Anyone else on Sprint: use the above instructions just make sure to use the LGLS980_20130904_LGFLASHv151.dll not the LSVS file.
This instruction might help.
http://forum.xda-developers.com/showthread.php?t=2569237
Sent from my LG-LS980 using xda premium
glad to help
codest3r said:
Thanks man! I got stuck in a TWRP bootloop after the update. Had to use this method to restore phone and end the TWRP bootloop.
Anyone else on Sprint: use the above instructions just make sure to use the LGLS980_20130904_LGFLASHv151.dll not the LSVS file.
Click to expand...
Click to collapse
I'm glad I was able to help someone! took me about 5 minutes to write these instructions. lol
http://forum.xda-developers.com/showthread.php?t=2656275
This will work for Sprint LG G2 as long as you can get into Download Mode
badkarmah187 said:
So I did the same thing, I was down for 2 days when I accepted the OTA update, see (attached screenshot)
I followed the exact instructions for this Verizon only thread, but instead of using the Verizon restore file (.tot) I used the
Here's the thread: http://forum.xda-developers.com/showthread.php?p=45694605#post45694605
Sprint one.
I got the Sprint link from this thread: http://forum.xda-developers.com/showthread.php?t=2432476
the direct link is here: http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
Just follow the instructions including replacing the megalock.dll file. If, not you will be asked to authenticate running the LG Flash Tool.
Also, I got a error message that screwed me for about a day because I had a bad LGVS980_20130902_LGFLASHv151.dll file. (see 2nd attachment for the error)
Hope this helps you and others!
TAGS: [Production] - LS980ZV7_01_to_ZV8_13
OTA
BIN Model is different!
Check DLL or BIN File!
Click to expand...
Click to collapse
i am too getting the same issue...
if u get any solution plz revert
thank you
---------- Post added at 12:33 PM ---------- Previous post was at 12:06 PM ----------
badkarmah187 said:
So I did the same thing, I was down for 2 days when I accepted the OTA update, see (attached screenshot)
I followed the exact instructions for this Verizon only thread, but instead of using the Verizon restore file (.tot) I used the
Here's the thread: http://forum.xda-developers.com/showthread.php?p=45694605#post45694605
Sprint one.
I got the Sprint link from this thread: http://forum.xda-developers.com/showthread.php?t=2432476
the direct link is here: http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
Just follow the instructions including replacing the megalock.dll file. If, not you will be asked to authenticate running the LG Flash Tool.
Also, I got a error message that screwed me for about a day because I had a bad LGVS980_20130902_LGFLASHv151.dll file. (see 2nd attachment for the error)
Hope this helps you and others!
TAGS: [Production] - LS980ZV7_01_to_ZV8_13
OTA
BIN Model is different!
Check DLL or BIN File!
Click to expand...
Click to collapse
I brricked my phone LG G2 Sprint and now i am in trouble ...phone not booting..
only i get the sideload via Recovery mode...
need a Recovery TWRP/CWM any...
and the way to flash the Recovery...
as i have changed the build.prop's setting
ro.build.target_operators= SPR
to
ro.build.target_operators= OPEN
and restarted it and then ..the ENd.
phone not starting...
tried to use LG Flash TOOL the .dll and .tot downloaded of Sprint
but the error comes for dll as i have changed build.prop to OPEN
so that LG FLASH TOOL is also not working..
figured out the solution but the way for these solution is still far...
just need the WAY for the solution..
Solution : Need to Replace the build.prop(OPEN) which is edited ONE ----> to-----> Original build.prop(SPR) [so that can use your said procedure]
if can't replace then should be able to edit the OPEN to SPR again
Only the things can work thru SIDELOAD only.
Also need a way to flash the Recovery in LG G2 SPRINT (so as to push or edit the build.prop) that to via SIDELOAD
The WAY : ? ? ? ? ? ? ?
?? ? ? ?? ? ?
(It's Really a Milky Way) {UNSEEN}
Please Help.
[email protected] said:
i am too getting the same issue...
if u get any solution plz revert
thank you
---------- Post added at 12:33 PM ---------- Previous post was at 12:06 PM ----------
I brricked my phone LG G2 Sprint and now i am in trouble ...phone not booting..
only i get the sideload via Recovery mode...
need a Recovery TWRP/CWM any...
and the way to flash the Recovery...
as i have changed the build.prop's setting
ro.build.target_operators= SPR
to
ro.build.target_operators= OPEN
and restarted it and then ..the ENd.
phone not starting...
tried to use LG Flash TOOL the .dll and .tot downloaded of Sprint
but the error comes for dll as i have changed build.prop to OPEN
so that LG FLASH TOOL is also not working..
figured out the solution but the way for these solution is still far...
just need the WAY for the solution..
Solution : Need to Replace the build.prop(OPEN) which is edited ONE ----> to-----> Original build.prop(SPR) [so that can use your said procedure]
if can't replace then should be able to edit the OPEN to SPR again
Only the things can work thru SIDELOAD only.
Also need a way to flash the Recovery in LG G2 SPRINT (so as to push or edit the build.prop) that to via SIDELOAD
The WAY : ? ? ? ? ? ? ?
?? ? ? ?? ? ?
(It's Really a Milky Way) {UNSEEN}
Please Help.
Click to expand...
Click to collapse
> Just changed the desktop or laptop on which I was performing the operations...
> .
> And performed same operations / procedures to the device.
It worked..
The thing is that while installing devices drivers n stuffs
Sometimes some file are skipped unknowingly.
But again if u reinstall on same device without formatting then the issue remains unchanged.
So for that reason u should either format the OS n perform the said things/procedure.
Or just switch the computer or laptop to other.
Just Simply works...
It's like digging a mountain n getting an ant...
[email protected] said:
i am too getting the same issue...
if u get any solution plz revert
thank you
---------- Post added at 12:33 PM ---------- Previous post was at 12:06 PM ----------
I brricked my phone LG G2 Sprint and now i am in trouble ...phone not booting..
only i get the sideload via Recovery mode...
need a Recovery TWRP/CWM any...
and the way to flash the Recovery...
as i have changed the build.prop's setting
ro.build.target_operators= SPR
to
ro.build.target_operators= OPEN
and restarted it and then ..the ENd.
phone not starting...
tried to use LG Flash TOOL the .dll and .tot downloaded of Sprint
but the error comes for dll as i have changed build.prop to OPEN
so that LG FLASH TOOL is also not working..
figured out the solution but the way for these solution is still far...
just need the WAY for the solution..
Solution : Need to Replace the build.prop(OPEN) which is edited ONE ----> to-----> Original build.prop(SPR) [so that can use your said procedure]
if can't replace then should be able to edit the OPEN to SPR again
Only the things can work thru SIDELOAD only.
Also need a way to flash the Recovery in LG G2 SPRINT (so as to push or edit the build.prop) that to via SIDELOAD
The WAY : ? ? ? ? ? ? ?
?? ? ? ?? ? ?
(It's Really a Milky Way) {UNSEEN}
Please Help.
Click to expand...
Click to collapse
Do not be afraid
Your friend just come
I changed my build prop on android 4.4.2 with root
No twrp
No adb
No fastboot
Get error different model with lg flash too
Get error with lg mobile support tool
I got model name GT-N7100 on my LG-D802 lol.......
It is 100% bricked ????
Any help
Any ........
Please help !!
stock rom
stock recovery
got spark update
and then
rooted >>> it was OK
changed my build prop on windows and put it back again
restart
stock recovery >>> OK
download mode >>> OK
BUT
stuck on LG logo
No adb
connected as charge only
Get error <different model> with lg flash tool
tried ZV7.tot and ZV8.tot with no luck !
i think i need
ZVA.to OR
original OTA ZIP file to flash with <adb sideload ota.zip>
nashwannose said:
stock rom
stock recovery
got spark update
and then
rooted >>> it was OK
changed my build prop on windows and put it back again
restart
stock recovery >>> OK
download mode >>> OK
BUT
stuck on LG logo
No adb
connected as charge only
Get error <different model> with lg flash tool
tried ZV7.tot and ZV8.tot with no luck !
i think i need
ZVA.to OR
original OTA ZIP file to flash with <adb sideload ota.zip>
Click to expand...
Click to collapse
My problem have fix
Here you go
http://forum.xda-developers.com/showthread.php?t=2680910
Use dll from your kdz and flash with your tot file
If your model are not with kdz format u can use dll from d802 kdz file
Just use kdz extractor and extractor LGUp_XXXX dll from YOUR kdz
Good luck
[guide] install at&amp;t kitkat e980 stock flash + root + recovery - complete wipe !
FOR AT&T LG E980:
Basically, from my experience I put together this guide for anyone who wishes to flash a complete stock AT&T KitKat from .TOT file and the root and add recovery.
All the steps are what I have gathered from around the forums, SO I WILL GIVE CREDIT FOR STEPS THAT ARE OUTLINED BY OTHERS. These people helped by their postings.
FLASHING TOT FILES:
1. The BEST - I think a lot of us can agree - thread for the LG E980 flashing with STOCK firmware is this by HYELTON http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1
STOP OVER THERE AND GIVE THE MAN SOME LOVE AND THANKS !!!!
.TOT files and .Kdz files for all versions can be found at Hyelton's thread above. Also, more details for flashing .TOT vs .Kdz files there. Below is some tips from my experience.
Here is the exact TOT file I used: http://www.mediafire.com/download/djjmck2eost77e3/BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0.tot
SOME OF MY TIPS: FROM MY EXPERIENCES
2. The only hitch is getting LGFlash Tools and hacking it. I tried the links on Hyelton’s thread but some are now too new to be hackable. For example, one must find the reg key for the new version of LGTools he links to. Megalock.dll is hit-or-miss. There are other ways for sure but I did not bother further.
3. I found that lower versions of LG Flash Tool (v 1.4.1330R) works just fine.
EDIT: The latest version of LG Flash Tools is here http://www.mediafire.com/download/6g1uyoz2zsiqq1c/LG+Phone+Flash+Stuff.rar
And it contains the DLL to be used during flashing. I STRONGLY SUGGEST USING THIS. You MUST -MUST- TURN OFF INTERNET WHEN USING FLASH TOOLS. This pack contains the full software, and dll files. I have flashed using just this package >10 times at least while testing roms
a.Connect phone and let Windows install drivers. In my case, Windows 8 default were just fine.
b.Put your phone in download mode.
c.Connect it to your computer. In case of windows 8 the windows default drivers work fine.
d.Follow Hyelton’s steps.
EDIT: See posts #32and #33 in this thread. Do not go back to download. But wait for fastboot to install. See post #33 for this. Just wait patiently, the phone will reboot to full normal mode/setup screen, then the LG tools will say pass. BE VERY PATIENT.
ROOTING AND RECOVERY:
ROOTING:
THANKS TO jarari2:
1.This method here works just fine: http://forum.xda-developers.com/showthread.php?t=2699067
Simple bat file method. Turn ON USB Debugging before trying.
2.RECOVERY:
THANKS TO hoangnova AT http://lgviet.com/forum/threads/moi-thu-ve-lg-g-pro-4-4-2-root-recovery-kdz.14841/
** Download and move following file to phone.
** https://docs.google.com/file/d/0B4vSbKccbcIOV1NjMDlqWUdmVm8/edit?pli=1
OR
** https://onedrive.live.com/redir?resid=1F371A0EDB2BC3A6!107
** Run apk. Done.
You should have a full stock KitKat + Rooted + Recovery… Enjoy!!
If this guide helped you, you can buy me a beer/coffee or any such wonderful drink.
chappatti said:
FOR AT&T LG E980:
...
If this guide helped you, you can buy me a beer/coffee or any such wonderful drink.
Click to expand...
Click to collapse
The download on the google drive says it's non-existent.
Nice guide. Thanks!
jdk2 said:
The download on the google drive says it's non-existent.
Edit: Here's the file: http://forum.xda-developers.com/attachment.php?attachmentid=2715141&d=1398757138
Click to expand...
Click to collapse
THANKS ! Fixed !!
Where can I find the .TOT file?
ducktat said:
Where can I find the .TOT file?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1
ducktat said:
Where can I find the .TOT file?
Click to expand...
Click to collapse
I decided to just link directly to the actual TOT file I used.....!
Link in OP.
Roots Perfectly
Upgraded to KK 4.4.2 via OTA and rooted follow the directions contained here and every worked perfectly! Thanks for gathering the information!
MDMTahiti said:
Upgraded to KK 4.4.2 via OTA and rooted follow the directions contained here and every worked perfectly! Thanks for gathering the information!
Click to expand...
Click to collapse
No Problem.
To do the OTA I guess you went back to complete stock ? Yeah, that is a good option too....! Only, it requires one extra flash (going back to stock!)
Just for info, can you please add the steps to your post.
Thanks.
Where to download AT&T kitkat upgrade ?
lchen5 said:
Where to download AT&T kitkat upgrade ?
Click to expand...
Click to collapse
In the OP and in my thread
hyelton said:
In the OP and in my thread
Click to expand...
Click to collapse
Hey, hyelton, thanks for visiting,,!
The steps
chappatti said:
No Problem.
To do the OTA I guess you went back to complete stock ? Yeah, that is a good option too....! Only, it requires one extra flash (going back to stock!)
Just for info, can you please add the steps to your post.
Thanks.
Click to expand...
Click to collapse
I went back to pure stock and no custom recovery, then did the 10p update - I found that the update to 10p would not work with other than stock recovery. I then just used the settings query for OTA update, downloaded and installed - all my programs and data were intact after the update, except apps requiring root would not run correctly. I then followed your steps to root. I still have the stock recovery at this point. KitKat runs great.
MDMTahiti said:
I went back to pure stock and no custom recovery, then did the 10p update - I found that the update to 10p would not work with other than stock recovery. I then just used the settings query for OTA update, downloaded and installed - all my programs and data were intact after the update, except apps requiring root would not run correctly. I then followed your steps to root. I still have the stock recovery at this point. KitKat runs great.
Click to expand...
Click to collapse
So when going back to complete stock the 10p, how did you keep apps, settings if you used odin.? Just interested in your procedure since obviously OTA on stock will retain programs and settings.
It just worked...
chappatti said:
So when going back to complete stock the 10p, how did you keep apps, settings if you used odin.? Just interested in your procedure since obviously OTA on stock will retain programs and settings.
Click to expand...
Click to collapse
Honestly, I don't know. I had been flashing lots of different ROMS and then went back the total day 1 stock. I then updated OTA to 10p a couple of months ago and rooted but did not flash a custom recovery. I then heard that 4.4.2 was available, checked via the about link and downloaded. All the apps and data stayed in place. I then rooted and have yet to flash a custom recovery. I'm sorry I can't give you more detail. But I can tell you that I seem to have better battery life, and I had to pair my phone to my car again. Good luck.
i miss network connection
hi, i follow your steps, and it worked, i have KK now on my e980.
but... sometimes i lost my network connection, and it returns in a minute or two
any ideas?
With the recovery installed from this thread. Can we flash non stock custom roms or just stock roms.
Sent from my HTC One using XDA Premium 4 mobile app
Problems flashing.
Hey! I can't flash the .TOT, the Flash Tool doesn't recognize port COM41, or any other. I go to device administrator, and there's my phone as port 41, but the Flashing Tool doesn't. Any ideas?!
Ink Rampant Wolf said:
Hey! I can't flash the .TOT, the Flash Tool doesn't recognize port COM41, or any other. I go to device administrator, and there's my phone as port 41, but the Flashing Tool doesn't. Any ideas?!
Click to expand...
Click to collapse
Here is the detailed thread for using Lg flash tool. Http://forum.gsmhosting.com/vbb/f17...flashv141-free-no-need-b2b-user-pass-1628819/
I guess you changed yiu computer date and time before using it as mentioned in OP??
Also what Rom are you coming from? Is your bootloader unlocked/lokified?
Can you guys help me out? I already rooted using towelroot. Is it possible to just install the apk for recovery without doing the other steps?
Sent from my Nexus 5 using Tapatalk
Jacob030 said:
Can you guys help me out? I already rooted using towelroot. Is it possible to just install the apk for recovery without doing the other steps?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I have not used towelroot ever. BUT, I do not see why you cannot add a recovery irrespective of root method. I have done this mtself.
Sent from my GT-N8013 using XDA Free mobile app
Any safe root for H815 V10b-SEA variant??
Is there any easy root for H815 SEA (Singapore) variant?
Dont want to unlock my bootloader. Cant find any thread for H815 SEA please help
Same here.. H815sea version no updates no easy root
Sent from my LG-H815 using Tapatalk
miyuru4u said:
Same here.. H815sea version no updates no easy root
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Thats really sad im still waiting to root my phone. But support for H815 SEA is very low :crying::crying:
I have a Taiwanese version...I have root. I wanted a different rom as well so I installed MS7's rom here: http://forum.xda-developers.com/g4/development/h815-eu-l-p-t-sea-twn-t3176195
Pretty sure you can root that model check the easy root method. Im on H185T Australian and have root
Sent from my LG-H815 using Tapatalk
But i need confirmation from a SEA variant holder.
Sent from my LG-H815
As I understand it the low effort root works with the SEA variant. Is there any downsides to flashing the EU image on the SEA device?
I'm a SEA variant holder here.
It's fine, you can use the Low Effort Root method. You can also flash the EU open KDZ without any problem.
You lose VoLTE, but to me it doesn't matter so I don't really care.
I'm running the latest 10E ATM, and it's much much better than 10B, so flash away.
If you don't want to loose anything you have to inject root yourself. You need linux for this.
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
This guide describes how to backup your system partition to an img file.
Then you have to use linux to inject root. You will get a rooted img file.
You can then copy the file back to your system partition.
If you want to check your "dd" parameters, you can use my guide to calculate your values:
http://forum.xda-developers.com/g4/help/how-to-determine-dd-parameters-lg-g4-t3184867
IMPORTANT:
Backup your files before doing this steps!
If you don't know what you are doing, wait for someone else to do it.
Download the kdz for your phone, so you can flash the stock rom if it doesn't work.
Do you have some experience with linux?
SEA Variant user here. Singapore set also. No issues when flashing in regards to rooting part.
If you just want to root, you could just take up flashing either via the Low Effort Root, or you could go for alternatives like the rooted system image that I have created or others, but make sure they are using EU OPEN KDZ in case of conflicting basebands and such.
And if you are going to upgrade to 10d/10e, I'd suggest downloading the KDZ, normal flash it, so that you can get your baseband and kernel updated before flashing the root image of your choice.
Indicious Flow said:
SEA Variant user here. Singapore set also. No issues when flashing in regards to rooting part.
If you just want to root, you could just take up flashing either via the Low Effort Root, or you could go for alternatives like the rooted KDZ that I have created or others, but make sure they are using EU OPEN KDZ in case of conflicting basebands and such.
And if you are going to upgrade to 10d/10e, I'd suggest downloading the KDZ, normal flash it, so that you can get your baseband and kernel updated before flashing the root image of your choice.
Click to expand...
Click to collapse
How did you create a rooted kdz?
Is there a guide or a tool to do this?
dominik-p said:
How did you create a rooted kdz?
Is there a guide or a tool to do this?
Click to expand...
Click to collapse
Go look it up at the General page
Over here! -> http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
I am still at V10b
Keeping trying to see if any update available every day but nothing . I am "still using the latest version" the update center says.
When did you get the update please?
Aoi_sora9x said:
I'm running the latest 10E ATM, and it's much much better than 10B, so flash away.
Click to expand...
Click to collapse
Indicious Flow said:
Go look it up at the General page
Over here! -> http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
Click to expand...
Click to collapse
This is not a how to root a kdz.
This is how to root the system.img.
I know the guide.
http://forum.xda-developers.com/showpost.php?p=62704051&postcount=9
I think you know what the difference is?
The kdz is a packed file which contains system, modem, boot,... files.
The system.img is an raw image of the system partition.
To root a kdz, you had to unpack it, inject root, repack it, create new checksums,....
That's a complex precess...
So I guess you don't know how to root a kdz?
---------- Post added at 05:25 PM ---------- Previous post was at 05:11 PM ----------
mic141414 said:
I am still at V10b
Keeping trying to see if any update available every day but nothing . I am "still using the latest version" the update center says.
When did you get the update please?
Click to expand...
Click to collapse
You can download the latest version as a kdz.
Use this link and enter your IMEI:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
You will get a download link.
Type
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
instead of
pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=
to download the file.
Then you can use the LG Flash Tool to flash the kdz to your phone.
You will loose root. Don't know if you have root.
You will have to root you phone again, but with the appropriate system img.
(Or inject root yourself...)
Thank you
I tried and I got "/H81510B_00.kdz"
Same as what i have now
???
I don't have root yet anyway but wanted the latest os available.
Don't know why the latest does not appear
dominik-p said:
---------
You will get a download link.
Type
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
instead of
pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=
to download the file.
Then you can use the LG Flash Tool to flash the kdz to your phone.
You will loose root. Don't know if you have root.
You will have to root you phone again, but with the appropriate system img.
(Or inject root yourself...)
Click to expand...
Click to collapse
dominik-p said:
This is not a how to root a kdz.
This is how to root the system.img.
I know the guide.
http://forum.xda-developers.com/showpost.php?p=62704051&postcount=9
I think you know what the difference is?
The kdz is a packed file which contains system, modem, boot,... files.
The system.img is an raw image of the system partition.
To root a kdz, you had to unpack it, inject root, repack it, create new checksums,....
That's a complex precess...
So I guess you don't know how to root a kdz?
---------- Post added at 05:25 PM ---------- Previous post was at 05:11 PM ----------
You can download the latest version as a kdz.
Use this link and enter your IMEI:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
You will get a download link.
Type
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
instead of
pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=
to download the file.
Then you can use the LG Flash Tool to flash the kdz to your phone.
You will loose root. Don't know if you have root.
You will have to root you phone again, but with the appropriate system img.
(Or inject root yourself...)
Click to expand...
Click to collapse
For your info, creating a rooted KDZ is currently not possible. If it was people would have done it already. And yes I do know the procedures to unpacking and repacking a KDZ for your info If it was possible to done it, I wouldn't be posting rooted images of just the system image itself and would have provided people with the rooted KDZ to save their time And also from what I know, I don't think there is any way for you to apply a root package in a KDZ and flash it together due to the modified md5 sum and such.
Indicious Flow said:
For your info, creating a rooted KDZ is currently not possible. If it was people would have done it already. And yes I do know the procedures to unpacking and repacking a KDZ for your info If it was possible to done it, I wouldn't be posting rooted images of just the system image itself and would have provided people with the rooted KDZ to save their time And also from what I know, I don't think there is any way for you to apply a root package in a KDZ and flash it together due to the modified md5 sum and such.
Click to expand...
Click to collapse
Ok. So we understand each other
I just wondered how you did it, because you wrote:
or you could go for alternatives like the rooted KDZ that I have created
Click to expand...
Click to collapse
But I saw you just edited your post.
---------- Post added at 06:03 PM ---------- Previous post was at 05:55 PM ----------
mic141414 said:
Thank you
I tried and I got "/H81510B_00.kdz"
Same as what i have now
???
I don't have root yet anyway but wanted the latest os available.
Don't know why the latest does not appear
Click to expand...
Click to collapse
Then it seems that only V10b is available for your phone.
Other users flashed the EU image which is 10e.
But why do you need an update?
If everything is working fine you shouldn't need an update.
Thanks for the info guys. I'm going to take a few days to digest. If I can ask a quick question without starting a new thread. Does the adb backup, backup the system partition as well or just data and apps?
Megazone38 said:
Thanks for the info guys. I'm going to take a few days to digest. If I can ask a quick question without starting a new thread. Does the adb backup, backup the system partition as well or just data and apps?
Click to expand...
Click to collapse
No adb backup can not backup your system partition.
It can only backup program settings, apps and data.
To backup your system partition, you need (the Send_Command.exe and) the "dd" command.
I have already rooted using the low effort root method. Used a pre-rooted system image. Still on 10b-SEA. everything works fine. Xposed is also working.
Sent from my LG-H815