Related
imagining when you wake up late in the morning, you pda has automatically updated the weather and receive all the mails when you rush out your house with a sandwich bitten in your month, is that will be great?
hi, i am wondering ,it there a app can:
turn on wifi at a set time, then receive all the email accounts, update the Touch flo 3d Weather and stocks
and even open the browser for the favorite website (news sport)
then turn off the wifi
haha , lazyness~~~
mortscript can
WiFi Locations
About close to what you might be looking for but this app is supposed to be location based
http://forum.xda-developers.com/showthread.php?t=448783
tricsio said:
About close to what you might be looking for but this app is supposed to be location based
http://forum.xda-developers.com/showthread.php?t=448783
Click to expand...
Click to collapse
thanks any way. but what i want is in a specific time, not a location , i don't want my cell to turn on the wifi when i play with my laptop to drain my battery at home.
i have ur same problem is there any program to turn on the wifi on every 1 hour for 5 min and sync emails and other stuffs right after that???
it would be great if it was able to wake up the device at time interval and:
* turn on wi-fi
* check if there is any free or previously authorized network available
* ability to play an alarm
* update the updatable (or facilities to run/create scripts)
* quit wi-fi
HTC is working on something like push internet..
but lacking of the choice of initiating wifi.
smog said:
it would be great if it was able to wake up the device at time interval and:
* turn on wi-fi
* check if there is any free or previously authorized network available
* ability to play an alarm
* update the updatable (or facilities to run/create scripts)
* quit wi-fi
Click to expand...
Click to collapse
Check PocketZenphone. It used to do a lot with profile settings. I gave up on it a while ago. Still going strong, last time I checked.
I'm searching for the same application.
Personally i just have a good data plan.
This kind of thing is done for me all day long...
You looked at SKScheMa?
I tried it before I had a decent data plan. Turned WiFi on at 7:00 am, then ran Egress Update at 7:01 and turned off WiFi at 7:02. That way I had all the latest road/traffic news ready for when I set off for work!
you can still have this very special functionally with mortscript for free.
the language is very easy and intuitive. give it a try.
try g-profile. I'm using it for some of the tasks that have mentioned.
Hmmm it could be done with a bit of playing about with a profile application such as G Profile, ( http://www.ageye.de/ ) then simply set up a time triggered profile that'll turn on your wi-fi and open the programs you want to up date, then swithes to the normall profile (which has the wi-fi turned off) after half hour or so (possibly once your alarm has gone off. You may have to set the programs you want to be updated to update on connect for it to work but basiclly this should get your device to do what you want, it's just a matter of going through your settings
sorry, but forget the profile solution. it wont work. how do you want to tell g profile or another application that it should click on "update now" or "Send/Receive"? there is no way. all you can do is to launch ONE programm. thats all. you cannot define any behavior.
str0nz0 said:
sorry, but forget the profile solution. it wont work. how do you want to tell g profile or another application that it should click on "update now" or "Send/Receive"? there is no way. all you can do is to launch ONE programm. thats all. you cannot define any behavior.
Click to expand...
Click to collapse
Thanks. G-Profile was something I looked at but couldn't get it to work
Anyone got a Mortscript example that could be modified?
True, but if you set the application to update it's slef whenever it's open on update when connected it will
Abram said:
Check PocketZenphone. It used to do a lot with profile settings. I gave up on it a while ago. Still going strong, last time I checked.
Click to expand...
Click to collapse
I have happily been using PocketZenPhone for many years, with a variety of HTC devices. However, I can't seem to get it to work properly with my Blackstone. Is there anybody out there who is sucessfully using PZP on their Blackstone?
Abram - did you give up on it for a reason? Did you find another program to use instead?
sounds genius ,
to download all the traffic and mails and weather before i wake up !
man , i need some scheduler like that !
if someone is doing this app , it will be amazing !
[developing started ]
if someone know on important dll , like the DB dll location/name , etc....
please PM me
any help guys?
TL;DR : Use Market Access and if Google won't accept your credit card due to the address not being from a "supported billing country", edit the card details in Google Wallet and use a US address. Thanks to Anomaly for sharing his method.
I cannot find a way to purchase apps on ICS. The Market Enabler method does not work, neither does it's Fake On Boot feature. But regardless, even if the Market is successfully spoofed by Market Enabler, I cannot get past the "Accept and Buy" page. I'm always hit with something like "The item could not be found" or "Your country does not support purchases". Market Enabler method used to work fine on Gingerbread.
Is there another way you guys in non-supported countries purchase apps? This is currently my biggest problem with ICS and no one seems to have any fixes.
Logcat of the problem: https://docs.google.com/document/d/1vF6X4L99u7Yug96pZ0-iWLkAZ81SIg2zKiPDd_rQsFs/edit
try Getjar and or Appbrain, see if that helps.
I emailed the devs of the market enabler app, and they seemed to think I didn't know what I was doing when I told them it didn't work with the GN. Maybe someone else will have some luck, I would love to have access to the TMO-USA shop.
I did the same thing but, got no reply. I will try again. I'm pretty sure it's an ICS issue. Google has changed something. Market Enabler worked fine on Gingerbread but, I could never purchase apps when I used it with ICS on my Nexus S.
chadmd23 said:
I emailed the devs of the market enabler app, and they seemed to think I didn't know what I was doing when I told them it didn't work with the GN. Maybe someone else will have some luck, I would love to have access to the TMO-USA shop.
Click to expand...
Click to collapse
Which Market Enabler did you use? The one by "rac" or the one by "Artou". Artou's won't even take root for me. rac's works fine and displays paid apps but, I can't purchase them.
Try MarketAccess, works great for me.
There is something strange with ME now, set on boot definitely does not work on ICS and most of the time doesn't work otherwise. I will try wiping data in the Market app and rebooting and 1 time in 10 it will stick and GoogleMaps will show up for me...but most of the time it doesn't work.
You need a USA card to purchase (which I have) but when not working not even free apps will show up.
Sent from my Galaxy Nexus using XDA App
Market Access is the same app as Market Enabler but I gave it a shot, no go. Tried uninstalling updates too.
Last time I had to restore a nandroid backup just to get my market working. Currently not working, very frustrating!
Sent from my Galaxy Nexus using XDA App
MarketAccess 1.0.6 have been setting US provider at every boot for me.
Market Enabler 1.8.1 from For2w does not, but it works when I set it manually.
And for the last 3 years or so, I have never had to use a US card, except for buying and renting music and movies.
Are you on a Galaxy Nexus? What ROM? What market version? Are you in the US?
B1ny said:
MarketAccess 1.0.6 have been setting US provider at every boot for me.
Market Enabler 1.8.1 from For2w does not, but it works when I set it manually.
And for the last 3 years or so, I have never had to use a US card, except for buying and renting music and movies.
Click to expand...
Click to collapse
Sent from my Galaxy Nexus using XDA App
What do you know, Market Access set on auto change on boot worked. I notice that it calls for root very early after boot, so maybe the change gets in before the Market starts to run or something. Thanks, a lifesaver!
Sent from my Galaxy Nexus using XDA App
Hmm, can't seem to find Market Access.
It's messed up. I've pulled out my SIM, spoofed it to Verizon, set up a US proxy, Cleared Market data and the Market still tells me purchases are not available in my country! This Market 3.4.4
Sent from my Nexus S using xda premium
Its not in the market; a quick bing gives: http://forum.xda-developers.com/showthread.php?t=1272690
Didn't work until I set it for Emulate on Boot. Make sure your data APN is setup and working before you reboot and you should be ok, changing it with market spoofing enabled will not work. If your data gets messed up you have to disable emulate on boot, reboot, reset your APN settings, and go again.
deejaylobo said:
Hmm, can't seem to find Market Access.
It's messed up. I've pulled out my SIM, spoofed it to Verizon, set up a US proxy, Cleared Market data and the Market still tells me purchases are not available in my country! This Market 3.4.4
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Mnemoch said:
Its not in the market; a quick bing gives: http://forum.xda-developers.com/showthread.php?t=1272690
Didn't work until I set it for Emulate on Boot. Make sure your data APN is setup and working before you reboot and you should be ok, changing it with market spoofing enabled will not work. If your data gets messed up you have to disable emulate on boot, reboot, reset your APN settings, and go again.
Click to expand...
Click to collapse
Lol, this is ridiculous. My phone says it cannot open the file! This has never happened before! And sideloading other apps is working fine!
Anyway, I'm using Market Unlocker which seems to have the same options plus it let's you proxy the Market through a US proxy of your choosing (Nicer UI too!) https://market.android.com/details?id=com.evanhe.marketunlocker . Since, according to the developer, the new Market checks your IP address as well. I even put the Market through TOR and used My IP to make sure I come up as in the US. Still no go! I suspect Google has maybe blocked/flagged me or something. Can't find any other explanation for this. When I get to my CC, I'm going to try a last attempt to use a different Google account with the same spoofing methods.
Thank you for trying to help.
It won't open from the "Downloads" app, browse to downloads in a file explorer and open from there...
deejaylobo said:
Lol, this is ridiculous. My phone says it cannot open the file! This has never happened before! And sideloading other apps is working fine!
Thank you for trying to help.
Click to expand...
Click to collapse
Mnemoch said:
Its not in the market; a quick bing gives: http://forum.xda-developers.com/showthread.php?t=1272690
Didn't work until I set it for Emulate on Boot. Make sure your data APN is setup and working before you reboot and you should be ok, changing it with market spoofing enabled will not work. If your data gets messed up you have to disable emulate on boot, reboot, reset your APN settings, and go again.
Click to expand...
Click to collapse
Thank you, Market Access did work.
Using Market Access now. No longer getting a "Purchases are not allowed in your country", now the message has changed to a consistent "The item you were attempting to purchase could not be found." or "An error occurred: Please try again."
So, I guess something's changed!
Try clearing your market data now that Market Access is installed and rebooting?
deejaylobo said:
Using Market Access now. No longer getting a "Purchases are not allowed in your country", now the message has changed to a consistent "The item you were attempting to purchase could not be found." or "An error occurred: Please try again."
So, I guess something's changed!
Click to expand...
Click to collapse
First thing I tried. Repeatedly. No go! I'm so frustrated. I'm thinking of just going this route: http://www.usunlocked.com/
Getting a virtual card with a US billing address so that I can use it on the web market as well.
Figured it out. Just flashed a new rom and it wasn't working, moved from Bigxie 5 to 6... one of the changes was restore from market now works. So I setup and some apps were coming down but I stopped to restore from TB. And Market Enabler etc no longer worked. Rebooting and clearing did not help.
So I removed my Google account from Accounts and Sync and then cleared data and uninstalled updates for the Market. Set Market Access to emulate on boot and rebooted. Logged into the Market (it asked for credentials) and back working fine.
Think it remembered from first boot and set my Google account to the wrong market.
Sent from my Galaxy Nexus using XDA App
This is the first wifi only device I've had. I'm on COB1,do you really have to manually y set the time? That just seems super lame
Anybody? Is there not a way to set time via network?
TigerDNA said:
Anybody? Is there not a way to set time via network?
Click to expand...
Click to collapse
I thought maybe it used network time. However, I find nothing in settings. Actually, I never checked for this as the Note has been so accurate with the time. Might want to check for an app if you must have it traveling across time zones.
This one looks good
https://play.google.com/store/apps/details?id=com.pautinanet.smarttimesync&hl=en
Description
Is time at your android device correct? Check it with atomic clock at GPS satellites or NTP by Smart Time Sync!
Features:
- Check and sync device's clock with GPS or NTP(Internet),
- Detect time zone by location,
- Time signal,
- Background time sync with NTP,
- Background passive time sync with GPS. Passive means the app uses GPS only when another app uses it,
- Very small memory footprint. In paid version even smaller - less 100Kb.
Automatic sync works only for rooted devices!
ATTENTION! IF YOU WANT THE APP TO SET TIME ZONES, IT'S REQUIRED TO INSTALL "SMART TIME SYNC TZ DATA" TOO. Just click on timezone field in the app and follow guide.
If the app doesn't work for you, please email me. I can't make the app better if you just leave a comment.
Please, rate the app if you like it. Thanks!
In free version background sync feature is time limited.
since the last four weeks my head unit looses timezone / Date & Time and country settings!!
every time i reboot the device
The radio stations and other configurations don't get lost
Does someone know what causes this failure?
The wires for +12V Ground and so on are connected correctly
(MTCB-KLD6-V2.86 RK3188-eng4.4.4 ANDROID VERSION 4.4.4_29032016)
Greetings
Juergen
How is it setup? Do you update through GPS or do you manually?
Sent from my SM-T800 using Tapatalk
Nightwchtr said:
How is it setup? Do you update through GPS or do you manually?
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
I update it manually.
I also tried the factory reset of the device.
But after i restarted the device the failure was the same
Another question is that did you update or install a custom ROM for it? If not I would suggest that as it might be outdated drivers may not be compatible. Basically its just like any other computer. Another suggestion would be to make sure the power connectors are tightly fitted if its not a plugplay.
Sent from my SM-N910P using Tapatalk
I installed the latest custom Rom from Malaysk.
It worked perfect for about 3 months
all power connectors are tightly fitted!
Same thing happened to me.
the only thing i can imagine how such problems can occur is a RAM problem
If the memory of the RAM loses it's information over a longer time period than we really have a big problem
I had an USB stick with this problem a longer time ago. In this case you can throw away the hardware!
The short solution is to delete all data and update the MCU
afterwards the bug is fixed and everything works fine again.
THE QUESTION IS ONLY----- HOW LONG??
brownstein72 said:
Same thing happened to me.
Click to expand...
Click to collapse
How long did you use your device until it happened?
quite a while, year maybe. but i think the time messed up in december as well. I just messed with the settings so hopefully it is fixed.
Hi brownstein72 i could not find out how i can fix this problem in the settings. I tried everything what is configurable with time and date. But nothing worked. If you found a solution please give me a feedback. Greetings
Can't figure it out either. It seems to always revert to Moscow timezone, no matter what I do. I have even disabled all automatic date/time settings. As well, my bluetooth stopped auto-connecting to my phone around the same time. Strange, I have not changed anything, a bug with something to do with new year maybe? I rely on the auto connect for having tasker start the wifi hotspot... I am not on the latest Malaysk, I may update but don't want to, I had it all set up the way I like it.
Edit: This time problem also screws up the auto-dimming feature.
That's the same behaviour like on my machine. What i can say... it has nothing to do with the new year. I had this failure in the middle of december. The only way to get it running again is to wipe all data ;-(
djprojekt said:
That's the same behaviour like on my machine. What i can say... it has nothing to do with the new year. I had this failure in the middle of december. The only way to get it running again is to wipe all data ;-(
Click to expand...
Click to collapse
I think I will update later today then, I see a new firmware from Malaysk was just released today.
On my unit the automatic time/zone according to GPS never worked.
The home time zone is grayed out and cannot be changed. First, on original soft and then on DSA's and original 2.97 MCU I had the home time zone set to Hong Kong.
A few days ago I updated soft to Booroondook's 5.1.1 + MCU to 2.98.
Home time zone is still grayed out, but now it's Moscow.
In both cases, time and zone never changed according to GPS (to Polish time, Eastern Europe, GMT+1). It was always the home time zone's time (Hong Kong something like GMT +12, Moscow: GMT+3). It's much better for me to have Moscow as a home time zone than Hong Kong, but still it's useless and I got to set the time manually. A complete fail with such a trivial and basic feature.
Anybody knows how to change the home time zone? Apparently it's a matter of either ROM or MCU (ROM probably, since Booroondook is located in Moscow, I suppose).
Hi ttoton, it's like i wrote last time.
The only possibility to fix this problem is to wipe all data and install the whole system new.
I did it last month and now everything works find.
I hope this bug will never occur
ttoton said:
On my unit the automatic time/zone according to GPS never worked.
The home time zone is grayed out and cannot be changed. First, on original soft and then on DSA's and original 2.97 MCU I had the home time zone set to Hong Kong.
A few days ago I updated soft to Booroondook's 5.1.1 + MCU to 2.98.
Home time zone is still grayed out, but now it's Moscow.
In both cases, time and zone never changed according to GPS (to Polish time, Eastern Europe, GMT+1). It was always the home time zone's time (Hong Kong something like GMT +12, Moscow: GMT+3). It's much better for me to have Moscow as a home time zone than Hong Kong, but still it's useless and I got to set the time manually. A complete fail with such a trivial and basic feature.
Anybody knows how to change the home time zone? Apparently it's a matter of either ROM or MCU (ROM probably, since Booroondook is located in Moscow, I suppose).
Click to expand...
Click to collapse
If you are root, check into the file build.prop in there you should see a line that looks like: persist.sys.timezone=Europe/Moscow
Modify that to whatever your android timezone is. That should do the trick. It worked for me.
I had the same problem as you, my time was always off. It basically remembers when the unit was shutoff . Than it took 10-20minutes for the right time to be updated (via GPS). I kinda solved it by changing the timezone line in build.prop .... and by forcing the GPS to update faster via an automation (app) script that wait for the car to boot and than automatically forces a GPS update by disabling the GPS than re-enabling it 3 seconds after. Now my time gets updated in 1min instead of 10+minutes. Something is up with the unit for sure but this is the best way I found it to make it work for me.
riccobonito said:
If you are root, check into the file build.prop in there you should see a line that looks like: persist.sys.timezone=Europe/Moscow
Modify that to whatever your android timezone is. That should do the trick. It worked for me.
I had the same problem as you, my time was always off. It basically remembers when the unit was shutoff . Than it took 10-20minutes for the right time to be updated (via GPS). I kinda solved it by changing the timezone line in build.prop .... and by forcing the GPS to update faster via an automation (app) script that wait for the car to boot and than automatically forces a GPS update by disabling the GPS than re-enabling it 3 seconds after. Now my time gets updated in 1min instead of 10+minutes. Something is up with the unit for sure but this is the best way I found it to make it work for me.
Click to expand...
Click to collapse
Thanks a lot, I will try this later today. I do have root, of course, with Booroondook's ROM.
riccobonito said:
If you are root, check into the file build.prop in there you should see a line that looks like: persist.sys.timezone=Europe/Moscow
Modify that to whatever your android timezone is. That should do the trick. It worked for me.
I had the same problem as you, my time was always off. It basically remembers when the unit was shutoff . Than it took 10-20minutes for the right time to be updated (via GPS). I kinda solved it by changing the timezone line in build.prop .... and by forcing the GPS to update faster via an automation (app) script that wait for the car to boot and than automatically forces a GPS update by disabling the GPS than re-enabling it 3 seconds after. Now my time gets updated in 1min instead of 10+minutes. Something is up with the unit for sure but this is the best way I found it to make it work for me.
Click to expand...
Click to collapse
I did what you suggested. I found 3 files named build.prop in the system folder, so I made the change in every one of them. Changed the timezone to Europe/Warsaw.
Works like a charm, at last proper time with auto GPS time option. Updated the time within a second. Many Thanks again!
Hi,
I am in the UK. I have a Philips 48PFT5500 tv. For the last few years it has been displaying the correct time. But a few weeks ago started displaying the time as one hour ahead of the actual time (currently British Summer Time). Also the tv guide shows all the correct programmes but the timings are one hour ahead. I don't know what happened to cause this problem.
I checked the settings under "Settings/Region and Language/Auto Clock Mode", and it is set to "Automatic". I tried changing it to "Country Dependent" but it made no difference. Also I tried changing the tv guide data setting ("Settings/General Settings/Advanced/TV Guide") from "From the Broadcaster" to "From the Internet" but that made no difference to the displayed programme timings.
Does anybody know how I can get it to display the correct time?
a
What time shows teletext, if any in this model?
It does have teletext. I tried it but unfortunately it is not working. The teletext page just shows a black screen with the page number at the top. I can change the page number but it doesn't show any text. I haven't tried the teletext for a long time so I don't know when it stopped working.
You can manually set the time. There is a manual about it. Site 72.
Thanks. I have manually set the time. Hopefully it will remain fairly accurate.
Strangely, in the manual it mentions that under "Auto Clock Mode > Country Dependent", there is a Daylight Saving option. However my TV does not have this option. Also the manual mentions that under "Region and Language > Clock", there is a Time Zone option. Again, my TV does not have this option.
This does not surprise me at all. Manufacturers sell different versions of the same model depending on the market. The manual is standard and/or often does not keep up with firmware changes.
Strangely, even if I manually set the time, it reverts to "Auto Clock Mode > Automatic".
I manually set the time a couple of days ago, but now it has re-set itself to Automatic, and is again one hour ahead of the actual time.
android_slave said:
Strangely, even if I manually set the time, it reverts to "Auto Clock Mode > Automatic".
I manually set the time a couple of days ago, but now it has re-set itself to Automatic, and is again one hour ahead of the actual time.
Click to expand...
Click to collapse
Hi, my philips has been doing the same since i purchased it, i set the time and the next day its changed to 1 or 2 hours depending on the time zone, my hunch is that i have an iptv app that keeps changing the time itself, have you installed any apps since this time issue started?
I had a bit of a similar problem with my TCL smart tv before.
My auto sync date and time is always incorrect which blocks my Youtube app and if I set my date and time manually it will always reset to automatic after a power cycle.
In the end it fixed itself and my auto sync date and time became correct. I encountered the problem after I switched ISP so I think it originated and was also fixed in their system.
damien89 said:
Hi, my philips has been doing the same since i purchased it, i set the time and the next day its changed to 1 or 2 hours depending on the time zone, my hunch is that i have an iptv app that keeps changing the time itself, have you installed any apps since this time issue started?
Click to expand...
Click to collapse
The only app I installed before this problem started was the Google Play Services app. (I still have the issue with the time on my TV.)
android_slave said:
The only app I installed before this problem started was the Google Play Services app. (I still have the issue with the time on my TV.)
Click to expand...
Click to collapse
The problem may also be created by the device from which you get Internet on TV.