Related
Hello,
So i flashed a bad rom phone wouldnt boot up, relocked boatloader but i couldnt flash any flashboot cmds because of low battery, so i unlocked my phone again and im able to acces cwm 5.8.2.7 or something, but how can i update cmw without flashboot commands cause of the low battery?
Phone is off right now its in the charger solid red light but im not sure if its charging or not so i could use some help,
And yes ive read the disaster recovery guide but im not sure to do
Ill hope you guys could be nice and help me
Thanks!
Crim3mast3rz said:
Hello,
So i flashed a bad rom phone wouldnt boot up, relocked boatloader but i couldnt flash any flashboot cmds because of low battery, so i unlocked my phone again and im able to acces cwm 5.8.2.7 or something, but how can i update cmw without flashboot commands cause of the low battery?
Phone is off right now its in the charger solid red light but im not sure if its charging or not so i could use some help,
And yes ive read the disaster recovery guide but im not sure to do
Ill hope you guys could be nice and help me
Thanks!
Click to expand...
Click to collapse
You can't unless it's in a flashable zip format but I haven't seen anything of that sort, yet..
Just yesterday I helped DivinDuck with a very similar problem. The post is here.
---SNIP
If you batter drops below 30%, use the script provided in this post to recharge it.
-Copy your CWM recovery 5.8.4.0 image file to where your fastboot files are on your PC.
-Reboot your phone to bootloader by pressing vol down+power buttons.
-When the phone says fastboot on a white background, plug the USB cable in to your PC and phone. It should now say FASTBOOT USB
-From your PC, open a command prompt, go to the folder where you have fastboot files and recovery image and issue
fastboot flash recovery <name of CWM Recovery>.img
fastboot erase cache
Now when you reboot your phone and go to bootloader then into recovery you should see CWM 5.8.4.0 version installed.
--SNIP
You should somehow figure out when your phone is charging or not. After that when you get little more life to your battery in CWM recovery you can go to "mounts and storage", and there "mount usb storage". Then your computer should see your device, and you will able to put working rom in phones sdcard and flash it over. It worked for me atleast, I once have almost same problem what you have now.
PeK_m said:
You should somehow figure out when your phone is charging or not. After that when you get little more life to your battery in CWM recovery you can go to "mounts and storage", and there "mount usb storage". Then your computer should see your device, and you will able to put working rom in phones sdcard and flash it over. It worked for me atleast, I once have almost same problem what you have now.
Click to expand...
Click to collapse
Only 5.8.3.x and later support USB mount under recovery. His version is older.
The following command (also in the charging batch file) can also be used to get the battery status (charging, not charging etc..) from fastboot:
fastboot getvar battery-voltage
eyosen said:
Only 5.8.3.x and later support USB mount under recovery. His version is older.
Click to expand...
Click to collapse
Right I missed that. Sorry about misinformative post.
PeK_m said:
Right I missed that. Sorry about misinformative post.
Click to expand...
Click to collapse
How do i save that file?
Thnx hope it works
Wow dude THANK YOU!!
It worked, think it charged in charger cause i didnt get battery error now
So how do i flash a rom from here?
Im not willing to **** it up again xD
First, put the rom zip file in ur sd card, then flash its kernel in fastboot by doing this:
Fastboot erase cache
Press enter.
Fastboot flash boot boot.img
Press Enter.
Fastboot erase cache.
Press enter.
Then go into recovrry, erase data, and preferably dalvik cache too, and then install the rom zip from sdcard
Then hit thanks
Im pretty sure the reason ur phone didnt boot is that u didnt flash the kernel
Sent from my HTC One X using xda premium
Also, when you relock you bootloader, fastboot commands won't work
Sent from my HTC One X using xda premium
Hello, i just messed up with my Htc One X, I want to flash the ARHD 10.6 but i got bootloop, then i tried to restore from my back up but i don;t know why everything is fone in my sd card. I tried to go back to stock with RUU. My cid is HTC__203, so i tried to flash with the
Europe 2.17.401.2 HTC - but it keeps show signature error 132.
I don't know what to do, then my brother change my hboot to 1.28
Does someone has an idea please? I am really desperate. It is forever bricked? thank you
get into fastboot and check are you locked or unlocked ?
I already unlock it and to flash ruu i relock it
- Unlock it
- Flash the latest recovery "fastboot flash recovery recovery.img"
- Extract boot.img from the Rom.zip you want to flash (preferably a jellybean rom)
- "fastboot flash boot boot.img"
- "fastboot erase cache"
- Boot into recovery and flash the ROM.zip
edit: you might try flashing the boot.img from ARHD 10.6 and fastboot erase cache and see if it boots
The problem is i can't get access to my phone. It get stuck to the screen with htc logo and there is nothing on my sd card right now. I tried to push file via adb but it also show no result
turn it off (long press the power button) then turn it on to fastboot, flash the boot.img and erase cache
I tried, i keep havin the bootloop(
Just hold the power button and volume down until it goes to bootloader.
Yes, I did go to bootloader, erase cache and flash the boot.img, but I'm havin the sam issue
Reflash recovery in fastboot, boot up recovery, usb mount, put firmware on and flash it. Then flash boot.img again in fastboot. That works, and if not, YOU are doing something wrong.
anthach said:
Yes, I did go to bootloader, erase cache and flash the boot.img, but I'm havin the sam issue
Click to expand...
Click to collapse
Thank you,with your instruction I can finally flash a rom. I did flash viper 2.6. It goes to the lockscreen but when I unlock, it shows : "venom tweaks stop working", and show blank screen with green htc logo. I'm downloading the ARHD jelly bean rom and give it a try. Thank you
Now, i am having the issue with my phone who doesn't recognise my internal sd card. I did a factory reset and went to the recovery to make sure that the sdcard is mounted, but still hain the same problem
matthiazzz said:
Reflash recovery in fastboot, boot up recovery, usb mount, put firmware on and flash it. Then flash boot.img again in fastboot. That works, and if not, YOU are doing something wrong.
Click to expand...
Click to collapse
Hi all,
I think my friend and i bricked his phone last night.
Its the HTC one x and we used the Hasoon2000 method. I think the problem was the perm root part of the software said unable to connect to device.
I searched around and someone said to flash supersu and that should do it. However after flashing that we did a backup of the phone in clockwork recovery.
We then tried flashing the viperX rom which we did on another one X and worked fine, it got to 1% and restarted. It then stuck at the quietly brilliant page.
We can't get it to boot into recovery but can get it to go to the bootloader. We tried to do the fastboot command from the PC to erase fastboot cache but it couldnt connect to the device.
I have read this thread http://forum.xda-developers.com/showthread.php?t=1764421 and but it is about the AT&T version, what recovery image would i need?
Also how can i tell if it is hard bricked or soft bricked? As i'm worried it could be hard bricked cause i couldnt erase the fastboot cache.
Any help is appreciated, and sorry if this is answered somewhere else but i couldnt see an answer.
Bit more bootloader info:
Unlocked
S-On
Hboot 1.39.0000
If possible i'd like to help my friend finish rooting it but if its easier put it back to normal.
Again thanks if anyone can help me.
What does the bootloader say, EVITA or ENDEAVORU ?
It says endeavoru
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Mr Hofs said:
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Click to expand...
Click to collapse
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
DannyBLOL said:
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
Click to expand...
Click to collapse
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
DannyBLOL said:
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
Click to expand...
Click to collapse
Is it possible for you to turn the phone off?
IF so it should charge a bit quicker that way
Also just to clarify, how did you try to install Viper X on your phone?
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
No, if i go into bootloader and fastboot then power down it turns itself back on if its plugged in.
Mr Hofs said:
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
Click to expand...
Click to collapse
The bootloader says unlocked, and we had CWM recovery installed it no longer loads up, it just reboots itself.
I'm confused by what you mean, what command would i use to run that file from the fastboot folder and after doing that do you mean i should leave it charging from the laptop?
Link to image of the bootloader if this helps - http://imgbin.org/index.php?page=image&id=11217
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again.
Edit : I see fastboot usb in the bootloader that's good ! :thumbup:
We need to get the batt charged so we can reflash the recovery, that will probably solve it all.
Mr Hofs said:
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again
Click to expand...
Click to collapse
Ok this is working. It doesn't say about low battery anymore on the bootloader. But ill leave it charging for a bit. What is my next step?
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Ignore me Mr Hoffs beat me to it
Mr Hofs said:
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Click to expand...
Click to collapse
YES! That has worked, we are in recovery. What can i do now? Should i try flashing ViperX or is the phone not permarooted?
Last time i tried to do permroot with the Hasoon2000 tool. That didnt work and i just flashed superSU, i think i must be missing something.
Thanks so much for your help!
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Mr Hofs said:
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Click to expand...
Click to collapse
Thanks so much mate!
Worked flawlessly. Seriously can't thank you enough!
Nice :thumbup:
Have fun with it !
CASE CLOSED !
Hi Guys,
I tried putting in a new ROM for my HTC ONE X International (HBOOT 1.33) and this problem came up.
1. Phone is stuck in bootloop. Whenever I try to turn it off, it automatically reboots
2. Battery drain because of bootloop, doesn't charge.
3. I can enter HBOOT but encounters the following issue
- Trying to enter recovery leads to rebooting and continuing the bootloop
- Trying to factory reset leads to rebooting and continuing the bootloop
4. Computer cannot detect the device since it never goes past the HTC load screen
I really appreciate any help you guys can provide.
Thank you
Did you flash the boot.img? You need to do it through fastboot: fastboot flash boot boot.img
Do a "fastboot erase cache" afterwards.
Also, which ROM were you flashing?
Sent from my One X
What recovery are you using? Try to flash the latest CWM from here http://www.clockworkmod.com/rommanager
it lets you charge when in recovery.
In order to flash it I had to have fastboot open and ready in the command window with the command to flash already typed in, then it was just a matter of timing->as soon as you go from Hboot to fastboot press enter.
Once you have access to the recovery you should be able to confirm your Hboot version and workout what needs to be done from there (ie flash the appropriate boot.img, or recovery from nandroid backup, run an RUU, or who knows what).
TToivanen said:
Did you flash the boot.img? You need to do it through fastboot: fastboot flash boot boot.img
Do a "fastboot erase cache" afterwards.
Also, which ROM were you flashing?
Sent from my One X
Click to expand...
Click to collapse
I was flashing OrDroidX 1.3.2. How can I flashboot if my device isn't recognized by my computer when I plug it in? (Sorry it's my first time) Also, my battery doesn't seem to be charging when it's off.
You need to be in fastboot mode. It should say fastboot in your bootloader menu, select it using hardware buttons. On the scree you should see
FASTBOOT USB
Then fastboot should work OK.
Check connection by doing
Code:
fastboot devices
If your battery voltage is really low, check out this script. It will start rebooting the phone and eventually battery will charge.
requiem11 said:
What recovery are you using? Try to flash the latest CWM from here
it lets you charge when in recovery.
In order to flash it I had to have fastboot open and ready in the command window with the command to flash already typed in, then it was just a matter of timing->as soon as you go from Hboot to fastboot press enter.
Once you have access to the recovery you should be able to confirm your Hboot version and workout what needs to be done from there (ie flash the appropriate boot.img, or recovery from nandroid backup, run an RUU, or who knows what).
Click to expand...
Click to collapse
How do I do this if my computer won't recognize the phone when I plug it into my computer? Thanks
So, I tried to get the latest Cyanogenmod on my phone.
Resulted in the the process com.android.phone has stopped issue.
FInally managed to get around that but no my phone is stuck with no CWM, no USB Windows fileshare and a HTC bootscreen.
I have searched, and read a lot of posts and the closes thing to recovery is a post on putting on a Nandroid backup for my Y13 (http://forum.xda-developers.com/showthread.php?t=1975140)
But, since I have no USB fileshare I am unable to get it on the phone and start the process.
Can anybody point me in the right direction?
I need to completely wipe and reinstall everything but has no access other that fastboot USB.
What info should I post and how do I find it if more is needed.
smurf69 said:
So, I tried to get the latest Cyanogenmod on my phone.
Resulted in the the process com.android.phone has stopped issue.
FInally managed to get around that but no my phone is stuck with no CWM, no USB Windows fileshare and a HTC bootscreen.
I have searched, and read a lot of posts and the closes thing to recovery is a post on putting on a Nandroid backup for my Y13 (http://forum.xda-developers.com/showthread.php?t=1975140)
But, since I have no USB fileshare I am unable to get it on the phone and start the process.
Can anybody point me in the right direction?
I need to completely wipe and reinstall everything but has no access other that fastboot USB.
What info should I post and how do I find it if more is needed.
Click to expand...
Click to collapse
Download Philz recovery and flash via fastboot. After this go in recovery and mound the sd card and wait 3-4 min. copy your rom on SD card flash the rom and flash the boot.img!
Thant said:
Download Philz recovery and flash via fastboot. After this go in recovery and mound the sd card and wait 3-4 min. copy your rom on SD card flash the rom and flash the boot.img!
Click to expand...
Click to collapse
Thanks Thant!
So, I have downloaded Philz, I think I have flashed the recovery.img file over to the phone from CMD shell window.
I have rebooted my phone to fastboot menu and selectet recovery.
The result is still the same. Just the htc boot screen.
I`m sure I`m doing something wrong but cant figure out how. Philz How to uses USB / PC file transfer so I`m unable to use it as a step by step.
Would really appreciate a step by step command overview. If possible with an explanation so that I learn why I do the different commands. Then I wont be so f.. ignorant about these things anymore. Hopefully
smurf69 said:
Thanks Thant!
So, I have downloaded Philz, I think I have flashed the recovery.img file over to the phone from CMD shell window.
I have rebooted my phone to fastboot menu and selectet recovery.
The result is still the same. Just the htc boot screen.
I`m sure I`m doing something wrong but cant figure out how. Philz How to uses USB / PC file transfer so I`m unable to use it as a step by step.
Would really appreciate a step by step command overview. If possible with an explanation so that I learn why I do the different commands. Then I wont be so f.. ignorant about these things anymore. Hopefully
Click to expand...
Click to collapse
The command to flash the recovery is fastboot flash recovery recovery.img you must to put recovery.img in your fastboot directory and you can run the command fastboot erase cache after this go in bootloader and choice the recovery this is all
Thant said:
The command to flash the recovery is fastboot flash recovery recovery.img you must to put recovery.img in your fastboot directory and you can run the command fastboot erase cache after this go in bootloader and choice the recovery this is all
Click to expand...
Click to collapse
Again, thanks!!
Forgot my phone at work so I`ll have a go tomorrow!
This issue will remain unsolved.
The phone no longer charges so I am unable to start any process what so ever.
Thank you so much for the help I got
smurf69 said:
This issue will remain unsolved.
The phone no longer charges so I am unable to start any process what so ever.
Thank you so much for the help I got
Click to expand...
Click to collapse
there is also a zip with a .bat file to charge in fastboot ...it should all work...as it was said before fastboot flash recovery recovery.img and fastboot erase cache...if nothng works then do the factory reset through bootloader helps often...if not working...hm try to find latest RUU for your CID which ould work...if already on hboot 1.7x only RUU from 3.14 and up would work
One-X-master said:
there is also a zip with a .bat file to charge in fastboot ...it should all work...as it was said before fastboot flash recovery recovery.img and fastboot erase cache...if nothng works then do the factory reset through bootloader helps often...if not working...hm try to find latest RUU for your CID which ould work...if already on hboot 1.7x only RUU from 3.14 and up would work
Click to expand...
Click to collapse
Thanks, but the phone is completely dead and unable to boot.
There is no power and the phone won`t charge so I guess it`s a gonner.
smurf69 said:
Thanks, but the phone is completely dead and unable to boot.
There is no power and the phone won`t charge so I guess it`s a gonner.
Click to expand...
Click to collapse
Search the forums, there are answers to get your device back to live. Like the charging script.