Related
I'm currently trying to downgrade my Acer a100 to hc 3.2 from the glitched up version of ics 4.0. I found several threads with a link to the download but the link appears to be dead. When I try to download it appears to try to fetch it but ends as download unsuccessfully. Does anyone have an answer for this? Thanks.
jdtablet said:
I'm currently trying to downgrade my Acer a100 to hc 3.2 from the glitched up version of ics 4.0. I found several threads with a link to the download but the link appears to be dead. When I try to download it appears to try to fetch it but ends as download unsuccessfully. Does anyone have an answer for this? Thanks.
Click to expand...
Click to collapse
Have you tried just doing a factory reset on the ICS your on to see if it clears anything up?
If you need it, Here<< is the post I used to downgrade to 3.2.1, keep in mind that you will most likely need to factory reset after the tablet reboots. It might hang on the android logo. Just power down then follow the hard reset from the recovery to get it to go.
Yes. I tried the factory reset but it still hangs up when using apps, browser, email, etc. Constant hang ups. Btw, I got the from downloaded but now it will not extract. Any ideas? I've tried win zip, unrar, and archidroid to no avail.
jdtablet said:
Yes. I tried the factory reset but it still hangs up when using apps, browser, email, etc. Constant hang ups. Btw, I got the from downloaded but now it will not extract. Any ideas? I've tried win zip, unrar, and archidroid to no avail.
Click to expand...
Click to collapse
You don't extract it. You need to rename it "update.zip" (make sure not to rename it "update.zip.zip"). Place it on the root of a freshly formatted microSD card. Then put it in the powered down tablet. Press and hold simultaneously the power button, and the volume down rocker (the one closest to the corner), until the tab vibrates. Then release, and you will see the it finding and installing the update file. After it restarts, if it hangs on the android logo (give it 5-10 minutes), perform the factory reset.
Gotcha, so there is noway to load it using the native memory or internal memory on the device? Or would that be a no-no anyways in the case it crashes during loading lol?
Thanks in advance!
Sent from my A100 using xda app-developers app
jdtablet said:
Gotcha, so there is noway to load it using the native memory or internal memory on the device? Or would that be a no-no anyways in the case it crashes during loading lol?
Thanks in advance!
Sent from my A100 using xda app-developers app
Click to expand...
Click to collapse
You never want to flash from internal memory, if something goes wrong you'll lose the file in the middle flashing right after your stuff is formatted. It may or may not format /data but if it does all of it, there goes internal SD.
Update.zip method is run from external SD I don't think it even checks internal SD when looking.
Tapatalked from my Galaxy S II.
Ok. I see. But I'm still a little confused. I've finally got the file downloaded and placed on the sd card. Which I might add was ridiculous as apparently it can't be placed on there manually without placing the file on a pc and loading it that way. Nonetheless, how exactly do I flash it now. I have it named update.zip.
Sorry for the confused remarks and questions. I'm use to Windows and have little experience with Linux based platforms. It seems as if Acer intentionally locked a lot of features on the a100 such as host usb ports, movable file systems, etc. Unless I'm dreaming here lol. Either way I like the tablet for the price.
Thanks.
jdtablet said:
Ok. I see. But I'm still a little confused. I've finally got the file downloaded and placed on the sd card. Which I might add was ridiculous as apparently it can't be placed on there manually without placing the file on a pc and loading it that way. Nonetheless, how exactly do I flash it now. I have it named update.zip.
Sorry for the confused remarks and questions. I'm use to Windows and have little experience with Linux based platforms. It seems as if Acer intentionally locked a lot of features on the a100 such as host usb ports, movable file systems, etc. Unless I'm dreaming here lol. Either way I like the tablet for the price.
Thanks.
Click to expand...
Click to collapse
Power off the tablet
Hold volume down, closest to the lock switch
Press and hold power
Let go when it says starting recovery kernel or update.zip in the upper left corner
When its done restart then hard reset
Hold volume up
Press power
Move the lock switch to lock and back a few times until it says resetting or whatever it says I forgot lol sorry
Restart tablet
Yeah Acer locked the boot loader which limits what we can do and how.
Tapatalked from my A100 - Aoikaze Alpha 3
Romman0 said:
Have you tried just doing a factory reset on the ICS your on to see if it clears anything up?
If you need it, Here<< is the post I used to downgrade to 3.2.1, keep in mind that you will most likely need to factory reset after the tablet reboots. It might hang on the android logo. Just power down then follow the hard reset from the recovery to get it to go.
Click to expand...
Click to collapse
Omg, thank you so much for posting the links to get the HC 3.2 stock ROM! You are a lifesaver. I had issues after an update where the wifi on this tablet wouldn't connect to any router. I had almost given up until I found your post. Now I have ICS 4.0.3 on this thing!!!
I also have the same problem no one can answer.
OK. Finally got it... I think. Here's what I had to do. Because the rom download kept faulting out randomly on download, I ended up using my laptop to download a program called download accelerator plus (dap) from old version.com. I then used its download manager to complete the download. I know... crazy, but it did the trick. The rest was per the directions given by other users on xda.
jdtablet said:
OK. Finally got it... I think. Here's what I had to do. Because the rom download kept faulting out randomly on download, I ended up using my laptop to download a program called download accelerator plus (dap) from old version.com. I then used its download manager to complete the download. I know... crazy, but it did the trick. The rest was per the directions given by other users on xda.
Click to expand...
Click to collapse
Crystal downloader is the same idea but for Android, check it out I use it ans get 3mb/s on my wifi.
Sent from my SGH-T989 using Tapatalk 2
Re up?
Hey, really sorry to post in a dead thread, but I can't find a working download link for 3.2 anywhere; it appears that the site is down. You guys seem to have downloaded it successfully though, so I was wondering if maybe one of you could put it on rapidshare or something? I very much need it, and I would appreciate a working download link. Thanks.
Itaer said:
Hey, really sorry to post in a dead thread, but I can't find a working download link for 3.2 anywhere; it appears that the site is down. You guys seem to have downloaded it successfully though, so I was wondering if maybe one of you could put it on rapidshare or something? I very much need it, and I would appreciate a working download link. Thanks.
Click to expand...
Click to collapse
http://ftp.bauernfeindiii.com/Misc_Shared/A100/update.zip
This one is 3.2.1. Remember if you are gong from 4.0 to 3.2, after the update goes through and it reboots, it might hang on the android logo. You need to factory reset to get it back.
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
Romman0 said:
http://ftp.bauernfeindiii.com/Misc_Shared/A100/update.zip
This one is 3.2.1. Remember if you are gong from 4.0 to 3.2, after the update goes through and it reboots, it might hang on the android logo. You need to factory reset to get it back.
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
Click to expand...
Click to collapse
Thank you, good sir. Thank you so much.
Romman0 said:
http://ftp.bauernfeindiii.com/Misc_Shared/A100/update.zip
This one is 3.2.1. Remember if you are gong from 4.0 to 3.2, after the update goes through and it reboots, it might hang on the android logo. You need to factory reset to get it back.
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
Click to expand...
Click to collapse
Will this procedure work with the stock 4.0.3 that comes with the locked bootloader?
ponjanek said:
Will this procedure work with the stock 4.0.3 with locked bootloader?
Click to expand...
Click to collapse
It will work on any ROM, its built into the boot process, so yeah, use it on anything installed it'll reset.
Edit: I was assuming you meant the reset thing, not the process of downgrading.
pio_masaki said:
It will work on any ROM, its built into the boot process, so yeah, use it on anything installed it'll reset.
Edit: I was assuming you meant the reset thing, not the process of downgrading.
Click to expand...
Click to collapse
Sorry, I should have been more clear. I DID mean the whole process. Have you or do you know of anyone that has tried this?
response from anyone would be appreciated....Thanks
is it possible to make a flashable honeycomb zip we can flash in cwm, without relockuing the bootloader because im bored and want something new
ponjanek said:
Sorry, I should have been more clear. I DID mean the whole process. Have you or do you know of anyone that has tried this?
response from anyone would be appreciated....Thanks
Click to expand...
Click to collapse
Np, here is a useful post,just what you need:
By Romann0
today kitkat OTA finally reach my nexus, YEA~~~~, so i went ahead and clicked update, my nexus reboot and updating to 4.4 but stuck on "finishing boot" session for a hr, so i hard reset my nexus and its now stuck on boot animation loop now......
I am using stock wifi only 32gb version, I tried get into bootloader then recovery mode but it says "no command", if i hold power and volume up I can get to a menu with factory reset... but i dont want to do that...
anyone know how i can fix this?
thanks.
Gnivol said:
today kitkat OTA finally reach my nexus, YEA~~~~, so i went ahead and clicked update, my nexus reboot and updating to 4.4 but stuck on "finishing boot" session for a hr, so i hard reset my nexus and its now stuck on boot animation loop now......
I am using stock wifi only 32gb version, I tried get into bootloader then recovery mode but it says "no command", if i hold power and volume up I can get to a menu with factory reset... but i dont want to do that...
anyone know how i can fix this?
thanks.
Click to expand...
Click to collapse
Try doing adb logcat while it is on the boot animation to see what is going on
Also try booting in safe mode
http://forum.xda-developers.com/showthread.php?t=2397282
Try uninstalling your louncher
Gnivol said:
today kitkat OTA finally reach my nexus, YEA~~~~, so i went ahead and clicked update, my nexus reboot and updating to 4.4 but stuck on "finishing boot" session for a hr, so i hard reset my nexus and its now stuck on boot animation loop now......
I am using stock wifi only 32gb version, I tried get into bootloader then recovery mode but it says "no command", if i hold power and volume up I can get to a menu with factory reset... but i dont want to do that...
anyone know how i can fix this?
thanks.
Click to expand...
Click to collapse
If you have an installed launcher try to uninstall it in safe mode. I had the same issue and it was because my launcher does not support Android Kitkat
huguito777 said:
If you have an installed launcher try to uninstall it in safe mode. I had the same issue and it was because my launcher does not support Android Kitkat
Click to expand...
Click to collapse
i cant even get into safe mode
trying to get adb logcat
edit: it worked! i was pressing the wrong key thats y i couldnt enter safe mode
i was using next launcher, entered into safe mode, change the default launcher and it boots again
thanks!
I suggest you go and use @scrosler 's roms. They're the cleanest in my opinion
Gnivol said:
i cant even get into safe mode
trying to get adb logcat
edit: it worked! i was pressing the wrong key thats y i couldnt enter safe mode
i was using next launcher, entered into safe mode, change the default launcher and it boots again
thanks!
Click to expand...
Click to collapse
How to get into safe mode when nexus 4 is stuck at boot animation?
naveenvalaja said:
How to get into safe mode when nexus 4 is stuck at boot animation?
Click to expand...
Click to collapse
From sfhub's link:
power the device off then
Press/Hold Power button until Google screen shows up, RELEASE Power button
Press/Hold VolDn until Android has booted up
If successful, you will see Safe mode overlayed on bottom left of screen.
Any luck with this? My Nexus was running Next launcher and is stuck at finishing boot after the update.
Sorry if this has been discussed before. I am not new to the rooting scene. But I am stuck on this issue
I am attempting to enter download mode for my Samsung Tablet 3 10.1 Wifi.
I am pressing the power / down volume combo and I get to the boot screen and let go. From here it goes right into recovery mode
I get the screen with the android and it says no command / error and stops there with the recovery options.
At this time I am on stock 4.2.2 and been trying to get this error figured out. I have searched briefly on here and googled other solutions but they all require to get into download mode, which I am having trouble getting to.
Any suggestions ? Or point me to a solution
Relic55 said:
Sorry if this has been discussed before. I am not new to the rooting scene. But I am stuck on this issue
I am attempting to enter download mode for my Samsung Tablet 3 10.1 Wifi.
I am pressing the power / down volume combo and I get to the boot screen and let go. From here it goes right into recovery mode
I get the screen with the android and it says no command / error and stops there with the recovery options.
At this time I am on stock 4.2.2 and been trying to get this error figured out. I have searched briefly on here and googled other solutions but they all require to get into download mode, which I am having trouble getting to.
Any suggestions ? Or point me to a solution
Click to expand...
Click to collapse
But the download method is by pressing (home+volume down + power) 3 combo not two as you mentioned
Sent from my SM-T210R_ipshock using Tapatalk
Ripshock said:
But the download method is by pressing (home+volume down + power) 3 combo not two as you mentioned
Sent from my SM-T210R_ipshock using Tapatalk
Click to expand...
Click to collapse
Hi !
Thanks for the quick reply. I have tried that method as well and it still sends me to the recovery screen. Though I did manage to see a new screen that gave me a option to press volume up to continue and volume down to reboot. When I pressed volume up it just rebooted normally
Relic55 said:
Hi !
Thanks for the quick reply. I have tried that method as well and it still sends me to the recovery screen. Though I did manage to see a new screen that gave me a option to press volume up to continue and volume down to reboot. When I pressed volume up it just rebooted normally
Click to expand...
Click to collapse
Adb reboot bootloader
sent from a buggy xda app by some miracle
zibrah3ed said:
Adb reboot bootloader
sent from a buggy xda app by some miracle
Click to expand...
Click to collapse
Thanks for all the help. I have figured out the issue and was able to get into download mode last night and successfully rooted the tablet.
Thanks again..
-Relic-
Right out of the RetailBox (with stockRom) I couldn't reboot into recovery using the "VolumeUp+Home+PowerButton" step...
Even now after installing a custom rom and twrp recovery I can't do the hardbutton action ("VolumeUp+Home+PowerButton") to get into the "recovery"
so whats the hiccup here? someone plz
thx
Samsung Galaxy Tab S 10.5
IronRom V2.3.5 (lollipop 5.0.x)
odin 3.0.5
drei??? said:
Right out of the box I couldn't reboot into recovery using the Volume up + home + PowerButton...
I just flashed a root... and then downloaded twrp through playstore and always rebooted with Newstart chosing reboot into recovery.... so it was fine till now..
now though, after installing IronRom .zip through twrp, it won't reboot anymore, it is stuck at the "Samsung Galaxy Tab S powered by android" starting screen.
Now I want to simply to the hardbutton reboot into recovery step, since i cant access it otherwise... but it doesn't react.
so whats the hiccup here?
thx
Click to expand...
Click to collapse
I would also like to know this, I recently installed the PAC-MAN (unofficial) rom and things went weird. I tried to flash official Samsung ROM through Odin, things went well but got stuck in Samsung booting logo (not the one that says powered by Samsung). The logo that comes after the Samsung jingle.
drei??? said:
Right out of the RetailBox (with stockRom) I couldn't reboot into recovery using the "VolumeUp+Home+PowerButton" step...
Even now after installing a custom rom and twrp recovery I can't do the hardbutton action ("VolumeUp+Home+PowerButton") to get into the "recovery"
so whats the hiccup here? someone plz
thx
Samsung Galaxy Tab S 10.5
IronRom V2.3.5 (lollipop 5.0.x)
odin 3.0.5
Click to expand...
Click to collapse
Pilot error.
Use reboot from play.
https://play.google.com/store/apps/...etrus&pcampaignid=APPU_1_ogS1Vd-JO4GfUsyfu7gM
---------- Post added at 05:09 PM ---------- Previous post was at 04:57 PM ----------
pooranimator said:
I would also like to know this, I recently installed the PAC-MAN (unofficial) rom and things went weird. I tried to flash official Samsung ROM through Odin, things went well but got stuck in Samsung booting logo (not the one that says powered by Samsung). The logo that comes after the Samsung jingle.
Click to expand...
Click to collapse
It takes 10 mins first boot to lollipop.
ashyx said:
Pilot error.
Use reboot from play.
Click to expand...
Click to collapse
So there is no way to get the HardButton way to work?
(My customRom already has multiple shutdown and restart option... thats how i've been operating.)
But once one is stuck somewhere and can't get to the system level (like boot loop or whatnot) it would be great to enter the recovery anyway... thx
drei??? said:
So there is no way to get the HardButton way to work?
(My customRom already has multiple shutdown and restart option... thats how i've been operating.)
But once one is stuck somewhere and can't get to the system level (like boot loop or whatnot) it would be great to enter the recovery anyway... thx
Click to expand...
Click to collapse
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
Holy Damn... thanks a lot!!!! that was really bugging me. I never found anything apart from just holding home+power+volumeup
I just tried this after trying other button combinations found on the web to try to get it to hard reset but nothing happens with my Tab S...it still stays stuck on the Samsung Galaxy Tab S startup screen. Any suggestions as to why that is?
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
Just signed in to say thanks for this, but for some reason I had to do it slightly differently. I was on stock 5.0.2 and trying to boot into recovery (Power+Volume UP+Home would start Samsung splash screens and then go black without ever booting into Recovery) so my solution was:
Shutdown Tab S, then hold down Power+Volume DOWN+Home (as though to get into Download mode) and then immediately after pressing that initially, I pressed Volume UP while still holding Power+Home.
Problem solved.
samgals said:
Just signed in to say thanks for this, but for some reason I had to do it slightly differently. I was on stock 5.0.2 and trying to boot into recovery (Power+Volume UP+Home would start Samsung splash screens and then go black without ever booting into Recovery) so my solution was:
Shutdown Tab S, then hold down Power+Volume DOWN+Home (as though to get into Download mode) and then immediately after pressing that initially, I pressed Volume UP while still holding Power+Home.
Problem solved.
Click to expand...
Click to collapse
Yours worked for me perfect
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
wooow it really works thank
ashyx said:
Pilot error.
Use reboot from play.
htt ps://play.google.com/store/apps/details?id=fr.petrus.tools.reboot&hl=en_GB&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Dgoogle+play+reboot+petrus&pcampaignid=APPU_1_ogS1Vd-JO4GfUsyfu7gM[/url]
---------- Post added at 05:09 PM ---------- Previous post was at 04:57 PM ----------
It takes 10 mins first boot to lollipop.
Click to expand...
Click to collapse
Someone please help me! I downloaded the apk above, chose "Boot into Recovery", gave it root, but it just took me to the "Downloading Do not turn off target!" screen & pressing Home + Power + Volume Down doesn't fix it! I'm using a Galaxy Tab S 10.5 SM-T800, stock Lollipop 5.0.2 and I used the combined TWRP & CF-Auto_root package on XDA to root it. Is all hope lost?
bokusen said:
Someone please help me! I downloaded the apk above, chose "Boot into Recovery", gave it root, but it just took me to the "Downloading Do not turn off target!" screen & pressing Home + Power + Volume Down doesn't fix it! I'm using a Galaxy Tab S 10.5 SM-T800, stock Lollipop 5.0.2 and I used the combined TWRP & CF-Auto_root package on XDA to root it. Is all hope lost?
Click to expand...
Click to collapse
Just do this:
ashyx; said:
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
Wow. Thanks! Didn't see that anywhere else...
None of these work for me so...I have a feeling for whatever reason I locked myself out of recovery. Yet to try adb recovery but have little hope.
podlinux said:
I have a feeling for whatever reason I locked myself out of recovery.
Click to expand...
Click to collapse
Not possible, purely pilot error.
Well adb recovery to my surprise and happiness worked! The only thing that worked for me.
I have a tab s that failed an upgrade, I have wiped the cache, and the system but it still will not start up.
Any suggestions?
Ghostwolf01 said:
I have a tab s that failed an upgrade, I have wiped the cache, and the system but it still will not start up.
Any suggestions?
Click to expand...
Click to collapse
Reinstall the firmware via ODIN
My j3 emerge says error..invalid boot loop image header can't get fed download mode help please
When and how was this method introduced?
It worked, so many thanks.
Just a bit convoluted... issh...
Is it a twrp thing? Almost a bit like a GitarChord
very thanksful it worked though
Soo.... I messed up and edited the build.prop specificly the ro.build.type property. I tried to enable some debug options without validating if this would be a good idea (hint: it's not).
It seems that this has bricked my phone, the first LG splash screen shows up with the powered by android, and the second animation just keeps loading forever (making the phone very hot). And the LED flashes blue continously.
I did manage to get the device visible in ADB but it tells me that the device is offline so I can't do anything with it.
Tried booting in recovery mode (holding power button + volume down) but it just own't go into recovery mode.
Some extra info of what runs on my phone:
- version H815
- Android 6.0
- bootloader unlocked
- TWRP installed
- Rooted
- XPosed installed
Any idea on what I could try to fix it? (I guess stuck with a brick but oh well).
Thanks!
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Thanks for the replies!
Vortuks said:
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Click to expand...
Click to collapse
I meant that it just boots 'normally' when I press those buttons, it shows me the first LG logo and the second animation just hangs, whatever I do. I tried all sorts of combinations with the power button + volume down. (Keeping it pressed, briefly letting it go after the lg logo and repressing them).
jinderation said:
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Click to expand...
Click to collapse
I don't know exactly which firmware I was on but I can't even get my phone into download mode (same as my other response, pressing volume up doesn't do anything).
The recovery and download mode used to work but I have no idea why it doesn't now...
When booting the phone, hold the power button and volume down button simultaneously, when LG logo appear, push the power button again. You should see the white screen, where you choose "YES" twice. Then the phone should kick you into TWRP or different recovery mode.
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Vortuks said:
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Click to expand...
Click to collapse
Maybe he has bootloop issue... ILAPO
Yeah I have no idea why the buttons aren't working for me. After a lot of searching I found this thread:
http://forum.xda-developers.com/g4/help/soft-bricked-device-t3248144
Which is basicly the same thing I'm experiencing, ADB comes online for just a brief second (kept spamming the reboot recovery command) and got in TWRP and I just flashed another which worked fine.
Odd thing is, even now my phone works I can't start recovery or download with the hardware buttons...... oh well, thankfully adb works as it's supposed to.
Thank you all for your help!