Related
Hi all.
Just took delivery of my dock kit, and it's very nice. Well built, but whether its worth £35 quid is another story.
Anyway, that aside...
When the default "Driving Menu" is enabled, is there a way to change it, especially to use CoPilot instead of Google navigation?
I have had a quick search in this section to see if anyone else asked the same question.
Im in the same boat. It would be nice if someone could do a workaround. Nice bit of kit for the price.
NatTheCat said:
Im in the same boat. It would be nice if someone could do a workaround. Nice bit of kit for the price.
Click to expand...
Click to collapse
How do you get audio to come out of the rear connector. I plugged my 3.5mm cable into the socket and the sound still comes out the speaker!
Have you tried it?
Settings - dock settings
ALexander
alx37 said:
Settings - dock settings
ALexander
Click to expand...
Click to collapse
Yep! I should have read the booklet, it did tell me in there ;-)
RTFM!
I struggle to take the phone out cleanly using on hand - always hit the power button. Dock mode seems pretty poor to me, seems to get all voice activated with road noise - is the google one any better? (we have a samsung 'special', I think?)
Another thing I've noticed is the terrible engine whine from the loudspeakers when its charging.
Now I tried headphone out socket too, and the same problem occurs.
To me it's a lovely piece of kit, but if you have it connect via Aux then u need to listen to the whinning noise from the charging.
Anyone conquered the noise suppression from an in car charger? It's doing my head in!
stratplayer said:
Anyone conquered the noise suppression from an in car charger? It's doing my head in!
Click to expand...
Click to collapse
have you checked it's not your car? Will try and remember to test if mine does this...
i also have the whining problem when charging. after some investigation, it appears to be caused by poor connections. in my case i suspect the head unit, as i didn't connect the rod at the back to the car frame with the bolt and nut.
you can get a ground loop isolator for about £15, but they just mask the problem - should really get it fixed if there is an electrical problem
Interesting. I have a 2008 Ford Mondeo from new. I'd hope that is electrically correct, but who knows.
I am awaiting delivery of a new car (Audi A3), so I will see if this has the same issue.
It's a real shame because the AUX out on the device increases the volume limit sent to the head unit and it makes a massive difference all round, this limit set by the poxy EU rules on the headphone out socket of the phone is really low (83% of max volume) and when you compare the two on the device its obvious the car kit is better.
BTW it makes the whining noise out of the headphone socket too, when plugged into cradle.
from what i've read, the noise when charging is usually from the alternator. do you notice the whine change when you speed up. if so, i'd get it checked out.
There is a method of basically powering the head unit direct from the battery, bypassing all the other connections and wires the juice has to go through to get to the head unit. probably what i will do if mine doesn't work after i've installed it properly.
I plugged mine into the radio today. From the headphone socket, no problem apart from a lack of volume (even on max gain, it is only just loud enough against the road noise). No background noise though.
Plugged into the connector on hte back of the dock is a completely different story. A ~10khz whine, which is present even with the 12V lead disconnected, and worse when it is connected. Sounds like breakthrough from a switch-mode power supply to me. Makes the audio-out on the dock not fit for purpose. Time to add my review on a fre sites selling them...
The other complaint I have is that it doesn't grip well enough to the windscreen.
tshoulihane said:
I plugged mine into the radio today. From the headphone socket, no problem apart from a lack of volume (even on max gain, it is only just loud enough against the road noise). No background noise though.
Plugged into the connector on hte back of the dock is a completely different story. A ~10khz whine, which is present even with the 12V lead disconnected, and worse when it is connected. Sounds like breakthrough from a switch-mode power supply to me. Makes the audio-out on the dock not fit for purpose. Time to add my review on a fre sites selling them...
The other complaint I have is that it doesn't grip well enough to the windscreen.
Click to expand...
Click to collapse
I agree, although I get noise from the headphone socket when in the cradle and charging.
I have raised a returns to send my unit back for a refund. It's a waste of time having it if you cant listen to music on it! Imagine listening to the SatNav with all that silence and "whine" on the speakers, it would drive you bonkers.
It's a real shame as the overall quality is pretty good, but it is not fit for purpose in my opinion.
Will update this thread if I get any more news.
Just posting a review on Amazon... found this review too
2.0 out of 5 stars Dissapointing, 28 July 2011
By
Sean Houlihane
This review is from: Samsung Vehicle Dock Kit for Galaxy S II (Electronics)
For the price, this does not do well enough. Yes it fits well, and holds the phone, with an integrated dock connector. However:
It is a push-fit corner grabbing design, and I find it almost impossible to release the phone with one hand.
The windscreen suction mount is feeble, so maybe 20% of the time rather than removing the phone, I end up with the whole thing coming un-stuck.
Dock mode on this phone is almost useless, so plan on replacing it if you think it is a good feature.
The audio-out functions, but there is a very poor electrical design - even if the charger is not plugged in, the signal picks up a constant high pitched whine (even with the car engine off)
Buy a cheaper one, and you'll feel less hard done by.
tshoulihane said:
I plugged mine into the radio today. From the headphone socket, no problem apart from a lack of volume (even on max gain, it is only just loud enough against the road noise). No background noise though.
Plugged into the connector on hte back of the dock is a completely different story. A ~10khz whine, which is present even with the 12V lead disconnected, and worse when it is connected. Sounds like breakthrough from a switch-mode power supply to me. Makes the audio-out on the dock not fit for purpose. Time to add my review on a fre sites selling them...
The other complaint I have is that it doesn't grip well enough to the windscreen.
Click to expand...
Click to collapse
Hilarious, just posted your comment on here from Amazon, didnt realise it was you until after I posted it!
There's one more for you to find - and it's not a cut'n'paste... Maybe not live yet.
If you don't want to run a car Samsung's menu
If you don't want to run a car Samsung's menu install aps from the store :
Dock No-Op .
If you want to restore the default you have to uninstall the application.
Samsung Cars Menu and that sucks and this increased volume of system sounds, it's up scares. I think everybody can hear it in the around car
And what this menu is, and so one can make your own card to use in the car.
Personally, I mounted the Launcher 7 menu that conforms to the Windows Mobile 7 and has the icon in the system ankles. Cubes as they rotate with the vertical grip twist at the best level for navigation. This arrangement works well in the car, because after docking nothing changes and I can continue listening to your music on the equipment in the car, not a hundred times to click to activate the music listened to on headphones before
Sorry for bad english, but google translator
I was a bit apprehensive about buying this dock as I'd read a lot of reviews complaining about engine noise and sub-par audio quality when outputting sound through the line-out but since receiving it I've been really pleased with it. There is no engine noise or unwanted sounds so I guess this varies from car to car and depends on how your stereo is wired up. I've also run a few low frequency speaker test mp3s through the line-out and headphone-out it as I'd read reports of the line-out cutting off some of the low frequencies but to my ear I hear no different and I get a good response from my sub with both. My only gripe is that the call audio is not routed through the line out. Although I knew this was the case prior to buying, I just can't understand why Samsung would have left this feature out. I've read that this was the case with other Samsung phone's official docks previously and in most of the cases I've read about a solution has been found either through a OS/kernel tweak or an app which sorts the problem out. I'm just hopeful that a helpful dev is able to have a look at this and see if a solution can be found for the SGS2. Otherwise it's a great dock
I have to say I am disappointed with this dock. Coming from a Moto Atrix dock, this is poorly designed. Love my phone, hate the dock.
At first glance it seems extremely well made but after using for a while it is fustrating.
One, they use to many materials compared to the Atrix dock. This thing is huge.
Two, its hard to get out of the dock. The atrix dock had a nice flip up latch that secured the phone.
Three, you have to run two cables from the dock for changing and audio. The atrix dock had one cable coming from the dock with an audio out dongle near the end of the cable.
Last, the freaking background noise is terrible. Dont even try to listen to audio at a low volume.
I like the flip up charger adapter. Also it works with the official extended battery. But thats about it.
Sent from my GT-I9100 using xda premium
This is not something new and have been shown many times in YouTube. It is interesting to have for any phone with 3.5mm audio jack that can be easily done within a few minutes. I do not use my headset with my phone so this would be a nice hack to have around to listen with your friends on some local radio without consuming your data plan and phone battery.
Find a headset that you do not need. We only want the part with the 3.5mm audio jack. Just trim it down to about 20cm in length and fold it in half and tie a knot at the end. I tied a lasso knot at the end just so I can adjust the length of the receiver later on though it may not help much in reception quality.
Tested several length from 1 meter all the way to 20 centimetres and found not much difference in reception quality for a fact that you will be using your loudspeaker to listen to the FM radio. The same with whether to loop or not to loop the receiver but looping the receiver gives it a cleaner look while maintaining the same reception frequency.
Putting your phone too close to a human body greatly interferes with the FM signal. On the other hand, placing your phone on a metal table may enhance the FM reception.
Perhaps those who have knowledge in electronics can shed some light to optimize this simple hack further.
Have fun...
I didn't know. Works like a charm !! Thank You
Doesn't work for me. When I plug in the trimmed headset cable with the ear pieces cut off, the FM App keeps asking me to plug in a headset. Works OK when I plug in an untrimmed headset and switch to speaker in FM App menu.
Is there a further trick to getting this to work? Are you using the stock FM App?
I had the same problem myself, and it stems from the fact that smartphones will interrogate any headset you plug in to check if it is suitable. There are basic stereo headphones with three contacts on the jack plug (from the tip they are left, right and ground) and should work on any phone regardless. But there are two variants of headset (i.e. those with a microphone) that use four contacts, the difference being whether they connect the mic on the third or fourth contact.
As of 2016 most manufacturers have standardised on one system (left, right, mic then ground), but there are enough older phones and matching headsets out there that use the alternative pinout scheme. For example my old Sony Xperia used L-R-G-M (the same as say Blackberry), necessitating the use of an adapter for certain accessories. My latest Z5 however, has moved to the L-R-M-G pattern, which means I can no longer use my favourite old Sony headset anymore, not even as plain headphones, the Z5 just refused to talk to them.
That explains why a dumb wire might not work with a smartphone, because it is looking for a signal loop on all four (or three) contacts to try and figure out what's been plugged into it. The solution is to short out the wires to fool the phone into thinking there actually is something on the other end. Simply bare all of the wires at the cut end of the cable, burn off the fine lacquer or cotton that is used as an insulation, then twist the wires together to short them all to the ground. Better still, solder them together and cover with a bit of heat-shrink for a proper finish.
Found some pre-made antennas in ebay, you can try searching for 3.5mm antenna. They look pretty decent. I am also looking for compatible antenna, if any, that is compatible for steven303's new headphone jack.
Edit: did some research and found that the 3.5mm steven303 mentioned is called '3.5mm 4 conductor' or 'TRRS antenna 3.5mm', you can try searching for them in ebay or look for similar ones lying around with wires long enough to be loops around to be used as antenna for new phones with the new type of head jack.
I got two item I think can be suitable for this purpose; search with the following keyword in ebay;
1. 3.5mm 1/8'' Male To Male 4-Pole 3 Ring TRRS AV Audio Extension Cable 1.2M/4Feet
2. 4-Pole 3Ring TRRS 3.5mm (1/8'') Male To Female AV Extension Cable 3FT/1M Black
I have an additional issue. I use my phone's fm radio feature with an old pair of headphones for an antenna and listen via blue tooth headphones when I'm running or just working around the house, etc. My problem is that as the phone moves around in my pocket, the movement causes the phone to think the headphones came unplugged for a second and the radio turns off. When that happens I have to take the phone out and turn the radio back on. This happens often enough that it is a pain in the neck.
A separate but related issue. With some old, non functioning headphone cables the phone doesn't think there is anything plugged into it. I am lucky in that my phone gives me the option to "Play anyway through speaker or bluetooth". So even though it thinks there isn't anything plugged into it, I do, and I have good FM reception.
Here is what I want: I want to know what to do to my old headphone wire so that my phone doesn't think there is anything plugged into it when it is, in fact, plugged in. I hope that makes sense!
I had a blue GS3 before and the headphones fit snug and now I have a new white one and if I turn the headphone jack slightly it cuts out completely on one ear and is very loose crackly also.....should I take it in the store for a replacement or what?
I'm having the same problem. Pissing me off. I'm noticing that it's with mostly with aux cables with 2 levels instead of 3 (don't notice with the OEM Samsung cables)
*although I have the white one*
tried different roms too, same problem.. didn't have this issue with me gs2
Im gonna take mine to the tmobile store and see what they say. Ill respawn later
Sent from my SGH-T999 using xda app-developers app
had that problem with a 3.5mm audio jack that was attached to the car. keep the audio jack plugged into your phone, reboot with it still plugged in, and it should start to work. that is, unless the wire is bad, or the base is too big- causing it to not go in fully.
is your headphone jack a right angle? i had the same issue with my one x that i returned but getting a headphone jack to jack adapter so instead of having a right angle and going to a straight one fixed it. waiting on a new adapter so i can try the same fix on my s3 that has the same issue with my right angle headphone jack...
having the same issue with multiple aux cables. rebooting while plugged didn't help
Sent from my SGH-T999 using xda app-developers app
Solution
Yep, That's the same here. Turns out that the jack is 'kinda cheapo' plastic that is, and if like me you use larger headphones (non-earbuds) that the side to side pull of the larger plug will eventually force a contact pin to no longer make that contact. You can pull and twist the cord and sound comes in and out on one side. in my case the right side.
Solution: I bought a replacement Speaker/Headphone assembly. Took me less then 5 minutes to disassemble the device and pop in the new OEM part. Problem solved. I got the part here ---> http://www.2buya.com/spare-parts/components/genuine-samsung-galaxy-s3-i9300-speaker-intenna-ear-jack-gh59-12159a.html
I chose this rather then wait for Mobilicity to take weeks to get it fixed for me.
Note: Ignore the i9300 part label. The stock part I removed from my t-999v also said i9300 on it. There the same.
Did you test the headphones on anything else? Try another set of headphones?
Of course
psykhotic said:
Did you test the headphones on anything else? Try another set of headphones?
Click to expand...
Click to collapse
Naturally. I tested on two identical Sony studio monitors, and a few earbuds. The problem was 100% hardware.
Have you guys tried cleaning out the headphone jack? Last time I had issues I had a little bit of lint stuck at the bottom and couldn't insert the headphone jack all the way in. Give it a shot and shine a light in, hopefully the issue you guys are having will just be a little lint!
Hope So
arctic84 said:
Have you guys tried cleaning out the headphone jack? Last time I had issues I had a little bit of lint stuck at the bottom and couldn't insert the headphone jack all the way in. Give it a shot and shine a light in, hopefully the issue you guys are having will just be a little lint!
Click to expand...
Click to collapse
That's a possibility, albeit a slim one. I used a jewelers loop in my case. Inside are multiple contact pins. Not all are used for sound. One of my pins was 'pushed' inward. That's why jiggling the plug causes a temporary solution. After I removed the original part I dissected it. The pins are set into the molded plastic as a single piece. The pins themselves are a single ribbon bent to flex a bit.
I figure in my case to much flexing of a the heavier plug with the weight of the coiled cord (Sony MDR-7505 Headphones) caused it to mash inward as I walked around. I'll never know for sure.
I hope it is just lint in the OP's case. If not at least parts are available. Non OEM parts are even less then what I paid. That or just wait for the repair done by Samsung.
_Kippo_ said:
That's a possibility, albeit a slim one. I used a jewelers loop in my case. Inside are multiple contact pins. Not all are used for sound. One of my pins was 'pushed' inward. That's why jiggling the plug causes a temporary solution. After I removed the original part I dissected it. The pins are set into the molded plastic as a single piece. The pins themselves are a single ribbon bent to flex a bit.
I figure in my case to much flexing of a the heavier plug with the weight of the coiled cord (Sony MDR-7505 Headphones) caused it to mash inward as I walked around. I'll never know for sure.
I hope it is just lint in the OP's case. If not at least parts are available. Non OEM parts are even less then what I paid. That or just wait for the repair done by Samsung.
Click to expand...
Click to collapse
Hmm, I think i'm starting to have the same issue as you. When I had my LG i had the issue with the plug and lint.. it seems this time with the S3 it's just not as well made. Where would you be purchasing the part from? I would consider fixing it on my own..
arctic84 said:
Have you guys tried cleaning out the headphone jack? Last time I had issues I had a little bit of lint stuck at the bottom and couldn't insert the headphone jack all the way in. Give it a shot and shine a light in, hopefully the issue you guys are having will just be a little lint!
Click to expand...
Click to collapse
Unfortunately, I have the same problem, I will try to follow your method of
Thank you!
Using the Galaxy Nexus and I had just purchased the Klipsch s4a earbuds (amazing purchase for anybody who's an audio lover without incredibly deep pockets) and the audio kept cutting unless I had the jack placed in a specific manner --which is impossible to keep in a jacket, so I came across this thread and wondered how the hell lint can get into such a small hole. I checked by digging a toothpick till the end and scraping out a massive chunk.
Earbuds work amazingly now.
Thank you XDA,
-Aero
Aerolith514 said:
Thank you!
Using the Galaxy Nexus and I had just purchased the Klipsch s4a earbuds (amazing purchase for anybody who's an audio lover without incredibly deep pockets) and the audio kept cutting unless I had the jack placed in a specific manner --which is impossible to keep in a jacket, so I came across this thread and wondered how the hell lint can get into such a small hole. I checked by digging a toothpick till the end and scraping out a massive chunk.
Earbuds work amazingly now.
Thank you XDA,
-Aero
Click to expand...
Click to collapse
I'm having the same problem, but for me it's worse when the headphones go too far down. In other words I intentionally put some tiny bits of paper into the hole and now it doesn't cut out as easily. But still if I move the plug too far to one side it'll cut off, which is really annoying when it's in my pocket and I occasionally bump the chord plug with my hand. I generally use iphone earbuds. I've read that the samsung jacks are a slightly different size than standard. This might contribute to the problem.
baillou2 said:
I'm having the same problem, but for me it's worse when the headphones go too far down. In other words I intentionally put some tiny bits of paper into the hole and now it doesn't cut out as easily. But still if I move the plug too far to one side it'll cut off, which is really annoying when it's in my pocket and I occasionally bump the chord plug with my hand. I generally use iphone earbuds. I've read that the samsung jacks are a slightly different size than standard. This might contribute to the problem.
Click to expand...
Click to collapse
Where did you read that Samsung jacks are a different size? I have used several different 3rd party headphones and have not had a single issue. They all fit and work perfectly.
If anything is made with a different size, I'd be much quicker to suspect Apple before Samsung. They love building proprietary hw so people will be forced to do things their way!
Have you tried a different brand of headphones? It is possible the jack itself is messed up somehow too though.
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Where did you read that Samsung jacks are a different size? I have used several different 3rd party headphones and have not had a single issue. They all fit and work perfectly.
If anything is made with a different size, I'd be much quicker to suspect Apple before Samsung. They love building proprietary hw so people will be forced to do things their way!
Have you tried a different brand of headphones? It is possible the jack itself is messed up somehow too though.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Honestly I've only tried my old and new iphone earbuds. Both have the same problem, but what I discovered by shaving the plastic away from the tip of the jack is that the further in it goes the more it cuts off, hence shoving paper into the hole to keep it from going in too far.
Another thing I did notice is that this problem started when the headphones became much looser. When I first bought the SGS3 I had to really push hard to get the headphones into the phone. I could literally drop the phone from my pocket and it wouldn't detach and would just dangle from my ears. Now it comes out really easily. Clearly something isn't gripping well enough. That seems to be the real issue I guess, but I have no idea how to get in there and fix it. I don't want to risk breaking my phone trying to take it apart.
sounds like the inside of the jack is messed up. When you were having to push hard to put them in, it most likely bent or wore out the part it snaps into over time.
Only real solution to that, that I can think of, would be to replace the jack I'm afraid.
Sent from my SGH-T999L using xda premium
I just bought a different set of headphones for use with my S3, but I miss having the pause/play and volume buttons on the headphone cable. Does anybody know of a male-male or a male-female cable that will provide these buttons? My headphones have a 3.5mm female jack on the bottom of them so I would prefer a male-male cable, plus that would also work for when I am playing music on my phone in my car, it would be nice to not have to use the touchscreen for pausing / skipping tracks.
There are a few about - search on Google for "phone control headphone adapter" - but you may also want to consider the Sony Ericsson MW600. It works via Bluetooth rather than wire, but it has all the controls you're after and more. Fairly well priced, too, and I can confirm it works with the S3.
Only difficulty for you will be your wish to have a male jack - that's a pretty unusual combination. Most adapters will have a female jack for you to plug a standard set of headphones into it.
have you used the mw600's ? sound quality? anyone have a source for a nice short LOUD single earbud with a short leash to use with this as a headset (not legal to have 2 buds in most states not safe either)
Like this?
so basically this is an auxiliary cord with controls? like on beats headphones? those sound perfect for you.
sent from my I747
nerys71 said:
have you used the mw600's ? sound quality? anyone have a source for a nice short LOUD single earbud with a short leash to use with this as a headset (not legal to have 2 buds in most states not safe either)
Click to expand...
Click to collapse
I can vouch for the MW600's sound quality. It's excellent, and the signal strength on the WiFi is very good even when the phone is in my backpack with the MW600 clipped to my coat front. Only one caveat - the lead from standard headphones will end up being quite long if you clip the MW600 at chest height or above, so you'll have a fair amount of slack to deal with. I just stuff it into my inside pocket.
Thanks for the answers. Bluetooth solutions are not ideal since they then have batteries that also need to be charged and typically cannot be charged and used at the same time (not to mention for decent quality ones that sound good the price is higher than I would like to spend). That radioshack cable is interesting, I have been searching around for other cables like that and have turned up a few possibilities. Have any of you guys bought any of these cables and can give a review or opinions about which ones are good?
I have a feeling that this is something that is actually quite common but "hard to find" since it uses generic search terms (try finding the little gizmo that lets you insert a full size SD card into a Micro SD Card slot hehe common and about $4-$5 but hard to find since any search terms you use to find it finds you "other" things
nerys71 said:
I have a feeling that this is something that is actually quite common but "hard to find" since it uses generic search terms (try finding the little gizmo that lets you insert a full size SD card into a Micro SD Card slot hehe common and about $4-$5 but hard to find since any search terms you use to find it finds you "other" things
Click to expand...
Click to collapse
I think you are right, I keep finding all sorts of things that aren't what I am looking for when I search... maybe I should just write DX and ask them to make one
Hi,
I have been trying to troubleshoot my issues and have had no luck.
one day my headphones stopped playing in my right ear so I figured it was a bad headphone jack. I bought a new one and replaced it. Now it only plays when button control headphones are plugged in (the plugs with the 3 black stripes not the 2 like standard earbuds). It does play but if I turn the headphone plug it stops playing at certain points while turning. the rear speaker works fine.
I tried having the jack plugged in with the metal outer case off and I have the same issue (again, I don't think a short is an issue).
I checked everything and the headphone jack appears to be fine, doesn't appear to be a short anywhere. I am at a loss on what my next step would be.
Thank you.
There are lots of possible solutions, that you can try.
Sounds like you might just need to replace the audio receiver.
It's a $5 part and a 10min job - http://www.dx.com/p/genuine-repair-...-module-for-samsung-i9220-139035#.U36IJvmk2QA
Here's a pre-existing thread full of people having similar issues.
http://forum.xda-developers.com/showthread.php?p=52858277