Related
Unbricking Guide:
(Guide for the American version of the device - LG Nitro HD)
*** Remember, whatever you do, you do at your own risk and responsibility for your actions rests solely on you ***
Introduction:
Sorry, I know my english is not so well as I want, but I tried to explain all steps in this guide for people who never flashed their devices before.
Please, don't mirror links to required tools and files on other sites! Daily traffic is limited!
Required tools:
1) ADB: Get it from here - Android Developer SDK , and then specify the path (PATH) to the folder containing the ADB.
Alternate method: copy the folder ADB from the folder SuperOneClickv2.3.2_ShortFuse to the drive C:/ on the computer, and then specify the path (PATH) to the folder containing the ADB.
How to specify the path to the ADB:
My computer (right mouse button) -> Properties -> Advanced System Settings -> Environment Variables -> In the lower window find the line Path and double click on it -> At the end of the string "Value" add the complete path to the ADB (eg C:/ADB) and click OK (don't forget to add ";" before).
2) SuperOneClick: Link - Mirror1 - Mirror2
3) LG P930 drivers: Link - Mirror1 - Mirror2
4) KDZ_FW_UPD_EN: Link - Mirror1 - Mirror2
5) Small HTTP Server:
a) shttp3: Link - Mirror1 - Mirror2
b) www: Link - Mirror1 - Mirror2
Required files:
1) V10F_00.kdz: Link - Mirror1 - Mirror2
2) boot.img: Link - Mirror1 - Mirror2
3) recovery.img: Link - Mirror1 - Mirror2
4) firmware.img: Link - Mirror1 - Mirror2
5) baseband.img: Link - Mirror1 - Mirror2
6) system.img: Link - Mirror1 - Mirror2
So now we have everything we need to restore our system. It remains only to extract all the files and you can get to work.
The process of resuscitation:
1) Install the drivers from folder LG P930 drivers.
2) Install the B2CAppSetup from folder KDZ_FW_UPD_EN.
3) Install shttp3.exe on drive C:/, note "I agree with this license, and I accept all items", "Update entry in main menu" and "Add to startup".
4) Run the program http.exe, click the right mouse button on the top of the Small Server and select Server -> Settings...
5) Go to the tab HTTP, in the "TCP/IP port for HTTP server" change port 80 to port 9002 and at the top right click on OK.
6) Unpack content of the www.ziр in the folder C:/shttps/www.
It is important:
Small Server software must be running, or unbricking will not be possible.
7) Open with a notepad (as Administrator) file hosts, which is located in C:/Windows/System32/drivers/etc and at the end add the following:
127.0.0.1 csmg.lgmobile.com
Save and exit.
8) Switch the phone to Download mode:
Turn off the phone, if you have not turned off.
Disconnect the USB cable from the phone if connected.
Hold down Volume Up and connect the USB cable to the phone.
Hold Volume Up until the screen: Download mode.
9) Open the folder KDZ_FW_UPD_EN and run the program UpTestEX_mod2_marwin.exe
10) Click on the folder icon in the row "Select kdz file" and select the file V10F_00.kdz
11) Click on "CSE web upgrade test".
12) In the window that appears, click on "Upgrade Start".
13) In the next window that appears, you will be prompted to select country and language, which will use the program. Since few of us know Korean, change the language to English, and follow on.
14) The program will begin to flash update file V10F_00.kdz on your phone.
It is important:
If you notice that the software update stuck at 4%, close the program through Task Manager and go to step 5!
15) When the update reaches 90% of your phone will reboot. Do not do anything until the upgrade is finished completely!
It is important:
If you notice that the upgrade program generated an error at 93%, do not panic. Just forcibly restart the phone.
If you notice that the upgrade program stucked on 90% for a long time, just forcibly close the upgrade program and move on to getting root.
16) Phone revived, you can begin to get root.
Getting root:
So, your phone is officially revived the Korean language with Korean firmware by default.
Before proceeding, make sure that your phone is connected to a PC in PC Software mode.
1) A gesture from the bottom-up on the lock screen will take you to the master wizard (where everything is in Korean). Press the left button on the bottom of the screen and two seconds later your phone will "talk" to his native English. You can continue to follow the master wizard, but honestly, it's unnecessary. We just wanted to change the language.
2) Install the drivers on the PC from folder LG P930 drivers. After that, wait until the PC to install additional drivers.
3) Go to Settings -> Applications -> Development and turn on "USB debugging".
4) Run SuperOneClick.exe and click Root.
5) Wait for the completion of the root. Check in the phone that the program Superuser appears.
* If it appears, then we can begin to flash the original AT&T's images.
* If not, repeat the procedure for obtaining root.
It is important:
Be patient, sometimes it takes about 20 times to get root.
I strongly recommend to use SuperOneClick 2.3.2 version to get root! Version 2.3.3 for some reason doesn't work with our phone.
Restoring the original Nitro HD images:
1) Connect your phone to your PC in Mass Storage mode (select the type of connections Mass storage).
2) Copy to the root of the SD-card all 5 images (boot.img, recovery.img, firmware.img, baseband.img and system.img).
3) Upon completion of copying of images put the phone back into a PC Software mode and make sure USB debugging enabled.
4) On your PC go to Start -> Run -> write cmd and click OK.
5) In the window that appears, use the following commands are strictly in the order in which they are registered (otherwise, again, get a brick and will have to start from scratch):
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
dd if=/sdcard/firmware.img of=/dev/block/mmcblk0p1
dd if=/sdcard/baseband.img of=/dev/block/mmcblk0p14
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
6) Wait for the completion of the last command (it takes quite a long time) and forcibly turn off the phone.
7) At the same time hold down the Power button and Volume Down and wait for the screen: Factory reset.
8) Double-click on the power button, confirming our actions.
* Phone will start factory reset and will restart at the end.
Congratulations! Now your phone has an AT&T's operator firmware and root-rights.
Guys, I'm really happy to be a part of this great community, but I decided to move on. Thanks to all of you!
HI,
hey, quick question sort of on/off-topic ;-)
does it matter which kdz i initially flash? in other words, after all the new images are moved over, the initial kdz is irrelevant right? Reason I ask is I did this using the v10i kdz
scott0 said:
HI,
hey, quick question sort of on/off-topic ;-)
does it matter which kdz i initially flash? in other words, after all the new images are moved over, the initial kdz is irrelevant right? Reason I ask is I did this using the v10i kdz
Click to expand...
Click to collapse
No, it doesn't matter. You can flash any kdz you want, but I prefer the v10f.
why's the preference for v10f?
I can go back and reflash my device with the v10f if it's better, easy breezy.
scott0 said:
why's the preference for v10f?
I can go back and reflash my device with the v10f if it's better, easy breezy.
Click to expand...
Click to collapse
It's only because of getting root. I have tried to get root with v10i.kdz many times and I have never succeeded. With v10f.kdz I have not any problems to get root. Yes, sometimes it takes about 10-20 attempts to get root, but in the end is always obtained.
My phone is stuck at the pink LG Optimus LTE screen, there is a progress bar below which moves for few seconds initially but then freezes.
The update tool completes the flashing to 100% and says update completed but the phone doesn't boot.
Any help??
fyi, I was on CM9 nightly before this and wanted to go back stock.
jainanshal said:
My phone is stuck at the pink LG Optimus LTE screen, there is a progress bar below which moves for few seconds initially but then freezes.
The update tool completes the flashing to 100% and says update completed but the phone doesn't boot.
Any help??
fyi, I was on CM9 nightly before this and wanted to go back stock.
Click to expand...
Click to collapse
Sorry, I don't know what is the steps you need to do before you want to go back to stock from CM9. I guess you need to flash the original boot.img before, but I'm not sure.
But is there any way to go past this LG Optimus LTE screen or install recovery from outside or flashing img partitions from this state?
Plz help... it seems my phone is gone
jainanshal said:
My phone is stuck at the pink LG Optimus LTE screen, there is a progress bar below which moves for few seconds initially but then freezes.
The update tool completes the flashing to 100% and says update completed but the phone doesn't boot.
Any help??
fyi, I was on CM9 nightly before this and wanted to go back stock.
Click to expand...
Click to collapse
Did you try doing a factory reset?
yes did.. no use, still the same.
---------- Post added at 10:31 AM ---------- Previous post was at 09:56 AM ----------
There's one more thing..
The marwin tool from the KDZ_FW_UPD_EN.zip file i downloaded using the above link does not have any option to "CSE web upgrade test", the option it gives me is only "Normal web upgrade test". Till now i have been using only that and does it does complete the flashing process, although leads to the pink horror.
Uploading LGP930AT-01-V10j-310-410-FEB-26-2012.zip Please Wait...
Ill update this post when it finish's. This is the latest version they have for it. You can just recover using LGNPST. Ill grab dll later to. Just place in E-mode. Select DLL select TOT and restore.
@amoamare,
Is this just the small 20mb update or is it the full recovery image?
Hello, sorry to derail your thread for a minute, but just dropping by to let you know that this thread has been featured on the XDA Portal
Link
http://www.xda-developers.com/android/unbrick-your-lg-nitro-hd-with-this-guide/
I hope you enjoy it!
@Malnilion,
Its a full 300 MEG File in .TOT format needs to be flashed using LGNPST. It is not the standard system, recovery, boot.img formats.
You must use LGNPST to flash the device, but you can flash in recovery mode to unbrick a device.
---------- Post added at 07:48 PM ---------- Previous post was at 07:38 PM ----------
LGP930AT-01-V10j-310-410-FEB-26-2012.zip
^ Click to download the latest .tot file. You can recover, or just simply go back to stock using LGNPST.
File is 300Megs
@amoamare,
This is truly awesome! This should completely eliminate the need for people to flash the SU-640 rom if they brick their Nitro.
Now you still need the dll for this phone and LGNPST.
Also fair warning. I don't know if GSM phones when flashed in recovery or not loose there IMEI like the cdma versions. Im not responsible for any damages.
I will upload the dll when I get back.
Thank you thank you thank you
I registered on this site just to say thank you for this. I actually never bricked my phone ... just installed the ota update to v10j, which made it impossible to root it. So I followed this guide (I know it was probably a little risky) and finally rooted my phone after a week of failed attempts.
Thanks.
amoamare said:
LGP930AT-01-V10j-310-410-FEB-26-2012.zip
^ Click to download the latest .tot file. You can recover, or just simply go back to stock using LGNPST.
File is 300Megs
Click to expand...
Click to collapse
I'm just curious, but... what is the source of this file? Is there a version of this for the AT&T V10f firmware?
amoamare said:
@Malnilion,
Its a full 300 MEG File in .TOT format needs to be flashed using LGNPST. It is not the standard system, recovery, boot.img formats.
You must use LGNPST to flash the device, but you can flash in recovery mode to unbrick a device.
---------- Post added at 07:48 PM ---------- Previous post was at 07:38 PM ----------
LGP930AT-01-V10j-310-410-FEB-26-2012.zip
^ Click to download the latest .tot file. You can recover, or just simply go back to stock using LGNPST.
File is 300Megs
Click to expand...
Click to collapse
This looks like a ray of life for my phone which is dead since past 2 days... Thanks a ton!!
Can someone plz comment or elaborate more on this tool and how to use it? Also, how about the IMEI issue @amoamare mentioned?
Did any1 try this?
This will be excellent if it is ATT stock V10f.
Question: do we need to select type? ex: CDMA or CMDA-Smart Phone (WM) or doesnt matter?
(For ATT Nitro HD)
Thanks everyone!
First of All, thanks to developers for keeping us trouble free by working and modifications for our mobiles.
2nd ,this is not my work.I had collected from a Vietnamese site.i am just posting to help others if they are facing the problem (like me) in rooting and recovery of latest jelly bean update v30c for lg su640.
THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS
PROCEDURE:
1. make sure you have installed latest lg drivers
2. turn on the debugging option in settings/developers options
3.now connect the phone with computer, a pop up window appears on phone, select lg software there.
4.now go to the root v30c folder and run the bat file.and press any key to continue
5.message will appear on running window, now disconnect mobile from computer and turn of debugging mode for 5 seconds.
6.now turn on debugging mode again and connect the phone with computer and press any key to continue.
7.if all goes well, you will see a message that mobile is rooted, enjoy.
if it is rooted than go for cwm recovery installation.
1.run the ''run me.bat'' file placed in folder downloaded.
2. if every thing goes well, you will see some figures (numbers) in and out.if it is so, hurray, you have installed recovery properly.
mobile will reboot and go to recovery.
Quote:
***************************** CREDITS TO ALL THE DEVELOPERS *******************************
LINKS FOR FILES
JB ROOTING
https://docs.google.com/file/d/0BwuJnNfF1xTnb21pR1Z6NDNyeXc/edit
JB RECOVERY
http://www.mediafire.com/download/1j9zcbkahhakrb5/cwm_su_640.rar
rooting guide
213 views , no reply, no remarks, amazing
hahmad78 said:
213 views , no reply, no remarks, amazing
Click to expand...
Click to collapse
because this does not work at all
DevilMind007 said:
because this does not work at all
Click to expand...
Click to collapse
dear it works, because i am using it. i have flashed it many times .
links are not working or software????
DevilMind007 said:
because this does not work at all
Click to expand...
Click to collapse
i have checked again, links are working and so do the softwares.
you have used these yourself , haa haa
hahmad78 said:
dear it works, because i am using it. i have flashed it many times .
links are not working or software????
Click to expand...
Click to collapse
im on v30c via kdz file
but can't root
also had same issue when i was on v10i kdz with this
DevilMind007 said:
im on v30c via kdz file
but can't root
also had same issue when i was on v10i kdz with this
Click to expand...
Click to collapse
This one actually works, enjoy: http://forum.xda-developers.com/showthread.php?t=2291757
2nd post, also check out the 6th post to get the non-secure boot.IMG so system apps can be removed without bricking the phone.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
This one actually works, enjoy: http://forum.xda-developers.com/showthread.php?t=2291757
2nd post, also check out the 6th post to get the non-secure boot.IMG so system apps can be removed without bricking the phone.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
get kdz file
http://csmgdl.lgmobile.com/swdata/WDLSW/LGSU640/ASKTBK/V30c_00/V30C_00.kdz
Repacked boot.img with insecure ramdisk to get rid of security error after removing system apps
https://dl.dropboxusercontent.com/u/12261361/insecure_boot.img
instruction:
rename as boot.img and put into sdcard root directory
type following adb commands
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot
NOTE/HELP:
how to use abd, i mean where is it in Win7 or inside android app?
thanks
DevilMind007 said:
get kdz file
http://csmgdl.lgmobile.com/swdata/WDLSW/LGSU640/ASKTBK/V30c_00/V30C_00.kdz
Repacked boot.img with insecure ramdisk to get rid of security error after removing system apps
https://dl.dropboxusercontent.com/u/12261361/insecure_boot.img
instruction:
rename as boot.img and put into sdcard root directory
type following adb commands
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot
NOTE/HELP:
how to use abd, i mean where is it in Win7 or inside android app?
thanks
Click to expand...
Click to collapse
It installs with the android SDK, Google it or adb.
Sent from my LG-P930 using xda app-developers app
it seems that your device drivers are not installed properly.install the device drivers , than follow the instructions, like turn on the usb de bugging mode in developer options and than connect the phone.and follow he instructions. i just checked these yesterday again.
dear, you problem has been solved or not. if not, than kindly tell me so that i could dig into this.
thanks for this! rooting does not seem to work, or I just don't understand Chinese? I rooted my phone using framaroot. the other file though works fine. it flashed a bootloader and a recovery image. very good indeed! thanks again.
Perfect!
hahmad78 said:
First of All, thanks to developers for keeping us trouble free by working and modifications for our mobiles.
2nd ,this is not my work.I had collected from a Vietnamese site.i am just posting to help others if they are facing the problem (like me) in rooting and recovery of latest jelly bean update v30c for lg su640.
THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS
PROCEDURE:
1. make sure you have installed latest lg drivers
2. turn on the debugging option in settings/developers options
3.now connect the phone with computer, a pop up window appears on phone, select lg software there.
4.now go to the root v30c folder and run the bat file.and press any key to continue
5.message will appear on running window, now disconnect mobile from computer and turn of debugging mode for 5 seconds.
6.now turn on debugging mode again and connect the phone with computer and press any key to continue.
7.if all goes well, you will see a message that mobile is rooted, enjoy.
if it is rooted than go for cwm recovery installation.
1.run the ''run me.bat'' file placed in folder downloaded.
2. if every thing goes well, you will see some figures (numbers) in and out.if it is so, hurray, you have installed recovery properly.
mobile will reboot and go to recovery.
Quote:
***************************** CREDITS TO ALL THE DEVELOPERS *******************************
LINKS FOR FILES
JB ROOTING
https://docs.google.com/file/d/0BwuJnNfF1xTnb21pR1Z6NDNyeXc/edit
JB RECOVERY
http://www.mediafire.com/download/1j9zcbkahhakrb5/cwm_su_640.rar
Click to expand...
Click to collapse
It worked perfectly for me
JB RECOVERY
http://www.mediafire.com/download/1j9zcbkahhakrb5/cwm_su_640.rar[/QUOTE]
link not working very well. DL stalls.
Since the last update tool LGTool should we not also use the tool to flash KDZ as usual anymore. So we have to do it this way. Thanks @ Cloudyfa The Mod note KDZ update instructions for the box. @ blueberry chucvnvn @ @ gts8003 @ xuanduc89 ... Cloudyfa said :: ↑ faulty LG FlashTool You can try to do it this way:
1.Download file: http://www.androidfilehost.com/?fid=23329332407577839 Cloudyfa said :: ↑
2. Delete the folder C: \ ProgramData \ LGMOBILEAX folder and replace it with LGMOBILEAX extract from the file.
3. Open file Windows/System32/Drivers/etc/hosts with Admin rights. Add the following lines: Code:127.0.0.1 csmg.lgmobile.com
4. Download firmware update tool: http://www.androidfilehost.com/?fid=23329332407577842
5. Download Small HTTP
Server: http://www.androidfilehost.com/?fid=23329332407577847
6. Http.exe run before running LGFlashtool
7. Take steps up KDZ or TOT as normal or do. * 1 However, some anti-virus software will detect this soft mistaken, to allow it, and decided to spend it is up to you ok. Click to expand .. . SOURCE LG VIETNAM
How to modify the host file
1. Click Start -> All Programs -> Accessories
2. Right click Notepad and select Run as administrator
3. Click Continue on the "Windows needs your permission" UAC window.
4. When Notepad opens Click File -> Open
5. In the filename field type C:\Windows\System32\Drivers\etc\hosts
6. Click Open
I always get "Battery Level to Low" but my phone is even charged, dont know what i can do.
and when i use kdz_fw_upd i always get "extract file error"
Does someone knows what to do?
bricked my phone after updated my rooted e986 OTA. now i want to restore it back to stock.
Does the phone charge when it is in the cwm recovery?
Thanks bro! you are my life saver. Im deciding to go down to LG service centre tomorrow due to bad flash and now follow your steps, im able to restore back to factory!! Thanks again.
basicone1 said:
I always get "Battery Level to Low" but my phone is even charged, dont know what i can do.
and when i use kdz_fw_upd i always get "extract file error"
Does someone knows what to do?
bricked my phone after updated my rooted e986 OTA. now i want to restore it back to stock.
Does the phone charge when it is in the cwm recovery?
Click to expand...
Click to collapse
try uninstalling everything then install again everything or flash it using another computer
kongming said:
Thanks bro! you are my life saver. Im deciding to go down to LG service centre tomorrow due to bad flash and now follow your steps, im able to restore back to factory!! Thanks again.
Click to expand...
Click to collapse
no problem glad to help
Mr.Gabo said:
try uninstalling everything then install again everything or flash it using another computer
Click to expand...
Click to collapse
tried it on 3 different computers... so i dont think thats the problem
basicone1 said:
tried it on 3 different computers... so i dont think thats the problem
Click to expand...
Click to collapse
try flashing using tot file
I selected "cdma" at "select type" in the left corner of the R&D test tool window. Then the option CSE web upgrade test button appears, Clicked on this and no low battery warning this time. Phone is back to live (F240S)! Flashed the v20c 4.4.2 file for F240S.
Can anyone help me?
I flash a wrong recovery then it cnnot go to
download mode.they say that i need to jtag it
Can i do it my self?
Please help me
give me some instruction on how to jtag it
(LG G3 F400L)
Stiffmeistro said:
Can anyone help me?
I flash a wrong recovery then it cnnot go to
download mode.they say that i need to jtag it
Can i do it my self?
Please help me
give me some instruction on how to jtag it
(LG G3 F400L)
Click to expand...
Click to collapse
hello, if there is no juice, you can try to do as I did to my D855, I think it is the same, you will need to open your device and make a trick to go to downlaod mode.
IT is very esay that I put my LG G3 in download mode in 3minutes.
---------- Post added at 02:19 AM ---------- Previous post was at 02:08 AM ----------
just go with this guide , it is good.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I did like it said and I got my phone repaired.
But, in step 8, I suggest you to not flash all stuff, because I think It is not necessary, I am pretty sure this was my cause to have the message : "Can't find matched cust for NT-code mcc/mnc"
I hard bricked my phone a second time, but instead of doing step 8 like he says. I just Made SDRAM test also and start. it will flash necessary stuff and reboot phone automatically.
To make a summary of what you need to do:
-- first put your windows in test mode if you have windows 64bits and install drivers
1-put your phone in download mode (screen off and without battery-sort of emergency download mode)
2-run boarddiag by willcracker and extract your Bin file in a folder.
3-choose port and choose folder
4-run the AP check and EMMC test
5-Run AP check, Emmc test and SDRAM test
6-phone will reboot
7-put him in download mode and flash you tot file
Done!
all files in the link
majorak said:
hello, if there is no juice, you can try to do as I did to my D855, I think it is the same, you will need to open your device and make a trick to go to downlaod mode.
IT is very esay that I put my LG G3 in download mode in 3minutes.
---------- Post added at 02:19 AM ---------- Previous post was at 02:08 AM ----------
just go with this guide , it is good.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I did like it said and I got my phone repaired.
But, in step 8, I suggest you to not flash all stuff, because I think It is not necessary, I am pretty sure this was my cause to have the message : "Can't find matched cust for NT-code mcc/mnc"
I hard bricked my phone a second time, but instead of doing step 8 like he says. I just Made SDRAM test also and start. it will flash necessary stuff and reboot phone automatically.
To make a summary of what you need to do:
-- first put your windows in test mode if you have windows 64bits and install drivers
1-put your phone in download mode (screen off and without battery-sort of emergency download mode)
2-run boarddiag by willcracker and extract your Bin file in a folder.
3-choose port and choose folder
4-run the AP check and EMMC test
5-Run AP check, Emmc test and SDRAM test
6-phone will reboot
7-put him in download mode and flash you tot file
Done!
all files in the link
Click to expand...
Click to collapse
Can you explain the step 6-10 in the link you gave to me?
i understand it but i don't know if when i will click the start
btw i did not do anything yet,something is not right in my phone
there's still led lights when im charging sir then suddenly it will begone in a few minutes.
Stiffmeistro said:
Can you explain the step 6-10 in the link you gave to me?
i understand it but i don't know if when i will click the start
btw i did not do anything yet,something is not right in my phone
there's still led lights when im charging sir then suddenly it will begone in a few minutes.
Click to expand...
Click to collapse
first, just skip steps 8 and 9 and replace it with:
it is a little bit mixed up but this is what he wanted to say:
6- choose port and folder where you extracted TOT file.
7- Check "AP" and "EMMC" and press start
here you finished with the link.
8+9- you need to Check "AP" and "EMMC" and SDRAM , click Start.
10-flash you phone with LGUP using Refurbish and choosing the tot file. (I prefer LG UP)
download here:
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 (do not install DLL file from this link)
but first install DLL file: http://downloads.codefi.re/autoprime/LG/LG_G3/LGUP_8974_DLL_Ver_0_5_CODEFIRE.MSI
majorak said:
first, just skip steps 8 and 9 and replace it with:
it is a little bit mixed up but this is what he wanted to say:
6- choose port and folder where you extracted TOT file.
7- Check "AP" and "EMMC" and press start
here you finished with the link.
8+9- you need to Check "AP" and "EMMC" and SDRAM , click Start.
10-flash you phone with LGUP using Refurbish and choosing the tot file. (I prefer LG UP)
download here:
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 (do not install DLL file from this link)
but first install DLL file: http://downloads.codefi.re/autoprime/LG/LG_G3/LGUP_8974_DLL_Ver_0_5_CODEFIRE.MSI
Click to expand...
Click to collapse
Are you sure this is gonna work?
is this the method you use to your phone?
because i'm gonna do it
where did you get your method or what you did on your phone?
not the link you gave to me but the method you use
Stiffmeistro said:
Are you sure this is gonna work?
is this the method you use to your phone?
because i'm gonna do it
where did you get your method or what you did on your phone?
not the link you gave to me but the method you use
Click to expand...
Click to collapse
II followed the steps in this link as I sayed, but after that I recognised that I had to modify it a little (as I described also)
majorak said:
II followed the steps in this link as I sayed, but after that I recognised that I had to modify it a little (as I described also)
Click to expand...
Click to collapse
MAN, Thanks a lot!!!!!
I just follow your instruction and BAM!!
It work sir
MANY MANY THANKS :good: :fingers-crossed:
Stiffmeistro said:
MAN, Thanks a lot!!!!!
I just follow your instruction and BAM!!
It work sir
MANY MANY THANKS :good: :fingers-crossed:
Click to expand...
Click to collapse
I'm glad you fixed your G3, it is a very good phone
Hello!
I tried to update my Vodafone Branded G4 with the europe not branded version H81520g_00_0720.kdz
The problem ist i just get "error code = 0x2000, invalid command response" from the LGUP software and everytime i start the phone it is in firmware update mode.
Any idea how to fix this?
Greetings
I got this too as I tried to install H81520o_00_0310.kdz then I thought that it is maybe related to the brand. So I download your kdz file and then it was working.
So I would guess try another number is the best what you can do. I believe it is because of selection of "upgrade". If you have a tot file for refurbish, then maybe another is working, but I didn't do this yet.
Probably the problem is the DLL.
Extract the DLL from the KDZ (the one you want to flash) and replace it with the one you have in LGUP (path; C:/Program files/LG Electronics/LGUP/Model/8992).
the_naxhoo said:
Probably the problem is the DLL.
Extract the DLL from the KDZ (the one you want to flash) and replace it with the one you have in LGUP (path; C:/Program files/LG Electronics/LGUP/Model/8992).
Click to expand...
Click to collapse
i have the same problem2.
all the kdz that i download not come with any dll files just a 1.73 gb one file size.
kobisa25 said:
i have the same problem2.
all the kdz that i download not come with any dll files just a 1.73 gb one file size.
Click to expand...
Click to collapse
you must extract it from the KDZ with this tool: Click Here
the_naxhoo said:
you must extract it from the KDZ with this tool: Click Here
Click to expand...
Click to collapse
hi so i extract the kdz from LGExtract&7za& manuall tool& when i use winrar to extract its tell me no archive found i try also in winzip software. do you have any idea what else 2do?
thank you.
You can also try the codefire dll: http://downloads.codefi.re/autoprime/LG/LG_G4
( Download and rename LGFLASH_LG_G4_CODEFIRE.dll )
sfX
GOT IT!
the_naxhoo said:
you must extract it from the KDZ with this tool: Click Here
Click to expand...
Click to collapse
so after a long long search and dosents off error i succeeded
i find the currect kdz ISRAEL one and from it i EXTRACT it with WindowsLGFirmwareExtract-1.2.5.0-Release dll file and downgraded to lollipop 5.5 only with this dll file i make it after i try a few rom stocks that work with the dll.
i want to thank you you direct me to the right way:good:
Hi,
I have LG H811 (T-Mobile) Variant. I receive error from LGUP everytime I try to flash this ROM=h81120x_00_1108.kdz
My LGUP shows COM =COM3 and Version=H81120v
The error is thrown at 9%
Nothing working for me I am very frustrated!!!
PLEASE SOMEBODY HELP ME!
Stuck with LG G4 (H81520i)
Same for me but with LG H81520i. I tried to flash these ROM* with their specific .dll that I extracted thanks to WindowsLGFirmwareExtract-1.2.5.0-Release. Always get "error code = 0x2000, invalid command response" from LGUP. The error is thrown at 16% on the computer, but at 7% on the phone. Now, I'm stuck in download mode. I also tried to change the COM port number, doesn't change anything.
*Europe General H81510B_00.kdz ; Europe OPEN H81510D.kdz ; H81510D_00.kdz ; H81520i_00_0922.kdz ; SEA H81510B.kdz
Only one ROM above matches the LG H81520i (the fourth one).
Informations about my (ex-)android firmware :
- Android version : 6.0 (Marshmallow)
- Kernel version : 3.10.84
- Software version : V20-SEA-XX
PS : H81520i is what is written on the LGUP software
______________________________________________________________________________
I found a solution (after several hours)
Uninstall all your LG softwares (except LG Bridge or others LG backup softwares) and go to 'C:\Program Files (x86)\LG Electronics\' to delete all folders and files.
Go to this link and click on "Download all". Extract the file and follow the instructions :
1) Install "LGMobileSupportTool.exe"
2) Install "LGMobileDriver_WHQL_Ver_4.2.0.exe"
3) Install "LGUP_Install_Ver_1_14_3.msi"
4) Install "LGUP_8994_DLL_Ver_0_0_3_23.msi"
5) Move "LGUP_8994.dll" in the repertory 'C:\Program Files (x86)\LG Electronics\LGUP\model\8994'
6) Open "LGMobile Support Tool" and click on "Install USB driver." to the left
7) Select "LGH815" (or your model) et follow the drivers installation steps
8) Do step 5) again
9) Shut off your LG and plug it to your computer while pressing volume up in order to enter download mode
10) Unplug your LG and the battery
11) Open "LGUP" and close it
12) Do step 9 again (download mode)
13) Open "LGUP", select "UPGRADE" and go select your .kdz file (the ones in the file that you downloaded or another one you have)
14) Click on "Start" and DON'T TOUCH !!!!!!
Big thanks to the people of this reddit post and of this XDA thread
See above
Back To Stock ROM LG G4 H811 (T-Mobile)
LucasDupanne said:
________________________________________________________
First of all, I'm not allowed to post links as a new user , so I put them with spaces that you must delete :laugh: . Good luck !
Uninstall ALL your softwares (except LG Bridge or others LG backup softwares) and go to 'C:\Program Files (x86)\LG Electronics\' to delete all folders and files.
Go to this link ( ht tps : / / ya di . sk /d / KIG5F8 2jmXcUR ) and click on "Download all". After downloading the file, extract it and follow the instructions :
1) Install "LGMobileSupportTool.exe"
2) Install "LGMobileDriver_WHQL_Ver_4.2.0.exe"
3) Install "LGUP_Install_Ver_1_14_3.msi"
4) Install "LGUP_8994_DLL_Ver_0_0_3_23.msi"
5) Move "LGUP_8994.dll" in the repertory 'C:\Program Files (x86)\LG Electronics\LGUP\model\8994'
6) Open "LGMobile Support Tool" and click on "Install USB driver." to the left
7) Select "LGH815" et follow the drivers installation steps
8) Do step 5) again
9) Shut off your LG and plug it to your computer while pressing volume up in order to enter download mode
10) Unplug your LG and the battery
11) Open "LGUP" and shut it
12) Do again step 8 (download mode)
13) Open "LGUP", select "UPGRADE" and go select your .kdz file (your one or the ones in the file that you downloaded)
14) Click on "Start" and DON'T TOUCH !!!!!!
==>> thanks to ' ht tps : / / www .reddit . com /r/lgg4/comments/7anayg/downgraded_from_n_to_mm_and_stuck_in_download / ' post
A french man of 15 years that thanks Lobster_Johnson123 very very much.
PS : Sorry, my english is bad And let me know !!! :fingers-crossed:
Click to expand...
Click to collapse
Thanks Lucas for your time and help. It didn't work for me. I flashed another ROM named H811V20r_00_0111.kdz and it worked like a charm and it's tested on so many devices afterwards which worked fine without a single issue.
Here is the link to the ROM: https://lg-roms.com/official-firmware/LG G4-LGH811VK/H811V20r_00_0111/
Thanks for the help though.
androhead said:
Thanks Lucas for your time and help. It didn't work for me. I flashed another ROM named H811V20r_00_0111.kdz and it worked like a charm and it's tested on so many devices afterwards which worked fine without a single issue.
Here is the link to the ROM:
Thanks for the help though.
Click to expand...
Click to collapse
Happy it worked an other way for you !
i had working H815 version 29A nougat installed but for some reason
( nougat restarting issue ) during flashing H815 version 10d , after 9 percent same error comes , i tried by copying extracted dll from H815 v10d kdz in the LGUP (8994 folder) but nothing works for me,
please friends come to resolve my issue. waiting for reply from xda experts
Sanaullahshuaib said:
i had working H815 version 29A nougat installed but for some reason
( nougat restarting issue ) during flashing H815 version 10d , after 9 percent same error comes , i tried by copying extracted dll from H815 v10d kdz in the LGUP (8994 folder) but nothing works for me,
please friends come to resolve my issue. waiting for reply from xda experts
Click to expand...
Click to collapse
You need H81520p.kdz to downgrade from Nougat!
You can download from here: https://www.4shared.com/file/hfyqh6iEfi/H81520p_00_0314.html
Can also see here if you need more files: https://forum.xda-developers.com/showpost.php?p=76571471&postcount=23
Okay I'll try this but please tell me that
I have to copy lgup_8994.dll from H81520p or use original dll which is installed with the LGUP 8994 installer???
Sanaullahshuaib said:
Okay I'll try this but please tell me that
I have to copy lgup_8994.dll from H81520p or use original dll which is installed with the LGUP 8994 installer???
Click to expand...
Click to collapse
After install everything, replace the one in "C:\Program Files (x86)\LG Electronics\LGUP\model\8994" by the given one (or extract from the H81520p.kdz file).
See on the picture how your phone should be detected in "Device Manager":
http://i1376.photobucket.com/albums/ah39/RuedasLocas/Varios/Sem Tiacutetulo_zpsrrscdqov.jpg
H815v20p flashed correctly but mobile in boot-loop then i back installed H815v10d the original but also restarting
xda experts???
whats the issue in your mind experts XDA???
Sanaullahshuaib said:
H815v20p flashed correctly but mobile in boot-loop then i back installed H815v10d the original but also restarting
xda experts???
whats the issue in your mind experts XDA???
Click to expand...
Click to collapse
You first start your phone with any sim or sd card?
Try to flash it again with the v20p and restart it without any card on it.
If it doesn't solve the problem, try a v10a. Maybe it works and you can upgrade starting from there.
Good luck!
now again I tried H815v29A so it installed after the installation of old original version , now please tell the method of rooting Nougat on H815v29A urgently XDA experts???
also Twrp not installing on H815v29A which was working on marshmallow/////
experts reply???