Related
I`m flashing my device using JG5 but after starting it in flashing mode and connecting it to PC (Win7) i started Oding and got this errors.
Now it has puicture with text : do not turn off Target!!!!
What i have to do now?
View attachment 362424
I dont know what you should do, but theres 2 things I can see you did wrong - obviously you had issues reading the instructions in other threads....
1. You need the 512.pit file the 513.pit doesnt work
2. You need to check the re-partition box.
I suggest you go back and read these threads:
Flashing instructional using Odin:
http://forum.xda-developers.com/showthread.php?t=723596
& the JG5 thread which reveals all
http://forum.xda-developers.com/showthread.php?t=725194
Ok fine,
So where can i find the link to 512 pit? Can`t find it here or sams-firmwares...
Can i turn off the device for now and try again?
Why are there two COM ports active in that screenshot? Did you unplug the phone and then plug it into a different USB?
The pit file can be found at the end of this post: http://forum.xda-developers.com/showpost.php?p=7180787&postcount=32
No, have no idea why... I did everything by instruction (but did not remove sim/sd)
I restarted it and second time (i closed Kies) it flashed without any problems...
Thread can be closed.
cheetah2k said:
I dont know what you should do, but theres 2 things I can see you did wrong - obviously you had issues reading the instructions in other threads....
1. You need the 512.pit file the 513.pit doesnt work
2. You need to check the re-partition box.
I suggest you go back and read these threads:
Flashing instructional using Odin:
http://forum.xda-developers.com/showthread.php?t=723596
& the JG5 thread which reveals all
http://forum.xda-developers.com/showthread.php?t=725194
Click to expand...
Click to collapse
well, actually, i successfully flashed JG5 with 513 and re-partition unchecked.
Hey guys im having a bit of an issue when trying to flash the official FCO6 Stock rom through odin. I have v1.85 and 1.87 and both show the same thing. I have the victory pit file and the SPH-D700-FC09-8GB-REL.TAR.MD5 file both on my desktop but when my phone is plugged in and ready to go, and I click PDA on odin and go to desktop, it isn't their. The victory file shows up and I place that In it's correct place but the md5 does not. No matter where I put it? anyone have any suggestions so I can odin my phone?
try erasing the .md5 part at the end
Try the phone slot instead.
Sent from my GT-P7510 using Tapatalk 2
Hey guys I have this exact same problem right now. My phone is in a bootloop so I am trying to odin back to stock but the FC09 file will not show up. I have tried removing the .md5 as well but that does not work either. I have tried deleting and re-downloading 3 times. I know the file is there 100% and I know I am looking in the right folder 100%.
edit: this is odin 1.87 and I have tried the phone slot with the same results.
edit #2: I am sure someone else will run into this problem someday since two of us have. Apparently this is the only file you will ever unzip. I have it so ground into my head to never unzip anything I didn't think of that
danipoak said:
Hey guys I have this exact same problem right now. My phone is in a bootloop so I am trying to odin back to stock but the FC09 file will not show up. I have tried removing the .md5 as well but that does not work either. I have tried deleting and re-downloading 3 times. I know the file is there 100% and I know I am looking in the right folder 100%.
edit: this is odin 1.87 and I have tried the phone slot with the same results.
edit #2: I am sure someone else will run into this problem someday since two of us have. Apparently this is the only file you will ever unzip. I have it so ground into my head to never unzip anything I didn't think of that
Click to expand...
Click to collapse
Try the updated version of Odin. http://db.tt/OIEtTUxn
Hi I was rooted using cmenards int rom and I decided top use odin to go back to stock so I could do the update so I can get the new modem. It is how I have always done things when an update comes out even though I know I am going to root and use a custom I like to have a currrent stock backup and the latest modem. I am not new to this.so I dont know what is up.
I am using pc odin 3.07 i put the file in PDA and I tried to install the twrp with odin and it says that it worked but when I boot into recovery it is still stock. So I tried the CWM for the 7100 with the same results. (both of them I have used before with no problem) So I tried to redownload everything still the same resutls then I tried resetting everything and no luck. I gotta say I am stumped. The only thing I can think of is I was going to use kies to do the update but it was on my pc before but It hads to do an update so maybe the updated version of kies is doing something annd as it turned out I didnt need to use kies I just used the ota. So I am uninstalling it now as I type but I dont think it will do anything.
Can anyone help me please?
mojorisin7178 said:
Hi I was rooted using cmenards int rom and I decided top use odin to go back to stock so I could do the update so I can get the new modem. It is how I have always done things when an update comes out even though I know I am going to root and use a custom I like to have a currrent stock backup and the latest modem. I am not new to this.so I dont know what is up.
I am using pc odin 3.07 i put the file in PDA and I tried to install the twrp with odin and it says that it worked but when I boot into recovery it is still stock. So I tried the CWM for the 7100 with the same results. (both of them I have used before with no problem) So I tried to redownload everything still the same resutls then I tried resetting everything and no luck. I gotta say I am stumped. The only thing I can think of is I was going to use kies to do the update but it was on my pc before but It hads to do an update so maybe the updated version of kies is doing something annd as it turned out I didnt need to use kies I just used the ota. So I am uninstalling it now as I type but I dont think it will do anything.
Can anyone help me please?
Click to expand...
Click to collapse
It's a known issue on newer android devices, it will automatically reflash the stock recovery. Try using goomanager or exynos abuse, I'm positive one will ask you if you want to disable it (I remeber it popping up)
Oooh I read about that so thats what it is. Goo manager does not work I tried but what is ths other thing. I guess I have to get it here? I will google it I see it is not in market thank you. So if that does not work how do I get around this?
Okay I figured it out. And I actually didnt even haver to hook up to my pc. I was ****ting (which is where I come up with all my good ideas.) And I remember reading about the security hole in the exynos processor and the app chainfire came up with. Which turns out to be the exynos abuse app that killahurtz was talking about. So I remembered that with the app you can use the exploit to root so I downloaded the .apk and installed and rooted and then used goo.im app to install the latest twrp. So thanks to killahurtz for recomending it and chainfire for the app and exploit and samsung for being a little bit dopey One thing I am still wondering is how would you solve this problem if the security hole did not exist? I know I saw something in the toolkit about it So if this didnt work would In have been able to hookup tob the pc and use the toolkit without having root access?
In ExynosAbuse, it gives you the option to plug the hole after you have rooted, only thing is you may break your camera in the process. I would just stay away from pirated and sketchy apps for now.
Hello All,
I have this samsung galaxy note 2 locked with telus canada. Right now its stuck on samsung logo screen.
1) I have tried factory reset but i cannot enter that menu , its just keep on coming back to samsung logo.
I have tried to put it in download mode and tried stock rom with ODIN but it shows failed after few seconds
2) i have tried to install TWRP on it and tried to wipe thru that but same problem, right now its showing no OS installed in it
3) I tried to bring it to stock after putting stock rom in a SD card and tried it access SD card from TWRP but its not recognizing SD card, I have tried to replace sim card+ sd card tray on motherboard just to rule out if there is any hardware issue
4) I have tried to mount SD card thru TWRP but its keep on coming back with lots of error messages ( picture attached)
5) tried advanced wipe in TWRP but lot of error messages again ( picture attached)
I am trying to find a rescue firmware or emergency firmware for samsung galaxy note 2 i317M , if any body know a reliable link please let me know or any other advice will be appreciated .
if you need any other information from my side please let me know
Thanks in advance
What is the model of the note 2 as that may help others in finding a solution to the problems that you are facing with your note 2
Same problem happened to me after 2/3 days after mounting the "rom DN4". Now I connect it to my computer and is easily recognized by Odin but I try to install the original firmware, the process is successful but in reality nothing happens. As if it would record more changes !!!! I hope we can help !! I include photos of recovery !!!!
Model number for note 2 is SGH-i317M , sorry i forgot to mention that in my post, and it came with Telus , Canada
Brownpanda said:
Model number for note 2 is SGH-i317M , sorry i forgot to mention that in my post, and it came with Telus , Canada
Click to expand...
Click to collapse
Hello ,
I thing the best should be :
Download the original rom from SamMobile.
Install it with odin PC
Root the rom
After, if you want , install a custom rom.
I hope that can help you.
It's something that I thought I'd do, but as I wrote, even if the writing process through Odin is reported as successful by both Odin that the phone itself with the advancement of the bar, actually it is not !! I tried to install both original rom 4.1 is 4.4, different bootloader and recovery original but nothing to do !! I hope you have other solutions to help us. Thanks in advance !!!
Cardone71 said:
It's something that I thought I'd do, but as I wrote, even if the writing process through Odin is reported as successful by both Odin that the phone itself with the advancement of the bar, actually it is not !! I tried to install both original rom 4.1 is 4.4, different bootloader and recovery original but nothing to do !! I hope you have other solutions to help us. Thanks in advance !!!
Click to expand...
Click to collapse
It's your rom a full wipe rom ?
Have you try with an other version of Odin ? .I had a problem with Odin PC 3.09 but it worked with Odin PC 3.07.
No, the rom was not full wipe. Unfortunately however through Ricovery wipe function does not work as per attached photos. Basically it is as if the phone would not see more memories, in fact marks 0 mb available, but this gives me hope that it's a problem of folder and fs / partitions corrupt, because removing the sd 64gb I filled in the computer works fine again! ! But how to solve it ???? I tried different versions of Odin from 3 to 3:09 !!!
Sorry cardone , no offence , please start your own thread , as you are confusing everything here , I started this thread and nobody is replying to my questions here
Ok, I'm sorry, but I thought that having the same problem or answer me or you do not change !! Anyway I open another 3d. Until next time !!
Cardone71 said:
Ok, I'm sorry, but I thought that having the same problem or answer me or you do not change !! Anyway I open another 3d. Until next time !!
Click to expand...
Click to collapse
Thanks for understanding Cardone , Please visit this thread if any of suggestion helps you
Could anybody please help me to fix this SGH-i317M note 2 locked with telus canada
Plz let me know if i can find any rescue or emergency firmware for this phone or any other suggestion ?
Brownpanda said:
Could anybody please help me to fix this SGH-i317M note 2 locked with telus canada
Plz let me know if i can find any rescue or emergency firmware for this phone or any other suggestion ?
Click to expand...
Click to collapse
Hi,
have you try to install an original Samsung rom with Odin PC ?
It's possible TWRP doesn't work well if your phone are locked =Can another user confirme that ?
Cardone71 said:
Same problem happened to me after 2/3 days after mounting the "rom DN4". Now I connect it to my computer and is easily recognized by Odin but I try to install the original firmware, the process is successful but in reality nothing happens. As if it would record more changes !!!! I hope we can help !! I include photos of recovery !!!!
Click to expand...
Click to collapse
X Brownpanda
Finally, after you've tried everything and more without solving the problem I took it in for service. They told me that if it's a software problem (that has corrupted the partition) to others happened like that, is not to cost more than € 20 .......
I hope so !!! Then you update !!
Brownpanda said:
Could anybody please help me to fix this SGH-i317M note 2 locked with telus canada
Plz let me know if i can find any rescue or emergency firmware for this phone or any other suggestion ?
Click to expand...
Click to collapse
Perhaps you can try flashing twrp recovery again to see if it picks up SD card.
Try flashing a split firmware with re partition enabled and a pit file for your particular model .
If same problem persists then it might be emmc ic problem ( a hardware issue and you need to get it replaced ).
Thanks Sachin , could you please let me know what is the difference between split firmware and stock firmware ? where can i find split firmware for this particular model ?
I am not worrying too much about bricking this phone anyways coz i have tried every other option available here and its already semi bricked now. i would really appreciate if i can make it work anyways. I posted this post almost 2 weeks ago so i guess most of other readers are out of ideas too now. so i would like to go for pit file option now. Please help me in this i have never tried this option before.
s
Brownpanda said:
Thanks Sachin , could you please let me know what is the difference between split firmware and stock firmware ? where can i find split firmware for this particular model ?
I am not worrying too much about bricking this phone anyways coz i have tried every other option available here and its already semi bricked now. i would really appreciate if i can make it work anyways. I posted this post almost 2 weeks ago so i guess most of other readers are out of ideas too now. so i would like to go for pit file option now. Please help me in this i have never tried this option before.
s
Click to expand...
Click to collapse
Split firmware means separate files for ap, cp, csc, bootloader in odin instead of single file in ap. U have to search for it. And also for pit file for your model.
Then flash it using odin with pit file also selected and re partition enabled.
If this do not solve problem. Then its emmc issue. Get it replaced.
sachinwadhwa46 said:
Split firmware means separate files for ap, cp, csc, bootloader in odin instead of single file in ap. U have to search for it. And also for pit file for your model.
Then flash it using odin with pit file also selected and re partition enabled.
If this do not solve problem. Then its emmc issue. Get it replaced.
Click to expand...
Click to collapse
Thanks for your help sachin, could you please let me know where i can find all these split files for my model its i747M canadian network locked to telus canada. I am trying to find all these files but most of the places are providing only PDA file. Please help me in this or please let me know some keywords how can i search them.
sachinwadhwa46 said:
Split firmware means separate files for ap, cp, csc, bootloader in odin instead of single file in ap. U have to search for it. And also for pit file for your model.
Then flash it using odin with pit file also selected and re partition enabled.
If this do not solve problem. Then its emmc issue. Get it replaced.
Click to expand...
Click to collapse
Any Help Sachin , Could you please help me to find separate files for this model ?
Good evening folks. I hope I'm posting in the correct place.
First id like to start off thanking everyone for whatever help I can get. I know I've come to the place where I can get some help.
I apologize in advance If I'm lacking any info in my post.
I REALLY NEED HELP.:crying::crying::crying:
I have a rooted metro pcs galaxy s4
I have recently started having a really slow phone. Slow is a understatement actually.
Everything freezes up and I cant do anything with it. I DO have root access.
Anything I try to do such as enter the phone settings, an app or simply try make a call just seems to take a ton of processing power and eventually glitches or freezes up and force closes themselves.
It reminds me of a computer that doesn't have enough memory in it.
I installed some app in the play store that required root access called adjbrightness and ever since then my phone has been crazy slow with apps and services crashing.
I cannot be certain this app had anythinto do with my problem though.
I cant even make a call Its soooo bad.. GGRRrrrrrrrrr......:crying::crying::crying:
I installed one click kango root about a month ago and definitely haven't had any problems until about a week or so ago.
Since then iv tried everything. I'm pretty good with android phones too. I'm always helping ppl fix slow phones or computers.
I fear I may have force stopped or disabled a critical system function or service by accident.
Iv done the following already...
-Factory reset first then uninstalled the root.
-Ever since I unrooted today, I am unsure if I can or should or even could do a factory reset now. Because if I try to do it upon reboot, a warning states that installing custom roms can be damaging to my phone. Um.... Yikes!
-I formatted and removed my SD card.
-Prior to unrooting I did do factory reset several times without results.
I'm really freaking out.
I know this was something that could happen upon rooting as a risk I was taking.
I feel this issue was somehow due to the root access ultimately and that something in the rom (or what not) is glitching badly or some code is just missing.
- I never installed custom rom or messed with the rom that I know of.
-I never messed with any kernels or clocking methods because that's all too scary for me.
-I really didn't mess with things I didn't understand.
I rooted mainly to save battery and ditch some factory bloatware. I'm sure yall can relate.
Oh and I didn't download anything from porn sites, don't worry. HAHA.
Pleeeeeeese, please PLEASE, help lead me on the right path and I will be your best friend for ever.... I just haven't a clue what the issue could be. :crying::crying::crying:
Thank you so much for any and all help in advance.
THX!!!!! K++
---------- Post added at 04:43 AM ---------- Previous post was at 04:36 AM ----------
I would suggest you download the latest metropcs firmware for your device and flash with Odin. Don't worry about the warning, it's supposed to say that. Hopefully you don't have any important info or media that you haven't backed up. If so, back it up before you flash. After the flash, boot straight into recovery and do a factory reset. After that you will start off fresh and your phone should be back to normal
Sent from my SM-G920T using Tapatalk
please help
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
besthomeguy said:
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
Click to expand...
Click to collapse
Try 3.09, AP=PDA.
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
I see now that im suppose to extract the tar file from the 7zip/zip archive, yet I see no file with that name or extension to do so. Sorry...
besthomeguy said:
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
Click to expand...
Click to collapse
Just saw this right now and if you still need help I might be able to help. I'm also on MetroPCS. That firmware you downloaded is a t-mobile one and I'm not sure what version it is but download the stock one from this thread http://forum.xda-developers.com/gal...tock-base-metropcs-4-4-4-fni3-galaxy-t2899701 then flash it in Odin . After flashing it set it up and all that stuff and do the software update. It'll update your modem to NK3 which is the latest. I'd say use it for about a week and see if it's good or you can just root it right away if you want. I used CF auto root for M919 to root my M919N (MetroPCS version of the S4). For recovery I use TWRP jfltmo. After that just make a backup and keep it on your computer or SD card just incase something happens again so you can flash the backup. If you want to flash a ROM I recommend Hispasian ROM (currently using) or Insane Hybrid. Both are really stable and fast ROMS.
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....