Related
Hi guys. Im a noob, first post here and need some help. Be searching all day for how to load a stock rom to my device GT-N5110.
Heres the low down.
Purchased in Australia. No updates applied.
Success rooted with framaroot.Was running framaroot for more than a month
Install busy box today in normal mode I think. I chose the safe option.
Edited build.prop product model so I could install Navigon
Navigon working fine
Now..........
Unable to change the product name back using es explorer or file expert.
Thought it would change after restart but device entered bootloop. I think busybox was the culprit.
Discovered recovery mode and did factory data reset. Can acces odin screen on device too.
Device boots but hangs on language selection screen
I have found and downloaded stock rom for it that I found here somehow
I tried "Mrjraider" tutorial "how to flash back to a stock rom"
but odin crashes whenever I load the rom file and it wont recognize my GN8.0
Computer runs on windows 8. Kies is up to date too. Kies reconizes device but is unable to update or anything
Was running odin in win xp sp3 with administrator
can try on a win7 computer tomorrow.
This is the name of the file its about 1.2 Gb....... N5110UEDMD1_N5110XARDMD1_HOME.tar.md5 do I need to rename this or something
There was also a .dll that was in the package, wtf with that?????
be looking through this forum all day and night and cant quite find what im looking for. If what I seek is here please point me to it. Or if any one here in Brisbane, can fix it for me,What are your thoghts? PM me.
Just want my baby back working again.
Sorry, wrong section please delete mod
If I'm not mistaken, remove Kies, then try using Odin. Also, dll is a Windows file. I could be wrong about Kies, but I think I remember reading that it conflicts with Odin.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2
Yesterday I installed same firmware in my computer runing win7 with Odin and Kies installed at the same time without problems. You don't need to rename the file, dll is a library for windows and needs to be on the same folder as the md5 file. Just remember to put the Note in download mode in order to get the firmware installed by Odin.
I have a thread in the development forum with the only file you need just flash in odin and done.
Sent from my GT-N5110 using Tapatalk 2
Tutorial is ok, problem seems to be elsewhere.
I have Windows 8 (x64) too, and Odin works i my case, i successfully flashed (and restored counter) N5110 before returning tablet to shop (it was exchange for N5100). Kill all Kies components via task manager, i have two more things in processes when i quit Kies. Next, try another version of Odin, but I remember one ROM from SamMobile, which crashed every Odin i had, so its may be this problem. Try another version of ROM - older, if exists. If crashes Odin too or not exists, try uninstall both Kies and Samsung USB driver, dowload toolkit from xda (http://forum.xda-developers.com/showthread.php?t=2251033) and install new driver via toolkit.
In rare cases may be problem in your computer, so try another one without installing Kies. I wish you luck.
Edit - That big file is ROM, dll is not needed for Odin. Run Odin, press PDA, select your rom. Turn tablet off, connect to comupter by original or hi-quality short cable, set tablet into download mode (hold vol- and home, press power on for 2 secs, select continue by pressing vol+). If all is ok, first field in Odin change color to yellow (i think), then press "Start".
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
This is the kind of story that are the most scary. Now I am kind afraid of root my note 8 or do anything unofficial.
Anyway, best wishes to you.
mickatron said:
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
Click to expand...
Click to collapse
That's what I use odin 3.07 . Don't use the other versions for some reason they don't work
Secondly guys when you download that file in my thread tO your computer it has to be extracted first you only Click PDA In ODIN and use the file you just extracted with the tar md5 extension. Thats it. That ss.dll file has no purpose its just there and you need not even bother with it.
Sent from my GT-N5110 using Tapatalk 2
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
ROM
lanwarrior said:
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
Click to expand...
Click to collapse
Will these two links help you:
Link 1
Link 2
AkiOrpheus said:
Will these two links help you:
Link 1
Link 2
Click to expand...
Click to collapse
I have checked that, but I don't see US Note 8.0. The search seems broken to, since United States is not shown in the list of country for Note 8.0
No one knows how to get the stock US based ROM?
lanwarrior said:
No one knows how to get the stock US based ROM?
Click to expand...
Click to collapse
@lanwarrior
U have to register on sammobile.com to download firmwares (stock ROM). Put the model as SGH-i467 and u will the file
AkiOrpheus said:
Will these two links help you:
Click to expand...
Click to collapse
people keep posting to go to sammobile but every time i look there isn't a rom labeled for the US, and they dont give an explanation of what rom would be the equivilant or even if any of them would be. Should I use UK version? is it the same as the US?
I'm having the same exact issue as OP and I can get into download mode and i have odin 3.07 but i am just looking for the exact rom to load and cant find an exact answer so far. I've already messed up my tablet enough today so I don't want to flash the wrong rom and make things worse lol.
K
O
F
ps I looked for janjansen's thread in development and did not see it, am I missing something? anyone got a link?
ok I did some more reading around the web and found that a lot of people used the UK version as I kinda suspected. Would have been nice to get confirmation on that but its cool, I flashed it, no problem, and now I'm setting up the chainfire root and getting back all my apps. So all in all it took a few days but I'm back on my feet *sigh of relief*
K
O
F
Hello,
I'm struggeling for a while now with a Galaxy Ace 2 (I8160). It started with "hanging" in the bootscreen (logo and type). Recovery mode was not accessable. Downlaod mode was accessable. Connection with the much beloved KIES was not possible. However connection with ODIN 3.07 no problem. So I downlaoded the appropriate Andriod (4.2) file with the XEN (Dutch) countrycode. After extracting it became a single tar.MD5 file of some 800 kB.
As said ODIN connected to the Ace and reported the file entered in PDA "valid" and said "Checking MD5 successfully".
After pressing start the following announcements came:
> Get PIT for mapping
> Firmware update start
> Kernel.bin.MD5
> NAND write start
And after waiting for a long time.
> Complete (write) operation failed.
After this the ACE became even more stuborn. Most of the times after (it doen not matter whether normal, or downlaod or restore mode) start up it reports that "Firmware upgrade encounterd an issue" and it requires me to go to KIES, which I cannot access.
Sometimes I'm Lucky and the ACE enters into the downloadmode. If so I tried to reflash again with a different version of ODIN but without any luck. It just does not work.
Does anyone have a suggestion what to do? Should I see any grafic inidication of progress in ODIN while the flashing progress is going on?
Kind regards,
Dave
We don't have androod 4.2 stock
Maybe you used The wrong file, dont use kies to update either
Sent from my GT-I8160 using Tapatalk
Repartition and reflash with 3-part firmware (like MB4.zip -- PIT in PIT, CODE in PDA, CSC in CSC)
Also, the "use Kies to repair" screen is download mode (with a different logo)
Galaxy Ace 2 problem
Ryccardo said:
Repartition and reflash with 3-part firmware (like MB4.zip -- PIT in PIT, CODE in PDA, CSC in CSC)
Also, the "use Kies to repair" screen is download mode (with a different logo)
Click to expand...
Click to collapse
Hello,
Thank you for your answers. I mis-typed the Android version. It was 4.1.2. I downloaded it as a Stock File named XEN-I8160XXMF1020130727121805.ZIP (540 kB). Extracted it produces only one single file (*.tar.MD5) of about 912 kB. This file was placed in de PDA category of Odin, with no luck.
Until now I cannot find a 3-part firmwarefile. I have been Googling for the MB4.zip, but can only find rubish and no clean version. I also heard the suggestion that there might be differences between firmware for the I8160P and I8160I version. However cannot find these different files. The file name as mentioned above (I8160XX) seems tot suggest it is suitable for multiple types. Hope somebody can help me out.
Regards,
Dave
dbotop said:
Hello,
Thank you for your answers. I mis-typed the Android version. It was 4.1.2. I downloaded it as a Stock File named XEN-I8160XXMF1020130727121805.ZIP (540 kB). Extracted it produces only one single file (*.tar.MD5) of about 912 kB. This file was placed in de PDA category of Odin, with no luck.
Until now I cannot find a 3-part firmwarefile. I have been Googling for the MB4.zip, but can only find rubish and no clean version. I also heard the suggestion that there might be differences between firmware for the I8160P and I8160I version. However cannot find these different files. The file name as mentioned above (I8160XX) seems tot suggest it is suitable for multiple types. Hope somebody can help me out.
Regards,
Dave
Click to expand...
Click to collapse
Theres a leaked mb2 greece 3 part fw 4.1.2, you habent searched finished. Techfusions created a video in yt, go check it out
Sent from my GT-I8160 using Tapatalk
Samsung Ace 2
teddytsen said:
Theres a leaked mb2 greece 3 part fw 4.1.2, you habent searched finished. Techfusions created a video in yt, go check it out
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
I found the files a while ago. However the Ace 2 ran out of battery. I charged the battery manually. For some reason the Phone did not want to start at all anymore. So I finally decided to sent it to the Samsung service station as it was still within the quarantee time. I just received it back and the repair note said: Board replaced and software updated. So it might have been an harware issue after all!?
Nonetheless thank you all for your input.
Greetings,dave
They probably didn't want to bother repairing it on site
(JTAG is quite slow, I've heard, and they're not hobbyists who can afford the time of experimenting assuming they can get parts for free...)
Hey guys, I have a Samsung Galaxy S3 for Tmobile SGH T999 and I had cyanogen on it until it crapped out and got hard bricked. AFter following these links, http://forum.xda-developers.com/showthread.php?t=1949687 and http://forum.xda-developers.com/showthread.php?t=2439367, I was able to unbrick my phone and get into boot recovery mode. However, when i try to flash the stock firmware in odin, I get an error (the error is shown in the attachment). Can anyone please help me? Sorry if im posting something wrong, I am new to this forum. Thank you!
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
DocHoliday77 said:
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
Click to expand...
Click to collapse
I tried this still doesnt work.
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
DocHoliday77 said:
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
Click to expand...
Click to collapse
Sorry i meant failure not error. I bricked it because my cyanogenmod was having problems and i tried to restore it, after i did it completely bricked. Sorry can you please elaborate what is TWRP, MJC or NC2 firmware, im dont have much knowledge about these kind of things. Thank you so much for helping me, it means alot to me and I will do my best to follow your directions.
Ok, ill explain better when I get to my computer. It'll be too much to try to type on this tiny device im using right now!
But for now, TWRP is a custom recovery, like CWM. You use it when flashing roms like CM.
MJC and NC2 are just the different firmware builds you can flash in Odin. We shorthand it by just using the last 3 letters of the build version. T999UVUENC2 is what im referring to when I say NC2.
Take a look at my firmware thread. Its stickied at the top of development. Linked in my sig too.
Let me know if this helps your understanding at all. Ill explain more in what to do shortly.
Thanks for that, it gave me a better understanding. I tried to install flash and this happens when i try to flash twrp or MJC on odin
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
DocHoliday77 said:
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
ojhasha said:
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Click to expand...
Click to collapse
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
ojhasha said:
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
Click to expand...
Click to collapse
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
DocHoliday77 said:
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
Click to expand...
Click to collapse
It was invisibleK's link that was unsafe. I used your 16GB Pit file in here, http://www.androidfilehost.com/?w=files&flid=6471 and i got the same result. I dont remember where i got the other pit. I got stuck on Leave CS on the odin 3.09 and when i click start it failed again with the repartition failed.
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
DocHoliday77 said:
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
Click to expand...
Click to collapse
sorry i didnt respond in a while, I was really busy with homework. I tried what you said and still no sign of success. I brought my phone to a repair shop and they said the motherboard is damaged and it needs to be replaced for 150$. I hope this guy is just bull****ting me, can anyone confirm? I really hope there is still light at the end of the tunnel right now.
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
DocHoliday77 said:
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
Click to expand...
Click to collapse
do you recommend me doing it? or are there more alternatives.
If the memory itself has gone bad, that's your best option. It is possible to change just the memory chip, but the part is probably hard to find and it requires a higher level of soldering skills.
There's a video of this, if I can find it again ill post the link.
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
yellowonion said:
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
Click to expand...
Click to collapse
did you have my symptoms? did you ever fix your phone? if so please share, i want to get my phone back in the cheapest way possible.
PS. I charged my phone today and the red led light showed up, that means my motherboard isnt broken right?
Not necessarily. It means there is a problem and requires special drivers and programs to fix, (or the debrick sd card). It basically just means the computer sees something is plugged in. If the memory has gone bad it could very well still give the red led and/or boot from the sd.
The only good way to verify the board (or memory) needs replacing would be to go to a second shop and ask them to attempt a jtag repair. If they tell you the same thing as the first shop, ask if they can be more specific about what happened when they attempted the jtag repair. At this point though, its a pretty good guess that the memory has gone bad.
I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
Well no one was able to answer my question, so I had to figure it out on my own. Hopefully the following information will be of help to someone else without spending 36+ hours digging through the internet for answers.
You CAN fix your phone it you are on the NJ1 kernel. This is NOT a guide to fixing a bricked phone, although it may fix that too.
If you are on the NJ1 kernel, there are no root methods currently available. You MUST be on NE3 or lower. I also attempted to flash the custom recovery through Odin, but after a reboot it was as if I did nothing. No Knox flag, no warranty trip, no custom recovery.
Here is what I did to get custom recovery and root:
READ THIS BEFORE ATTEMPTING STEP 1.
This is only for the Sprint variant of the S4 Mini. Model number SPH-L520
Your Warranty could be voided. Proceed if you like. (More info on steps 5 and 6)
I had a horrible time getting the downloads from Sammobile. You WILL have to create an account and login to download files. I could not find any working links for the firmware below except for this site. Register a user name and password, DO NOT UNCHECK THE BOX that says receive emails from Sammobile OR YOU WILL NOT GET YOUR REGISTRATION EMAIL. On the Register page it is at the bottom. After you register, check your email and click on the link to complete the registration.
Close all your windows that are open to sammobile.
You are going to want to download Internet Download Manager in order to download files from Sammobile. After many many attempts to download the firmware from Sammobile, all tries failed. YOU ARE GOING TO NEED IDM to get a reliable download.
Download IDM ---> https://www.internetdownloadmanager.com/download.html
Install it and follow these directions to enable resume downloads in IDM ---> http://forum.xda-developers.com/showthread.php?t=2765456
If you do not do the steps above, you most likely will have failed download after failed download.
Even after setting this up, the firmware download failed on me twice. I deleted it from the download list in IDM and started it again.
IDM integrates well with Internet Explorer. Kinda buggy with Chrome. I would suggest using IE for the rest of this Tutorial.
Ok, now that you have that squared away, move on to step 1
_________________________________________________________________________________________________________________________
1) Flash your phone back to NE3. You can get that here ---> http://www.sammobile.com/firmwares/download/31482/L520VPUBNE3_L520SPTBNE3_SPR/ (click Regular Download, then on new page right-click Confirm Download and click SAVE AS. After that the IDM window should pop up. Just Start Download)
Also go ahead and download download the NJ1 in case things get rough. List of all firmwares here ---> http://www.sammobile.com/firmwares/database/SPH-L520/
2) Download and install the Samsung drivers ---> http://www.mediafire.com/download/a4hd8y0c1iakysk/Samsung-Usb-Driver-v1.5.49.0.exe
Download Odin 3.09 ---> http://androidhost.org/PVAIv
Unzip Odin to a folder or desktop. Do not run it from in the zip folder.
3) Run Odin 3.09.
Reboot your S4 Mini SPH-L520 into download mode. Turn phone off > Hold Volume Down, Home Button, and Power Button all at the same time. Wait for the phone to buzz and the pop up on the screen. Release the buttons and press Volume Up to confirm.
Now plug in your phone to your computer. It might take a few seconds for the drivers to install. Wait until Odin shows blue color in the first bar on the left side. Should say 0:[COM3] (the COM number will be different depending on your computer and the USB port you plugged it into)
VERY VERY IMPORTANT! Make sure that the AUTO-REBOOT and F. RESET TIME boxes ARE checked. Make sure that the RE-PARTITION box is NOT checked.
4) Unzip the NE3 download from earlier. Click on the AP button in Odin and navigate to where you unzipped NE3. It should be a .MD5 type of file
Give Odin a few mins to check the file. It may appear that Odin has hung up, just be patient.
After Odin has run the check, it should say ok in the little window on the bottom left. Now click START and wait.
DO NOT bump the phone, the laptop, the usb cord, and MAKE SURE THE BATTERY DOES NOT FALL OUT!!!
After Odin is done flashing, it will reboot the phone. After the initial reboot, the phone will reboot itself once more. Be patient
Now wait for the phone to completely boot up.
5) After you have got back to ME3, you can follow this guide to root it ---> http://androidxda.com/root-samsung-galaxy-s4-mini-sprint-sph-l520
You already have most of the files you need. Just follow the instructions and download what you do not have already.
By the way, in Odin the AP button and the PDA button are the same
(This method should not trip the Knox counter, but I am unsure. Mine was already tripped before all of this)
OPTIONAL (this will trip the Knox counter and lose warranty status)
6) Now you can use this guide to install the custom recovery ---> http://techbeasts.com/2014/05/04/in...-root-sprint-samsung-galaxy-s4-mini-sph-l520/
Again, you already have most of the files you need. DL what you don't have.
_________________________________________________________________________________________________________________________
I am planning on instaling CM11 ---> http://forum.xda-developers.com/showthread.php?t=2669991
This ROM apparently needs a specific recovery in order to work properly. I installed that one instead.
MAKE A BACKUP IN THE RECOVERY OF THE STOCK ROM BEFORE FLASHING ANY CUSTOM ROMS, or else be sorry later.
This is about as simplified as I could get it. Hope this helps out those of you that were as confused as I was.
I will not be providing support. Simply do not have the time. There is more than enough info here to help you figure out what to do.
fire3element said:
I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
Click to expand...
Click to collapse
Can you help me to backup your first partition on your phone and send to me. You can use EFS Professional on xda.
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
Can you backup your phone by EFS Pro and send to me. Thanks.
NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
quanqw said:
Can you backup your phone by EFS Pro and send to me. Thanks.
Click to expand...
Click to collapse
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.
worked
fire3element said:
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.
Click to expand...
Click to collapse
thanks alot
the baseband nearly killed me but i thanked my God for you. it worked for me
my question is, is there any way to get it work for domestic sim outside USA?
Good evening folks. I hope I'm posting in the correct place.
First id like to start off thanking everyone for whatever help I can get. I know I've come to the place where I can get some help.
I apologize in advance If I'm lacking any info in my post.
I REALLY NEED HELP.:crying::crying::crying:
I have a rooted metro pcs galaxy s4
I have recently started having a really slow phone. Slow is a understatement actually.
Everything freezes up and I cant do anything with it. I DO have root access.
Anything I try to do such as enter the phone settings, an app or simply try make a call just seems to take a ton of processing power and eventually glitches or freezes up and force closes themselves.
It reminds me of a computer that doesn't have enough memory in it.
I installed some app in the play store that required root access called adjbrightness and ever since then my phone has been crazy slow with apps and services crashing.
I cannot be certain this app had anythinto do with my problem though.
I cant even make a call Its soooo bad.. GGRRrrrrrrrrr......:crying::crying::crying:
I installed one click kango root about a month ago and definitely haven't had any problems until about a week or so ago.
Since then iv tried everything. I'm pretty good with android phones too. I'm always helping ppl fix slow phones or computers.
I fear I may have force stopped or disabled a critical system function or service by accident.
Iv done the following already...
-Factory reset first then uninstalled the root.
-Ever since I unrooted today, I am unsure if I can or should or even could do a factory reset now. Because if I try to do it upon reboot, a warning states that installing custom roms can be damaging to my phone. Um.... Yikes!
-I formatted and removed my SD card.
-Prior to unrooting I did do factory reset several times without results.
I'm really freaking out.
I know this was something that could happen upon rooting as a risk I was taking.
I feel this issue was somehow due to the root access ultimately and that something in the rom (or what not) is glitching badly or some code is just missing.
- I never installed custom rom or messed with the rom that I know of.
-I never messed with any kernels or clocking methods because that's all too scary for me.
-I really didn't mess with things I didn't understand.
I rooted mainly to save battery and ditch some factory bloatware. I'm sure yall can relate.
Oh and I didn't download anything from porn sites, don't worry. HAHA.
Pleeeeeeese, please PLEASE, help lead me on the right path and I will be your best friend for ever.... I just haven't a clue what the issue could be. :crying::crying::crying:
Thank you so much for any and all help in advance.
THX!!!!! K++
---------- Post added at 04:43 AM ---------- Previous post was at 04:36 AM ----------
I would suggest you download the latest metropcs firmware for your device and flash with Odin. Don't worry about the warning, it's supposed to say that. Hopefully you don't have any important info or media that you haven't backed up. If so, back it up before you flash. After the flash, boot straight into recovery and do a factory reset. After that you will start off fresh and your phone should be back to normal
Sent from my SM-G920T using Tapatalk
please help
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
besthomeguy said:
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
Click to expand...
Click to collapse
Try 3.09, AP=PDA.
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
I see now that im suppose to extract the tar file from the 7zip/zip archive, yet I see no file with that name or extension to do so. Sorry...
besthomeguy said:
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
Click to expand...
Click to collapse
Just saw this right now and if you still need help I might be able to help. I'm also on MetroPCS. That firmware you downloaded is a t-mobile one and I'm not sure what version it is but download the stock one from this thread http://forum.xda-developers.com/gal...tock-base-metropcs-4-4-4-fni3-galaxy-t2899701 then flash it in Odin . After flashing it set it up and all that stuff and do the software update. It'll update your modem to NK3 which is the latest. I'd say use it for about a week and see if it's good or you can just root it right away if you want. I used CF auto root for M919 to root my M919N (MetroPCS version of the S4). For recovery I use TWRP jfltmo. After that just make a backup and keep it on your computer or SD card just incase something happens again so you can flash the backup. If you want to flash a ROM I recommend Hispasian ROM (currently using) or Insane Hybrid. Both are really stable and fast ROMS.
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....