[Q] Odin won't show FCO6 MD5 but I have it?? - Epic 4G Q&A, Help & Troubleshooting

Hey guys im having a bit of an issue when trying to flash the official FCO6 Stock rom through odin. I have v1.85 and 1.87 and both show the same thing. I have the victory pit file and the SPH-D700-FC09-8GB-REL.TAR.MD5 file both on my desktop but when my phone is plugged in and ready to go, and I click PDA on odin and go to desktop, it isn't their. The victory file shows up and I place that In it's correct place but the md5 does not. No matter where I put it? anyone have any suggestions so I can odin my phone?

try erasing the .md5 part at the end

Try the phone slot instead.
Sent from my GT-P7510 using Tapatalk 2

Hey guys I have this exact same problem right now. My phone is in a bootloop so I am trying to odin back to stock but the FC09 file will not show up. I have tried removing the .md5 as well but that does not work either. I have tried deleting and re-downloading 3 times. I know the file is there 100% and I know I am looking in the right folder 100%.
edit: this is odin 1.87 and I have tried the phone slot with the same results.
edit #2: I am sure someone else will run into this problem someday since two of us have. Apparently this is the only file you will ever unzip. I have it so ground into my head to never unzip anything I didn't think of that

danipoak said:
Hey guys I have this exact same problem right now. My phone is in a bootloop so I am trying to odin back to stock but the FC09 file will not show up. I have tried removing the .md5 as well but that does not work either. I have tried deleting and re-downloading 3 times. I know the file is there 100% and I know I am looking in the right folder 100%.
edit: this is odin 1.87 and I have tried the phone slot with the same results.
edit #2: I am sure someone else will run into this problem someday since two of us have. Apparently this is the only file you will ever unzip. I have it so ground into my head to never unzip anything I didn't think of that
Click to expand...
Click to collapse
Try the updated version of Odin. http://db.tt/OIEtTUxn

Related

ICS official release, what can I do with this .tar file?

Hi all,
So I got the txt message from AT&T about upgrade available.
So I opened Keis and let it update. (I have a whole seperate issue with Kies; it will only read my Glide about 10% of the time).
Once I FINALLY got it to connect to my phone, I began the update process. FAIL
fail, fail, fail, 4 hours of fail.
i've tried every recommendation from every post i';ve come across, including uninstalling keis, running reg cleaner, rebooting, reinstalling.
i've trie 3 diff version of the samsung usb driver program, whatever u search for on this forum and google, i've tried it.
The best I have gotten is for Kies to actually recognize my phone and begin the update process, a few times, I saw no progress bar on the phone and the Kies window stayed on 0%.
The first time I actually sw a progress bar on my phone, it moved about 1/8th of an inch and stopped. I left if overnight, and when I got up this morning, it was the same.
So again today, on a different computer, I created a new user profile and tried some more; nada.
So I'm so desperate for ICS on this phone, I tried using that one click release of the leaked ICS, same thing. several times of not recognizing the phone, then finally
the progress bar on the phone moved a little bit, so I left it for over an hour and it didn't move.
At least this time, I could see that it was hung on the bootloader part.
I've tried this on two diff Win7 x64 machines and an XP pro machine; all the same results.
interesting part:
Once last night, I kept my temp folder open while Kies was doing it's thing, and I grabbed this file:
https://docs.google.com/open?id=0B_Sgf7j8WktibEJ4NXVva08zYmM
(i couldn't find any free file share sites that would let me upload a file this big.)
This is the actual ROM (or whatever you would call it)
Kies downloaded a file and named it whatever.tmp, as soon as I saw it, I copied it and extracted the contents with uniextract - that is where I got this .tar file from.
So what can I do with this file to install ICS on my phone?
I did try renaming it update.zip and copying it to my sdcard, I tried to "install update from sdcard", but I get an error about it not being signed.
For anyone who doesn't want to download a 600+MB file, this is what's inside it:
boot.img
cache.img
factoryfs.img
hidden.img
modem.bin
recovery.img
Not too sure if this belongs in development. It's a question, but the file is development purposes . Anyway you can use boot.img and a system dump of the official ICS to make a flashable zip, or theme some system apps, etc. The possibilites are endless
ericpeacock79 said:
Hi all,
So I got the txt message from AT&T about upgrade available.
So I opened Keis and let it update. (I have a whole seperate issue with Kies; it will only read my Glide about 10% of the time).
Once I FINALLY got it to connect to my phone, I began the update process. FAIL
fail, fail, fail, 4 hours of fail.
i've tried every recommendation from every post i';ve come across, including uninstalling keis, running reg cleaner, rebooting, reinstalling.
i've trie 3 diff version of the samsung usb driver program, whatever u search for on this forum and google, i've tried it.
The best I have gotten is for Kies to actually recognize my phone and begin the update process, a few times, I saw no progress bar on the phone and the Kies window stayed on 0%.
The first time I actually sw a progress bar on my phone, it moved about 1/8th of an inch and stopped. I left if overnight, and when I got up this morning, it was the same.
So again today, on a different computer, I created a new user profile and tried some more; nada.
So I'm so desperate for ICS on this phone, I tried using that one click release of the leaked ICS, same thing. several times of not recognizing the phone, then finally
the progress bar on the phone moved a little bit, so I left it for over an hour and it didn't move.
At least this time, I could see that it was hung on the bootloader part.
I've tried this on two diff Win7 x64 machines and an XP pro machine; all the same results.
interesting part:
Once last night, I kept my temp folder open while Kies was doing it's thing, and I grabbed this file:
https://docs.google.com/open?id=0B_Sgf7j8WktibEJ4NXVva08zYmM
(i couldn't find any free file share sites that would let me upload a file this big.)
This is the actual ROM (or whatever you would call it)
Kies downloaded a file and named it whatever.tmp, as soon as I saw it, I copied it and extracted the contents with uniextract - that is where I got this .tar file from.
So what can I do with this file to install ICS on my phone?
I did try renaming it update.zip and copying it to my sdcard, I tried to "install update from sdcard", but I get an error about it not being signed.
For anyone who doesn't want to download a 600+MB file, this is what's inside it:
boot.img
cache.img
factoryfs.img
hidden.img
modem.bin
recovery.img
Click to expand...
Click to collapse
You should be able to flash that with ODIN
Fact, this is the same file I downloaded from http://www.hotfile.com/dl/170800037/7fd1f5e/I927UCLH2_I927ATTLH2_ATT.zip.html
Worked flashing with ODIN on a unlocked Rogers I927R
enewman17 said:
You should be able to flash that with ODIN
Fact, this is the same file I downloaded from http://www.hotfile.com/dl/170800037/7fd1f5e/I927UCLH2_I927ATTLH2_ATT.zip.html
Worked flashing with ODIN on a unlocked Rogers I927R
Click to expand...
Click to collapse
groovy!!
so... what do i do in odin?
i've got it downloaded, but which option, etc do i need to select?
ericpeacock79 said:
groovy!!
so... what do i do in odin?
i've got it downloaded, but which option, etc do i need to select?
Click to expand...
Click to collapse
Power Phone into DOWNLOAD MODE, Pressing POWER and VOLUME UP till it boots
Using ODIN 1.85
wait for phone to appear
Uncheck F. Reset Time (only AUTO REBOOT should be checked)
Check the box next to PDA
using the PDA button select the .tar file
Press start, sit back and drink a beer
Then apply CWM I prefer 5.0.27 "EXACTLY THE SAME WAY AS YOU INSTALLED THE ROM WITH ODIN" http://forum.xda-developers.com/showthread.php?t=1458153 (it's not touch, but it keeps backups in img form rather than the .blob like CWM6. just make's it easier to handle backups.
In CWM "If you want root", apply http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
In CWM apply the LH2 Keyboard backlight fix http://forum.xda-developers.com/showthread.php?t=1848433
Its running pretty smooth so far, no major issues to report: but I had the camera giving me issues till I cleared data form the app. still gave a few stutters then the whole phone started running well after a few reboots and some settling time.
enewman17 said:
Power Phone into DOWNLOAD MODE, Pressing POWER and VOLUME UP till it boots
Using ODIN 1.85
wait for phone to appear
Uncheck F. Reset Time (only AUTO REBOOT should be checked)
Check the box next to PDA
using the PDA button select the .tar file
Press start, sit back and drink a beer
Then apply CWM I prefer 5.0.27 "EXACTLY THE SAME WAY AS YOU INSTALLED THE ROM WITH ODIN" http://dl.dropbox.com/u/9459955/recovery/testing/SGHI927R/v2/CWMR5x_i927_recovery.tar.md5 (it's not touch, but it keeps backups in img form rather than the .blob like CWM6. just make's it easier to handle backups.
In CWM "If you want root", apply http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
In CWM apply the LH2 Keyboard backlight fix http://forum.xda-developers.com/showthread.php?t=1848433
Its running pretty smooth so far, no major issues to report: but I had the camera giving me issues till I cleared data form the app. still gave a few stutters then the whole phone started running well after a few reboots and some settling time.
Click to expand...
Click to collapse
Thanks for you replies. I appreciate it very much.
(here's something weird, when viewing post in thread, it stops after the word beer. I didn't see the other stuff until I clicked reply :-/ )
unfortunately, it's doing the same thing as before... ODIN is stuck on boot.img for about ten minutes now
any thoughts.... anyone?
I want ICS on this phone SO bad.
( would it be related to the fact that I substituted beer for southern comfort? )
A few posts up I posted a link to a download of the new update that is what I used It worked perfectly. Extract from the zip and you'll have a .tar.md5 file which just makes ODIN Check the md5 sum before flashing
Sent from my SGH-I927 ICS using xda premium
ericpeacock79 said:
Thanks for you replies. I appreciate it very much.
(here's something weird, when viewing post in thread, it stops after the word beer. I didn't see the other stuff until I clicked reply :-/ )
unfortunately, it's doing the same thing as before... ODIN is stuck on boot.img for about ten minutes now
any thoughts.... anyone?
I want ICS on this phone SO bad.
( would it be related to the fact that I substituted beer for southern comfort? )
Click to expand...
Click to collapse
I checked your files md5 sum to the .tar file I used, and they are the same cbd0c11c1aa578f6bcdb06099b5d3102 so you should be good to go flashing the .tar file you captured during the keis install. Maybe try flashing CWM first boot into it and format everything then try installing the rom via ODIN. Try a new cable and/or make sure the phone is plugged into a usb plug in the rear of the computer.
enewman17 said:
A few posts up I posted a link to a download of the new update that is what I used It worked perfectly. Extract from the zip and you'll have a .tar.md5 file which just makes ODIN Check the md5 sum before flashing
Sent from my SGH-I927 ICS using xda premium
Click to expand...
Click to collapse
same thing with that one... stuck on boot.img in Odin, progress bar on phone moved about 1/8th of an inch.
i left it overnight again, i just now got up and see it's not moved....
that makes me a sad panda....
i guess next, i'll try to do this on ubuntu, using heimdall....
arrrgh.
ericpeacock79 said:
same thing with that one... stuck on boot.img in Odin, progress bar on phone moved about 1/8th of an inch.
i left it overnight again, i just now got up and see it's not moved....
that makes me a sad panda....
i guess next, i'll try to do this on ubuntu, using heimdall....
arrrgh.
Click to expand...
Click to collapse
That is a real bummer, I'm sorry it didn't work for you. It should only take a few minutes, I don't have any other ideas other than maybe try flashing the UCLG9 leak then re-trying to flash your tar file. The leak contains a new bootloader, I had flashed that a few weeks prior to the new update.
Also did you try flashing CWM with Odin just to see if it would flash seems like it's probably a computer problem rather then your phone.
Sent from my SGH-I927 using xda premium
Hello,
Sorry to 'thread-jack' but hopefully a minor annoyance.
Can someone post just the 'modem.bin' file from the I927UCLH2 update?
FYI, in hopes of enabling 3G/HSPA voice calling on Galaxy Tab 10.1..
Using European Tegra 2 based phone modem (from I9103), 2G voice calling works.
Trying to avoid downloading the entire .tar for one file =p
To clarify - European Tab 10.1 users are fine; AT&T and Rogers Tab 10.1 users can currently use 2G only.
T-Mobile - apparently 'their' phone counterpart uses a combo of 2 modem-related files?
But I digress... (don't think I can embed links yet) thread is in Tab 10.1 Dev forum.
Thank you!
enewman17 said:
That is a real bummer, I'm sorry it didn't work for you. It should only take a few minutes, I don't have any other ideas other than maybe try flashing the UCLG9 leak then re-trying to flash your tar file. The leak contains a new bootloader, I had flashed that a few weeks prior to the new update.
Also did you try flashing CWM with Odin just to see if it would flash seems like it's probably a computer problem rather then your phone.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
i did try flashing the CWM and it did the same thing stalling after about one second into it, same with UCLG9 leak one-click executable. (at least using that told me it was stuck on trying to flash the boot image)
I'm about to build a fresh win7 x86 VM with nothing but .net and VC++ runtime installed, to rule out both my living room and home office comps as the problem.
if it still don't work, the i'll build a fresh ubuntu VM and try it with heindall
Thank you, enewman17, for all your help. it is really appreciated. :good:
if it still don't work, i will call Samsung and demand a replacement phone.
spamam1:
modem.bin - 12,289KB
I used rom from 1st post and it's working flawless but is there any way to "super-duper" wipe this phone? after update I still have all my data, programs and even unlocked simlock. I will probably send it on warranty so I would like to have stock rom
edit: i think ICS is much slower than GB
timon12 said:
I used rom from 1st post and it's working flawless but is there any way to "super-duper" wipe this phone? after update I still have all my data, programs and even unlocked simlock. I will probably send it on warranty so I would like to have stock rom
edit: i think ICS is much slower than GB
Click to expand...
Click to collapse
Settings --> Back up and reset ---> Factory data Reset.....As it states this erases all data on the phone.
I'm getting it to boot up after cwmr but it hangs on the installing applications screen. Left it for an hour and still the same
are you kidding me?!?!
ARE YOU FREAKING KIDDING ME?!?!?!?!
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
ericpeacock79 said:
are you kidding me?!?!
ARE YOU FREAKING KIDDING ME?!?!?!?!
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
Click to expand...
Click to collapse
It's always something.... Haha
Glad it's working now.
Sent from my SGH-I927 using xda premium
ericpeacock79 said:
ok, so here's what finally worked:
using a different USB cable that i found laying around.
Click to expand...
Click to collapse
Same flash problem here, same exact solution. Flimsy micro-USB cable was the culprit. ODIN would get partially through and almost always fail during SetupConnection or Initialzation or NAND Write Start. Wasted about 12 hours testing a dozen possible causes. Changed to the thicker OEM cord and BAM!
Thanks!!
Funnny what a cable could do lol

[Q] galaxy note 8 factory restore

Hi guys. Im a noob, first post here and need some help. Be searching all day for how to load a stock rom to my device GT-N5110.
Heres the low down.
Purchased in Australia. No updates applied.
Success rooted with framaroot.Was running framaroot for more than a month
Install busy box today in normal mode I think. I chose the safe option.
Edited build.prop product model so I could install Navigon
Navigon working fine
Now..........
Unable to change the product name back using es explorer or file expert.
Thought it would change after restart but device entered bootloop. I think busybox was the culprit.
Discovered recovery mode and did factory data reset. Can acces odin screen on device too.
Device boots but hangs on language selection screen
I have found and downloaded stock rom for it that I found here somehow
I tried "Mrjraider" tutorial "how to flash back to a stock rom"
but odin crashes whenever I load the rom file and it wont recognize my GN8.0
Computer runs on windows 8. Kies is up to date too. Kies reconizes device but is unable to update or anything
Was running odin in win xp sp3 with administrator
can try on a win7 computer tomorrow.
This is the name of the file its about 1.2 Gb....... N5110UEDMD1_N5110XARDMD1_HOME.tar.md5 do I need to rename this or something
There was also a .dll that was in the package, wtf with that?????
be looking through this forum all day and night and cant quite find what im looking for. If what I seek is here please point me to it. Or if any one here in Brisbane, can fix it for me,What are your thoghts? PM me.
Just want my baby back working again.
Sorry, wrong section please delete mod
If I'm not mistaken, remove Kies, then try using Odin. Also, dll is a Windows file. I could be wrong about Kies, but I think I remember reading that it conflicts with Odin.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2
Yesterday I installed same firmware in my computer runing win7 with Odin and Kies installed at the same time without problems. You don't need to rename the file, dll is a library for windows and needs to be on the same folder as the md5 file. Just remember to put the Note in download mode in order to get the firmware installed by Odin.
I have a thread in the development forum with the only file you need just flash in odin and done.
Sent from my GT-N5110 using Tapatalk 2
Tutorial is ok, problem seems to be elsewhere.
I have Windows 8 (x64) too, and Odin works i my case, i successfully flashed (and restored counter) N5110 before returning tablet to shop (it was exchange for N5100). Kill all Kies components via task manager, i have two more things in processes when i quit Kies. Next, try another version of Odin, but I remember one ROM from SamMobile, which crashed every Odin i had, so its may be this problem. Try another version of ROM - older, if exists. If crashes Odin too or not exists, try uninstall both Kies and Samsung USB driver, dowload toolkit from xda (http://forum.xda-developers.com/showthread.php?t=2251033) and install new driver via toolkit.
In rare cases may be problem in your computer, so try another one without installing Kies. I wish you luck.
Edit - That big file is ROM, dll is not needed for Odin. Run Odin, press PDA, select your rom. Turn tablet off, connect to comupter by original or hi-quality short cable, set tablet into download mode (hold vol- and home, press power on for 2 secs, select continue by pressing vol+). If all is ok, first field in Odin change color to yellow (i think), then press "Start".
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
This is the kind of story that are the most scary. Now I am kind afraid of root my note 8 or do anything unofficial.
Anyway, best wishes to you.
mickatron said:
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
Click to expand...
Click to collapse
That's what I use odin 3.07 . Don't use the other versions for some reason they don't work
Secondly guys when you download that file in my thread tO your computer it has to be extracted first you only Click PDA In ODIN and use the file you just extracted with the tar md5 extension. Thats it. That ss.dll file has no purpose its just there and you need not even bother with it.
Sent from my GT-N5110 using Tapatalk 2
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
ROM
lanwarrior said:
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
Click to expand...
Click to collapse
Will these two links help you:
Link 1
Link 2
AkiOrpheus said:
Will these two links help you:
Link 1
Link 2
Click to expand...
Click to collapse
I have checked that, but I don't see US Note 8.0. The search seems broken to, since United States is not shown in the list of country for Note 8.0
No one knows how to get the stock US based ROM?
lanwarrior said:
No one knows how to get the stock US based ROM?
Click to expand...
Click to collapse
@lanwarrior
U have to register on sammobile.com to download firmwares (stock ROM). Put the model as SGH-i467 and u will the file
AkiOrpheus said:
Will these two links help you:
Click to expand...
Click to collapse
people keep posting to go to sammobile but every time i look there isn't a rom labeled for the US, and they dont give an explanation of what rom would be the equivilant or even if any of them would be. Should I use UK version? is it the same as the US?
I'm having the same exact issue as OP and I can get into download mode and i have odin 3.07 but i am just looking for the exact rom to load and cant find an exact answer so far. I've already messed up my tablet enough today so I don't want to flash the wrong rom and make things worse lol.
K
O
F
ps I looked for janjansen's thread in development and did not see it, am I missing something? anyone got a link?
ok I did some more reading around the web and found that a lot of people used the UK version as I kinda suspected. Would have been nice to get confirmation on that but its cool, I flashed it, no problem, and now I'm setting up the chainfire root and getting back all my apps. So all in all it took a few days but I'm back on my feet *sigh of relief*
K
O
F

[Q] Boot Loop/Stock firmware/I seriously need help PLEASE!!!!

Hello all *waves*
This is my very first post although I have used this site countless times. I'm just going to jump right to it because I seriously need some help!
I am trying to fix my SGH-M919 (Tmobile S4) that just suddenly stopped working one day. I have tried EVERYTHING! Kies, custom roms, Odin but my phone still will not load past the Samsung logo. It will boot into recovery (TWRP) and Download mode. I know that using Kies is the quick fix but (LUCKY ME...not) my phone is one of the few phones tmobile/Samsung sent out with no S/N on the sticker under the battery. Since I cant get into my phone I cant get the S/N and I do not have the box anymore.
I have tried using the many sgh-m919 Stock Rom files online, including this site, but nothing is working. When I spend hours downloading them and begin to use them in odin, Odin doesn't load the file for me to flash.
I know I am using Odin correctly because I have done it successfully countless times in the past. I have also tried EVERY download file out there, but I can't find a good one that I can flash in Odin. I have also tried all of the guides on this site several times so please don't redirect me to them, because I have seriously and correctly tried them all. If you have any suggestion please let me know. I can't afford the 161.00 Samsung is requiring or the 175 warranty fee tmobile is charging. PLEASE HELP.
And if some has a good copy of the Stock Rom for SGH-M919 that they would be willing to email me I would FOREVER be greatful!
also my sdcard and battery are not the issue.... tried that too
Thanks,
Nikki
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
serio22 said:
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
Click to expand...
Click to collapse
I don't know if its something I have done wrong or not. I followed all of the instructions to the letter. I think (but am not sure) that I don't have a usable copy of the Stock Firmware.
I am using v3.10 but I have tried them all.
When I click on AP in Odin, then click on the file I am sent back to Odin, but the file (and filename) doesn't appear in the AP box like normal.
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Frankenscript said:
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
The longest I have waited has been an hour, do you think that I should still wait longer?
Try different version of odin. Even if the file was bad, it would say something
Try a different pc.
Pp.

Please help. Freezing crashing galaxy s4 rooted.

Good evening folks. I hope I'm posting in the correct place.
First id like to start off thanking everyone for whatever help I can get. I know I've come to the place where I can get some help.
I apologize in advance If I'm lacking any info in my post.
I REALLY NEED HELP.:crying::crying::crying:
I have a rooted metro pcs galaxy s4
I have recently started having a really slow phone. Slow is a understatement actually.
Everything freezes up and I cant do anything with it. I DO have root access.
Anything I try to do such as enter the phone settings, an app or simply try make a call just seems to take a ton of processing power and eventually glitches or freezes up and force closes themselves.
It reminds me of a computer that doesn't have enough memory in it.
I installed some app in the play store that required root access called adjbrightness and ever since then my phone has been crazy slow with apps and services crashing.
I cannot be certain this app had anythinto do with my problem though.
I cant even make a call Its soooo bad.. GGRRrrrrrrrrr......:crying::crying::crying:
I installed one click kango root about a month ago and definitely haven't had any problems until about a week or so ago.
Since then iv tried everything. I'm pretty good with android phones too. I'm always helping ppl fix slow phones or computers.
I fear I may have force stopped or disabled a critical system function or service by accident.
Iv done the following already...
-Factory reset first then uninstalled the root.
-Ever since I unrooted today, I am unsure if I can or should or even could do a factory reset now. Because if I try to do it upon reboot, a warning states that installing custom roms can be damaging to my phone. Um.... Yikes!
-I formatted and removed my SD card.
-Prior to unrooting I did do factory reset several times without results.
I'm really freaking out.
I know this was something that could happen upon rooting as a risk I was taking.
I feel this issue was somehow due to the root access ultimately and that something in the rom (or what not) is glitching badly or some code is just missing.
- I never installed custom rom or messed with the rom that I know of.
-I never messed with any kernels or clocking methods because that's all too scary for me.
-I really didn't mess with things I didn't understand.
I rooted mainly to save battery and ditch some factory bloatware. I'm sure yall can relate.
Oh and I didn't download anything from porn sites, don't worry. HAHA.
Pleeeeeeese, please PLEASE, help lead me on the right path and I will be your best friend for ever.... I just haven't a clue what the issue could be. :crying::crying::crying:
Thank you so much for any and all help in advance.
THX!!!!! K++
---------- Post added at 04:43 AM ---------- Previous post was at 04:36 AM ----------
I would suggest you download the latest metropcs firmware for your device and flash with Odin. Don't worry about the warning, it's supposed to say that. Hopefully you don't have any important info or media that you haven't backed up. If so, back it up before you flash. After the flash, boot straight into recovery and do a factory reset. After that you will start off fresh and your phone should be back to normal
Sent from my SM-G920T using Tapatalk
please help
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
besthomeguy said:
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
Click to expand...
Click to collapse
Try 3.09, AP=PDA.
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
I see now that im suppose to extract the tar file from the 7zip/zip archive, yet I see no file with that name or extension to do so. Sorry...
besthomeguy said:
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
Click to expand...
Click to collapse
Just saw this right now and if you still need help I might be able to help. I'm also on MetroPCS. That firmware you downloaded is a t-mobile one and I'm not sure what version it is but download the stock one from this thread http://forum.xda-developers.com/gal...tock-base-metropcs-4-4-4-fni3-galaxy-t2899701 then flash it in Odin . After flashing it set it up and all that stuff and do the software update. It'll update your modem to NK3 which is the latest. I'd say use it for about a week and see if it's good or you can just root it right away if you want. I used CF auto root for M919 to root my M919N (MetroPCS version of the S4). For recovery I use TWRP jfltmo. After that just make a backup and keep it on your computer or SD card just incase something happens again so you can flash the backup. If you want to flash a ROM I recommend Hispasian ROM (currently using) or Insane Hybrid. Both are really stable and fast ROMS.
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....

Help getting my Note 8 flashed properly

Sorry if I'm posting in the wrong forum here, but I wasn't sure where to start.
I got an ATT Note 8 unlocked running Nougat that would not come up on the Verizon network using my working SIM card. I had read that there were known issues with this and that an upgrade to oreo would fix things. Googling around I found an upgrade zip file from N950USQS2BQK2 to N950USQU2CQL1. I used the recovery method to upgrade from that file and at first things seems to be fine. I started having lots of issues with apps dying, eg Contacts, Phone and Bixby and started to wonder if perhaps the OS could be further upgraded. I hunted around and installed the samfirm tool and downloaded the file
SM-N950U_1_20181126150901_ouxwmh265r_fac.zip and extracted out all the parts. Using Odin (13.1) I tried to install this file but it got hung installing
system.img.ext4. Realizing that it would likely cause problems I powered off the phone after a couple of hours with no progress. As expected the phone was pretty pissed off when I tried to boot it up. It was stuck in trying to upload a crash file and took a lot of fiddling around to convince it to go back to download mode, thanks to one of the posts from this site I was able to make it work.
I've tried the same file again and it is stuck again at the same place. So the question is should I be using a different file? If at all possible I'd just like to run the standard Verizon load, in hunting around it seems for the latest Oreo I should use N950USQS5CRK1. but I can't figure out where to get that file in the format that Odin uses I've looked on the firmware.science website but have only come up with the zip version that would work with the recovery mode. Unfortunately with the state my phone is currently in I don't think I can get to recovery mode. It is in the endless upload mode, hitting the down & power button will shut it down but it comes right back to the upload screen. Any advice would be greatly appreciated. Sorry for the rambling post.
rphaddad said:
Sorry if I'm posting in the wrong forum here, but I wasn't sure where to start.
I got an ATT Note 8 unlocked running Nougat that would not come up on the Verizon network using my working SIM card. I had read that there were known issues with this and that an upgrade to oreo would fix things. Googling around I found an upgrade zip file from N950USQS2BQK2 to N950USQU2CQL1. I used the recovery method to upgrade from that file and at first things seems to be fine. I started having lots of issues with apps dying, eg Contacts, Phone and Bixby and started to wonder if perhaps the OS could be further upgraded. I hunted around and installed the samfirm tool and downloaded the file
SM-N950U_1_20181126150901_ouxwmh265r_fac.zip and extracted out all the parts. Using Odin (13.1) I tried to install this file but it got hung installing
system.img.ext4. Realizing that it would likely cause problems I powered off the phone after a couple of hours with no progress. As expected the phone was pretty pissed off when I tried to boot it up. It was stuck in trying to upload a crash file and took a lot of fiddling around to convince it to go back to download mode, thanks to one of the posts from this site I was able to make it work.
I've tried the same file again and it is stuck again at the same place. So the question is should I be using a different file? If at all possible I'd just like to run the standard Verizon load, in hunting around it seems for the latest Oreo I should use N950USQS5CRK1. but I can't figure out where to get that file in the format that Odin uses I've looked on the firmware.science website but have only come up with the zip version that would work with the recovery mode. Unfortunately with the state my phone is currently in I don't think I can get to recovery mode. It is in the endless upload mode, hitting the down & power button will shut it down but it comes right back to the upload screen. Any advice would be greatly appreciated. Sorry for the rambling post.
Click to expand...
Click to collapse
Download this odin firmware and FIRST extract it one time and the files for odin will be in the extracted folder and flash. You must flash AP, BL, CP and CSC all at the same time. Fill all the slots in odin.
https://androidfilehost.com/?fid=11410963190603879881
MrMike2182 said:
Download this odin firmware and FIRST extract it one time and the files for odin will be in the extracted folder and flash. You must flash AP, BL, CP and CSC all at the same time. Fill all the slots in odin.
Thanks for this. One question, I had the same issue the last time, there is a CSC and a HOME-CSC file included in the zip archive, which of these should be used with Odin?
thanks again
Click to expand...
Click to collapse
rphaddad said:
MrMike2182 said:
Download this odin firmware and FIRST extract it one time and the files for odin will be in the extracted folder and flash. You must flash AP, BL, CP and CSC all at the same time. Fill all the slots in odin.
Thanks for this. One question, I had the same issue the last time, there is a CSC and a HOME-CSC file included in the zip archive, which of these should be used with Odin?
thanks again
Click to expand...
Click to collapse
Never mind found that in another post.
thx
Click to expand...
Click to collapse
if I wanna odin without losing data I use home instead of CSC correct?
I would suggest also using Samsung Smart Switch before doing it. It gives you the option to back up pretty much your whole phone including just about all your apps, settings and customizations to an SD card. It also saves your custom icon groups too if you do that. The it makes it a breeze to restore after doing an Odin flash. It has helped save me a time or 2.
Eta: After rereading the OP, looks like you may not be able to use this as you need to be able to boot all the way up.
Right, I was not able to boot so smart connect isn't an option, but luckily it's a new phone so no data to transfer. I did run into an issue using Odin with USB C on my laptop to the phone, I think that is how I got into that predicament in the first place with Odin downloads failing to complete. Works fine with USB 2.
Phone is all set now and working fine. Thanks for your help.

Categories

Resources