Develop Bugs

Seidio CONVERT Combo

Amazon.com Price= $38.20
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This looks pretty similar to something that I believe Otterbox will end up looking like. Personally, I think the flap over the camera is laughable but if you want true protection it comes with a price.
Picked one of these up. LOL! Why? I work in a very dirty environment that would subject my phone to a lot of fine particulates and water. Plus a 2-year old that loves to play with phones.
It is next to impossible for me to get the kickstand out with this case. I need long fingernails to reach the stand with this one.
Anyone else have one of these?

I have this case and i think it's great that you can add the extra protection when it's needed, and then just remove it when you don't.

Can the flap for the camera be permanently removed?
Sent from my ADR6400L using Tapatalk

I just got mine in the mail about 2 days ago. i have no flap. i did also buy this from amazon. Maybe mine is older or new i don't no. i would post the link from where i bought it but im still a newb.
all in all i love the case and the belt clip. great product

D3TH METAL said:
Can the flap for the camera be permanently removed?
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
You could have to rip the rubber off the pivot piece for the camera cover. Then you could make it removable. It's the only option I know of.

D3TH METAL said:
Can the flap for the camera be permanently removed?
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
that hole next to the camera, yea the bump on the flap is placed there to hold it back.

i had this case since i bought my TB but i got it from Best Buy n it was called Platinum. its a really good case. i would really recommend this

same I got the platinum series TB case from best buy. 34.99
its sleaker then the one posted though and looks better IMO.
The holes in the back for the cam and LED are 2 different accurate cut outs instead of one. looks better but it dies not have the flap/cover

Its the same case. The convert just has two extra layers and isn't rebranded.

REVIEW: Elago G5 Flex Case for Galaxy S3

I wanted a dark-blue navy colored case that was full-fitting. As in, no loss of protection to any corner/edge of the phone.
This case was the closest I could find to what I wanted, so at $15 shipped in the USA, I went ahead and picked it up.
I'm not crazy about this case. But it's not bad either. Pretty good for $15 shipped I guess.
Here are some plus's & minuses.
1) It's kind of slick feeling. Like it could easily slip through my fingers. Not the worst ever, but definitely one of the slippery feeling cases I've used.
2) It always feels "dusty" even when it's clean?
3) #2 is probably because it has a "silky soft" feel to it. I'm probably just not used to the way that feels. It does not feel like any TPU case I've ever used before. It does not feel overly rubbery but instead, almost "cloth-like".
4) It's a perfect fitting case. VERY easy to put on and remove. So easy in fact, that you think the phone might fall out. But once the case is on, it feels like it fits perfectly. The case does not wiggle around like some cases I've had before.
5) The cutouts are all very good.
6) The USB cutout is large enough to allow all of my microUSB connectors to flush fit the phone when connected.
7) The blue color has a barely perceptible PURPLE tinge to it. Even though it's mostly blue. Kinda like the phone itself.
8) It has not gotten any scratches in the few days I've used it so far.
9) There is a huge blemish above the volume rocker. I've circled it in the pic below.
VOLUME BUTTON WITH BLEMISH ABOVE IT. Blemish is circled in red.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
POWER BUTTON.

Why is there a big hole by the upper right corner?
Sent from my Blue 32 Verizon SGSIII using Tapatalk 2

liteon163 said:
Why is there a big hole by the upper right corner?
Sent from my Blue 32 Verizon SGSIII using Tapatalk 2
Click to expand...
Click to collapse
It's for the version with a tv aerial. This is what always stopped me buying one of these, can never know until it arrives if a version without the hole exists.
Sent from my GT-I9300 using Tapatalk 2

alias_neo said:
It's for the version with a tv aerial. This is what always stopped me buying one of these, can never know until it arrives if a version without the hole exists.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Are these only found on the International variants?

Jubmasterflex said:
Are these only found on the International variants?
Click to expand...
Click to collapse
Probably for the Korean market. They have DMB which requires an antennae to watch TV.

If this is designed for the korean market S3... its gotta be slightly loose, as the S3 with the TV antenna is slightly thicker

D.I.Y Grippy Rubber Shell Cover

I've been a huge fan of this product for years ---> http://www.plastidip.com/
It's basically a spray on rubberized coating that is also 100% REMOVABLE!
I have been using it on trim pieces and rims on my car for years.
Out of sheer boredom, I decided I would try the product on my Moto G battery cover.
Turned out great!!
On my last coat, I got near the bottom of the can (was using left overs), so a couple of bubbles appeared.
But this was just a proof of concept, spur of the moment situation.
Next time I am going to use a fresh can, and maybe a different colour.
Anyway, here are my results!
Tell me what you think!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some pics of me removing the coating. Peels off easily. Leaves no marks.

Looks nice! But maybe a bit too ruggy, not for the bubbles, on the rest too. But I guess that happens with any spray painting Unluckily. Anyway, looks nice to me :thumbup:
Sent from my XT1032 using xda app-developers app

mr_nooby said:
Looks nice! But maybe a bit too ruggy, not for the bubbles, on the rest too. But I guess that happens with any spray painting Unluckily. Anyway, looks nice to me :thumbup:
Sent from my XT1032 using xda app-developers app
Click to expand...
Click to collapse
Thanks. The thing is that it's not paint. It's fully removable and leaves no trace. This was just a rush job with some almost empty left over cans. Just wanted to see how well it would sick. Going for a different color and better quality next time
Sent from my XT1032 using Tapatalk

Op updated with removal pics
Sent from my XT1032 using Tapatalk

One phone ago I sprayed my Nexus S's battery cover with clear Plasti-Dip and it did not hold well at the edges, and would start peeling away rather quickly.
Please keep us posted, and if it does work, maybe some tips on application or something?

ATRIXXIRTA said:
I've been a huge fan of this product for years ---> http://www.plastidip.com/
It's basically a spray on rubberized coating that is also 100% REMOVABLE!
I have been using it on trim pieces and rims on my car for years.
Out of sheer boredom, I decided I would try the product on my Moto G battery cover.
Turned out great!!
On my last coat, I got near the bottom of the can (was using left overs), so a couple of bubbles appeared.
But this was just a proof of concept, spur of the moment situation.
Next time I am going to use a fresh can, and maybe a different colour.
Anyway, here are my results!
Tell me what you think!
Here are some pics of me removing the coating. Peels off easily. Leaves no marks.
Click to expand...
Click to collapse
I am waiting for the nect color..
Anyway thanks.

Dot View Case Help

Verizon store gave me the dot view case and really want to use it daily especially if mods are coming out but how the u use this thing? I can't figure out a one handed way to use it say for quick text message or what not.
Is it normal for phone lid to not sit flush? Seems cheaply made as I don't see how this is on purpose?
Any tips on how to use this thing one handed and how to get the lid to stay closed flush? First ever wallet style case to not sit flush, don't understand that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

deeznuts said:
Verizon store gave me the dot view case and really want to use it daily especially if mods are coming out but how the u use this thing? I can't figure out a one handed way to use it say for quick text message or what not.
Is it normal for phone lid to not sit flush? Seems cheaply made as I don't see how this is on purpose?
Any tips on how to use this thing one handed and how to get the lid to stay closed flush? First ever wallet style case to not sit flush, don't understand that.
Click to expand...
Click to collapse
Looking at your photos I see you have a glass screen protector fitted which is the reason the cover will not close properly. Mine closed perfectly when I got it but now I have fitted a glass protector it is the same as yours so it is not a problem with the case.

You're right. See that now. Would putting rubberbands around it holding it closed tight over night maybe help? Not sure with this rubber strap.

deeznuts said:
You're right. See that now. Would putting rubberbands around it holding it closed tight over night maybe help? Not sure with this rubber strap.
Click to expand...
Click to collapse
I don't have a screen protector and the device never sat completely flush against the screen. To answer your original question, I couldn't figure out how to use it comfortably when needing to use it. Unless I am traveling I don't use the case.

The only thing that I can set that will help out sit flush is if you use a dremmel to remove some of the material from that corner where it first contacts the gals screen protector. There is excess material there that is causing it not to be able to close
Sent from my HTC One_M8 using Tapatalk

Anyone know of a thin temeprrd glass screen protector with round edges on the sides instead of square? Maybe this will help. Mine is only .3mm thick I believe or less but square edges so raised.

[Q] Broken wristband / how to fix it?

Hi xda dev members! Yesterday when i took a 100m run, i fell off and the watch pop out from my hand. And after that i realise that i no longer can use this watch because the band just cant be 'locked'
Here i attached some pictures :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Share your thoughts or way to fix it by replying this thread.. All of your comments are appreciated!
Thanks!

Can you post a few more photos to see where is the problem?
Sent from my SM-N9005 using XDA Free mobile app

I couldn't tell for sure, but it sort of looks maybe like the latch is bent (if not, ignore this). The latch should be almost a 90 angle sticking straight up, maybe angled a hair to the right if sticking straight up and looking from the power button side. Sadly, I couldn't get a clear enough picture at the right angle, but perhaps you could find some to compare. Also try watching some YouTube reviews of the watch that tend to linger on that area. That may be helpful.

If you were having the same issue as me, I fixed it by bending the bottom curved piece more inward. If the two curved pieces don't look right when it's closed, this could be your problem also.
Attached a couple images to try and illustrate this, I think I could even stand to get the curved pieces to line up a little more, but my wristband has a pretty strong latch going so I'm happy as is.

I have the same problem .. did you solve by bending the piece. I could not solve

iluvatar3 said:
If you were having the same issue as me, I fixed it by bending the bottom curved piece more inward. If the two curved pieces don't look right when it's closed, this could be your problem also.
Attached a couple images to try and illustrate this, I think I could even stand to get the curved pieces to line up a little more, but my wristband has a pretty strong latch going so I'm happy as is.
View attachment 3260901
View attachment 3260907
Click to expand...
Click to collapse
You made my day!

Thank you! It Works!
iluvatar3 said:
If you were having the same issue as me, I fixed it by bending the bottom curved piece more inward. If the two curved pieces don't look right when it's closed, this could be your problem also.
Attached a couple images to try and illustrate this, I think I could even stand to get the curved pieces to line up a little more, but my wristband has a pretty strong latch going so I'm happy as is.
View attachment 3260901
View attachment 3260907
Click to expand...
Click to collapse
I tried this now and it seemed to work! Thank you so much for your solution!

Worked for me too
I actually bought a rubbishy eBay strap as I couldn't fix my old one, that strap snapped then I found this thread, bent the clasp as shown in the picture and my original strap is perfect again! Thank you so much for this tip!