Develop Bugs

Slide Isssue. $$$ Reward.

This goes under development because its a problem with my phone regarding the development so before the cyanogen rom release i had eugene's froyo5 and it worked fine.. well my fiance picked up the phone ****ed around with it and now no matter what 2.2 rom i use i can't get INTERNET sites to load or.. MARKET to sync my account or communicate this is with cyanogen rom and eugene's froyo6.. now my wifi will see connections connect and even gather info/ip addy from the wifi however it will not let me load pages ect.. now in 2.1 running the old RADIO + Slidemeroot5 or whatever it's called the stock with root it will go into the wifi/find/communincate and load my MARKET/INTERNET just fine.. so it has to be with a setting that would stay threw data/cache wipe with Cyanogen Kanged heres the thing.. I've wiped many times I've even tried restoring old backups from froyo5 they no longer let me sync/internet/market so.. anyone who can find a solution will receive an IMMEDIATE $20.00 donate and if done in a timely fashion an addition $10.00...
I will not be able to RE-ROOT or UN-ROOT my phone as i do not have my USB cable anymore

check your APN settings dude

Virus, what is with you and trouble?! You two always seem to find each other...
Tuba is right it sounds like your apn settings are wrong or deleted.

tubaking182 said:
check your APN settings dude
Click to expand...
Click to collapse
what do you mean?
sino8r said:
Virius, what is with you and trouble?! You two always seem to find each other...
Click to expand...
Click to collapse
No... Bad-Luck and me seem to be on everyday terms

Your not on t-mobile, so you need to change your APN settings to att

settings>wireless settings>mobile networks>apn settings, then you should be able to add the correct APNs or see what is listed there

tubaking182 said:
settings>wireless settings>mobile networks>apn settings, then you should be able to add the correct APNs or see what is listed there
Click to expand...
Click to collapse
no APN listed

Virus1x said:
what do you mean?
No... Bad-Luck and me seem to be on everyday terms
Click to expand...
Click to collapse
Lol! Yeah, it sounds about right. I have'd had that streak before.
menu, settings, wireless networks, mobile networks, access point name
Google tmobile apn android and they'll list the proper apn settings. I don't have time to type them all out right now.
oppsy, I see some folks beat me to it and you need the at&t settings anyways. Just google at&t android apn settings. That should do it.

you will need proper APN setting for your carrier, google that shiz and you should be good to go, then you will just need to add the APN to your phone from that same screen
apns are different for each carrier, google APN <carrier> mytouch slide(or just android)

sino8r said:
Lol! Yeah, it sounds about right. I have'd had that streak before.
menu, settings, wireless networks, mobile networks, access point name
Google tmobile apn android and they'll list the proper apn settings. I don't have time to type them all out right now.
Click to expand...
Click to collapse
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T

Virus1x said:
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Click to expand...
Click to collapse
Huh? No data plan huh. Yeah, that will matter. Umm, so you have been using wifi to access internet right?
Okay from what I understand... wifi is real iffy with the 2.2 ports. You might have to select static and type in your ip settings from your pc. Just go on the pc and run command prompt and type ipconfig. That will tell your ip setting and enter them into the correct slots on your phone. Its under menu settings wireless& networks wifi settings menu advanced select static ip

well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?

tubaking182 said:
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
Click to expand...
Click to collapse
Yeah, he's basically saying wifi isnt sending data to the phone. I edited my previous post to show him how to set up a static network.

tubaking182 said:
well is data is off then you aren't going to be getting on the interwebs, are you saying that with wifi you can't load pages?
Click to expand...
Click to collapse
yes I had wifi working fine on newslide.zip or myupdate.zip from eugene and all builds before in last 2 days wifis has stopped working... unknown why

Reread the first post. It says my WIFI will connect info and all that and above he states he doesn't have a data plan so its going to have to be wifi hes on.
Now I am having the same problem ever since I flashed the ROM and wiped twice and reflashed twice. Trying static IP now.

alas no luck on STATIC, question is why would I need to set up static when it should auto connect and auto know ya know? i'd like to be able to use WIFI outside of my home aswell

So right now it doesn't work on any rom now? If it's the cyan kernel, try dumfuq's oc kernel, I know it sounds strange but i tried one of cyan's kernel and somethings stopped working, led flashlight is one...Tried the new dumfuq and it worked for me. No promises though that it will work for your wifi problem.

your ip address of your router is 192.168.0.1 which means that your IP address of your phone will have to be 192.168.0.x since the computer is 192.168.0.199 i would try something around the 199 range(try going plus or minus 10) so either 192.168.0.189 or 192.168.0.209
also you will have to set subnet mask to 255.255.255.0 and gateway to 192.168.0.1

Ace42 said:
So right now it doesn't work on any rom now? If it's the cyan kernel, try dumfuq's oc kernel, I know it sounds strange but i tried one of cyan's kernel and somethings stopped working, led flashlight is one...Tried the new dumfuq and it worked for me. No promises though that it will work for your wifi problem.
Click to expand...
Click to collapse
will attempt wipe..
flash cyanogen rom
flash kernel
flash new radio
flash GAPPS
and tell ya
allows for surfing via browser doesn't fix my Market/google issue
ERROR from Market..
You don't have a network connection.
This could be a temporary problem or your phone may not be provisioned for data services. please try again when connected to a mobile network or connect to a wifi network, if the problem continues call customer service..
then gives me option to connect to wifi but i am connected

Virus1x said:
I don't have a DATA plan so data is turned off will this matter? also I'm on AT&T
Click to expand...
Click to collapse
If it worked before on myfroyo 5, then push the apn.conf into /system/etc
or
You can try pushing the apn.conf file from the aria into /system/etc
then do a factory reset..
may or may not work
~Eugene

T-Mobile is being very tricky and devious with blocking tethering

So over the past week, I've discovered that Fabio Grasso's Wifi Tether Router app has stopped working for my t-mobile LG G3. I tried different configurations, tried e-mailing the dev, and I tried changing the APN. None of it worked.
(Regarding the APN, he says to change T-Mobile to IPv4, but I can only change it to IPv4/IPv6. If I try putting solely IPv4, then my data connection drops out entirely).
Moving on, anyway, I've found out that if I use the Wifi tether router app, I can only access HTTPS sites. For example, any banking site, facebook, google, yahoo, etc. all work as long as I stick https:// in front of it. However, anything else won't work (like xda).
So I can only assume that T-mobile is somehow blocking that traffic...and now I need a way to disguise my own traffic...
I tried connecting through OpenVPN through a VPN I had, but even that won't connect properly.
And before anybody says to install the stock tether app Mod, I'm still on the stock recovery so I can't flash anything.
I'm on the stock recovery (but I'm still rooted) because I prefer to mess with my device as little as possible. I want to keep it as stable as possible, and having a stock recovery means I'm not tempted to go out and install new ROMs or flash anything that could potentially brick my device.
So...does anybody have any solutions? This is like a tug-of-war with T-Mobile, and right now it's in their favor.

This is old news. T-mobile made it knonw they would start blocking tether if it is being mistreated. Devs will have to become more clever and trickier with their apps. With this in mind, just be careful. They said anything that goes against the contract you signed regarding their data usage / tethering will cause your tethering to be cut of if data not cut of for that month (can't remember the full detail)

mgbotoe said:
This is old news. T-mobile made it knonw they would start blocking tether if it is being mistreated. Devs will have to become more clever and trickier with their apps. With this in mind, just be careful. They said anything that goes against the contract you signed regarding their data usage / tethering will cause your tethering to be cut of if data not cut of for that month (can't remember the full detail)
Click to expand...
Click to collapse
Well this is the first time I've experienced any issues. I have a total of 11gb usage this month, and it's almost over. 95% of usage is on mobile, so I see no reason for them to even become suspicious. I doubt I'll be cut off. The "warning" they gave a couple weeks ago referred to like 20 customers or something that were using hundreds of gigs of data.
In any case, I really hope devs can find permanent ways around this.
By the way, I don't really understand ports/encryption, but I know that "443" is secured, so how possible is it for me to just manually make everything go through that port?

crazylilazn said:
So over the past week, I've discovered that Fabio Grasso's Wifi Tether Router app has stopped working for my t-mobile LG G3. I tried different configurations, tried e-mailing the dev, and I tried changing the APN. None of it worked.
(Regarding the APN, he says to change T-Mobile to IPv4, but I can only change it to IPv4/IPv6. If I try putting solely IPv4, then my data connection drops out entirely).
Moving on, anyway, I've found out that if I use the Wifi tether router app, I can only access HTTPS sites. For example, any banking site, facebook, google, yahoo, etc. all work as long as I stick https:// in front of it. However, anything else won't work (like xda).
So I can only assume that T-mobile is somehow blocking that traffic...and now I need a way to disguise my own traffic...
I tried connecting through OpenVPN through a VPN I had, but even that won't connect properly.
And before anybody says to install the stock tether app Mod, I'm still on the stock recovery so I can't flash anything.
I'm on the stock recovery (but I'm still rooted) because I prefer to mess with my device as little as possible. I want to keep it as stable as possible, and having a stock recovery means I'm not tempted to go out and install new ROMs or flash anything that could potentially brick my device.
So...does anybody have any solutions? This is like a tug-of-war with T-Mobile, and right now it's in their favor.
Click to expand...
Click to collapse
Download THIS zip and extract it then find the APN XML and replace your old one with the one in the zip you extracted. Boom you should have full ipv4 for your tether app and vpn.
Make sure you rename instead of completely replacing. You'll probably need to restart and if it still doesn't work that means dalvik needs to be wiped and your Sol unless you want to install twrp. Unless a app exists that can wipe dalvik without recovery.

ThePagel said:
Download THIS zip and extract it then find the APN XML and replace your old one with the one in the zip you extracted. Boom you should have full ipv4 for your tether app and vpn.
Click to expand...
Click to collapse
Okay now this is getting interesting.
Although this is getting into brick-able territory. With my LG G2 when I messed with build.prop I almost soft-bricked it.
In any case, I can't seem to find out exactly how to modify the APN XML, and a quick google search is just showing me "apns-conf.xml", is that the same thing? Is it just a value inside build.prop?
Also, the warning on the xda mod page says "TETHER BROKE FOR NOW". Does that only apply to stock tether or something?
Edit: Nevermind, looked through the zip file and it turns out the apns-conf.xml file is under system/etc.
I'm still worried that this could cause some damage though. Lemme just double check - not brickable if I just replace, correct? and Also, I can create a backup of the apns-conf.xml and restore it without any issue, correct?

crazylilazn said:
Okay now this is getting interesting.
Although this is getting into brick-able territory. With my LG G2 when I messed with build.prop I almost soft-bricked it.
In any case, I can't seem to find out exactly how to modify the APN XML, and a quick google search is just showing me "apns-conf.xml", is that the same thing? Is it just a value inside build.prop?
Also, the warning on the xda mod page says "TETHER BROKE FOR NOW". Does that only apply to stock tether or something?
Click to expand...
Click to collapse
Yes stock tether but the APN in that zip won't wreck it its the build prop edits that broke built-in tether. You won't need to do any builp prop edits just swap out your APN.XML for the one located in that zip.

ThePagel said:
Yes stock tether but the APN in that zip won't wreck it its the build prop edits that broke built-in tether. You won't need to do any builp prop edits just swap out your APN.XML for the one located in that zip.
Click to expand...
Click to collapse
Alright cool, well I looked through the zip file and I found what to replace, just wanted to double check though (made an edit above but you won't get the notification for that)
So to be clear - I change the apns-conf.xml file under system/etc , correct?
and 2) This has no possibility of breaking my device?
and 3) If I create a backup of my current apns-conf.xml , and then in the future I want to restore that backup, there will be no issue/conflict?
Thanks for the help

crazylilazn said:
Alright cool, well I looked through the zip file and I found what to replace, just wanted to double check though (made an edit above but you won't get the notification for that)
So to be clear - I change the apns-conf.xml file under system/etc , correct?
and 2) This has no possibility of breaking my device?
and 3) If I create a backup of my current apns-conf.xml , and then in the future I want to restore that backup, there will be no issue/conflict?
Thanks for the help
Click to expand...
Click to collapse
1 yes
2 always the possibility but extremely unlikely
3 yes but just like #2 you could possibly run into complications but its unlikely.
---------- Post added at 11:34 PM ---------- Previous post was at 11:22 PM ----------
I'm going to bed if you don't have data or 4g upon reboot go into network mode and select gsm/wcdma/lte

ThePagel said:
1 yes
2 always the possibility but extremely unlikely
3 yes but just like #2 you could possibly run into complications but its unlikely.
---------- Post added at 11:34 PM ---------- Previous post was at 11:22 PM ----------
I'm going to bed if you don't have data or 4g upon reboot go into network mode and select gsm/wcdma/lte
Click to expand...
Click to collapse
I looked through that entire thread last night, and I discovered that somebody was having issues with Wifi calling after installing the mod, so I got nervous and backed out even though I've already created a backup of the xml, lol.
Do you know if wifi calling + texting still works? That's a dealbreaker for me if it doesn't, because I use wifi calling/texting all the time.

crazylilazn said:
I looked through that entire thread last night, and I discovered that somebody was having issues with Wifi calling after installing the mod, so I got nervous and backed out even though I've already created a backup of the xml, lol.
Do you know if wifi calling + texting still works? That's a dealbreaker for me if it doesn't, because I use wifi calling/texting all the time.
Click to expand...
Click to collapse
They do I use it every day.

crazylilazn said:
Alright cool, well I looked through the zip file and I found what to replace, just wanted to double check though (made an edit above but you won't get the notification for that)
So to be clear - I change the apns-conf.xml file under system/etc , correct?
and 2) This has no possibility of breaking my device?
and 3) If I create a backup of my current apns-conf.xml , and then in the future I want to restore that backup, there will be no issue/conflict?
Thanks for the help
Click to expand...
Click to collapse
apns-conf.xml does not break WiFi calling or texting. This is where the tethering APN is stored. What could break WiFi calling is modifying build.prop.
I'm pretty sure they have deep packet inspection on their network and they can tell exactly what kind of traffic is being done. Any traffic using the fast.t-mobile.com APN that doesn't look like mobile can be very easily blocked. You can't deep packet inspect SSL (https) traffic, so I'm not surprised this works but everything else does not. An SSL VPN would get around this.
I'm using the PrimeTether mod which basically modifies the stock tethering to use the mobile APN so that your data looks like it's coming from the phone. WiFi Tether Router might be doing something different that T-Mobile can see and that's how they are blocking it. It actually might be that WiFi Tether Router is tethering using IPV4. The stock tether app tethers with IPV6.

havanahjoe said:
apns-conf.xml does not break WiFi calling or texting. This is where the tethering APN is stored. What could break WiFi calling is modifying build.prop.
I'm pretty sure they have deep packet inspection on their network and they can tell exactly what kind of traffic is being done. Any traffic using the fast.t-mobile.com APN that doesn't look like mobile can be very easily blocked. You can't deep packet inspect SSL (https) traffic, so I'm not surprised this works but everything else does not. An SSL VPN would get around this.
I'm using the PrimeTether mod which basically modifies the stock tethering to use the mobile APN so that your data looks like it's coming from the phone. WiFi Tether Router might be doing something different that T-Mobile can see and that's how they are blocking it. It actually might be that WiFi Tether Router is tethering using IPV4. The stock tether app tethers with IPV6.
Click to expand...
Click to collapse
The prime tether changes one line in the framework-res to the fast APN. At least that's all I had to do. I never released my version because auto beat me to the upload.

ThePagel said:
The prime tether changes one line in the framework-res to the fast APN. At least that's all I had to do. I never released my version because auto beat me to the upload.
Click to expand...
Click to collapse
He changed more than that. I had made that change to framework-res but was still having issues with my stock tether. There's a check being done by the tether process. I believe he modified the smali code to get around this, just like it had to be done for the G2.

havanahjoe said:
He changed more than that. I had made that change to framework-res but was still having issues with my stock tether. There's a check being done by the tether process. I believe he modified the smali code to get around this, just like it had to be done for the G2.
Click to expand...
Click to collapse
Are you sure? The change plus the APN XML I use worked flawlessly for me. Perhaps it was just the perfect storm of mods I had at the time.

ThePagel said:
Are you sure? The change plus the APN XML I use worked flawlessly for me. Perhaps it was just the perfect storm of mods I had at the time.
Click to expand...
Click to collapse
I believe so, but could be wrong. I couldn't get it to work and had zeroed in on the smali file that needed to be changed. I believe I did a checksum comparison and found them to be different.
Without prime's mod I could only tether up to my 3 GB bucket or had to do a dirty hack to hostapd for it to allow wireless clients to connect. It would default to 0 clients for some reason. Maybe I had a weird storm of mods that broke it.

havanahjoe said:
I'm using the PrimeTether mod which basically modifies the stock tethering to use the mobile APN so that your data looks like it's coming from the phone. WiFi Tether Router might be doing something different that T-Mobile can see and that's how they are blocking it. It actually might be that WiFi Tether Router is tethering using IPV4. The stock tether app tethers with IPV6.
Click to expand...
Click to collapse
The way you worded that, you describe Prime's mod as using IPv6 to work around Tmo's tether limit, but it doesn't, it must use IPv4 to "mask" it.
When I change the APN back to IPv6, my hotspot enables but does not work whatsoever, nothing loads on my laptop, it'll connect and obtain an IP but no traffic is sent nor received over the phone's data. Can't remember if it's suppose to be like that or not, but IPv4 works, IPv6 does not with hotspot, but data stills work either way on the phone itself. I'll post over in Prime's thread about this.
BTW, WiFi Tether Router borked for me two about three weeks ago, a few days after Prime's mod came up, luckily. Been using it ever since. :highfive:

JustLok said:
The way you worded that, you describe Prime's mod as using IPv6 to work around Tmo's tether limit, but it doesn't, it must use IPv4 to "mask" it.
When I change the APN back to IPv6, my hotspot enables but does not work whatsoever, nothing loads on my laptop, it'll connect and obtain an IP but no traffic is sent nor received over the phone's data. Can't remember if it's suppose to be like that or not, but IPv4 works, IPv6 does not with hotspot, but data stills work either way on the phone itself. I'll post over in Prime's thread about this.
BTW, WiFi Tether Router borked for me two about three weeks ago, a few days after Prime's mod came up, luckily. Been using it ever since. :highfive:
Click to expand...
Click to collapse
It has been a while so I forgot how Prime and WiFi Tether Router worked. The stock tether app, with the stock tethering APN uses IPV6, but you're right, Prime's mod uses IPV4 with the mobile data APN.
WiFi Tether Router implements its own DHCP server, iptables and hostapd configuration. Something in the way it does things makes the traffic look different from the stock tether traffic, so T-Mobile is able to block it.

havanahjoe said:
It has been a while so I forgot how Prime and WiFi Tether Router worked. The stock tether app, with the stock tethering APN uses IPV6, but you're right, Prime's mod uses IPV4 with the mobile data APN.
WiFi Tether Router implements its own DHCP server, iptables and hostapd configuration. Something in the way it does things makes the traffic look different from the stock tether traffic, so T-Mobile is able to block it.
Click to expand...
Click to collapse
This is remarkable to me. It SHOULD look completely the same with the exception of user-agent (which is easy to spoof).
I've been using EasyTether (the USB version) and they have yet to figure out how to block that AFAICT.

starkruzr said:
This is remarkable to me. It SHOULD look completely the same with the exception of user-agent (which is easy to spoof).
I've been using EasyTether (the USB version) and they have yet to figure out how to block that AFAICT.
Click to expand...
Click to collapse
That was my assumption, but I don't see why it would be different either.
I just tried WiFi Tether Router on my phone and it worked just as well as it had in the past. I did some tcpdumps and the traffic looks the same on both. My guess then would be the users that are getting throttled or blocked are doing things that are CLEARLY not mobile phone traffic.
Another user did 32 GB of Xbox Live traffic while using the PrimeTether mod and was throttled. Surprise? No.
Those getting blocked or throttled are probably abusing the system.

Wifi tether router works for me on my tmobile S5.

[Q] Devices don't see Wifi Tether Rotuer Hotspot after Lollipop update

Hi There
First post!
I have a Note 3 on T-mobile.
So I had rooted kitkat using this method: http://www.galaxynote3update.com/root-tmobile-galaxy-note-3-sm-n900t-no-knox-counter-trip/ and had been using Wifi Tether router to have unlimited tethering while i'm at work.
I used this method to get to the new lollipop when it became available for my phone: http://forum.xda-developers.com/not...icial-lollipop-n900tuvufob5-t-mobile-t3046295
and now Wifi Tether Router runs, enables the hotspot, but none of my devices can see the hotspot. I've tried the SQL thing, and someone suggested trying to set the encryption to Open instead of WPA2, but that doesn't work either.
anyone else having this issue or have a fix?

gohanrocs12 said:
Hi There
First post!
I have a Note 3 on T-mobile.
So I had rooted kitkat using this method: http://www.galaxynote3update.com/root-tmobile-galaxy-note-3-sm-n900t-no-knox-counter-trip/ and had been using Wifi Tether router to have unlimited tethering while i'm at work.
I used this method to get to the new lollipop when it became available for my phone: http://forum.xda-developers.com/not...icial-lollipop-n900tuvufob5-t-mobile-t3046295
and now Wifi Tether Router runs, enables the hotspot, but none of my devices can see the hotspot. I've tried the SQL thing, and someone suggested trying to set the encryption to Open instead of WPA2, but that doesn't work either.
anyone else having this issue or have a fix?
Click to expand...
Click to collapse
Hey, i managed to get it working by changing the SSID. For some reason keeping the SSID i used before the Lollipop update wouldn't let it be seen.

Pls am having the same problem... How did u resolve yours Mr gohanrocs12.. How did u change ur ssid?

Ssid is the name that identifies your wifi network, like Netgear 77, or Lynksys. It's typically the name your network wifi router comes with when you take it out of the box and set it up.
You access it with a computer based settings program that comes with the router allowing you to change settings on your router. .
Pp.

Now UV got me in a maze.. Pls can u gv me a good link on how to do the work.. M not really a tech guru mate... Thanks

jiggah100 said:
Now UV got me in a maze.. Pls can u gv me a good link on how to do the work.. M not really a tech guru mate... Thanks
Click to expand...
Click to collapse
Try Google and youtube, you will find a bunch of stuff on it. Use your brand of WiFi router in search to get more specific answers.
Pp.

jiggah100 said:
Now UV got me in a maze.. Pls can u gv me a good link on how to do the work.. M not really a tech guru mate... Thanks
Click to expand...
Click to collapse
uninstall tether app, reboot, reinstall. tether app drained my hotspot data on my plan after flashing stock lollipop.

@ bigred850 pls how and which section of my device will I find the tether app man... Thanks a lot

Missing Hotspot and Data Toggles?

how can i get these toggles? i have tried that quickpanel restore app from samsung and nothing. also tried that multiwindow mod thing and nothing.

Who is your cell provider. I'm updating the hotspot flash to fix *all* carriers in one shot (it currently only fixes up Sprint), so interested in your situation.

tdhite said:
Who is your cell provider. I'm updating the hotspot flash to fix *all* carriers in one shot (it currently only fixes up Sprint), so interested in your situation.
Click to expand...
Click to collapse
Hey man. When I used your installer, tethering works great on LTE, but fails to work on 3G. Any ideas?

elesbb said:
Hey man. When I used your installer, tethering works great on LTE, but fails to work on 3G. Any ideas?
Click to expand...
Click to collapse
Ideas I have, and fixes I have. The issue (hopefully) is the fact that the hotspot fix is not updating all possible APNs. I rewrite the init.d script to update all APNs that have MMS capability to allow tethering. I'm testing, will upload and update my hotspot thread tomorrow assuming all goes well.

tdhite said:
Ideas I have, and fixes I have. The issue (hopefully) is the fact that the hotspot fix is not updating all possible APNs. I rewrite the init.d script to update all APNs that have MMS capability to allow tethering. I'm testing, will upload and update my hotspot thread tomorrow assuming all goes well.
Click to expand...
Click to collapse
So I can just add the "dun" to all the APNs? I will try that right now actually. I have Sqlite3 Editor app. I love it!
Oh I also felt this was the issue, but wasn't sure which APN to edit.

I don't get it. I thought that you couldn't hotspot your data if you had unlimited data from Sprint. Im rooted and have been looking for apps to allow me to create a wifi hotspot so I can use my chromecast in the car. I was thinking I needed to change my rom. Is that not the way to go?

tdhite said:
Who is your cell provider. I'm updating the hotspot flash to fix *all* carriers in one shot (it currently only fixes up Sprint), so interested in your situation.
Click to expand...
Click to collapse
im on sprint. whats your hotspot flash? ill give it a try.

Bypass Tethering Cap Moto G7 Power XT1955-5 Metro PCS Variant

As we all know, Android Pie has been giving quite a few folks problems on the tethering front. And so far, the G7 Power, at least for me, is in that group.
The method I used was USB-less, because this phone charges anytime you plug it into any device, and going through the cable to my computer just wasn't a great option as I'm trying to save this battery that doesn't easily come out.
I used:
VPN Hotspot
VPN Tether
Express VPN
PhCyber Pro
Opened Express VPN first. Then PhCyber Pro. This is because Express VPN does not play nice with VPN Tether but PhyCyber does, and you want to make sure that the tab on Express VPN that says all apps connect through VPN is clicked. Then I turned on Hotspot, making sure to enable the Wifi and the Wlan0. Then I turned on VPN Tether. From that I was able to use the connection.
So far, so good. Hit 20GB with no throttling. Battery goes out in about six hours with continuous usage give or take. Anybody want to test it and see what happens? Or if you have a better method, lay it out - I'm ALL EARS.:good::good:

Articul8Madness said:
As we all know, Android Pie has been giving quite a few folks problems on the tethering front. And so far, the G7 Power, at least for me, is in that group.
The method I used was USB-less, because this phone charges anytime you plug it into any device, and going through the cable to my computer just wasn't a great option as I'm trying to save this battery that doesn't easily come out.
I used:
VPN Hotspot
VPN Tether
Express VPN
PhCyber Pro
Opened Express VPN first. Then PhCyber Pro. This is because Express VPN does not play nice with VPN Tether but PhyCyber does, and you want to make sure that the tab on Express VPN that says all apps connect through VPN is clicked. Then I turned on Hotspot, making sure to enable the Wifi and the Wlan0. Then I turned on VPN Tether. From that I was able to use the connection.
So far, so good. Hit 20GB with no throttling. Battery goes out in about six hours with continuous usage give or take. Anybody want to test it and see what happens? Or if you have a better method, lay it out - I'm ALL EARS.:good::good:
Click to expand...
Click to collapse
Since I have a backup laptop , I use pda tether via USB , then share the pda connection via windows 10 hotspot share.
Easy set up first use any wifi connection to activate the local area connection 15. Then turn off the wifi leaving on the windows hotspot, then connect pda USB and go to adapter settings in windows and share the pda connection to the local area connection 15. Bam hotspot for the entire house no throttle no detection from carrier since it's pda USB..
Doing this for months on MetroPCS. I average 79 gigs per month.
Battery stays at 100 since it's connected via USB all day. I bought two Moto g7 powers for this reason. The data speeds are perfect in my area. Use H instead of LTE for an average of 6-7 mb download speeds during peak hours 9am to 10pm. Then use LTE during off peak times for speeds of around 30 mb download speeds. The service is so good and reliable I don't pay timewarner aka spectrum no more $$$.
I just keep my Moto g7 power on H all day everyday for the best non throttled data. Lastly use T-Mobile apn and add dun. Some reason using MetroPCS apn I get choppier service when streaming. Using T-Mobile apn I steam all day at 720 p with no buffing. I tested the hotspot devices and they get 720 p steaming with no buffering either. Hope this helps anyone like it helped me.
PS. One last note. Since last Friday my motog7power displays T-Mobile on the drop down menu now. I've change to Tmobile apn on several devices in recent years and this phone is the first one to display T-Mobile although my sim card is MetroPCS. I do have the retail stock rom on June 1st security patch rooted.
Before I would use Xposed and use custom text app to edit the carrier name. I'm glad I don't have to use Xposed anymore for that reason.
Edit now drop down reads metro by T-Mobile. They must be updating towers.

jhjhjhjhjhjh said:
.
Click to expand...
Click to collapse
Not working for me. Can you leave some detailed instructions on how you got pda net to work? I keep getting errors saying pda wasn't made for my device.
Also, cannot change ANY MetroPCS APN settings. Everything is greyed out. Any hopes on that one? Tried making a tmobile one, saved it, it auto deleted.

Articul8Madness said:
Not working for me. Can you leave some detailed instructions on how you got pda net to work? I keep getting errors saying pda wasn't made for my device.
Also, cannot change ANY MetroPCS APN settings. Everything is greyed out. Any hopes on that one? Tried making a tmobile one, saved it, it auto deleted.
Click to expand...
Click to collapse
Make sure your on a non branded stock rom. Download the retus or retail firmware from the website linked in the return to stock thread. Fastboot flash the firmware.
You should be able to change apn settings on the retail stock roms.
Let me know if need further assistance.
As far as pda i use foxfi. Paid key version and select activate USB mode. See pic below.

jhjhjhjhjhjh said:
Make sure your on a non branded stock rom. Download the retus or retail firmware from the website linked in the return to stock thread. Fastboot flash the firmware.
You should be able to change apn settings on the retail stock roms.
Let me know if need further assistance.
As far as pda i use foxfi. Paid key version and select activate USB mode. See pic below.
Click to expand...
Click to collapse
I'm on the RETUS rom (March 1st). No MetroPCS stock rom. Still not highlighted.

Articul8Madness said:
I'm on the RETUS rom (March 1st). No MetroPCS stock rom. Still not highlighted.
Click to expand...
Click to collapse
I'm on Retail.
Weird. Try the updated firmware . June patch. I'm rocking it no problems rooted.
Make sure your sim card isn't in during the flashing of the stock rom. Also wipe your device clean .(factory reset) That's what I did.
PS. My wife is so amazed of the battery, performance and the modifications I did to this phone. She wants a Moto g7 power now and giving up her iPhone 7s plus lol. Said the youtube Vance mod is her favorite. She loves youtube without interruptions...
I must say this phone is a Beast. Highly underrated.

jhjhjhjhjhjh said:
I'm on Retail.
Weird. Try the updated firmware . June patch. I'm rocking it no problems rooted.
Make sure your sim card isn't in during the flashing of the stock rom. Also wipe your device clean .(factory reset) That's what I did.
PS. My wife is so amazed of the battery, performance and the modifications I did to this phone. She wants a Moto g7 power now and giving up her iPhone 7s plus lol. Said the youtube Vance mod is her favorite. She loves youtube without interruptions...
I must say this phone is a Beast. Highly underrated.
Click to expand...
Click to collapse
I've done all you've suggested. I've also deleted /played with the APN.xml file. No dice. It may be because my phone is locked to them - reading more about this apparently Google is locking the APN settings down. There has to be a way to edit them.
Even editing build prop did nothing to ungrey it out.

Articul8Madness said:
I've done all you've suggested. I've also deleted /played with the APN.xml file. No dice. It may be because my phone is locked to them - reading more about this apparently Google is locking the APN settings down. There has to be a way to edit them.
Even editing build prop did nothing to ungrey it out.
Click to expand...
Click to collapse
Wow. I'm still locked to metro for another 87 days. As you have seen I can edit my apn. I did this right after I inserted my sim back in. I have no idea now why you can't edit your apn. Both my Moto g7 powers I've edited both apns.

jhjhjhjhjhjh said:
Wow. I'm still locked to metro for another 87 days. As you have seen I can edit my apn. I did this right after I inserted my sim back in. I have no idea now why you can't edit your apn. Both my Moto g7 powers I've edited both apns.
Click to expand...
Click to collapse
I've checked both the G7s after flashing and they both are greyed out. I'm going to flash a RETEU rom and see if that corrects the problem.
I've been tinkering with this all day and now I've been "locked" out of even looking at the APN.

jhjhjhjhjhjh said:
Wow. I'm still locked to metro for another 87 days. As you have seen I can edit my apn. I did this right after I inserted my sim back in. I have no idea now why you can't edit your apn. Both my Moto g7 powers I've edited both apns.
Click to expand...
Click to collapse
Ok, I went back and reread carefully the entire conversation. I thought I was supposed to change the MetroPCS settings, that's the part that was greyed out for me. I see you made a separate entry for TMO. I went ahead and did that, but for good measure, can you take a complete screenshot of your settings top to bottom, your previous pic was only the bottom.
I've clicked the button. It still says Metro by TMO, but I'm PDA/FoxFI tethering via USB right now and the speeds are pretty gnarly - I think they could be faster.
It's a fresh RETUS flash BTW.

Articul8Madness said:
Ok, I went back and reread carefully the entire conversation. I thought I was supposed to change the MetroPCS settings, that's the part that was greyed out for me. I see you made a separate entry for TMO. I went ahead and did that, but for good measure, can you take a complete screenshot of your settings top to bottom, your previous pic was only the bottom.
I've clicked the button. It still says Metro by TMO, but I'm PDA/FoxFI tethering via USB right now and the speeds are pretty gnarly - I think they could be faster.
It's a fresh RETUS flash BTW.
Click to expand...
Click to collapse
Ok cool.
Here's two pics of the apn settings I use

Data speeds of what I get in my area
H = HighSpeedDataAccess, average around 6mb download and 1.7mb upload during off-peak times.
LTE= Long Term Evolution, average around 44mb download and 38mb upload during off peak times..

jhjhjhjhjhjh said:
Ok cool.
Here's two pics of the apn settings I use
Click to expand...
Click to collapse
Ok. Our data entries match.
I tried PDA NET, the newer foxfi goes straight to the PDA app. I did the USB tether just because my battery was down. Any way to check if its going against my tethering limit? I see where they say how much data I've used, but the hotspot on the phone ain't on.
Also, have you tried the Magisk Tethering App? Its a module that is supposed to do what FoxFi/PDAnet does.

jhjhjhjhjhjh said:
Data speeds of what I get in my area
H = HighSpeedDataAccess, average around 6mb download and 1.7mb upload during off-peak times.
LTE= Long Term Evolution, average around 44mb download and 38mb upload during off peak times..
Click to expand...
Click to collapse
My speed test on that site was at noon....
Download 128.68 Mbps
Jitter 11Ms
Ping 103.0 Ms
32.10 Mpbs

Articul8Madness said:
Ok. Our data entries match.
I tried PDA NET, the newer foxfi goes straight to the PDA app. I did the USB tether just because my battery was down. Any way to check if its going against my tethering limit? I see where they say how much data I've used, but the hotspot on the phone ain't on.
Also, have you tried the Magisk Tethering App? Its a module that is supposed to do what FoxFi/PDAnet does.
Click to expand...
Click to collapse
The way to check tethering limit is hit #611 on dialer the ivr system will say how much hotspot you ve used in realtime.
Yes I've tried the magisk tether to no avail. I can't get it to function better than the method I use.
---------- Post added at 07:18 PM ---------- Previous post was at 07:18 PM ----------
Articul8Madness said:
My speed test on that site was at noon....
Download 128.68 Mbps
Jitter 11Ms
Ping 103.0 Ms
32.10 Mpbs
Click to expand...
Click to collapse
Great speeds

jhjhjhjhjhjh said:
The way to check tethering limit is hit #611 on dialer the ivr system will say how much hotspot you ve used in realtime.
Yes I've tried the magisk tether to no avail. I can't get it to function better than the method I use.
---------- Post added at 07:18 PM ---------- Previous post was at 07:18 PM ----------
Great speeds
Click to expand...
Click to collapse
Drinks on me....called 611.."If you have hotspot data, you haven't used ANY OF IT!!!!"
:highfive::highfive::highfive::highfive::highfive::highfive::highfive::highfive::cyclops::cyclops::cyclops::cyclops::cyclops::cyclops::cyclops:

ADB tethering apps like PdaNet and EasyTether impact performance and reliability for me, so I try to avoid them when possible. Native tether on T-Mobile just requires that your traffic goes through the mobile APN and packets leaving your phone have the standard TTL of 64.
The easiest way is to just use VPN Tether or Tether Hotspot with free local VPN servers like AdClear or Adguard. You can ofc disable the ad blocking features if you want. The downside is that you have to manually enable the routing every time, it's not plug and play. This does bypass the APN and TTL requirements though.
To change the APN you can
1 - create a copy of your APN and add dun to the APN Type
2 - set tether_dun_required 0
3 - edit apns-conf.xml
Modifying the TTL is a bit tougher, standard kernels don't let you use iptables to mangle packets like that. You have to do it on the other device, be it a PC or router or whatever. I recommend an OpenWRT compatible or Asus router if you want to do this. I'm using a Linux dev board running between my phone and router for this atm.
You don't need to flash a different firmware for this to work. Moto is also running standard Android(as opposed to LG or Samsung), so if you want usb tethering as default, all you have to do is set it in the developer settings. You need something like Auto USB Tether for that on non-standard devices.
Edit: Magisk Tether Enabler is just for setting net.tethering.noprovisioning to disable the carrier provisioning check(not needed if your plan supports hotspot) and Xposed XTether is to bypass custom manufacturer tether provisioning apps(not applicable on this device).
Edit 2: If your concerned about charging while using USB tethering, you can use Battery Charge Limit or Advanced Charging Controller to control it.

Another option is to use Termux to start an SSH server with DropBear (easy passwd login) and connect using ssh's built in SOCKS forwarding.
On your pc run:
ssh -D localhost:1234 [email protected] -p 8022
Replace user with either root or the termux username (like u0_a230) and phoneip with your phone's local ip. It'll work if you're connected to a router/hotspot without an internet connection, for instance use your pc to make the hotspot or run a wifi direct hotspot like in pdanet, just as long as your two devices can communicate with each other.
After you've established your ssh connection just set up a socks proxy on the pc through localhost port 1234 and you're good to go! I use macos and the proxy settings are right there in network settings but I'm pretty sure Windows and Linux both allow you to do it natively as well.
Don't need a VPN and doesn't count as hotspot usage.
To put the ssh instance in the background add -f -N to the command.

I have been abusing T-Mobile's tethering restrictions from day one, typically through MVNO's such as MetroPCS or SimpleMobile. Used to be able to change a browsers user-agent string on a pc to that of a mobile browser, then it was running an ssh server on the phone to run SSH dynamic port forwarding as a SOCKS proxy , and finally there's the TTL trick, which works now and has lasted the longest yet. You change the ttl (on the device you want to tether to) from 64 to 65. Most Unix style systems, this a one-liner on the ol shell prompt for example: echo 65 >/proc/sys/net/ipv4/ip_default_ttl I have no idea how to do this on Windows, but I understand it's possible. Lately ipv6 has been a problem, the solution is to disable ipv6 in your APNs(ALL OF THEM) to fix the APN with DUN I use this after disabling selinux temporarily until change is made.....
Post #8
https://forum.xda-developers.com/pixel-xl/help/android-8-1-how-to-edit-cellular-apn-t3697425
There is also a way to DROP ipv6 packets via ip6tables, which I will get down on this device after I get a handle on this A/B slot sh** we get to deal with(I just bricked the thing and got it back with blank-flash) APN/TTL thing is working for me, also it's not device specific. I have a script I put together on the E5 Play(working on the g7 power as well) that repeats xfinitywifi(or any other wifi) as a softap/hotspot to other devices without a MAC address registered on xfinity, no cellular connection at all. Could come in handy as this specific tethering trick evolves, I have an arsenal of other resources as well. Please don't hesitate to ask if you think I could help in any way...
ipv6 DROP info, what became of droidwall if i'm not mistaken. AFWALL has a feature that reduces to a small script left in Magisk's service.d directory.
https://github.com/ukanth/afwall/wiki/CustomScripts
example:
# Deny IPv6 only connections
$IP6TABLES -P INPUT DROP
$IP6TABLES -P FORWARD DROP
$IP6TABLES -P OUTPUT DROP

mrbox23 said:
I have been abusing T-Mobile's tethering restrictions from day one, typically through MVNO's such as MetroPCS or SimpleMobile. Used to be able to change a browsers user-agent string on a pc to that of a mobile browser, then it was running an ssh server on the phone to run SSH dynamic port forwarding as a SOCKS proxy , and finally there's the TTL trick, which works now and has lasted the longest yet. You change the ttl (on the device you want to tether to) from 64 to 65. Most Unix style systems, this a one-liner on the ol shell prompt for example: echo 65 >/proc/sys/net/ipv4/ip_default_ttl I have no idea how to do this on Windows, but I understand it's possible. Lately ipv6 has been a problem, the solution is to disable ipv6 in your APNs(ALL OF THEM) to fix the APN with DUN I use this after disabling selinux temporarily until change is made.....
Post #8
https://forum.xda-developers.com/pixel-xl/help/android-8-1-how-to-edit-cellular-apn-t3697425
There is also a way to DROP ipv6 packets via ip6tables, which I will get down on this device after I get a handle on this A/B slot sh** we get to deal with(I just bricked the thing and got it back with blank-flash) APN/TTL thing is working for me, also it's not device specific. I have a script I put together on the E5 Play(working on the g7 power as well) that repeats xfinitywifi(or any other wifi) as a softap/hotspot to other devices without a MAC address registered on xfinity, no cellular connection at all. Could come in handy as this specific tethering trick evolves, I have an arsenal of other resources as well. Please don't hesitate to ask if you think I could help in any way...
ipv6 DROP info, what became of droidwall if i'm not mistaken. AFWALL has a feature that reduces to a small script left in Magisk's service.d directory.
https://github.com/ukanth/afwall/wiki/CustomScripts
example:
# Deny IPv6 only connections
$IP6TABLES -P INPUT DROP
$IP6TABLES -P FORWARD DROP
$IP6TABLES -P OUTPUT DROP
Click to expand...
Click to collapse
What's the script you use to use your Moto to repeat xfinitywifi? There's about a thousand of those hotspots near my house and I've been looking for a way to use them. I was registering for the free one hour trial every hour for a while but that got exhausting real quick.