Develop Bugs

Is anyone able to get android-wifi-tether to work on LG2?

I just rooted (teamepic cwm+root.zip) and installed the android wifi tether. Wifi tether is not working. I went to the QBKing thread in development, and see that others are having similar wifi tether problems. Does anyone have wifi tether working on an LG2 release? I am considering flashing back to a stock LF9 if sprint managed to bork the wifi tether with their latest release.
TIA.

works for me
No problems for me on LG2. What exactly is the problem?

billard412 said:
No problems for me on LG2. What exactly is the problem?
Click to expand...
Click to collapse
After my laptop connects to the tether, I can't actually get out to the internet. It's like the NAT is not working. checking the IP stack on my laptop, I am getting the right ip address, gatway, etc assigned. Wifi tether shows the laptop connected. But I can't do anything.
I followed the QBKING video step by step (except using a different password for encryption). I have the Samsung Galaxy Nexus (LTE/CDMA) profile selected. I've tried some others in desperation, but none are working.
I think I'll try uninstall/reinstall of wifi tether, or maybe just use foxfi now that i am rooted.

go to settings of the wifi tether app if you havent already and set it to enable the security settings so that youll need a password on any device you enable to use your phones internet signal and that should work because i was having that problem with the wifi tether app on my evo 3d and when i enabled security protection that allowed additional devices to connect to the internet. on my galaxy s3 i havent had any problems like that cause i intiially started with this method and ive been up and running just fine and im in houston so it seems the 4g lte is up and running here cause my phone shows 4g at the top for signal and my pages load up on the phones web searches faster than when its connected to my uverse wireless modem. hope this helps you man.
Sleestax said:
After my laptop connects to the tether, I can't actually get out to the internet. It's like the NAT is not working. checking the IP stack on my laptop, I am getting the right ip address, gatway, etc assigned. Wifi tether shows the laptop connected. But I can't do anything.
I followed the QBKING video step by step (except using a different password for encryption). I have the Samsung Galaxy Nexus (LTE/CDMA) profile selected. I've tried some others in desperation, but none are working.
I think I'll try uninstall/reinstall of wifi tether, or maybe just use foxfi now that i am rooted.
Click to expand...
Click to collapse

Sleestax said:
After my laptop connects to the tether, I can't actually get out to the internet. It's like the NAT is not working. checking the IP stack on my laptop, I am getting the right ip address, gatway, etc assigned. Wifi tether shows the laptop connected. But I can't do anything.
I followed the QBKING video step by step (except using a different password for encryption). I have the Samsung Galaxy Nexus (LTE/CDMA) profile selected. I've tried some others in desperation, but none are working.
I think I'll try uninstall/reinstall of wifi tether, or maybe just use foxfi now that i am rooted.
Click to expand...
Click to collapse
Ok if you didn't already, try gnex gsm instead. Also does the tether app show any numbers moving or do they stay at 0.0. Make sure your version of the tether app is up to date as well. And disable wake lock is unchecked in settings

I had the same issues as the op. With wireless tether change profile to galaxy nexus gsm not cdma and you must use access control. Then you should PROFIT......

Sleestax said:
I just rooted (teamepic cwm+root.zip) and installed the android wifi tether. Wifi tether is not working. I went to the QBKing thread in development, and see that others are having similar wifi tether problems. Does anyone have wifi tether working on an LG2 release? I am considering flashing back to a stock LF9 if sprint managed to bork the wifi tether with their latest release.
TIA.
Click to expand...
Click to collapse
Are you using the "WiFi for Rooted Users" app? If so be sure to change your Device-Profile.
Open App>Settings>Change Device-Profile> Select Samsung Galaxy Nexus (CDMA/LTE)

solo_element said:
Are you using the "WiFi for Rooted Users" app? If so be sure to change your Device-Profile.
Open App>Settings>Change Device-Profile> Select Samsung Galaxy Nexus (CDMA/LTE)
Click to expand...
Click to collapse
Galaxy nexus Cdma profile would not work for me i had to use galaxy nexus gsm profile for it to work for me.

Need Help!
Not working for me on the latest LG8 update...
HELP will someone please post a step by step of what you have done to get it working without any errors I've tried all steps without any success.
Thanks in advance

1afly said:
Not working for me on the latest LG8 update...
HELP will someone please post a step by step of what you have done to get it working without any errors I've tried all steps without any success. Thanks in advance
Click to expand...
Click to collapse
If your using wireless tether go to profile change to galaxy nexus gsm then enable access control and routing fix checked then you should be good.

jbadboy2007 said:
Then you should PROFIT......
Click to expand...
Click to collapse
Ok, am I the only one who doesn't know what this means? I see the term PROFIT used a lot here but I cannot figure out its definition or context. Could someone explain it to me?
Thanks.

jbadboy2007 said:
If your using wireless tether go to profile change to galaxy nexus gsm then enable access control and routing fix checked then you should be good.
Click to expand...
Click to collapse
Has anyone had a chance to try this? Did it fix the intermittent connection problems? I am going to try it later, because wifi tether is still not working for me (LG8) using Galaxy Nexus CDMA/LTE and with the access control disabled. I am just curious to see if anyone has this working as using the GSM profile is counter-intuitive for Sprint.

Sleestax said:
Has anyone had a chance to try this? Did it fix the intermittent connection problems? I am going to try it later, because wifi tether is still not working for me (LG8) using Galaxy Nexus CDMA/LTE and with the access control disabled. I am just curious to see if anyone has this working as using the GSM profile is counter-intuitive for Sprint.
Click to expand...
Click to collapse
Lol im using the gsm profile thats the only one that works for me.

jbadboy2007 said:
Lol im using the gsm profile thats the only one that works for me.
Click to expand...
Click to collapse
I tried it and the wifi tether still doesn't work. Half the time I start it, it requests Superuser and "starts" but there is no SSID being broadcast and I don't think the wifi radio is actually turned on. Every once in a while, it will broadcast the SSID, and I can connect but the up/down data stay at 0.00kb. Other times, I can connect, and I see the up/down data slowly incrementing, but I can't actually get out to the internet (or FTP, or telnet or....).
I guess I'm just fooked until foxfi or android wifi tether for root actually release a specifically-supported SGS3 version of their apps.

My issues were i could see the ap but not fully connect or allow internet access. Make sure your using access control it will not work with out it. Also make sure you have routing fix checked and use auto not ad hoc.

Sleestax said:
I just rooted (teamepic cwm+root.zip) and installed the android wifi tether. Wifi tether is not working. I went to the QBKing thread in development, and see that others are having similar wifi tether problems. Does anyone have wifi tether working on an LG2 release? I am considering flashing back to a stock LF9 if sprint managed to bork the wifi tether with their latest release.
TIA.
Click to expand...
Click to collapse
I only had issue with this on LG2, but really I have none on LG8 and FreeGS3 ver 0.0.9

jbadboy2007 said:
My issues were i could see the ap but not fully connect or allow internet access. Make sure your using access control it will not work with out it. Also make sure you have routing fix checked and use auto not ad hoc.
Click to expand...
Click to collapse
Thanks. I tried all that and still no luck. I'm on stock LG8 with root.

Sleestax said:
Thanks. I tried all that and still no luck. I'm on stock LG8 with root.
Click to expand...
Click to collapse
+1
HELP!!!

I got it to work by changing the device profile to Epic Touch 4g...tether all the time with it.
Sent from my Transformer Prime TF201

NeroDan said:
I got it to work by changing the device profile to Epic Touch 4g...tether all the time with it.
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
I'll give that a try, thanks.
*edit* I'm starting to wonder if this is an LTE-related thing. After a bit of testing, it seems like the tether works ok if I am on a 3G connection, but when I'm on LTE is when it won't work.

AT&T: Tethering not working after upgrading to ICS +root +LTE

I have successfully followed the process to root my phone and am currently on ICS with root and LTE. All features are working very well with the exception of tethering. I have tried the built in tethering plus a number of tethering apps (Barnacle, Android Tether) and all suffer from the same problem. My phone can connect but I never get a public IP address. I am able to use PDANet but that is my preferred options. Anyone else suffering from this same issue?

Did you flash the .111 baseband only ? ATT stock baseband doesn't work for tethering.
Sent from my LT28h using Tapatalk 2

I just now actually tested tethering and it worked for me. One problem is I had to choose WPA2 security and create a password in the hotspot settings, my laptop would not connect with out it. Even though I had it unsecured Windows kept asking for the password. I changed the hotspot security to WPA2, added a password and used that password on my laptop to connect, all worked from that point.

accts said:
Did you flash the .111 baseband only ? ATT stock baseband doesn't work for tethering.
Sent from my LT28h using Tapatalk 2
Click to expand...
Click to collapse
Yes, flashed the .111 baseband. In fact started the root process by using .111 and wiped everything. No AT&T firmware or firmware components on the phone.

davtfor said:
Yes, flashed the .111 baseband. In fact started the root process by using .111 and wiped everything. No AT&T firmware or firmware components on the phone.
Click to expand...
Click to collapse
So you can't get hotspot to even turn on? If can get it to turn but can't get a device to connect try setting the security up, that worked for me....at least on my laptop.

jeriku said:
So you can't get hotspot to even turn on? If can get it to turn but can't get a device to connect try setting the security up, that worked for me....at least on my laptop.
Click to expand...
Click to collapse
Hotspot turns on, computer connects but I never get a public IP only a private IP. Same thing happens with USB.

davtfor said:
Hotspot turns on, computer connects but I never get a public IP only a private IP. Same thing happens with USB.
Click to expand...
Click to collapse
Thats what it is supposed to do. The phone has the public ip address and any device behind the phone gets a private ip address. The phone is acting as the router.

Spectre51 said:
Thats what it is supposed to do. The phone has the public ip address and any device behind the phone gets a private ip address. The phone is acting as the router.
Click to expand...
Click to collapse
Let me clarify. I fully understand how the phone acts as a router. The problem is any device I tether to the phone gets assigned a 169 IP address which is an invalid private IP address. It should be assigned a 192 IP address. This happens with every app that I have used with the exception of PDANet and that makes sense since it is running through its own modem adapter.

davtfor said:
Let me clarify. I fully understand how the phone acts as a router. The problem is any device I tether to the phone gets assigned a 169 IP address which is an invalid private IP address. It should be assigned a 192 IP address. This happens with every app that I have used with the exception of PDANet and that makes sense since it is running through its own modem adapter.
Click to expand...
Click to collapse
Have you tried a dhcp lease renew? Also did you setup the wifi hotspot with a password or open? I've had no issues with mine. Set a password for WPA and it runs fine. Tested with my macbook pro.

How do you have ics on att phone?

Spectre51 said:
Have you tried a dhcp lease renew? Also did you setup the wifi hotspot with a password or open? I've had no issues with mine. Set a password for WPA and it runs fine. Tested with my macbook pro.
Click to expand...
Click to collapse
Tried lease renew many times, no success. Tried open + multiple secure protocols. Wireless and USB. Could it possibly by APN settings? Can you share yours?

ace5987 said:
How do you have ics on att phone?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1814487

This works on att phone? Sorry im just making sure since to my understanding the att phone is locked and cannot be hacked right now?! so im surprised that not a lot of people are doing this already!

Locked doesn't mean unrootable, and the.233 Chinese ICS ftf is a real firmware release not a cooked Rom. So we have root and ICS not much else yet.....
Sent from Rooted LT28at with ICS.

davtfor said:
Tried lease renew many times, no success. Tried open + multiple secure protocols. Wireless and USB. Could it possibly by APN settings? Can you share yours?
Click to expand...
Click to collapse
I am using the stock AT&T apn settings. You can find those here: http://forum.xda-developers.com/showthread.php?t=1770813&highlight=att

Identical settings. Doesn't make sense how one phone works and another with the same setup does not.
Sent from my LT28h using xda app-developers app

ok can any tell me how can I get the tethering and portable hotspot feature onto my ion from att. its rooted and has ICS but I have no Tethering or Portable Hotspot feature within my settings? Please help

jostin01 said:
ok can any tell me how can I get the tethering and portable hotspot feature onto my ion from att. its rooted and has ICS but I have no Tethering or Portable Hotspot feature within my settings? Please help
Click to expand...
Click to collapse
That's because you used the AT&T baseband. You need the LT28i baseband. Just flash the international firmware baseband only.
Sent from my Sony Xperia™ ion.

but I followed the exact steps in the method for rooting it so does that mean I have to flash back to LT28i GB and then go to ICS root and do the same LT28i baseband to get the LTE back cause I do have LTE just not the Tethering and Hotspot settings. Because I mentioned before its rooted, has ics and has LTE but no Tethering or Portable Hotspot setting in sight at all within my ion's settings

jostin01 said:
but I followed the exact steps in the method for rooting it so does that mean I have to flash back to LT28i GB and then go to ICS root and do the same LT28i baseband to get the LTE back cause I do have LTE just not the Tethering and Hotspot settings. Because I mentioned before its rooted, has ics and has LTE but no Tethering or Portable Hotspot setting in sight at all within my ion's settings
Click to expand...
Click to collapse
Yes start with the LT28i firmware for the rooting and upgrade process. Do not start with the LT28at if you want tethering cause it might work but might not. Seems like there is something that just doesn't work right when going from LT28at to ICS even if you flash the LT28i baseband, The tethering is there just not seeing the settings for it.

[Q] WiFi Tether enable or working app?

Hey all,
Does anyone have a wifi tethering app suggestion? or specific settings to set on a particular app to get wifi tethering working?
I'm rooted using MotoChopper. I tried WiFi Tether for Root Users and I can get the app to start just fine but my the network doesn't appear to be broadcasting as I can't see it on any other devices.
I can't use the built in hotspot feature because it's not enabled on my plan.
I understand it's early in the development stages for the SGS4 but just seeing if anyone has a workaround for the time being.
Thanks,
n64kps

n64kps said:
Hey all,
Does anyone have a wifi tethering app suggestion? or specific settings to set on a particular app to get wifi tethering working?
I'm rooted using MotoChopper. I tried WiFi Tether for Root Users and I can get the app to start just fine but my the network doesn't appear to be broadcasting as I can't see it on any other devices.
I can't use the built in hotspot feature because it's not enabled on my plan.
I understand it's early in the development stages for the SGS4 but just seeing if anyone has a workaround for the time being.
Thanks,
n64kps
Click to expand...
Click to collapse
Some strings need to be edited in the framework to change where the traffic get directed to so T-Mobile doesn't see you are tethering. Then you will be able to use the native app/toggle.

n64kps said:
Hey all,
Does anyone have a wifi tethering app suggestion? or specific settings to set on a particular app to get wifi tethering working?
I'm rooted using MotoChopper. I tried WiFi Tether for Root Users and I can get the app to start just fine but my the network doesn't appear to be broadcasting as I can't see it on any other devices.
I can't use the built in hotspot feature because it's not enabled on my plan.
I understand it's early in the development stages for the SGS4 but just seeing if anyone has a workaround for the time being.
Thanks,
n64kps
Click to expand...
Click to collapse
+1 - also hunting this feature - no foriegn devices on the network at the office, so tethering is my only option to get me some sweet sweet data to my laptop

or if u cant wait u can try this http://forum.xda-developers.com/showthread.php?t=2063043

XeoNoX said:
or if u cant wait u can try this http://forum.xda-developers.com/showthread.php?t=2063043
Click to expand...
Click to collapse
any simple app suggestion?

Do you need "wifi" tethering?
If not, PDAnet for me via bluetooth and usb.

plexwang said:
any simple app suggestion?
Click to expand...
Click to collapse
according to the OP in the following post this works http://forum.xda-developers.com/showthread.php?t=2266007&highlight=tether

try foxfi: http://foxfi.com

+1 for Foxfi, i have paid version and its good to go

nismo35 said:
+1 for Foxfi, i have paid version and its good to go
Click to expand...
Click to collapse
does it provide free tethering? or are you on a tethering data plan?

Is it possible to redirect all tethered traffic through a VPN and therefore circumvent t-mobiles tether detection?
E.g. set up an SSH tunnel with port forwarding on the phone and then set your phone as a proxy server on your PC?
Or, if t-mobile only uses user-agent detection, can you simply use a VPN directly from your PC? As all traffic is then encrypted, t-mobile should no longer be able to identify its origin.

im on my unlimited plan, and the free version is limited to a small bandwidth limit. 8 bucks for the full version and no additional fees.

VPN issues?

I'm not so sure its just my VPN provider anymore. I've tried a few different apps and I get the same issues.
I'm currently with Private Internet Access (PIA) and I've tried both their app and OpenVPN and sometimes it will connect on LTE but I get no active data transfer.
I have reason to believe its because g3 doesn't do ipv4 anymore? But that doesn't make much sense as OpenVPN works over ipv6 supposedly. Is this an issue with my provider or the g3? I can't seem to figure it out. Anybody else having VPN issues? Please post results.
I am aware I can use native VPN feature but I don't like that I can't use a knock code for credentials.

This thread might be of help for you in regards to getting VPN to work: T-Mobile D851 IPV4 Support
The two main posters in there are trying to get IPV4 to work on the G3, as one of them, The Pagel, was trying to get it to work for their own VPN apps.

Naturesretard said:
I'm not so sure its just my VPN provider anymore. I've tried a few different apps and I get the same issues.
I'm currently with Private Internet Access (PIA) and I've tried both their app and OpenVPN and sometimes it will connect on LTE but I get no active data transfer.
I have reason to believe its because g3 doesn't do ipv4 anymore? But that doesn't make much sense as OpenVPN works over ipv6 supposedly. Is this an issue with my provider or the g3? I can't seem to figure it out. Anybody else having VPN issues? Please post results.
I am aware I can use native VPN feature but I don't like that I can't use a knock code for credentials.
Click to expand...
Click to collapse
The issue is probably that you are getting a private IPv4 address from the provider, as well as a public IPv6 address (LTE areas only).
Most companies are still running VPNs on IPv4, and some VPNs won't play well with certain NAT implementations, which is used when you have a private IP address.
When you disable 4G and eHRPD, you will start getting a public IPv4 address again.
As you may have heard, we are running out of IPv4 addresses, and provider using NAT and Private IP addresses is a work around until more people deploy IPv6. Once your company deploys a VPN on IPv6, things should improve. However, this could take a while as this is a major transition and in some cases will require software/firmware updates on network equipment. Also, some very old operating systems don't always support IPv6, so all of that has to be retired as well.

Anyone know of a VPN service that runs IPv6 that would work on android? PIA doesn't work at all

I ran that patch from the other post, and no luck. Not a single VPN connection works on this phone. I am debating if I should take it back, as a VPN is a necessity to me

Did you mess around with your vpn settings at all maybe you should uninstall then re install? Pia is working fine for me with ipv4 in fact I am posting right now from my g3 on the vpn.

ThePagel said:
Did you mess around with your vpn settings at all maybe you should uninstall then re install? Pia is working fine for me with ipv4 in fact I am posting right now from my g3 on the vpn.
Click to expand...
Click to collapse
Using the VPN script?

Naturesretard said:
Using the VPN script?
Click to expand...
Click to collapse
No script just make sure your on ipv4 not ipv4/ipv6 I think the script your referring to is for tether unless there is a script I haven't seen yet.

ThePagel said:
No script just make sure your on ipv4 not ipv4/ipv6 I think the script your referring to is for tether unless there is a script I haven't seen yet.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2838484
This is the only thing I've found relating to vpns and trying to get ipv4 on the g3.
How did you get it working?

Naturesretard said:
http://forum.xda-developers.com/showthread.php?t=2838484
This is the only thing I've found relating to vpns and trying to get ipv4 on the g3.
How did you get it working?
Click to expand...
Click to collapse
Its not a script and I made that :silly:

ThePagel said:
Its not a script and I made that :silly:
Click to expand...
Click to collapse
Anything one flashes I consider a script. Wrong terminology I suppose. Also didn't notice you were posting in my thread....hai!
I take it you're mod works fine now?
I've thought of flashing it as I now live in an area where 3g and hspa could come it handy as I get either LTE, edge, or nothing now, mainly nothing.
I'm doing a bit of traveling atm so I can't peruse the pages, but how's it coming along? I could care less about native tether, there's apps to do it. As long as i t doesnt mess up my xposed tweaks I'm 3 seconds from flashing it....

Naturesretard said:
Anything one flashes I consider a script. Wrong terminology I suppose. Also didn't notice you were posting in my thread....hai!
I take it you're mod works fine now?
I've thought of flashing it as I now live in an area where 3g and hspa could come it handy as I get either LTE, edge, or nothing now, mainly nothing.
I'm doing a bit of traveling atm so I can't peruse the pages, but how's it coming along? I could care less about native tether, there's apps to do it. As long as i t doesnt mess up my xposed tweaks I'm 3 seconds from flashing it....
Click to expand...
Click to collapse
Yeah native tether still doesn't work but everything else does. A few people have had problems but not many. I would suggest you make a backup before you do it because xposed is kind of a jealous lover and hates when you eye other modifications. But on the other hand it really depends on what xposed modules your using.

ThePagel said:
Yeah native tether still doesn't work but everything else does. A few people have had problems but not many. I would suggest you make a backup before you do it because xposed is kind of a jealous lover and hates when you eye other modifications. But on the other hand it really depends on what xposed modules your using.
Click to expand...
Click to collapse
Just g3 tweaks. I wasn't sure if I could use normal xposed tweaks. I'll have to make a new backup with my xposed and I'll give it a shot. PIA working on WiFi still with the mod?

Naturesretard said:
Just g3 tweaks. I wasn't sure if I could use normal xposed tweaks. I'll have to make a new backup with my xposed and I'll give it a shot. PIA working on WiFi still with the mod?
Click to expand...
Click to collapse
Probably not but I will check
*edit
Wait still? Does it work now? Haven't tried to find out.

I think it's something with LG's android build. When i had my Moto X I could use PIA on LTE. I did not check to see if it kicked itself to IPv4 but that seems to be the problem. It works if you have the EPC T-Mobile APN set to IPv4 and connect through HSPA+.

derpyderps said:
I think it's something with LG's android build. When i had my Moto X I could use PIA on LTE. I did not check to see if it kicked itself to IPv4 but that seems to be the problem. It works if you have the EPC T-Mobile APN set to IPv4 and connect through HSPA+.
Click to expand...
Click to collapse
ipv4 is definitely locked down for fast on this tmobile version but it is luckily a easy work around if you don't mind loosing built in tether. I have confidence that built in tether will be fixed for that mod soon but I am currently using my phone tinkering time (limited atm) on a korean port that wont require any modifications. Before I stop caring about tmobile builds ill fix it. Something I am sure a lot of people might find interesting is after my first boot on the korean port it is looking like I might be able to bring voice over lte to our phone before it officially happens.

Unsure if related to the mod, but attempting to access tmo account via tmo app yields a server error
Since applying the mod

Naturesretard said:
Unsure if related to the mod, but attempting to access tmo account via tmo app yields a server error
Since applying the mod
Click to expand...
Click to collapse
ooooo that's something I didn't check gimme a couple minutes.
Update: works for me

[Q] working tether nonrooted or not?

.. Okay so will somebody finally answer the question if any tether apps are working without root for the G4?

My T-Mobile phone came with a tethering app that works great. I haven't tried any from the play store like FoxFi because I haven't had a need.

Anybody else?

iiEatTurdz said:
Anybody else?
Click to expand...
Click to collapse
Try this, no promises. You'd need a FoxFi paid version or PDANet to utilize USB tethering.
Create IPv4 APN and add ,dun to the APN type. Then use PDANet with the hide tether usage option enabled. I think I've managed to get it working for myself last night.

snoz0r said:
Try this, no promises. You'd need a FoxFi paid version or PDANet to utilize USB tethering.
Create IPv4 APN and add ,dun to the APN type. Then use PDANet with the hide tether usage option enabled. I think I've managed to get it working for myself last night.
Click to expand...
Click to collapse
And that's usb only or wireless too?

iiEatTurdz said:
And that's usb only or wireless too?
Click to expand...
Click to collapse
USB only

snoz0r said:
Try this, no promises. You'd need a FoxFi paid version or PDANet to utilize USB tethering.
Create IPv4 APN and add ,dun to the APN type. Then use PDANet with the hide tether usage option enabled. I think I've managed to get it working for myself last night.
Click to expand...
Click to collapse
Do you know how to connect internet from pc to ps3 without ethernet? Not a network bridge?

iiEatTurdz said:
Do you know how to connect internet from pc to ps3 without ethernet? Not a network bridge?
Click to expand...
Click to collapse
I know some routers can treat your phone as a USB modem, but I don't have one at home nor have I tried before. I know it's possible though.

snoz0r said:
I know some routers can treat your phone as a USB modem, but I don't have one at home nor have I tried before. I know it's possible though.
Click to expand...
Click to collapse
Hmm thanks bro

Has anyone gotten foxfi to work with G4 (usb)? I have the paid version...it connects but a popup shows DNS 1,1 or something like that and no sites will load. It works flawlessly with my Note 4. I

jutaejrtouch said:
Has anyone gotten foxfi to work with G4 (usb)? I have the paid version...it connects but a popup shows DNS 1,1 or something like that and no sites will load. It works flawlessly with my Note 4. I
Click to expand...
Click to collapse
Try turning off the use Google DNS setting.
Sent from my LG-H811 using Tapatalk

snoz0r said:
Try turning off the use Google DNS setting.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
I figured it out before I had a chance to post back....but thanks dude!!