HTC M4 stuck at cyanogenMod splash screen - Upgrading, Modifying and Unlocking

I successfully rooted my htc one mini and installed CM11, eventually I dont know what happened and I tried to install Stock ROM.
for this, first I install the stock recovery and then I passes the command "fastboot oem lock"
After that I tried installing stock ROM but it fails, Now I am stuck in bootloader and can not go back to CM11 nor installing stock ROM. currently I am getting ****RELOCKED***. I also tried unlocking it with the key provided by HTCDev.com but it didnt worked
C:\Downloads\Fastboot\Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.150s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.160s
Pleasssssseeee help

Related

EVO 3D unlocking help

when i get to the last step on htcdev.com to unlock the bootloader. i type "fastboot flash unlocktoken Unlock_code.bin" but when i got back to my phone i dont have the disclaimer to unlock the phone. im following directions correctly and everything says on computer that it went through. any ideas??
C:\android>fastboot flash unlocktoken unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.156s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ -0.000s]
finished. total time: 0.156s
i get this but nothing on my phone....
Same problem.
This is also happening to me. I unlocked my own Evo 3D with this method and had no problems, but ran into this same issue trying to unlock my son's, which he just got for Christmas. I've confirmed Hboot version is 1.5. Any help with this would be much appreciated.
*Update* Fixed!
I did some research and found the solution! I've confirmed that this works for me. Basically, you have to install the old RUU version 2.08.651.2 because something in 2.08.651.3 borks the HTC unlock. Here is the original post I found:
http://htcevohacks.com/htc-evo-3d-cheat-sheet/#comment-31513
...and here is a link to a thread with the RUU 2.08.651.2 download:
http://forum.xda-developers.com/showthread.php?t=1225737
OK this is not the answer but I can confirm that htc dev unlocking method is working perfectly for hboot 1.53.0007

[Q] Need help

I recently unlocked my tmobile mytouch 3g slide's bootloader with the htc method and i'm having trouble flashing a recovery with the command prompt fastboot thing. it has:
Code:
c:\Android>fastboot flash recovery recovery.img
sending 'recovery' (4528 KB)...
OKAY [ 0.971s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 0.976s
I've seen people before who have unlocked the bootloader with the htc method do this but did not get the error. Any help would be great thanks.
Update: I'm sorry for being stupid, haha, i found out that the recovery img wasn't compatible with my phone

Can you please help me?

Hello here is my problem.
I run my HOX on hboot 1.39 and the latest CMW but i cant enter it from bootloader i get the Red triangle and power+volume up just reboots the phone again. I took factory reset in bootloader the phone loads normal but after i unlock the lock screen i get white backround with HTC text. I dont know what to do can you give me some advices?
Reflash the custom CWM recovery or TWRP recovery
Fastboot flash recovery name-of-recovery.img
Fastboot erase cache
C:\Users\Simon\Desktop\htc one x cyanogenmod>fastboot devices
HT23WW136148 fastboot
C:\Users\Simon\Desktop\htc one x cyanogenmod>fastboot flash recovery openrecover
y-twrp-2.3.1.0-endeavoru.img
sending 'recovery' (6470 KB)...
OKAY [ 0.831s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.043s
It fails everytime i try to flast new/same recovery, and i still get the red trianle. Now phone works normal when i took factory reset in bootloader but the signal and wifi doesnt work.
Is the bootloader unlocked?
Sent from my One X using xda premium
I bet its locked
Its says that bootloader is relocked. And then i tried to get the new unlock code, but when i try to get the token it say command error.
Fastboot flash unlocktoken unlock_code.bin
OKAY [ 0.126s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Unknown error))
finished. total time: 49.707s
Check successfully.....did you see on the phones screen the option to unlock the bootloader ?
Yes, thank you so much for your help! :victory:
Good ... now you can continue

just wanted to update hboot

hey guys i just wanted to update hboot and now im stuck -.-
im german and my english is not the best...sry for that
but i hope one of you guys is able to help me with my phone:good:
phone is a One X brandet O2 ger
Cid is O2___102
Hboot is 0.94
radio 1.1204.90.13
i had a venom rom viper x (from oct 2012)
i wanted to update hboot and there was a step which said relock the device. yeah that was done no prob..
now i´ve a locked device (but i´ve got the unlock token from htc)
how to use that? already tried to put that into my phone via fastboot but there comes a error message
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.224s
Click to expand...
Click to collapse
i think im not able to figure that out without any help
first i think to unlock the device again and after that just update hboot and then flash cm 10.1
thx for your help
To upgrade your Hboot... You first need to lock your device and then flash the firmware.zip!
After than unlock your device and then flash custom recovery and then install CM10.1
Post the result of the following code:
Code:
fastboot getvar version-main
If there's a RUU for your device, then you can go back to stock and then update to JB via OTA update if you want..?!
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.224s
Click to expand...
Click to collapse
Generate a new unlock_code.bin file from htcdev.com and then try again!
vin4yak said:
To upgrade your Hboot... You first need to lock your device and then flash the firmware.zip!
After than unlock your device and then flash custom recovery and then install CM10.1
Post the result of the following code:
Code:
fastboot getvar version-main
If there's a RUU for your device, then you can go back to stock and then update to JB via OTA update if you want..?!
Generate a new unlock_code.bin file from htcdev.com and then try again!
Click to expand...
Click to collapse
+1 .. Here's the firmware thread >> http://forum.xda-developers.com/showthread.php?t=1957376 <<

TWRP problem, fastboot boot -> unknown command

Hi !
I'm trying to install the custom recovery TWRP on my LG G4, the "fastboot flash recovery (file)" command works :
Sending 'recovery' (6002 KB) OKAY [ 0.166s]
Writing 'recovery' OKAY [ 0.067s]
Finished. Total time: 0.292s
But then the "fastboot boot (file)" command doesn't ! It says :
Sending 'boot.img' (6002 KB) OKAY [ 0.144s]
Booting FAILED (remote: 'unknown command')
By the way when I try to enter into recovery mod using the power+volume down method it asks If I want to do a factory reset, If I say yes it does it, if I say no it just boot normally, no recovery mod.
By bootloader is unlocked, I checked using the "fastboot getvar unlocked" command, and I have the "your device software cannot be checked for corruption, lock the bootloader" screen.
Do you guys know what's the problem ?
Read the official TWRP thread (also linked in my signature)
Sent from my OnePlus 6T using XDA Labs
Thank you for your help, I managed to make it work

Categories

Resources