I recently flashed my LG F180L to KK E975 and I rooted it successfully. Now, the only issue I have is how to flash baseband for KK. My LGOG does not have any signal up till now. I tried the same baseband flashing method like what I did last time on Jellybean but it doesn't seem to work on KK. Any suggestions?
Related
Okay, silly question to some. But I have a E988 and installed CM 10.2, but now I can't get the networks I once had before.
Is it safe to flash a different modem besides the E988 modem? Because that hasn't worked for me.
Can anyone please tell me which version of Freegee should I used to unlock the bootloader of my E975 converted from F180L?
I have already converted my F180L to E975 HK, rooted, and then flashed F180L baseband.
Also, do I need to revert the baseband before unlocking ?
ironfist47 said:
Can anyone please tell me which version of Freegee should I used to unlock the bootloader of my E975 converted from F180L?
I have already converted my F180L to E975 HK, rooted, and then flashed F180L baseband.
Also, do I need to revert the baseband before unlocking ?
Click to expand...
Click to collapse
Have you tried freegee from play store?
How did you flashed your F180L baseband?
I m currently using Lg G2 LS-980 in India, I m still on 4.2.2 ( ZV8 ) stock rooted Rom. i have rooted for unlocking purpose only.
I have tested that after i updated to ZVA via ota i having problems with network fluctuations on cdma ruim so i downgraded back to ZV8 and now no problems. I want to ask if its possible to flash ZV8 radio if i update to Stock Kitkat Rom.
I see mention of ZV8, ZVA, ZVC, and ZVD. It has me all a little confused. Are these the modems? Or the basebands?
How can I find out which version I have? When I go to software information on my phone (running CloudyPro II 2.3), it lists a baseband of M8974A-AAAAANAZM-2.0.20046.
I'm basically trying to understand what the ZV8, ZVA, ZVC, and ZVD refer to exactly and how to tell which one I have. Also, is there any reason to have one over the other?
Thanks!
they are software versions. Each sofware version has its own baseband (referenced by the sofware version). zv7 was the first, then ZV8 (neither of these had tri-band enabled), then ZVA -TRI-BAND, then ZVC - (KIT KAT UPGRADE), AND NOW LATEST IS ZVD (KIT KAT PLUS KNOCK CODE)
The modems are not interchangeable as if you try to have kitkat but flash the zv8 modem, you will brick. Each software version you flash must match the modem (flashed in SAME recovery session, or your sol )
currently it looks like you have the ZVD baseband or ZVC
Thank you for the reply!
Am I at risk of a permanent brick if I flash the wrong combination? Or would it just be something like a boot loop, forcing me to reboot into recovery and restore a backup?
The reason I ask about all this is I've had problems flashing other ROMs. Coming from CloudyPro II 2.3, if I flash CM11 or Affliction (or some other ROMs), I seem to get boot loops, and I just have to restore a backup.
So basically, I'm just trying to figure out what I'm doing wrong or what the best practice is to jump around to different ROMs with different basebands.
Thanks again!
I had a question.... You were able to find a cloudy Rom that works on Sprint?
Hi guys,
What happened :
I am using VS985 and have been using cyanogenmod(updating to latest nightlies - CM13) from the last few months .
Few days ago i couldn't update to latest nightly because of unknown baseband version. So i, stupidly enough, flashed 24B modem. And was able to update to latest nightly but LTE no longer worked. I figured i need to flash 35B modem. So i ended up flashing bootstack from xdabebb from this link
No luck with LTE reception.
What have i tried till now:
I've tried doing clean installs. Also tried flashing an older 12.1 CM version. Have tried to change preferred netwrok through *#*#4636*#*# . Rebooting , flashing stuff again and again.
Checked APN setting and everything.
End Result:
LTE is not working. Have i messed up the radio?. Do i need to KDZ back to stock and then flash CM again?. Please help
Solved!
Writing this for anyone who might encounter the same problem.
I flashed kdz stock 10B, root and flashed TWRP and flashed CM13 again.
Everything is new and fine again
LTE working and everything.
How did you do that
ranaAz said:
Solved!
Writing this for anyone who might encounter the same problem.
I flashed kdz stock 10B, root and flashed TWRP and flashed CM13 again.
Everything is new and fine again
LTE working and everything.
Click to expand...
Click to collapse
How did you flash CM13 from stock 10B, i couldn't do it, i had a baseband error, i need at least 24B, how do you do that?