Develop Bugs

jikantaru XE rom

when i try to install apps i get insufficent storage but i go in settings and it says i have like 700Mb left stil

Try Re-Flashing it. Make sure you partitioned the SD card correctly, ext3 or 4 will work.
wipe data, cache, and Dalvik. after you flash it, don't reboot install Jikantarus data2sd with app2sd remover via recovery then reboot.

Application Not Installed
Dear Devz
I dont face any insufficient problem during apps installation, but for the most of installation, it says apps not installed those were no problem when using stock ROM.
Is this a problem with JIKANTARU XE ROM... ?
Please guide

cleansafi said:
Dear Devz
I dont face any insufficient problem during apps installation, but for the most of installation, it says apps not installed those were no problem when using stock ROM.
Is this a problem with JIKANTARU XE ROM... ?
Please guide
Click to expand...
Click to collapse
I had no problems with this be using rom for about a week and i fixed NY problem in this post also I recommend flashing jikantaru's oc kernal

But HOW
But how to do that

cleansafi said:
But how to do that
Click to expand...
Click to collapse
how to do what bit ?

Problem with Sandvold ROM ICS for Desire

Hi guys,
I have an other problem with this ROM. Sometimes when I turn off the screen the device locks, the only solution is remove the battery and turn off the Desire.
When the device locks I have or the screen totally black or the boot animation blocked and any commands don't work.
Someone have this problem or know the solution?? Thanks
Jerry

jerry_47 said:
Someone have this problem or know the solution?? Thanks
Jerry
Click to expand...
Click to collapse
Go back to using a stable rom and stop using a beta rom only to complain things doesn't work properly afterwards.

Go to recovery and do full wipe. Factory reset, cache and dalvik cache

jim2san said:
Go to recovery and do full wipe. Factory reset, cache and dalvik cache
Click to expand...
Click to collapse
then have to flash the ROM???

yes, reflash it, i have the same rom and it works just fine, wipe everything and you should be ok.

tabon said:
yes, reflash it, i have the same rom and it works just fine, wipe everything and you should be ok.
Click to expand...
Click to collapse
Ok, Thanks. I have another question for you about this ROM. The volume (ring and alarm) is very low, how can I increase it??

From sandvold site
"Volume is very low!
Have you used Amarullz or Darktremor A2SD? Although both methods uaually work well they have been shown to cause lots of FCs with this ROM. A alternative A2SD method is baked right into this ROM so you don't need another one. See the question above this one."
Also you can download via market "audiomanager"..
But propably its the a2sd

You use darktremor script ? Because when you move dalvik cache to sd your sound will be low
Sent from my HTC Desire

i use it too, but my sound its ok, it wasnt at 0.3.4, but now at 0.3.6 my problem is fixed

6moli666 said:
You use darktremor script ? Because when you move dalvik cache to sd your sound will be low
Sent from my HTC Desire
Click to expand...
Click to collapse
tabon said:
From sandvold site
"Volume is very low!
Have you used Amarullz or Darktremor A2SD? Although both methods uaually work well they have been shown to cause lots of FCs with this ROM. A alternative A2SD method is baked right into this ROM so you don't need another one. See the question above this one."
Also you can download via market "audiomanager"..
But propably its the a2sd
Click to expand...
Click to collapse
Yes i use Darktremor script. I flashed this script because the "native" app2sd script of the ROM doesn't work good.
I follow the guide of the ROM to install the script but after the reboot i have always the same problem, the problem is that every app that I install is copied to both internal memory and external partition, so the internal memory fills up quickly.
The sound is now ok.
I still have the problem that I wrote at the beginning of this discussion (freezing of the device) but it is less rare.

u have the latest version 0.3.6?

tabon said:
u have the latest version 0.3.6?
Click to expand...
Click to collapse
Yes (of the ROM)

did u upgraded? or its from a fresh installation ?
if its fresh, sorry i dont have anything else to say...
if its not..wipe data and format system..and do a clean install
gl

tabon said:
did u upgraded? or its from a fresh installation ?
if its fresh, sorry i dont have anything else to say...
if its not..wipe data and format system..and do a clean install
gl
Click to expand...
Click to collapse
I understand what you want to say but I did a clean install. I wiped all and then I installed the ROM....i suppose that is a problem of the beta version....I'm waiting for a stable version....Thanks anyway

anytime..
from mount menu(at recovery)
did u format system ? wipes are not enough

tabon said:
anytime..
from mount menu(at recovery)
did u format system ? wipes are not enough
Click to expand...
Click to collapse
No, actually i didn't format the system, i did only all wipe. I can do also the format .
So I can do this:
wipe chache
wipe dalvik cache
factory reset
format system
flash ROM
it's right???

do this
i did this and everything works fine
1. wipe data/factory reset
2. mounts and storage --> format system
u dont need to do anything else..these 2 options do all the other wipes and formats
3. install clean rom
tell me what happend

tabon said:
do this
i did this and everything works fine
1. wipe data/factory reset
2. mounts and storage --> format system
u dont need to do anything else..these 2 options do all the other wipes and formats
3. install clean rom
tell me what happend
Click to expand...
Click to collapse
unbelievable.....now the ROM doesn't freeze.....but i have again the problem of volume....

Gallery problems
Its a great ROM with a few expected problems being a beta. The problem I'm having is with the gallery. I can't access any of my albums.
I've tried Quick Pics but it doesn't find images stored online in G+ or Picasa albums.
Has anyone else come across this using a2sd?

sorry man, dont know what else to say..

Desire Stuck on boot with INT2EXT+

Hello,
I'm using JB AOKP by Vj and for space needed reasons I decided to try the int2ext+ script. It works only the first time I boot the phone, on the second time it stays stucked on the boot animation.
Thanks in advance.

Did you delete the old script first?

k3lcior said:
Did you delete the old script first?
Click to expand...
Click to collapse
I suppose yes, I made a full wipe (system, dalvik, sdext, etc tec). is it enough?

You wiped rom and then flashed a2sd script?
Sent from my HTC Desire using xda premium

k3lcior said:
You wiped rom and then flashed a2sd script?
Yes I did it. I first wiped everything, flashed the ROM, and then installled app2sd (int2ext+) script.
Click to expand...
Click to collapse

Davide Manca said:
I suppose yes, I made a full wipe (system, dalvik, sdext, etc tec). is it enough?
Click to expand...
Click to collapse
I dont think u did. Like k3lcior said u need to delete a2sd from the rom. So on ur computer, open the rom zip and go to system/etc/init.d folder and check if theres any a2sd script there, if so delete it. Also check system/bin. Then put rom on sdcard and in recovery, full wipe, wipe dalvik then flash rom then int2ext script then reboot.
Sent from my HTC Desire

My Desire is also stucking in the boot animation. I tried to use Int2Ext and some others, but there is no change. My rom is http://forum.xda-developers.com/showthread.php?t=2070704. It works for the first boot, but it won't work for the 2nd. I removed a2sd but it didn't change anything. What can i do?
Thanks

Gainer5 said:
My Desire is also stucking in the boot animation. I tried to use Int2Ext and some others, but there is no change. My rom is http://forum.xda-developers.com/showthread.php?t=2070704. It works for the first boot, but it won't work for the 2nd. I removed a2sd but it didn't change anything. What can i do?
Thanks
Click to expand...
Click to collapse
How did you partition your sd-card?

I had to primary partitions. My first is 6gb FAT32 and my second is 2gb Ext2.
I solved my problem. My solution:
1. Like mentioned above, remove a2sd from the int.d folder or how it's called
2. because it didn't reboot, I cleanded the dalvik cache with the clear dalvik cache zip by croniccorey which was made for the use with the script. you can find it here http://forum.xda-developers.com/showthread.php?t=1716124. it should fix the problem.

[Q] Play stopped working after install a2sd script!

Hi all!
I've installed this custom rom on my HTC Desire http://forum.xda-developers.com/showthread.php?t=1945441 and after I updated to a newer version folowing the instructions, including the a2sd script (i didnt use it before), my Google Play stopped working, everything else is OK!
Here is what i'v done:
1.) Wipe chace, wipe dalvik
2.) Installing zip from SD card
3.) Rebooting and enabling a2sd
4.) Install Gapps from SD card
And after I reboot last and start using the phone my Google Playe store stopped working when I try to install something from the store. Installing APKs via file manager is working.
Any suggestion or solution for my problem?
Thank you!

I think its
1. Full wipe + dalvik
2. Flash rom
3. Flash gapps
(Reboot)
Then the a2sd
Sent from my HTC Desire

jmcclue said:
I think its
1. Full wipe + dalvik
2. Flash rom
3. Flash gapps
(Reboot)
Then the a2sd
Sent from my HTC Desire
Click to expand...
Click to collapse
Can i run a2sd script again? Or i must remove it first before running again (how to do it if necessary?)?
I followed this method to enable it:
1. su
2. wait for root permission request
3. a2sd install
4. answer "y" (dalvik cache), "n" (data), "y" (reboot)

What recovery have u got?
Sent from my HTC Desire

jmcclue said:
What recovery have u got?
Sent from my HTC Desire
Click to expand...
Click to collapse
Revolutionary CWM v4.0.1.4
I dont know if a2sd script break my play store or something else...

Go here, to last post. Stankyou has posted latest playstore, download and install that n see if that works.
http://forum.xda-developers.com/showthread.php?t=1739295
If not then try reinstall rom.
Boot recovery then
Full wipe + wipe dalvik
Flash the rom
Flash gapps
Reboot
Open terminal emulator
su
a2sd install
y.n.y
Ur phone will reboot and that should be done.
Sent from my HTC Desire

jmcclue said:
Go here, to last post. Stankyou has posted latest playstore, download and install that n see if that works.
http://forum.xda-developers.com/showthread.php?t=1739295
If not then try reinstall rom.
Boot recovery then
Full wipe + wipe dalvik
Flash the rom
Flash gapps
Reboot
Open terminal emulator
su
a2sd install
y.n.y
Ur phone will reboot and that should be done.
Sent from my HTC Desire
Click to expand...
Click to collapse
I tried to reinstall the play store, but nothing happened, still closing...
I will make the full wipe and reinstall the rom. Dont know how can i get here, because i follow the method of the rom maker, and he said first enable the script then install gapps, if the source of a problem is this.
The full wipe will delete also the enabled a2sd script too?
Thank you for help!

tombabylon said:
I tried to reinstall the play store, but nothing happened, still closing...
I will make the full wipe and reinstall the rom. Dont know how can i get here, because i follow the method of the rom maker, and he said first enable the script then install gapps, if the source of a problem is this.
The full wipe will delete also the enabled a2sd script too?
Thank you for help!
Click to expand...
Click to collapse
Yh full wipe will delete a2sd. I dunno so, from what iv seen in every rom (ICS/JB etc) its always been-
Flash rom
Flash gapps
Reboot
Then activate a2sd in terminal emulator.
But if the dev says otherwise maybe u should post this problem in that thread or atleast look at other posts to see if others have this problem
Sent from my HTC Desire

jmcclue said:
Yh full wipe will delete a2sd. I dunno so, from what iv seen in every rom (ICS/JB etc) its always been-
Flash rom
Flash gapps
Reboot
Then activate a2sd in terminal emulator.
But if the dev says otherwise maybe u should post this problem in that thread or atleast look at other posts to see if others have this problem
Sent from my HTC Desire
Click to expand...
Click to collapse
Hello!
BIG, BIG THANKS for helping me out! With your method, after full wipe and reinstall my phone work like a charm with a2sd script!
I cant post my issue in the thread of the rom, because I'm a junior member for now.
Please if you can/want post my problem in the thread for preventing others to do the same way.
Thank you again! :good:

Glad its working
Sent from my HTC Desire

[Q] [Arc S] Installing any JB - same problem

I have a problem with the installation of JB. No matter what ROM I install, after boot, when home screen appear, my touch screen does not respond. I've tried a lot of roms and a lot of kernels. I have unlocked BL. In stock rom I have no problems.
What could be causing this? Should I format system before installing rom via recovery or just wipe data, cache and dalvik? When I should flash kernel? Before/after installing rom? I care about CM10. Plz help.
P.S. sorry for my english

saymonek said:
I have a problem with the installation of JB. No matter what ROM I install, after boot, when home screen appear, my touch screen does not respond. I've tried a lot of roms and a lot of kernels. I have unlocked BL. In stock rom I have no problems.
What could be causing this? Should I format system before installing rom via recovery or just wipe data, cache and dalvik? When I should flash kernel? Before/after installing rom? I care about CM10. Plz help.
P.S. sorry for my english
Click to expand...
Click to collapse
I have Neo,and this is how i'm installing it: first wipe everything (data,wipe cache and Dalvik cache),flash the rom,and then flash the kernel.

georgeiulian89 said:
I have Neo,and this is how i'm installing it: first wipe everything (data,wipe cache and Dalvik cache),flash the rom,and then flash the kernel.
Click to expand...
Click to collapse
I've tried to do that way but but not succeed

Certain ROMs require phone-specific patch, make sure you install it!
Other ROMs have different downloads for different phones, make sure to download correct one!
If you install wrong phone ROM, touch dies.

All question threads belong here in Q&A so please post in the correct sections going forward.
Thanks
AvRS

saymonek said:
I have a problem with the installation of JB. No matter what ROM I install, after boot, when home screen appear, my touch screen does not respond. I've tried a lot of roms and a lot of kernels. I have unlocked BL. In stock rom I have no problems.
What could be causing this? Should I format system before installing rom via recovery or just wipe data, cache and dalvik? When I should flash kernel? Before/after installing rom? I care about CM10. Plz help.
P.S. sorry for my english
Click to expand...
Click to collapse
The problem is caused by the kernal. You MUST have JB kernel to flash any JB ROM. Generally, for each ROM you will find the recommended kernel and the required steps. Do exactly like posted by OP.
As an example, see here: http://forum.xda-developers.com/showthread.php?t=1979829
You can make an idea on the steps to follow.

okty2k said:
The problem is caused by the kernal. You MUST have JB kernel to flash any JB ROM. Generally, for each ROM you will find the recommended kernel and the required steps. Do exactly like posted by OP.
As an example, see here: http://forum.xda-developers.com/showthread.php?t=1979829
You can make an idea on the steps to follow.
Click to expand...
Click to collapse
Ok, so now I have installed Xperia T rom (7.0.A.3.195 v6.0 for ARC/ARC-S). Should I flash V77 baseband, then flash kernel from CM10 FXP150 pack via fastboot, make a wipe (data, cache, dalvik) then install ROM via Recovery, and then install GAPPS and it should work? This is what i'm gonna do, so if I'm wrong please tell me.
EDIT:
(edited in case someone had same problem)
I found the solution:
I had to flash BB 72 and libs, then flash ROM+GAPPS and libs once again, then everything works awesome. (edited in case someone had same problem)

saymonek said:
(edited in case someone had same problem)
I found the solution:
I had to flash BB 72 and libs, then flash ROM+GAPPS and libs once again, then everything works awesome. (edited in case someone had same problem)
Click to expand...
Click to collapse
I'd got a touch screen problem.
Could you please tell me that how can i flash 'libs once again' So, I can try on my Arc.
Thank you very much.