Hi guys,
I have an other problem with this ROM. Sometimes when I turn off the screen the device locks, the only solution is remove the battery and turn off the Desire.
When the device locks I have or the screen totally black or the boot animation blocked and any commands don't work.
Someone have this problem or know the solution?? Thanks
Jerry
jerry_47 said:
Someone have this problem or know the solution?? Thanks
Jerry
Click to expand...
Click to collapse
Go back to using a stable rom and stop using a beta rom only to complain things doesn't work properly afterwards.
Go to recovery and do full wipe. Factory reset, cache and dalvik cache
jim2san said:
Go to recovery and do full wipe. Factory reset, cache and dalvik cache
Click to expand...
Click to collapse
then have to flash the ROM???
yes, reflash it, i have the same rom and it works just fine, wipe everything and you should be ok.
tabon said:
yes, reflash it, i have the same rom and it works just fine, wipe everything and you should be ok.
Click to expand...
Click to collapse
Ok, Thanks. I have another question for you about this ROM. The volume (ring and alarm) is very low, how can I increase it??
From sandvold site
"Volume is very low!
Have you used Amarullz or Darktremor A2SD? Although both methods uaually work well they have been shown to cause lots of FCs with this ROM. A alternative A2SD method is baked right into this ROM so you don't need another one. See the question above this one."
Also you can download via market "audiomanager"..
But propably its the a2sd
You use darktremor script ? Because when you move dalvik cache to sd your sound will be low
Sent from my HTC Desire
i use it too, but my sound its ok, it wasnt at 0.3.4, but now at 0.3.6 my problem is fixed
6moli666 said:
You use darktremor script ? Because when you move dalvik cache to sd your sound will be low
Sent from my HTC Desire
Click to expand...
Click to collapse
tabon said:
From sandvold site
"Volume is very low!
Have you used Amarullz or Darktremor A2SD? Although both methods uaually work well they have been shown to cause lots of FCs with this ROM. A alternative A2SD method is baked right into this ROM so you don't need another one. See the question above this one."
Also you can download via market "audiomanager"..
But propably its the a2sd
Click to expand...
Click to collapse
Yes i use Darktremor script. I flashed this script because the "native" app2sd script of the ROM doesn't work good.
I follow the guide of the ROM to install the script but after the reboot i have always the same problem, the problem is that every app that I install is copied to both internal memory and external partition, so the internal memory fills up quickly.
The sound is now ok.
I still have the problem that I wrote at the beginning of this discussion (freezing of the device) but it is less rare.
u have the latest version 0.3.6?
tabon said:
u have the latest version 0.3.6?
Click to expand...
Click to collapse
Yes (of the ROM)
did u upgraded? or its from a fresh installation ?
if its fresh, sorry i dont have anything else to say...
if its not..wipe data and format system..and do a clean install
gl
tabon said:
did u upgraded? or its from a fresh installation ?
if its fresh, sorry i dont have anything else to say...
if its not..wipe data and format system..and do a clean install
gl
Click to expand...
Click to collapse
I understand what you want to say but I did a clean install. I wiped all and then I installed the ROM....i suppose that is a problem of the beta version....I'm waiting for a stable version....Thanks anyway
anytime..
from mount menu(at recovery)
did u format system ? wipes are not enough
tabon said:
anytime..
from mount menu(at recovery)
did u format system ? wipes are not enough
Click to expand...
Click to collapse
No, actually i didn't format the system, i did only all wipe. I can do also the format .
So I can do this:
wipe chache
wipe dalvik cache
factory reset
format system
flash ROM
it's right???
do this
i did this and everything works fine
1. wipe data/factory reset
2. mounts and storage --> format system
u dont need to do anything else..these 2 options do all the other wipes and formats
3. install clean rom
tell me what happend
tabon said:
do this
i did this and everything works fine
1. wipe data/factory reset
2. mounts and storage --> format system
u dont need to do anything else..these 2 options do all the other wipes and formats
3. install clean rom
tell me what happend
Click to expand...
Click to collapse
unbelievable.....now the ROM doesn't freeze.....but i have again the problem of volume....
Gallery problems
Its a great ROM with a few expected problems being a beta. The problem I'm having is with the gallery. I can't access any of my albums.
I've tried Quick Pics but it doesn't find images stored online in G+ or Picasa albums.
Has anyone else come across this using a2sd?
sorry man, dont know what else to say..
Related
Hi Everyone
I have a wildfire s
MARVEL PVT SHIP S-ON RL
HBOOT 1.10.001
Metro Pcs USA
I have my bootloader unlocked I am rooted and have clockwork recovery
I am trying to install CM9
Can anyone please tell me where to find a good ROM and how to install it??????
I have tried to install a few off this site but my phone just goes dead after reboot and won't turn back on, all i can do is get into recovery and restore it
Can anyone pleaseHelp:silly:
Look in the dev section, Modpunk's CM9 Alpha5.
Download-Move to SD-Enter recovery-Wipe data-Wipe Dalvik-install zip-install gapps.
-----------
"You can overclock as much as you want, your phone will always seem too slow."
Modpunk's CM9 is the only CM9 that can be seen as stable enough for daily usage.
http://forum.xda-developers.com/showthread.php?t=1633198
omnomnomkimiiee said:
Look in the dev section, Modpunk's CM9 Alpha5.
Download-Move to SD-Enter recovery-Wipe data-Wipe Dalvik-install zip-install gapps.
-----------
"You can overclock as much as you want, your phone will always seem too slow."
Click to expand...
Click to collapse
Thank you!!!! going to try it !!! sorry I'm a noob at this , can you tell me in some detail about installing gapps or refer me to a link that can,
scott1431966 said:
Thank you!!!! going to try it !!! sorry I'm a noob at this , can you tell me in some detail about installing gapps or refer me to a link that can,
Click to expand...
Click to collapse
I'll second this!
Even though he says to not use it for Everyday use.. It's rather nice and it's stable for me so far, it has some nice features in it too.
This is the first Android phone i've had along with the first rooted phone and the first custom ROM.
I'm really happy I decided to try this, but make sure you clear the cache, clear the dalvik cache, reset to factory settings, then clean the cache again. It will then take a little while on first boot, be sure to install the gapps too (specific for this ROM) - I think? :fingers-crossed:
I've got my Wildfire overclocked to 768MHz and it's a rather nice boost, just makes it that bit smoother for a few things. I've also got the minimum set to 200MHz from 245 to save battery! :good:
You'll want release 5 of the ROM though, I tried 4 and the Camera didn't work (as the update log says).
scott1431966 said:
Thank you!!!! going to try it !!! sorry I'm a noob at this , can you tell me in some detail about installing gapps or refer me to a link that can,
Click to expand...
Click to collapse
Flash these GApps just like you flashed Modpunk's ROM in your reecovery : http://goo.im/gapps/gapps-ics-20120429-signed.zip
Matt-Matt said:
I'll second this!
Even though he says to not use it for Everyday use.. It's rather nice and it's stable for me so far, it has some nice features in it too.
This is the first Android phone i've had along with the first rooted phone and the first custom ROM.
I'm really happy I decided to try this, but make sure you clear the cache, clear the dalvik cache, reset to factory settings, then clean the cache again. It will then take a little while on first boot, be sure to install the gapps too (specific for this ROM) - I think? :fingers-crossed:
I've got my Wildfire overclocked to 768MHz and it's a rather nice boost, just makes it that bit smoother for a few things. I've also got the minimum set to 200MHz from 245 to save battery! :good:
You'll want release 5 of the ROM though, I tried 4 and the Camera didn't work (as the update log says).
Click to expand...
Click to collapse
Thank you !!! This is my first Android phone and trying this also, I have a few questions if you have the time
first does it matter if my S is on? if so how do I get it off?
Do I install the the gapps before or after the Rom
and you said it will take a little while on first boot??? After I install the Rom my phone goes blank just a black screen, but it looks like it is on can see a little light, like in the background, should I leave it like that and wait????
again Thank you for you're info!!!! it also looks like there is a 6th release of this Rom
I've tried to install this Rom it aborts install I read your Q&A thread where you have the same problem , but doesn't work for me why can't I get this????? what was that about format data?
here are the steps I tried :
Wipe cache partition
wipe Dalvik cache
wipe data/ factory reset
Wipe cache partition again
wipe Dalvik cache again
install zip from sdcard
choose zip from sdcard
get E: can't open zip( bad) installation aborted
sidthegreatest said:
Flash these GApps just like you flashed Modpunk's ROM in your reecoveryl]
Click to expand...
Click to collapse
Thank you!!! install these after the Rom? and clear all caches and factory reset also ?
scott1431966 said:
Thank you!!! install these after the Rom? and clear all caches and factory reset also ?
Click to expand...
Click to collapse
yes just flash them after you flash the ROM. No need to clear cache or do a factory reset if you have installed the ROM and are flashing the google apps.
scott1431966 said:
Wipe cache partition
wipe Dalvik cache
wipe data/ factory reset
Wipe cache partition again
wipe Dalvik cache again
install zip from sdcard
choose zip from sdcard
get E: can't open zip( bad) installation aborted
Click to expand...
Click to collapse
You have to format /system and sd-ext in mounts and storage
Sent from my Wildfire S A510e using xda premium
Cm9 rco marvel alpha 6
CM9 is very poor on wfs. I tried and I dont like it.:cyclops:
Hello,
I'm using JB AOKP by Vj and for space needed reasons I decided to try the int2ext+ script. It works only the first time I boot the phone, on the second time it stays stucked on the boot animation.
Thanks in advance.
Did you delete the old script first?
k3lcior said:
Did you delete the old script first?
Click to expand...
Click to collapse
I suppose yes, I made a full wipe (system, dalvik, sdext, etc tec). is it enough?
You wiped rom and then flashed a2sd script?
Sent from my HTC Desire using xda premium
k3lcior said:
You wiped rom and then flashed a2sd script?
Yes I did it. I first wiped everything, flashed the ROM, and then installled app2sd (int2ext+) script.
Click to expand...
Click to collapse
Davide Manca said:
I suppose yes, I made a full wipe (system, dalvik, sdext, etc tec). is it enough?
Click to expand...
Click to collapse
I dont think u did. Like k3lcior said u need to delete a2sd from the rom. So on ur computer, open the rom zip and go to system/etc/init.d folder and check if theres any a2sd script there, if so delete it. Also check system/bin. Then put rom on sdcard and in recovery, full wipe, wipe dalvik then flash rom then int2ext script then reboot.
Sent from my HTC Desire
My Desire is also stucking in the boot animation. I tried to use Int2Ext and some others, but there is no change. My rom is http://forum.xda-developers.com/showthread.php?t=2070704. It works for the first boot, but it won't work for the 2nd. I removed a2sd but it didn't change anything. What can i do?
Thanks
Gainer5 said:
My Desire is also stucking in the boot animation. I tried to use Int2Ext and some others, but there is no change. My rom is http://forum.xda-developers.com/showthread.php?t=2070704. It works for the first boot, but it won't work for the 2nd. I removed a2sd but it didn't change anything. What can i do?
Thanks
Click to expand...
Click to collapse
How did you partition your sd-card?
I had to primary partitions. My first is 6gb FAT32 and my second is 2gb Ext2.
I solved my problem. My solution:
1. Like mentioned above, remove a2sd from the int.d folder or how it's called
2. because it didn't reboot, I cleanded the dalvik cache with the clear dalvik cache zip by croniccorey which was made for the use with the script. you can find it here http://forum.xda-developers.com/showthread.php?t=1716124. it should fix the problem.
Hi there
I have wiped data, cache, dalvik cache and fix permissions, flashed Remics 1.8 and Gapps 20120429 and i'm stuck at Remics boot animation.
I am trying for the second time, this time I wiped data, cache before flashing gaps too but it's booting for 15 minutes now and still waiting.
The ROM was released today so I have no feedback. Anyone tried it already?
Thanks
Zbriu said:
Hi there
I have wiped data, cache, dalvik cache and fix permissions, flashed Remics 1.8 and Gapps 20120429 and i'm stuck at Remics boot animation.
I am trying for the second time, this time I wiped data, cache before flashing gaps too but it's booting for 15 minutes now and still waiting.
The ROM was released today so I have no feedback. Anyone tried it already?
Thanks
Click to expand...
Click to collapse
To make sure you have the full file try checking the size, download the file, check size, if same click cancel and if not same delete the incomplete version(sometimes it's just a network problem, happened to me before)
After checking you have full sizes, follow these steps:
(1) copying the files to you phone.
1- use CWM, connect usb to computer.
2- go to mounts and storage.
3- connect usb storage.
4- copy files to the phone's internal memory.
(2) flash the rom.
1- go to mounts and storage(again)
2-format /system /data /cache
3- go back and wipe data(just to make sure) then go to advanced and wipe dalvik cache.
4- go back and flash rom and Gapps.
5- again go to advanced and but now fix permissions.
6-reboot and enjoy!
Press The Thanks Button If I Helped.
Thanks
I had to install another rom but i'll try it again tonight and than i'll let you know if it worked. Thanks for helping me.
Didn't work but I guess it's a problem with the rom and the developer is trying to fix it, but thank you for your advise! :good:
Zbriu said:
Didn't work but I guess it's a problem with the rom and the developer is trying to fix it, but thank you for your advise! :good:
Click to expand...
Click to collapse
no problem, why not try the slim rom until he fixes it?
7amada100 said:
no problem, why not try the slim rom until he fixes it?
Click to expand...
Click to collapse
I went back to cm9 b4 because i was having some apn issues with slim, i think cm9 is currently the most stable custom rom
Zbriu said:
I went back to cm9 b4 because i was having some apn issues with slim, i think cm9 is currently the most stable custom rom
Click to expand...
Click to collapse
True, arco really worked hard on it. I like to take the risk for the features
Hey guyss
I am currently using RemPuzzle's latest ROM but the reason why i am posting it here is becoz it has been happening with all the ROMs that I have tried!
The phone works completely fine until the display is turned off for quite some time (put to sleep)! Then when ever I try to open it, it wont! The only way to make it work is by battery pull! I have tried flashing other ROMs but the same problem occurs with them. For now, I have selected in 'Screen Timeout' to 'never turn off'! But still it is very annoying me!
What I do when flashing the ROM: (CWM 5.0.2.0)
Wipe data/cache partition
Wipe cache partition
Wipe Dalvik Cache
Wipe boot
Wipe cahe
Wipe data
Wipe system
Flash ROM
Flash gapps (if necessary)
Flash CronMod
Flash CronMod dalvik cache wipe tool
Reboot system
Do tell me if im doing anything wrong!
Thnx in advance!
CallOfHonor100 said:
Hey guyss
I am currently using RemPuzzle's latest ROM but the reason why i am posting it here is becoz it has been happening with all the ROMs that I have tried!
The phone works completely fine until the display is turned off for quite some time (put to sleep)! Then when ever I try to open it, it wont! The only way to make it work is by battery pull! I have tried flashing other ROMs but the same problem occurs with them. For now, I have selected in 'Screen Timeout' to 'never turn off'! But still it is very annoying me!
What I do when flashing the ROM: (CWM 5.0.2.0)
Wipe data/cache partition
Wipe cache partition
Wipe Dalvik Cache
Wipe boot
Wipe cahe
Wipe data
Wipe system
Flash ROM
Flash gapps (if necessary)
Flash CronMod
Flash CronMod dalvik cache wipe tool
Reboot system
Do tell me if im doing anything wrong!
Thnx in advance!
Click to expand...
Click to collapse
I think the phone isn't functioning properly, you've done everything right :good:
But my best guess that it's the phone
I've got a few tips, revert back to stock
Flash cwm revolutionary 4.0.1.4 and re install a custom ROM, it's what I've done every time to solve all my issues :good:
If my way doesn't work or solve any issues, then I'll try to give more advice in return, if others would like to aswell
Also if phone still reacts all weird, it's best if you take the phone to someone who can fix it up :good:
In any case i'll try and do my best
CallOfHonor100 said:
Hey guyss
I am currently using RemPuzzle's latest ROM but the reason why i am posting it here is becoz it has been happening with all the ROMs that I have tried!
The phone works completely fine until the display is turned off for quite some time (put to sleep)! Then when ever I try to open it, it wont! The only way to make it work is by battery pull! I have tried flashing other ROMs but the same problem occurs with them. For now, I have selected in 'Screen Timeout' to 'never turn off'! But still it is very annoying me!
What I do when flashing the ROM: (CWM 5.0.2.0)
Wipe data/cache partition
Wipe cache partition
Wipe Dalvik Cache
Wipe boot
Wipe cahe
Wipe data
Wipe system
Flash ROM
Flash gapps (if necessary)
Flash CronMod
Flash CronMod dalvik cache wipe tool
Reboot system
Do tell me if im doing anything wrong!
Thnx in advance!
Click to expand...
Click to collapse
Do you have a HTC buzz or a HTC bee? This is a deep sleep issue from the kernel. My and kylon had this issue with the htc bee.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
heavy_metal_man said:
Do you have a HTC buzz or a HTC bee? This is a deep sleep issue from the kernel. My and kylon had this issue with the htc bee.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Click to expand...
Click to collapse
Yep! I am sure it is HTC buzz!
Stone. Cold said:
I think the phone isn't functioning properly, you've done everything right :good:
But my best guess that it's the phone
I've got a few tips, revert back to stock
Flash cwm revolutionary 4.0.1.4 and re install a custom ROM, it's what I've done every time to solve all my issues :good:
If my way doesn't work or solve any issues, then I'll try to give more advice in return, if others would like to aswell
Also if phone still reacts all weird, it's best if you take the phone to someone who can fix it up :good:
In any case i'll try and do my best
Click to expand...
Click to collapse
Unrooted and rooted again! At first, i thought it had worked but...BAM...it hanged again!
I think I am not rooting correctly...=(
1. I wasnt able to S-ON my device after unrooting so I carried on...=/
2. After doing the revolutionary part, I wasnt able to install Android Bootloader Interface! It kept giving me the error that the hash of the file is missing or something! So I did something else. Now, when I go to cmd and write 'adb devices', it doesnt show my device! Although, when I write 'fastboot devices', it shows my device attached! (weird)
3. I flashed recovery with revolutionary so I reckon that I didnt had to do the unrevoked method...was i wrong??
Help appreciated...=)
CallOfHonor100 said:
Yep! I am sure it is HTC buzz!
Unrooted and rooted again! At first, i thought it had worked but...BAM...it hanged again!
I think I am not rooting correctly...=(
1. I wasnt able to S-ON my device after unrooting so I carried on...=/
2. After doing the revolutionary part, I wasnt able to install Android Bootloader Interface! It kept giving me the error that the hash of the file is missing or something! So I did something else. Now, when I go to cmd and write 'adb devices', it doesnt show my device! Although, when I write 'fastboot devices', it shows my device attached! (weird)
3. I flashed recovery with revolutionary so I reckon that I didnt had to do the unrevoked method...was i wrong??
Help appreciated...=)
Click to expand...
Click to collapse
What is this cronmod you've been flashing?
Sent from my Nexus 7 using Tapatalk 4
heavy_metal_man said:
What is this cronmod you've been flashing?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Its this:
http://forum.xda-developers.com/showthread.php?t=1716124
But now there is something else!
I again unrooted my phone and rooted it again! This time, I did everything perfectly! The drivers, the unrevoked, everything right! But, I didnt flash ANYTHING!! I didnt flash cronmod or even a ROM! And it still hangs up!! =(
Is it possible that im rooting it wrong! Or it doesnt support sense? =/
CallOfHonor100 said:
Its this:
http://forum.xda-developers.com/showthread.php?t=1716124
But now there is something else!
I again unrooted my phone and rooted it again! This time, I did everything perfectly! The drivers, the unrevoked, everything right! But, I didnt flash ANYTHING!! I didnt flash cronmod or even a ROM! And it still hangs up!! =(
Is it possible that im rooting it wrong! Or it doesnt support sense? =/
Click to expand...
Click to collapse
Well this will only work if you have the correct ext partition on your sdcard, and I don't think root has anything to do with this. Have you ran an ruu yet? If not run one, if yes which one?
Sent from my Nexus 7 using Tapatalk 4
heavy_metal_man said:
Well this will only work if you have the correct ext partition on your sdcard, and I don't think root has anything to do with this. Have you ran an ruu yet? If not run one, if yes which one?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Oh DAMN! I completely forgot about the ext partition! =D
I made the partition long ago via recovery! I dont know what type of ext it is... =/
will removing the ext would solve the problem?
Which ext is the correct ext partition??
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
riahc3 said:
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
Click to expand...
Click to collapse
No, but most people would flash gapps 6 too, else you will miss a lot (must be done at the same time as the ROM the first time to set permissions)
IronRoo said:
No, but most people would flash gapps 6 too, else you will miss a lot (must be done at the same time as the ROM the first time to set permissions)
Click to expand...
Click to collapse
What I ment is before flashing it....Afterwards/during of couse Ill flash gapps
riahc3 said:
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
Click to expand...
Click to collapse
Copy CM13 rom and gapp in your sd card.
Backup your old firmware through twrp.
Do a factory Reset from Wipe.
And install CM13 and gapp respectively.
And enjoy ^_^
syednawaz said:
Copy CM13 rom and gapp in your sd card.
Backup your old firmware through twrp.
Do a factory Reset from Wipe.
And install CM13 and gapp respectively.
And enjoy ^_^
Click to expand...
Click to collapse
checked every file hash matches, did exactly as written, done all of above and it doesn't work
TWRP went on in less than 10 second does that sound normal ? and how do you know if its actually on there?
Nope. Installation take atleast 2 or 3 minutes.
and if its installed properly you would have seen different rom from the stock.
Here is what i use for s4 mini(i9192). Also used it on i9190 model as well.
http://forum.xda-developers.com/galaxy-s4-mini/development/rom-aokp-rom-25-apr-2016-t3366314
and these steps mentioned in the website.
A. Initial install
1. Copy ROM and Gapps to your external SD Card or internal memory
2. Boot into recovery
3. Wipe
4. Install ROM and Gapps
5. Reboot
Its simple. Should have worked.
I hope you have installed your model rom.
A question the system format is required to install the rom ??
juanpabloml said:
A question the system format is required to install the rom ??
Click to expand...
Click to collapse
In TWRP Swipe for factory reset will do the job. you can also do dalvik /art cache in advance wipe. System or other wipe never did it for changing roms.
syednawaz said:
In TWRP Swipe for factory reset will do the job. you can also do dalvik /art cache in advance wipe. System or other wipe never did it for changing roms.
Click to expand...
Click to collapse
Ie that enough only to make WIPE FACTORY RESET AND WIPE DALVIK CACHE is not necessary to the FORMAT SYSTEM, DATA AND CACHE ??
sorry i do not understand.
to install a rom just do a factory reset. nothing else is necessary.
If you do not do factory reset, sometimes you will not be able to install a new version of rom(for example, from kitkat to lollipop).
if you do not do factory reset its called dirty flash.
for example
you are using custom rom cm13. and it has a new update released, you go in twrp recovery and install the updated rom without doing factory reset. this way you can keep all the application and data you have.
i hope i am making some sense. it is hard for me to explain.
well do some flashing and you will understand but always make a backup.