Develop Bugs

[Q] Will a 4.3 ROM (like CM 10.2) work with the ND8 modem?

Currently running stock 4.4.2 (ND8) and looking to try out Cyanogenmod 10.2, which is 4.3
The only other phone I have any experience flashing ROMs on was a Sprint S2 (D710) and no custom ROMs were compatible with its Jellybean modem, so you had to flash an old modem separately. Is there any similar situation with this phone? Does it make any difference that I'm trying to flash a 4.3 ROM? I'm not very familiar with how that stuff works.

This will answer a lot of your questions.
http://forum.xda-developers.com/showthread.php?t=2743554
But yes you can flash any ROM you like, still, but do not ever try to downgrade your modem (or bootloader) now that you're on the full Knox ND8 bootloader. You'll hard brick your phone if you do.
I have no personal experience with just how well the "old" ROMs work with the ND8 modem, FYI.
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

[Q] How do I Downgrade from kit kat 4.4.2 to Jellybean 4.3 if possible?

I am sick of the gps problems with the latest kit kat update and i want to see if its possible to go back to jellybean non rooted or rooted, right now i am currently not rooted

Not possible no matter what you do...you will brick your device....however if you root on 4.4.2 there is custom Roms and such you can flash that are jellybean...you just can't downgrade

REV3NT3CH said:
Not possible no matter what you do...you will brick your device....however if you root on 4.4.2 there is custom Roms and such you can flash that are jellybean...you just can't downgrade
Click to expand...
Click to collapse
so i just use cf auto root on odin 3.07 and what custom rom do i do?

idontknowhow said:
so i just use cf auto root on odin 3.07 and what custom rom do i do?
Click to expand...
Click to collapse
CF-AutoRoot had worked for some on ND8 but not others. Odining the latest Philz Touch Recovery tar.md5 is more reliable and you'll need it to flash your custom ROM anyway. It's the only custom recovery that works 100% on ND8 bootloader.
If you flash a custom ROM, it'll already be rooted.
Any custom ROM in Development or Original Development. Just don't ever flash any other modem than ND8 or NDC, either, or you'll brick your phone.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

link
can u give me a link for latest Philz Touch Recovery tar.md5 and the jelly bean custom rom?

http://forum.xda-developers.com/showthread.php?t=2446393
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

4.4.4 custom back to 4.3 stock possible?
Similar situation but I've got a great working stock but rooted (towelroot) Sprint S3 on JellyBean 4.3 that I'd like to be able to return to if my first custom ROM attempt does not work out like I want. Looking at SlimKat 4.4.4 and using TWRP I would like to know if there is a problem going back to my stock 4.3 ROM? (I've backed up everything with TWRP) I've got all KNOX frozen with Titanium but I don't know if that is good enough to keep the problem I've come across with people not being able to downgrade due to KNOX issues. Been looking at flashing a ROM for a couple years and about to take the plunge but would like any advice / thoughts on this situation. Thanks

droidzer1 said:
Similar situation but I've got a great working stock but rooted (towelroot) Sprint S3 on JellyBean 4.3 that I'd like to be able to return to if my first custom ROM attempt does not work out like I want. Looking at SlimKat 4.4.4 and using TWRP I would like to know if there is a problem going back to my stock 4.3 ROM? (I've backed up everything with TWRP) I've got all KNOX frozen with Titanium but I don't know if that is good enough to keep the problem I've come across with people not being able to downgrade due to KNOX issues. Been looking at flashing a ROM for a couple years and about to take the plunge but would like any advice / thoughts on this situation. Thanks
Click to expand...
Click to collapse
You can flash and nandroid restore absolutely any ROM you want. You just can't downgrade your bootloader or modem once you have the 4.3 or 4.4 knox bootloader. The knox apps in the ROM itself won't make any difference to what you can or can't do in recovery.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

flash done but still questions
Thanks - I just flashed Slimbean 4.3 and so far no problem. In traditional computers I understand a bootloader but I guess I'm not clear on what it does in the android other than boot the OS. Is there any reason one would NOT want a 4.4 or 4.4.4 bootloader? My stock ROM was 4.3 and had Knox so I guess I've already got a newer type bootloader. So if I flash SlimKat 4.4.4 ROM I would still be able reflash back to my stock 4.3 ROM I saved with TWRP backup (or maybe I need to use Nandroid backup?). I grabbed Nandroid but haven't used it. Everything is currently saved with TWRP but if I recall Nandroid can use TWRP backups ?
:good:

i downgraded from official kitkat to miui v5 JB but just be careful with that bootloader

Tnx, I just went from that 4.4.4 SlimKat back to my stock 4.3 JB with no problem. I guess I'm still not clear on what would change the bootloader or if that's an issue running between 4.3 and 4.4 ROM's. That is likely all I'll be experimenting with. Going to give Sonic Developers Open Kang SOKP ROM a try here shortly. Slimkat was fairly nice but made things too small for my eyes and a couple other very little issues - other than that looked like a nice ROM in my limited experience. Lots of adjustable fine tuning features.

Wow - that Sonic Developers Open Kang SOKP ROM is really sweet... and no problems switching back and forth with 4.4.4 and 4.3. I guess I haven't touched the bootloader Still not clear on what would change the bootloader and if there is any incompatibility between 4.3 and 4.4.4 although I'm so thilled with the Sonic SOKP ROM I'll probably stay with that.

droidzer1 said:
Wow - that Sonic Developers Open Kang SOKP ROM is really sweet... and no problems switching back and forth with 4.4.4 and 4.3. I guess I haven't touched the bootloader Still not clear on what would change the bootloader and if there is any incompatibility between 4.3 and 4.4.4 although I'm so thilled with the Sonic SOKP ROM I'll probably stay with that.
Click to expand...
Click to collapse
Using odin to flash one of the Ota files would change your bootloader. If you're just flashing rom zips you're perfectly safe. I'm also running the latest SOKP and love it. Aside from not being able to get viper4android to work.

Kreatur3 said:
Using odin to flash one of the Ota files would change your bootloader. If you're just flashing rom zips you're perfectly safe. I'm also running the latest SOKP and love it. Aside from not being able to get viper4android to work.
Click to expand...
Click to collapse
are you having trouble installing the sound driver? i couldn't install it in stock NDC yet i could on stock ND8
and go check out my thread for viper4android in my signature

6th_Hokage said:
are you having trouble installing the sound driver? i couldn't install it in stock NDC yet i could on stock ND8
and go check out my thread for viper4android in my signature
Click to expand...
Click to collapse
Yeah. Every time I open viper it asks me to install the driver. Running the latest, and possibly last, build of sokp. I'll check your signature later. Tapatalk doesn't show them and I'm driving. Lol

[Q] Question about Stock 4.4.2 and flashing

Hey guys got a couple questions see below.
1. My first question is, Is there a way to Flash Stock 4.4.2 without using a computer and odin, my laptop doesn't read my phone, ive done installed and updated drivers, and everything. is there a way to flash it like you would a custom rom. I know i read that i could use Mobile Odin Pro, but at the same time i read that its not to safe to use that, and tbh not sure why you have to pay for it... i know there cracked Mobile odin pro and i havent tried it yet.
2. My next question is, is there a simple way to flash my sprint s3 to another career, by flashing a rom that will flash it to another carier not sure if this makes sense lol, basicly my Phone was flashed to Page plus, and i accidentally updated it and lost the flash, and i dont really want to pay to get it flashed again, is there a real easy way to flash it with with a custom flashing rom, and if my laptop ever reads my phone is there a easy way to do it with a laptop besides paying for it( not looking for cracks). My phone number for Page plus and account is still active.
3. My last question is im looking for an awsome rom, One that does not overheat my phone like Hellfire does, ive tried hellfire, CM(also nighty), Vanir, PAc rom, Carbon. and others to.

angelofdooms said:
1. My first question is, Is there a way to Flash Stock 4.4.2 without using a computer and odin, my laptop doesn't read my phone, ive done installed and updated drivers, and everything. is there a way to flash it like you would a custom rom. I know i read that i could use Mobile Odin Pro, but at the same time i read that its not to safe to use that, and tbh not sure why you have to pay for it... i know there cracked Mobile odin pro and i havent tried it yet.
Click to expand...
Click to collapse
talking about cracked apps is taboo and no you have to use a computer and what usb cable are you using? do you have the stock usb cable that came with your phone? and you can't use Mobile Odin to flash ND8 stock it won't work at all
angelofdooms said:
2. My next question is, is there a simple way to flash my sprint s3 to another career, by flashing a rom that will flash it to another carier not sure if this makes sense lol, basicly my Phone was flashed to Page plus, and i accidentally updated it and lost the flash, and i dont really want to pay to get it flashed again, is there a real easy way to flash it with with a custom flashing rom, and if my laptop ever reads my phone is there a easy way to do it with a laptop besides paying for it( not looking for cracks). My phone number for Page plus and account is still active.
Click to expand...
Click to collapse
.....No, there's a thread to flash to Sprint though
angelofdooms said:
3. My last question is im looking for an awsome rom, One that does not overheat my phone like Hellfire does, ive tried hellfire, CM(also nighty), Vanir, PAc rom, Carbon. and others to.
Click to expand...
Click to collapse
Stock ND8 and or any Rom based on TW and as long as you don't have your screen turned on for a long time it shouldn't Over Heat...

6th_Hokage said:
talking about cracked apps is taboo and no you have to use a computer and what usb cable are you using? do you have the stock usb cable that came with your phone? and you can't use Mobile Odin to flash ND8 stock it won't work at all
.....No, there's a thread to flash to Sprint though
Stock ND8 and or any Rom based on TW and as long as you don't have your screen turned on for a long time it shouldn't Over Heat...
Click to expand...
Click to collapse
I have the stock sub cable and also a more expensive cable. Sometimes it does read and sometimes it doesn't,
Can I backup my stock Rom before flashing a custom rom, I mean I've tried it through Phil's recovery and find that once I restore it using Phil some apps and things don't work correctly.
What's a rom you would recommend.

angelofdooms said:
What's a rom you would recommend.
Click to expand...
Click to collapse
I would recommend Tribute Rom or Wicked X 8.0.....and with the back ups make sure you have the latest Philz recovery which should be 6.48.4 and before each backup wipe cache and dalvik cache then your backups should work flawlessly

6th_Hokage said:
I would recommend Tribute Rom or Wicked X 8.0.....and with the back ups make sure you have the latest Philz recovery which should be 6.48.4 and before each backup wipe cache and dalvik cache then your backups should work flawlessly
Click to expand...
Click to collapse
Good to know, Ive tried Tribute, its alright, havent tried wicked though i def give it a try.

the galaxy s3 can actually be flashed to a couple of different carriers including page plus and metro pcs i think unfortunately its not a simple process and its long i flashed mine to page plus awhile back

angelofdooms said:
Hey guys got a couple questions see below.
1. My first question is, Is there a way to Flash Stock 4.4.2 without using a computer and odin, my laptop doesn't read my phone, ive done installed and updated drivers, and everything. is there a way to flash it like you would a custom rom. I know i read that i could use Mobile Odin Pro, but at the same time i read that its not to safe to use that, and tbh not sure why you have to pay for it....
Click to expand...
Click to collapse
If you're already on the ND8 or NDC bootloader, then you can flash the stock (although rooted) ND8 or NDC ROM through custom recovery like the latest PhilZ. I'm guessing you're not, though.
Mobile Odin had had its uses in the past, just not handy with more recent versions of TouchWiz.
v2.0 flashable version now posted near the bottom of the first post of v2.0 FLASHABLE-3Minit 1000+ Batteries for Conquest:Singularity v8 & v1.0 for NDC/ND8..
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors, also available through the 3Minit Battery Mod, #22 in the Users folder
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v8.4, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

angelofdooms said:
Hey guys got a couple questions see below.
2. My next question is, is there a simple way to flash my sprint s3 to another career, by flashing a rom that will flash it to another carier not sure if this makes sense lol, basicly my Phone was flashed to Page plus, and i accidentally updated it and lost the flash, and i dont really want to pay to get it flashed again, is there a real easy way to flash it with with a custom flashing rom, and if my laptop ever reads my phone is there a easy way to do it with a laptop besides paying for it( not looking for cracks). My phone number for Page plus and account is still active.
Click to expand...
Click to collapse
Here's the thread for flashing to Page Plus. I haven't done it, I'm on Sprint. I was having a lot of trouble getting my S2 on Page Plus. For phone it wasn't too bad, but I could never get data on and things were getting confusing with conflicting information, several third party programs on the PC, needing a donor phone, etc.
http://forum.xda-developers.com/showthread.php?p=55006058

roirraW "edor" ehT said:
If you're already on the ND8 or NDC bootloader, then you can flash the stock (although rooted) ND8 or NDC ROM through custom recovery like the latest PhilZ. I'm guessing you're not, though.
Mobile Odin had had its uses in the past, just not handy with more recent versions of TouchWiz.
v2.0 flashable version now posted near the bottom of the first post of v2.0 FLASHABLE-3Minit 1000+ Batteries for Conquest:Singularity v8 & v1.0 for NDC/ND8..
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors, also available through the 3Minit Battery Mod, #22 in the Users folder
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v8.4, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
My phone is rooted with the latest Philz, and is on nd8, 4.4.2.

[Q] Downgrade Question?

I have a Samsung Galaxy s3 SPH-L710 and it currently has firmware 4.4.3 and I want to downgrade so I can change my SPC, plus my MEDI and stuff. My question is can I do this due to KNOX?
I also was wondering if I could upgrade back to 4.4.3 after I change the SPC to "000000" and the MEDI.

I don't think you have to downgrade the bootloader to do that, just the ROM, and you can flash ROMs to your heart's content, just don't ever Odin a bootloader or modem older than what you have now.
4.4.2 is the latest official TouchWiz ROM, and ND8 & NDC are the latest bootloader and modem for our phone.
Recovery FLASHABLE version now posted near the bottom of the first post of the 3Minit Battery Mod for Conquest-Singularity and both Stock ND8 and NDC with 1000+ animated battery icons..
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v7.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

roirraW "edor" ehT said:
I don't think you have to downgrade the bootloader to do that, just the ROM, and you can flash ROMs to your heart's content, just don't ever Odin a bootloader or modem older than what you have now.
4.4.2 is the latest official TouchWiz ROM, and ND8 & NDC are the latest bootloader and modem for our phone.
Recovery FLASHABLE version now posted near the bottom of the first post of the 3Minit Battery Mod for Conquest-Singularity and both Stock ND8 and NDC with 1000+ animated battery icons..
[BATTERY] Plasma Battery! ������ & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v7.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
I would like to use STOCK ROM so how do I change the SPC to "000000" Just to make sure this is the STOCK ROM for 4.1.2 (Check Attachment)? I would like to know what Recovery I should use, also how to be able to change the SPC on Stock Rom 4.4.3

w4rl0 said:
I would like to use STOCK ROM so how do I change the SPC to "000000" Just to make sure this is the STOCK ROM for 4.1.2 (Check Attachment)? I would like to know what Recovery I should use, also how to be able to change the SPC on Stock Rom 4.4.3
Click to expand...
Click to collapse
you said you have 4.4.3 do you have a custom rom? like CarbonRom or CM11? and before you rooted and changed the rom was your phone on 4.1.2 or 4.4.2?

6th_Hokage said:
you said you have 4.4.3 do you have a custom rom? like CarbonRom or CM11? and before you rooted and changed the rom was your phone on 4.1.2 or 4.4.2?
Click to expand...
Click to collapse
My phone was on 4.4.3 when I rooted it and No i Still have STOCK ROM on it.

w4rl0 said:
My phone was on 4.4.3 when I rooted it and No i Still have STOCK ROM on it.
Click to expand...
Click to collapse
are you sure your not on 4.3 cause the latest boost has for the s3 is NDC 4.4.2 same with virgin and also Sprint that i know of the latest is ND8 4.4.2 for the s3....so either you have a different phone or a different company that has 4.4.3 TW already hold on im gonna Google search

6th_Hokage said:
are you sure your not on 4.3 cause the latest boost has for the s3 is NDC 4.4.2 same with virgin and also Sprint that i know of the latest is ND8 4.4.2 for the s3....so either you have a different phone or a different company that has 4.4.3 TW already hold on im gonna Google search
Click to expand...
Click to collapse
I'm an idiot, Yes it says Android version 4.4.2, with Baseband of L710VPUNDND8. Does that help?

w4rl0 said:
I'm an idiot, Yes it says Android version 4.4.2, with Baseband of L710VPUNDND8. Does that help?
Click to expand...
Click to collapse
yes....yes it does this means you can't Odin any lower rom that comes with bootloader/modem and/or flash the bootloader/modem in recovery cause if you do you will Hard Brick your phone
and i mean Lower roms in Odin that means MK3 and MD4 and other roms lower than ND8 or NDC

6th_Hokage said:
yes....yes it does this means you can't Odin any lower rom that comes with bootloader/modem and/or flash the bootloader/modem in recovery cause if you do you will Hard Brick your phone
and i mean Lower roms in Odin that means MK3 and MD4 and other roms lower than ND8 or NDC
Click to expand...
Click to collapse
So what does that mean? I cannot change the SPC and I am screwed? I just need to this phone to Straight talk service

I really need some help on this matter. I use CDMA Workshop can I load a PRL and is that what I need to change the service on my phone.

w4rl0 said:
So what does that mean? I cannot change the SPC and I am screwed? I just need to this phone to Straight talk service
Click to expand...
Click to collapse
As I said. You can flash any ROM you want, including stock. You just can't ODIN an older stock ROM or modem than what you have already. I have no idea how to change those things, this thread is about downgrading. You can Odin a custom recovery like PhilZ Touch Recovery, which is the most reliable recovery under Stock 4.4.2. Then use your custom recovery to flash whatever older stock ROM: probably 4.1.1 because I had to downgrade a friend's AT&T Note 2 to 4.1.1 because it allowed easier unlocking that phone from that carrier. I have no idea if 4.1.1 on the SPH-L710 will get you what you need, you'll have to use the search field in the main S3 section and search for MEID and separately for SPC, or google for SPH-L710 MEID or SPH-L710 SPC 000000 and see if you find out how to change it those.

roirraW "edor" ehT said:
As I said. You can flash any ROM you want, including stock. You just can't ODIN an older stock ROM or modem than what you have already. I have no idea how to change those things, this thread is about downgrading. You can Odin a custom recovery like PhilZ Touch Recovery, which is the most reliable recovery under Stock 4.4.2. Then use your custom recovery to flash whatever older stock ROM: probably 4.1.1 because I had to downgrade a friend's AT&T Note 2 to 4.1.1 because it allowed easier unlocking that phone from that carrier. I have no idea if 4.1.1 on the SPH-L710 will get you what you need, you'll have to use the search field in the main S3 section and search for MEID and separately for SPC, or google for SPH-L710 MEID or SPH-L710 SPC 000000 and see if you find out how to change it those.
Click to expand...
Click to collapse
Thanks for the help! Could you provide me a link to that recovery and a good ROM?

w4rl0 said:
Thanks for the help! Could you provide me a link to that recovery and a good ROM?
Click to expand...
Click to collapse
Scratch that! I added the recovery, I now need to know do I need to change the SPC,and can it be changed in the STOCK ROM 4.4.2? If not do I need to downgrade the stock to 4.1.2?
That is the error I keep getting when I try and do anything in this app....

Did you try putting your original SPC in first?
Recovery FLASHABLE version now posted near the bottom of the first post of the 3Minit Battery Mod for Conquest-Singularity and both Stock ND8 and NDC with 1000+ animated battery icons..
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v7.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

roirraW "edor" ehT said:
Did you try putting your original SPC in first?
Recovery FLASHABLE version now posted near the bottom of the first post of the 3Minit Battery Mod for Conquest-Singularity and both Stock ND8 and NDC with 1000+ animated battery icons..
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v7.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
I am past that part I just need to know how to get the phone to recognize Straight talk

Please close this thread!!!

So how did you get your spc on nd8 4.4.2? Or did you downgrade to a different version?

No sound, please help me

UPDATE - I've updated to Fido 4.3 ofw via Odin (w/ Sammobile) . Still no sound, see the screenshot below
Phone is a Fido i747m
Hi guys, coming from Slimkat 4.1 tried to update to SR3x 4.4 and ended up back on v 4..3 with no sound.
Here's my (current) setup
>> Samsung Phone Info displays modem and bootloader versions matching - only the CSC has a different ID
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ba-dump

*ricochet*

ayyy lmao
/pls halp

Gizmosis350k said:
ayyy lmao
/pls halp
Click to expand...
Click to collapse
is this the thread you got it from? http://forum.xda-developers.com/showthread.php?t=2848080
if it is , is fido and rogers the same because fido is not mentioned in OP. (?). sorry not familiar with the canadian carriers.
also what is your bootloader version?
"all i can really do , is stay out of my own way and let the will of heaven be done"
---------- Post added at 07:02 AM ---------- Previous post was at 06:40 AM ----------
if problem is after connecting to bluetooth , then see this thread.
http://forum.xda-developers.com/showthread.php?t=2588361
you might also try getting a stock rom on your device from here. http://forum.xda-developers.com/showthread.php?t=2789917
"all i can really do , is stay out of my own way and let the will of heaven be done"

mrrocketdog said:
is this the thread you got it from? http://forum.xda-developers.com/showthread.php?t=2848080
if it is , is fido and rogers the same because fido is not mentioned in OP. (?). sorry not familiar with the canadian carriers.
also what is your bootloader version?
"all i can really do , is stay out of my own way and let the will of heaven be done"
---------- Post added at 07:02 AM ---------- Previous post was at 06:40 AM ----------
if problem is after connecting to bluetooth , then see this thread.
http://forum.xda-developers.com/showthread.php?t=2588361
you might also try getting a stock rom on your device from here. http://forum.xda-developers.com/showthread.php?t=2789917
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
>> Yeah, Fido is a part of the Rogers network, but sadly bootloader and modem files are different
Indeed, the first rom i installed was that same SR3x 4.0 (previously installed 3.0 on an AT&T S3 with no problems, that phone still works fine)
As you can see, my Bootloader version is now i747MVLUEMK5, which is the Fido variant of the 4.3.x Bootloaders.
At least, that's what phone info displays. I installed the 4.3 update directly from Sammobile using Odin 3.04
I noticed that the Bootloader and Phone files weren't directly included in the archive, so for these to be updated have me a bit skeptical.
The only time the phone makes any sound is when making a call, you can hear white (?) noise and static from the speakers.
I think this problem first started occuring when the phone was still on the 4.1 modem and bootloaders. I tried 2 OC bootloaders to get wifi functionality, but the sound never came back. All the deets are in the screenshot. S3rx comes with two OC kernels as well as a i747m kernel that i tried last silly me with that decision

what about flashing the latest cm11 nightly to see if you can at least get it back functioning.? sorry i dont have better answers.
"all i can really do , is stay out of my own way and let the will of heaven be done"

any ideas mr. @audit13 ? if have time.
"all i can really do , is stay out of my own way and let the will of heaven be done"

If you used the stock Rogers/Fido 4.3 firmware from sammobile and you flashed it, it should have flashed the modem and bootloader too. Try flashing again and post a screen shot of Odin.
SRX was designed for the ATT s3 and I could not get the SRX ROMs to work on an i747m.

thank you @audit13. i knew you'd have something.
"all i can really do , is stay out of my own way and let the will of heaven be done"

mrrocketdog said:
thank you @audit13. i knew you'd have something.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
audit13 said:
If you used the stock Rogers/Fido 4.3 firmware from sammobile and you flashed it, it should have flashed the modem and bootloader too. Try flashing again and post a screen shot of Odin.
SRX was designed for the ATT s3 and I could not get the SRX ROMs to work on an i747m.
Click to expand...
Click to collapse
I understand. I have a pic of my workbench before I get started.
I've realized that all the flashes I've done since I got the device were using a Philz Touch CWM designed for the d2att versions of the phone. The Rogers/Fido verison is under d2lte so i will also try to re-flash SRx3 to see if changing the kernel there will "unmute" the sound so I can use it again. I'm used to simple things turning into these sort of Maze Runner situations @@
>> Also wondering if I should hit the flash bootloader checkbox, even thoug im pretty sure it does that by default @@

Before unification of TWRP, CWM, and Philz for the msm8960, the files were either designed for the d2att (i747) or d2can (i747m). Everything was eventually unified under the d2lte because ROMs and recoveries could not be cross-flashed between the i747 and i747m with the exception of bootloaders, modems, and some kernels.
Flashing files designed for the d2can, other than bootloaders and modem, tells me the files are probably dated at this point.
I'm not sure if SRX includes a bootloader but, if it does, do not flash it.

audit13 said:
Before unification of TWRP, CWM, and Philz for the msm8960, the files were either designed for the d2att (i747) or d2can (i747m). Everything was eventually unified under the d2lte because ROMs and recoveries could not be cross-flashed between the i747 and i747m with the exception of bootloaders, modems, and some kernels.
Flashing files designed for the d2can, other than bootloaders and modem, tells me the files are probably dated at this point.
I'm not sure if SRX includes a bootloader but, if it does, do not flash it.
Click to expand...
Click to collapse
So most roms are safe for the i747m now? I see. I've installed both overclocking kernels from the SR3x v3.0/4, and it was shortly after that the sound went out, if not instantly. I'll be doing the Odin flash sometime this week, the phone's now on 4.3 so it's either Stay with JB or upgrade to the Kitkat Bootloader/Modem pack
I should also try grabbing a 4.3 Slimkat to see if that does any magic. That'd be disturbing though.

The safest way to install the latest modem and bootloader is by flashing back to stock 4.3 and running OTA updates until you are running the latest ROM and bootloader.
SRX is based on a TW ROM and i747 bootloader. I could not get the SRX ROM to work properly on an i747m and switching the kernel may not resolve the problem because you do not have the latest i747 bootloader.
All ROMs are safe for the i747m unless it is a ROM that is specifically based on a stock TW ROM. In this case, it can be hot or miss.
I recommend just using Odin to flash back to stock to at least see if the sound issue gets resolved.

audit13 said:
The safest way to install the latest modem and bootloader is by flashing back to stock 4.3 and running OTA updates until you are running the latest ROM and bootloader.
SRX is based on a TW ROM and i747 bootloader. I could not get the SRX ROM to work properly on an i747m and switching the kernel may not resolve the problem because you do not have the latest i747 bootloader.
All ROMs are safe for the i747m unless it is a ROM that is specifically based on a stock TW ROM. In this case, it can be hot or miss.
I recommend just using Odin to flash back to stock to at least see if the sound issue gets resolved.
Click to expand...
Click to collapse
Will do. I'll register for the Samsung updates to streamline the process. Thanks a lot in advance, I'm hoping for the best
Never knew TW could be this much of a problem, but then again, I think on the regular i747, TW was the sole cause of needing to touch modem/bootloader files in the first place
At this point better to install a launcher add root and be done with it. I'll have updates tomorrow