Hello Guys...
This is my first work on Symphony W90. It's TWRP 2.5.0.0 For Symphony W90.
Disclaimer:
Installing Custom Recovery For your Phone Voids warranty. I am not be Responsible For any
Damage or in any matter
Requirements:
Root and MOBILE UNCLE TOOLS APP
Instructions:
1.Download Mobileuncle Tools from attachment and install
2.Download the twrp2.5.0.0.zip extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash my recovery.img file
5.Done
6. To boot into recovery, power off the phone then hold VOLUME UP+POWER Button until the TeamWin logo is showed
Credits:
Bruno Martins & Yuweng
TeamWin for their amazing Recovery
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
This post is Intentionally left blank
any jb rom available
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
zamilhn said:
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
Click to expand...
Click to collapse
shamim0318 said:
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
Click to expand...
Click to collapse
I have one problem with your installation steps. My W90 has no volume buttons, so how to get into recovery mode?
this is a guide on how to root and install cwm on huawei g520 and other chinese mtk 6589 phones
IT HAS ONLY BE TESTED ON HUAWEI G520 but should work on any mtk 6589 (arm v7)
1.root your phone
mgyun vroot
2.download mobile uncle tools from playstore or other market source( availiable on xianzi market)
3.download g520-5000 recovery zip file and place it on your sd card
4.open mobile uncle tools and choose recovery update it will take you to the cwm image stored in your sd card and you can flash your new cwm
5.reboot into recovery from apk menu or by pressing volume up and power button
6.flash gapps and custom roms if you feel like it
enjoy
if you need custom roms for huawei g520 post a request here and i will direct you on where and how to
What about G520 with Snapdragon
I have a Huawei G520-0000. I think my model has a Snapdragon 400, while the G520-5000 has the mk you mention.
I managed to root it, unlock the bootloader and install Rom Manager.
I downloaded a MIUI rom
But there is no information about how to install it.
I found an alleged cwm for my phone called cofface_recovery_g520-0000_MobileX Firmware. The file is a .img, but I don't know how to install it for Rom Manager.
Any advice about how can I install the MIUI in the G520-0000 would be welcomed.
Thx
cris.huawei said:
this is a guide on how to root and install cwm on huawei g520 and other chinese mtk 6589 phones
IT HAS ONLY BE TESTED ON HUAWEI G520 but should work on any mtk 6589 (arm v7)
1.root your phone
mgyun vroot
2.download mobile uncle tools from playstore or other market source( availiable on xianzi market)
3.download g520-5000 recovery zip file and place it on your sd card
4.open mobile uncle tools and choose recovery update it will take you to the cwm image stored in your sd card and you can flash your new cwm
5.reboot into recovery from apk menu or by pressing volume up and power button
6.flash gapps and custom roms if you feel like it
enjoy
if you need custom roms for huawei g520 post a request here and i will direct you on where and how to
Click to expand...
Click to collapse
oh? Do you unlock the Bootloader ?
cris.huawei said:
this is a guide on how to root and install cwm on huawei g520 and other chinese mtk 6589 phones
IT HAS ONLY BE TESTED ON HUAWEI G520 but should work on any mtk 6589 (arm v7)
1.root your phone
mgyun vroot
2.download mobile uncle tools from playstore or other market source( availiable on xianzi market)
3.download g520-5000 recovery zip file and place it on your sd card
4.open mobile uncle tools and choose recovery update it will take you to the cwm image stored in your sd card and you can flash your new cwm
5.reboot into recovery from apk menu or by pressing volume up and power button
6.flash gapps and custom roms if you feel like it
enjoy
if you need custom roms for huawei g520 post a request here and i will direct you on where and how to
Click to expand...
Click to collapse
Where did you download the recovery file?
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Here's How ROOT and Flash Recovery on Your Phone Without Touching Your PC
Instructions:
-Download and Install Framaroot( v1.9.1 Tested to be Working !!!) HERE
-Open The App and Select SuperSu from Dropdown Menu and press Bahahir,It'll be ROOTED!!!
-Download and Install Mobile Uncle tools From Play Store (HERE)
-Download CTR v2.2 Recovery.img (HERE) and place it in your SDCard Directly (Don't place it inside any Folder)
-Open Mobile Uncle Tools, Select Recovery update, Select Recovery.img From there, Press OK And Then Reboot into Recovery Mode !!!
DONE!!! You've Successfully Flashed Recovery on Your Device!!!
KK users follow this for Rooting without PC
Step 1: Root Your Device
Android 4.4.x
Download Rooting Package (HERE)
The Package contains KingRoot, SuperSu and ES File Explorer
PS- Make sure to turn off data/WiFi while Rooting
Steps:
1. Download the Package and Install Kingroot App from there
2. Open the App and Press on the Green Button on It
3. When A Tick Mark Shows , It means you’re Rooted!!!
STEP 2: Flash Recovery on your device
-Find Custom Recovery (HERE) for your Device
-Download Rashr from Play Store
-Place downloaded recovery.img on your SDCARD
-Open Rashr and Select Recovery from Storage
-In that menu select the .img file and Select Yes, please
--Now Reboot to Recovery
-And You’re done!!!
Flashing Q1010i (4.4.2-KitKat Stock ROM through Recovery
Here's HOW To Flash 4.4.2 Stock ROM Through Recovery (JB n KK)
Instructions
-Make Sure You've Flashed CTR Recovery on Your Device (See Post 1 & 2 for More Details)
-Download Flashable Zip of Stock 4.4.2 ROM from (HERE)
-Download SuperSu Zip from (Here)
-Place Both the Files in Your SD Card, Goto Recovery Mode
-In Recovery Mode Go To Install ---> Install from SD ----> Select the ROM File and press YES to Flash it and Do the Same for the SuperSu Zip after Flashing completes
-Reboot and Enjoy !!!
Credits:
Ritesh Nair for the Stock 4.4.2 Zip
Download links
hi,
i have updated mine to kitkat and can not gain root access
can you upload the recovery and rom pls
HOW To Flash Stock ROM on Your Device Through SP TOOLS
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Thread Updated
Sent from my C2305 using Tapatalk
Thread Updated !!!!
Not working
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
-MT6582 Scatter File (HERE)
-CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
bgos10 said:
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Click to expand...
Click to collapse
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
XenonTNT said:
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
Click to expand...
Click to collapse
4.4.2 is rooted, 4.2.2 is not
Sent from my C2305 using Tapatalk
I got the fix while mobile is switch off we need to press volume up + power button after download button is pressed in sp tool to start downloading in mobile. Also to root on KitKat we need preloader file of kitkat also. So kindly upload it for other users I am downloading whole KitKat stock ROM.
The recovery does not seem to get flashed on JB stock rom. I tried with mobileuncletools...
it says reboot into recovery mode but simply restarts. may be working on kitkat but i have not tried. actually i did not really like the kitkat update. It takes away backup and restore app. and in exchange you get printing support and news widget which never gets the location. also messes up with Mifileexplorer and apex launcher. i have flashed TWRP and after taking backup of stock rom i can play with the kitkat update maybe...
thanks for the effort.
Thread Updated, now tested multiple times and new ctr recovery link added
please root xolo q1000 opus kitkat
q1000 opus is different from q1000.
q1000 opus has broadcom processor.
please root the kitkat build as the jb is rooted but kitkat has not been rooted by any dev
Help.. I'm still geting PMT error.. I also load prelaoder bin along with recovery.. But getting error.. Help .
My phone is rooted kitkat(4.4.2) ..i also pressed volume up and power button.. [emoji37][emoji24]
Sent from my Q1010i using Tapatalk
which is the most reliable method of rooting
framaroot or this method????
Root
Reconfigured said:
which is the most reliable method of rooting
framaroot or this method????
Click to expand...
Click to collapse
Farmaroot will not work after Kit Kat upadate. If you have stock Jelly Bean then use farmaroot method.
If you want rooted kitkat use this method.
Does not work on Xolo Q1010i with Android 4.4.2
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tried the step mentioned above more than couple of times but it does not work
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
kimerika said:
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
Click to expand...
Click to collapse
Ya unless the scatter is modified manually
I successfully rooted my phone. Thanks a lot. I wanted to change my phone's font cause I got bored of same old font.
Sent from my Q1010i using Tapatalk
flash twrp recovery without pc on nokia x/xl easily with flashify 1.7.3 version only
flashify on nokia x/xl are working fully with flashify 1.7.3 apk or from nokia store only
1.download flashify 1.7.3 version apk or download from nokia store only
link for flashify = http://www2.zippyshare.com/v/49598131/file.html
or u can downlaod from nokia store only
2.download twrp recovery img file for nokia x/xl
link for twrp - http://fs1.d-h.st/download/00116/Tn9/TWRP-2.7.0.2-normandy.img
after download
nokia x/xl only supports flashify 1.7.3 not other version
1.open flashify 1.7.3
2.grant root acces
3.click on flash recovery image & the twrp img file u are download
4.after select click on yup
5.click on reboot now u on twrp recovery
congrats u flashed twrp on your nokia x/xl without pc
You can also flash lewa,miui,cwm,philz etc recovery with flashify 1.7.3 version & with mentioned method
Also this flashify version is works on all mtk jelly bean based devices fully
link for flashify= http://www2.zippyshare.com/v/49598131/file.html
twrp img link= http://d-h.st/Tn9
If flashify link not works try this link= https://docs.google.com/uc?id=0B2YzqpZBy_EuQmVjeWw0UEV0dWs&export=download
Disclaimer
First of all, I'm not responsible for your phone getting bricked or whatever things could happen.
REQUIRED
USB cable
Phone charged at least on 60%
PC - Windows
Contents of the RAR:
Stock rom
SP Flash Tool
-----------------------------------------------------------------------------------------
INSTALLATION
1.Download the rar and unpack
2. download the MTK vcom/preloader driver
3.open a SP Flash Tool
4.load the scatter file from folder stock
5. click the download only and select format all + download
6.power of phone click download on flashtool and connect the phone
7.wait a few minute and that's all
-----------------------------------------------------------------------------------------
DOWNLOAD:
(Delete space after "https")
stock : https ://mega.nz/#!QJEiUAZQ!Xb_M8mUvf3_e4j9K3yApcpfatYwAYOIN40QehdLYr3Q