My ascend P6 had 4.2.2 version and I had run the TWRP CMD Installer V1.1.3b, unlock boot locker, jelley bean recover and working well. Finally, I had run install stock kitkat boot.img and my phone got stuck in Huawei logo,
Please someone help how to get out, I am pretty new to ascend phone and no idea at all, many thanks and greatly appreciated,
Related
So i got the 4.4 KitKat beta but didn't like it that all, couldnt get Gapps to because i dont have a SD card. Anyway so i downloaded B132N and used the UPDATE.APP method and everything was OK no error messages or nothing, and now my phone is stuck on Huawei logo. Any ideas?
\EDIT: I got it working again!!
Hi all,
please help me, even a factory reset did not work. After turned on, the Ascend logo will come on and it gets after Android logo appears. I have no experience with android, so as detailed iexplanations/ instructions as possible would be very very much appreciated!
thanks a lot!
Katrin
Nobody has any suggestion//? please!
I went to a shop and they couldnt tell me what the problem is.
You could try flashing a custom recovery via adb from a pc, I would suggest looking around at old p6 Q&A threads I did have an old thread with detailed instructions and links for all the old downloads, then try flashing another rom via the twrp recovery.
i Just Got My Phone Huawei p6 i just update to 4.4 and My Phone Get So Hot Some Of My friend Tell to downgrade It I just install an app in phone a root it and i use this app to install TWRP.My Phone Just Restarted and Stuck In Logo (Huawei ascend) I just get My Phone to rocovery mode to flash it with Dload Update and He Said Verlist FAIL
When I get My phone On the USB with pc get dEVICE ANDROID and i dont know How to flash Somone Can Help Please
So my phone got stuck into a bootloop after I tried to root it. I can get into the bootloader, but have no idea how fix it, can't access recovery or fastboot. I put a update.app on the micro sd and held the power, volume + and down put that was no use and phone is still stuck on the huawei ascend logo.
Please could some help out or give any tips!!
Thank you
What was your previous rom version - can you get the Update.app for that & try flashing it?
Worked for him/her: [Q] How to unbrick ( Hard brick P6)
GaT7 said:
What was your previous rom version - can you get the Update.app for that & try flashing it?
Worked for him/her: [Q] How to unbrick ( Hard brick P6)
Click to expand...
Click to collapse
I have no idea, I tried the update.app method but doesn't work and is still just stuck on the huawei ascend logo, and I can't access the recovery, only the bootloader
If not solved, try flashing the custom rom posted here: http://forum.xda-developers.com/showpost.php?p=45113553&postcount=5
Edit: Try this first if you can: http://forum.xda-developers.com/showpost.php?p=52306046&postcount=2
.
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Call Huawei customer support and get a ticket started to send your phone to the nearest repair center. Best of luck!
Waagic said:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Click to expand...
Click to collapse