Hi, i don't know what happened. I had CM 12 installed but then wanted to try Miui v6 so i downloaded it and flashed it but accidentally uninstalled gapps and WilKernel so the phone kept booting back to recovery without being able to flash any roms. So i followed this thread that told me to flash TWRP 2.6 and that it worked with any recovery ( I had 2.8 ) and now there's nothing that happens. I turn on my phone and and it stays on the LG logo. Can't get into download mode or anything and i'm scared to death right now since this is not my phone. Someone please help me !!
Renecito said:
Hi, i don't know what happened. I had CM 12 installed but then wanted to try Miui v6 so i downloaded it and flashed it but accidentally uninstalled gapps and WilKernel so the phone kept booting back to recovery without being able to flash any roms. So i followed this thread that told me to flash TWRP 2.6 and that it worked with any recovery ( I had 2.8 ) and now there's nothing that happens. I turn on my phone and and it stays on the LG logo. Can't get into download mode or anything and i'm scared to death right now since this is not my phone. Someone please help me !!
Click to expand...
Click to collapse
Are you sure you can't get into download mode? Have you tried pulling out the battery and wait for a while before trying again?
I actually unbricked it with LG flash tool, the only problem now is that it's stuck on JB..
Tried to flash a custom rom using a rom loader on the phone, said rom flashing was succesfull and it will reboot.
Phone rebooted and now is stuck on the Huawei Ascend logo, computer cannot detect it.
I put on some firmware files from the Huawei site on the SD card, but it does not seem to be working.
Any help is very much apreciated, I just need it to be working (even wiped clean) by tomorrow.
Thank you for your advice
XDA Visitor said:
Tried to flash a custom rom using a rom loader on the phone, said rom flashing was succesfull and it will reboot.
Phone rebooted and now is stuck on the Huawei Ascend logo, computer cannot detect it.
I put on some firmware files from the Huawei site on the SD card, but it does not seem to be working.
Any help is very much apreciated, I just need it to be working (even wiped clean) by tomorrow.
Thank you for your advice
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user.
Your question/post is being moved to the Ascend P6 forum, specific for your device and problem. After you have registered, you can respond, and post additional questions.
One of our experts will assist you.
Good Luck
XDA Visitor said:
Tried to flash a custom rom using a rom loader on the phone, said rom flashing was succesfull and it will reboot.
Phone rebooted and now is stuck on the Huawei Ascend logo, computer cannot detect it.
I put on some firmware files from the Huawei site on the SD card, but it does not seem to be working.
Any help is very much apreciated, I just need it to be working (even wiped clean) by tomorrow.
Thank you for your advice
Click to expand...
Click to collapse
Tried the update.app method, tried recovery mode, tried everything.
Looking for a way to wipe it clean and install the android 4.4.2 or 4.2 on boot like a new computer.
I can provide pictures if needed.
EDIT: I think if I can wipe the internal storage and the files from the SD card it would work, but I have no way to acces the internal storage, help?
hi dev.
My lg g3 d851 is rooted..and i want to flash roms in it.. so i heared that i have to be rooted.and cwm installed.i did successfully rooted my device.. and downloaded the twrp as my varient is d851 . to flash it i hae to download flashify .it opened and flashed the recovery successfully.after that it prompted me to reboot. as i did .LG logo came up and wih the blink of an eye it disappeared and black screen came up with a micro text line saying [780] fastboot adb started.
when i tried to manually go through the recovery mode. i did hold down the volume down button and held the power button. as the LG logo appeared i released for half a sec and then quickly presssed it again. but it again said something with the micro text.. i am searching here and there on the internet .it is my favourite forum ( XDA ) it was helpfull for me with every other phone i've used but this time im getting no Help..
my current android version is KitKat 4.4.2
Software version is D85110f
Build Number is KT49L.D85110f
Rooted.
Kindly Help me
I didn't even have stock recovery nor the TWRP.
Kindly Help me ASAP.....
GeekYagami said:
hi dev.
My lg g3 d851 is rooted..and i want to flash roms in it.. so i heared that i have to be rooted.and cwm installed.i did successfully rooted my device.. and downloaded the twrp as my varient is d851 . to flash it i hae to download flashify .it opened and flashed the recovery successfully.after that it prompted me to reboot. as i did .LG logo came up and wih the blink of an eye it disappeared and black screen came up with a micro text line saying [780] fastboot adb started.
when i tried to manually go through the recovery mode. i did hold down the volume down button and held the power button. as the LG logo appeared i released for half a sec and then quickly presssed it again. but it again said something with the micro text.. i am searching here and there on the internet .it is my favourite forum ( XDA ) it was helpfull for me with every other phone i've used but this time im getting no Help..
my current android version is KitKat 4.4.2
Software version is D85110f
Build Number is KT49L.D85110f
Rooted.
Kindly Help me
I didn't even have stock recovery nor the TWRP.
Kindly Help me ASAP.....
Click to expand...
Click to collapse
Personally i don't really like flashify or any other similar apps.But as you are a beginner at all these follow this simple steps.
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.[/QUOTE]
Yes i can Boot my phone.and i have also tried the official twrp app..but still when i boot into recovery it says fastboot mode started
GeekYagami said:
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.
Click to expand...
Click to collapse
Yes i can Boot my phone.and i have also tried the official twrp app..but still when i boot into recovery it says fastboot mode started[/QUOTE]
Try re-flashing your Stock ROM.
Dude how can i reflash.. when i can't get to recovery mode or downloading mode..? how is it possible to flash anything just like that
.
GeekYagami said:
Dude how can i reflash.. when i can't get to recovery mode or downloading mode..? how is it possible to flash anything just like that
.
Click to expand...
Click to collapse
I'll link you and a guide on how to reflash dl mode.
Edit: Here https://forum.xda-developers.com/lg-g3/help/how-to-lg-g3-download-mode-stuck-t3325120
First of all thanx man for bieng there.
secondly i've already did it the link procedure says..i successfully flashed laf.img but still im in fastboot mode. i just wanna know my varient is D85110f and i think thats the only problem i can't find laf.img for 10f there are 10c 10m 10r but no 10f even on the whole internet i searched here and there but couldn't find files for 10f what should i do. i cant access the download mode. i dont have recover. i even curropted my stock recover. i can't even go the factory reset mode.. but my phone is working like a charm no issue no problem.. every thing is working flawlessly . but still i need the download mode,stock recovery,and custom recovery. my software version is D85110f the (F) is the f++king problem. 've flashed 10C laf.img with no issue. what to do man. seriously its killing me inside.. help me.ASAP.
GeekYagami said:
First of all thanx man for bieng there.
secondly i've already did it the link procedure says..i successfully flashed laf.img but still im in fastboot mode. i just wanna know my varient is D85110f and i think thats the only problem i can't find laf.img for 10f there are 10c 10m 10r but no 10f even on the whole internet i searched here and there but couldn't find files for 10f what should i do. i cant access the download mode. i dont have recover. i even curropted my stock recover. i can't even go the factory reset mode.. but my phone is working like a charm no issue no problem.. every thing is working flawlessly . but still i need the download mode,stock recovery,and custom recovery. my software version is D85110f the (F) is the f++king problem. 've flashed 10C laf.img with no issue. what to do man. seriously its killing me inside.. help me.ASAP.
Click to expand...
Click to collapse
I see that you have messed a lot with your system partitions.
I'll try to find something helpful.
Till then try checking if you can use system upgrade.(To go for example to lollipop while it may save your phone and also be able to flash the correct laf.img)
Question:After you finished the procedure on flashing the laf.img(for d851)(also you can flash the 10d laf.img as the OP said in the guide)did you pull the battery out and Boot to download mode(manually)?
How to get to Download Mode
yes i did try to boot into dl mode manually..
GeekYagami said:
yes i did try to boot into dl mode manually..
Click to expand...
Click to collapse
You also did pull the battery after flashing laf.img(10d) for D851 Model?
So... I think that after you tried doing all these and nothing worked, you'll be unable to get Download mode back,but let me check some of the system partitions and check if you can manually insert the laf.img file.
Somehow you can insert the laf file to your phone but it needs extracting (the laf.img) to get the proper file.
I found the location of the laf file.
But if anyone can be found with D851 can send the laf file here for you.
Two other solutions are:
1.Staying without dl mode? Maybe.
2.Buying a new motherboard.
Links to LAF files in this post:
https://forum.xda-developers.com/lg-g3/help/how-to-lg-g3-download-mode-stuck-t3325120
Specifically, here's the download site for stock partitions:
http://downloads.codefi.re/autoprime/LG/LG_G3/D851/stock_partitions
hey there ...
mate there is some serious trouble im into.. my software said its D851 but when i opened the case i've found LS990 on the motherboard.my phone is now in Qualcomm HS-USB Qdload 9008 mode..what should i do now.. help me on this..i've tried board diag its says device not found in dload mode try flsh programmer.something like that.. what to do i've bricked my phone..and the repairing guy is asking for around 90$.. what should i do now..
Try using the LAF for the LS990, here:
http://downloads.codefi.re/autoprime/LG/LG_G3/LS990
I'm not familiar with the Qdload mode, or what to do there, so sadly other's will have to help you out.
@GeekYagami
Check here:
https://forum.xda-developers.com/lg-g3/help/how-to-hard-unbricked-lg-g3-variants-t3394575
It discusses the mode you seem to be in.
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
HEllo could help my on teamviewer?
seser111 said:
HEllo could help my on teamviewer?
Click to expand...
Click to collapse
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
djgilquirino said:
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
Click to expand...
Click to collapse
It's hard bricked. I tried sp flash tool it requires authorized account.
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
TheMalachite said:
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
Click to expand...
Click to collapse
That's the problem. I didn't know why I bricked my phone while flashing A9. It just didn't boot after rebooting my phone. I think as long as you flashed A9, you can proceed to flash the preloader and lk and unbrick it.
Same pproblem
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
I have same problem like you. How did you flash when your RM8P is hard brick? I try same things like youtube, but my cmd windows just close immediately. And if I move fastboot tool in the rom folder, cmd window didn't close but doing nothing. How did you do that?
My RN8P don't have recovery or fastboot.
thanks
thank you very much, my phone is resurrected. ?❤
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Benedict Cumberbatch said:
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Click to expand...
Click to collapse
Well I pointed out that it was just a possible way and not an absolute way on unbricking my phone. And I guess you're right about my phone being softbricked and I apologize for that mistake. Cheers
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
In soft bricks, you can access recovery or fastboot or both, and easily flash the stock ROM, but you have mentioned above that your phone was hard bricked, there is almost no way to unbrick a hard bricked RN8P without authorized account, even if you do, its very likely it was once in a million chance that it got flashed, best way to recover a hard bricked RN8P is to not mess it up more and take it to service center right away.
Help please!!
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond. :crying::crying:
---------- Post added at 12:50 PM ---------- Previous post was at 12:37 PM ----------
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Hey, my redmi 4a is soft bricked, please guide me how to fix it. I'm like a noob, so i need A to Z guide
Hey my
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
Hey, my redmi 4a is soft brick,
Can you guide me from beginning?
megaros said:
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Click to expand...
Click to collapse
Would you be so kind as to maybe PM that # to me? Ive been trying to get mine unbricked for probably over a year now and havent had any luck even finding a place or person to do the unlock.... I would really appreciate it...
U mnie zadziałał ten sposób
.
namurnik said:
U mnie zadziałał ten sposób
.
Click to expand...
Click to collapse
No widze ze dobrze to wyglada , powiedz mi tylko czy miales naprawde HARDBRICK , czy tylko SOFTBRICK , ?
Well I see it looks good, just tell me if you had a really HARDBRICK or just a SOFTBRICK?