[Q] P6 Stuck on Huawei logo. - Huawei Ascend P6, Mate

So i got the 4.4 KitKat beta but didn't like it that all, couldnt get Gapps to because i dont have a SD card. Anyway so i downloaded B132N and used the UPDATE.APP method and everything was OK no error messages or nothing, and now my phone is stuck on Huawei logo. Any ideas?
\EDIT: I got it working again!!

Related

[Q] How to Revive a Huawei Y300-0100?

Hi, i didn't know where to post so i just posted this here since i saw other huawei posts in here. (Moderators pls move if misplaced).
I've got a big problem!
I have got a Rooted Huawei Y300 and i've unofficially unlocked the bootloader with DC-Unlocker successfully, and have CWM Recovery installed!
Now here's the deal, i've downloaded Cyanogenmod 11 (4.4) but after i tried to install it, it stopped halfway with "set_metadata_recursive: some changes failed E:Error in /sdcard/name_of_rom_here" (Status 7).
I tried other CM's getting the same error.
Than i tried to reflash to original firmware (V100R001C00B175) from the huawei website, but since i bricked my phone i cannot move the "dload" folder to internal storage so i tried to place it on my sd-card and booting up using Vol- & Power, the upgrade stops at step 2/2 saying it failed.
I'm very sorry not having a backup of the original firmware before i tried CM out (a very stupid and hasty move).
Does anyone have a solution? The phone is just a week old and i've never bricked a phone before (all my old handsets from samsung's to sony's / htc's) and never failed installing a rom or anything related.
Frankly i never suspected CM to fail flashing since everybody else is succesfull ;-/
kind regards,
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
bricked huawei y300
JMailuhu said:
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
Click to expand...
Click to collapse
can you provide instructions on how revive? mine bricked it got stuck on boot logo after succesfully rooting then i installed chainfire 3d but after that when it reboots it got stuck on boot logo plsss help me on this..

MT1-U06 stuck on boot..after costum rom ?

Hello,
I bought this phone today from a guy 2nd handed but 2months old or so...
When i was at home i wanted a costum rom since it was running on 4.1.2 and installing a costum rom was a completely mistake i guess...
So decided to back to a stock frimware which i download from Huawei offical site and put on my SD card dload>update.app after going into recovery mode he loads all the files until system after my phone closes his self and most of time he doesnt go out of boot on the huawei logo for what i waited was 30min 2-3times...
What do i wrong..i've used samsung and that was much easier
Please help me someone whit this problem and i hope i could explain it good

Huawei ascend p6 Wont turn on, nothing works

Tried to flash a custom rom using a rom loader on the phone, said rom flashing was succesfull and it will reboot.
Phone rebooted and now is stuck on the Huawei Ascend logo, computer cannot detect it.
I put on some firmware files from the Huawei site on the SD card, but it does not seem to be working.
Any help is very much apreciated, I just need it to be working (even wiped clean) by tomorrow.
Thank you for your advice
XDA Visitor said:
Tried to flash a custom rom using a rom loader on the phone, said rom flashing was succesfull and it will reboot.
Phone rebooted and now is stuck on the Huawei Ascend logo, computer cannot detect it.
I put on some firmware files from the Huawei site on the SD card, but it does not seem to be working.
Any help is very much apreciated, I just need it to be working (even wiped clean) by tomorrow.
Thank you for your advice
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user.
Your question/post is being moved to the Ascend P6 forum, specific for your device and problem. After you have registered, you can respond, and post additional questions.
One of our experts will assist you.
Good Luck
XDA Visitor said:
Tried to flash a custom rom using a rom loader on the phone, said rom flashing was succesfull and it will reboot.
Phone rebooted and now is stuck on the Huawei Ascend logo, computer cannot detect it.
I put on some firmware files from the Huawei site on the SD card, but it does not seem to be working.
Any help is very much apreciated, I just need it to be working (even wiped clean) by tomorrow.
Thank you for your advice
Click to expand...
Click to collapse
Tried the update.app method, tried recovery mode, tried everything.
Looking for a way to wipe it clean and install the android 4.4.2 or 4.2 on boot like a new computer.
I can provide pictures if needed.
EDIT: I think if I can wipe the internal storage and the files from the SD card it would work, but I have no way to acces the internal storage, help?

LG G3 strange problem

hello everyone, my D855 have been running cm13 fo a couple of months now. I usually update nightlies every couple of weeks or so.
Today, my phone just rebooted ( which happens sometimes) but this time it's stuck in the LG logo..
So, I went to recovery ( 2.8.6.0) and wiped everything except SD card, then when I tried to flash the rom the phone just rebooted as soon as the installation began... I tried again with different roms (I even tried fulmics) but the same problem persists; the phone reboots as soon as the flashing process begins ( exactly after the line "patching system image unconditionnaly" )
I even tried updating recovery to 3.0.0.2 and again the same problem.
Here is what strange, I tried to move the rom zip from the SD card to internal storage with the twrp file manager , but as soon as the copy starts the phone reboots and hang in the LG logo...
I was thinking maybe my internal storage is damaged ( is that a thing on smartphones ? )
will installing the v30B kdz solve the problem ?
Please I need an answer. THANKS
note : recovery and download mode are accessible
D855 16GB
You may try flashing a KDZ or TOT.
If it doesn't work it may be that your phone is damaged.
Sent from my phone

Huawei p6 bootloop after root attempt!

So my phone got stuck into a bootloop after I tried to root it. I can get into the bootloader, but have no idea how fix it, can't access recovery or fastboot. I put a update.app on the micro sd and held the power, volume + and down put that was no use and phone is still stuck on the huawei ascend logo.
Please could some help out or give any tips!!
Thank you
What was your previous rom version - can you get the Update.app for that & try flashing it?
Worked for him/her: [Q] How to unbrick ( Hard brick P6)
GaT7 said:
What was your previous rom version - can you get the Update.app for that & try flashing it?
Worked for him/her: [Q] How to unbrick ( Hard brick P6)
Click to expand...
Click to collapse
I have no idea, I tried the update.app method but doesn't work and is still just stuck on the huawei ascend logo, and I can't access the recovery, only the bootloader
If not solved, try flashing the custom rom posted here: http://forum.xda-developers.com/showpost.php?p=45113553&postcount=5
Edit: Try this first if you can: http://forum.xda-developers.com/showpost.php?p=52306046&postcount=2
.

Categories

Resources