[Q] Most current stock ROM? - Sprint Samsung Galaxy S III

I'm trying to upgrade from an older version of MOAR to the most current stock ROM so I can get rid of the update notification. I have already made the mistake of accepting the OTA update that had Knox in it and subsequently tripped the Knox bit, so I'm wanting to be careful about what I do to ensure I don't brick the phone. I have downloaded the stock ND8 ROM and attempted to Odin it in, but the update failed, which I'm assuming is a result of Knox for some reason or another. The question is, is ND8 the most current ROM? If not, what is the most current stock ROM so I can get that to work with, and if so, how can I install this with Knox in place?

treblesum81 said:
I'm trying to upgrade from an older version of MOAR to the most current stock ROM so I can get rid of the update notification. I have already made the mistake of accepting the OTA update that had Knox in it and subsequently tripped the Knox bit, so I'm wanting to be careful about what I do to ensure I don't brick the phone. I have downloaded the stock ND8 ROM and attempted to Odin it in, but the update failed, which I'm assuming is a result of Knox for some reason or another. The question is, is ND8 the most current ROM? If not, what is the most current stock ROM so I can get that to work with, and if so, how can I install this with Knox in place?
Click to expand...
Click to collapse
ND8 is the latest for Sprint http://forum.xda-developers.com/showthread.php?t=2738533 NDC is the latest for Boost/Virgin http://forum.xda-developers.com/showthread.php?t=2774333

Knox will not prevent you from Odining anything. If you try to Odin any stock ROM older than what the version of your bootloader is, the phone will brick, but you can Odin the stock ND8 tar all you want. You may or may not know this, but be sure to unzip what you downloaded because the tar file is inside.
You can also (separately) Odin recoveries like the very latest Philz Touch Recovery tar.md5, and which is the only one known to work 100% under TouchWiz 4.4.2 on the SPH-L710.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v4.4, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

6th_Hokage said:
ND8 is the latest for Sprint http://forum.xda-developers.com/showthread.php?t=2738533 NDC is the latest for Boost/Virgin http://forum.xda-developers.com/showthread.php?t=2774333
Click to expand...
Click to collapse
roirraW "edor" ehT said:
Knox will not prevent you from Odining anything. If you try to Odin any stock ROM older than what the most version of your bootloader is, the phone will brick, but you can Odin the stock ND8 tar all you want. You may or may not know this, but be sure to unzip what you downloaded because the tar file is inside.
You can also (separately) Odin recoveries like the very latest Philz Touch Recovery tar.md5, and which is the only one known to work 100% under TouchWiz 4.4.2 on the SPH-L710.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v4.4, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
I did unzip the download to get at the tar.md5 inside. That's what's failing to work with Odin. What is the most current version of Odin? I've been working with 3.04, but I'm not sure if that will work with the newer ROMs, though this has never been an issue in the past, so I doubt this is the problem.

treblesum81 said:
I did unzip the download to get at the tar.md5 inside. That's what's failing to work with Odin. What is the most current version of Odin? I've been working with 3.04, but I'm not sure if that will work with the newer ROMs, though this has never been an issue in the past, so I doubt this is the problem.
Click to expand...
Click to collapse
i have Odin 3.09
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539

6th_Hokage said:
i have Odin 3.09
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Click to expand...
Click to collapse
It appears that there are no download links, or at least none that I could find, on that thread...

treblesum81 said:
It appears that there are no download links, or at least none that I could find, on that thread...
Click to expand...
Click to collapse
http://www18.zippyshare.com/v/71513103/file.html

TheKryptonite said:
http://www18.zippyshare.com/v/71513103/file.html
Click to expand...
Click to collapse
Thank you, I'll give this a try and hopefully it will work.

TheKryptonite said:
http://www18.zippyshare.com/v/71513103/file.html
Click to expand...
Click to collapse
FYI, I prefer (and successfully use with ND8) v3.07 because for some reason it allows me to uncheck the auto reboot checkbox after loading the tar, but with v3.09 it stayed grayed out. I didn't investigate if that's configurable via the ini file.
Another thought. With just one other person the problem was what they used to unzip it. What did you use? Whichever it was, try something else like 7-zip, or 7-archiver on the phone.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

roirraW "edor" ehT said:
FYI, I prefer (and successfully use with ND8) v3.07 because for some reason it allows me to uncheck the auto reboot checkbox after loading the tar, but with v3.09 it stayed grayed out. I didn't investigate if that's configurable via the ini file.
Another thought. With just one other person the problem was what they used to unzip it. What did you use? Whichever it was, try something else like 7-zip, or 7-archiver on the phone.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
Turns out the error was located between the chair and the keyboard.... I had built a new computer since the last time I had used Odin, as a result, I completely spaced the need to run it as an administrator...

Related

Rooting with towelroot?

As the title says, can the Sprint S3 be routed using towelroot and not trip Knox?
code101 said:
As the title says, can the Sprint S3 be routed using towelroot and not trip Knox?
Click to expand...
Click to collapse
Yes, it has been confirmed that rooting work towelroot does not trip Knox. But once you root, if you flash custom recovery, you will.
Sent from my SM-G900P using XDA Free mobile app
Awesome. Thanks for the reply.
jdsingle76 said:
Yes, it has been confirmed that rooting work towelroot does not trip Knox. But once you root, if you flash custom recovery, you will.
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
really how do i check if i tripped it since i used the towel root method and odin to get Philiz Touch..........cause i don't think i tripped it
6th_Hokage said:
really how do i check if i tripped it since i used the towel root method and odin to get Philiz Touch..........cause i don't think i tripped it
Click to expand...
Click to collapse
Boot to Download mode and see if it says Warranty = 1. 1 is tripped, 0 (zero) is not tripped.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
roirraW "edor" ehT said:
Boot to Download mode and see if it says Warranty = 1. 1 is tripped, 0 (zero) is not tripped.
Click to expand...
Click to collapse
I'll bite. If it's tripped, then what? because this appears to be what I've done to my SPH-L710, build L710VPUDND8.
I rooted with towelroot, installed supersu 2.01, installed root checker, and then clockworkmod ROM Manager 5.5.3.7. root checker says I have root. when supersu runs, it asks if I want it to try to disable knox. I say yes, and after 5 minutes, it's still trying. I figure that after 5 minutes if it hasn't been successful, it never will. If I try running something like root explorer to search for files called "knox", it also produces nothing after 5 minutes or more.
WizzyNoise said:
I rooted with towelroot, installed supersu 2.01, installed root checker, and then clockworkmod ROM Manager 5.5.3.7. root checker says I have root. when supersu runs, it asks if I want it to try to disable knox. I say yes, and after 5 minutes, it's still trying. I figure that after 5 minutes if it hasn't been successful, it never will. If I try running something like root explorer to search for files called "knox", it also produces nothing after 5 minutes or more.
Click to expand...
Click to collapse
Well since I did the same method minus ROM manager.... I tried disabling Knox with the su app and it took forever so I rebooted my s3 via power menu then tried again with su app then it worked and to my knowledge Knox is disabled
Sent from my SGH-I997 using XDA Premium 4 mobile app
6th_Hokage said:
Well since I did the same method minus ROM manager.... I tried disabling Knox with the su app and it took forever so I rebooted my s3 via power menu then tried again with su app then it worked and to my knowledge Knox is disabled
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And this apparently is an important difference, according to jdsingle.
WizzyNoise said:
I'll bite. If it's tripped, then what?
Click to expand...
Click to collapse
If it's tripped and you still are under the Samsung first year warranty, then they probably won't fix it because the warranty is invalid. That's the only caveat if it being tripped. Reported by many Sprint and Best Buy will still cover it unset extended warranty and don't even look at the Knox status.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
?
Work with nd8 without tripping knox?
Cesg said:
Work with nd8 without tripping knox?
Click to expand...
Click to collapse
Read the second post of this thread.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Work Great
Root ND8 without tripping knox. Thanks.

[Q] Time to update ROM with Knox bit tripped, how to avoid a brick

So back in December while updating to the newest version of MOAR, I made this mistake of taking the OTA update and getting Knox. I managed not to brick my phone at the time, but ended up with the Knox bit tripped and a lot of concern that further experimenting would result in a dead phone and a forced replacement. Anyway, fast forward to now and its time to update again (some apps are starting to get unstable because they have been updated but my ROM hasn't), but I want to make sure I don't risk bricking the phone thanks to Knox.
If I remember correctly, the fact that I'd contracted Knox and tripped the bit already meant that I was stuck with the same bootloader, but I could update everything else. Is this still the case, or has someone figured a way around the issue in the past six months so that I can get rid of Knox once and for all? Also, since I haven't looked at any of this in the last 7 months, what exactly would the process be to update to the newest version of MOAR without updating the bootloader (if that's still what needs to happen)?
Thanks
You can downgrade everything but bootloader and modem. You can upgrade everything.
Flashing custom ROMs don't include bootloaders or modems, so have no fear. Only Odining the stock ROM, taking an OTA, or specifically finding a way to flash those upgrade them.
Just flash the latest MOAR or whatever other ROM you want to, as always.
The only exception to this is to flash ND8 (TouchWiz 4.4.2) based ROMs you need to have taken the ND8 OTA or Odined the stock ND8 tar first, otherwise you may brick your phone.
You're welcome!
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
roirraW "edor" ehT said:
You can downgrade everything but bootloader and modem. You can upgrade everything.
Flashing custom ROMs don't include bootloaders or modems, so have no fear. Only Odining the stock ROM, taking an OTA, or specifically finding a way to flash those upgrade them.
Just flash the latest MOAR or whatever other ROM you want to, as always.
The only exception to this is to flash ND8 (TouchWiz 4.4.2) based ROMs you need to have taken the ND8 OTA or Odined the stock ND8 tar first, otherwise you may brick your phone.
You're welcome!
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
Ok, with all of that said, the ND8 is an upgrade, so if I Odin it in, I should still be fine? I really hate that this is even an issue... I am thinking of jumping ship from the company's products when I upgrade next specifically as a result of this
treblesum81 said:
Ok, with all of that said, the ND8 is an upgrade, so if I Odin it in, I should still be fine? I really hate that this is even an issue... I am thinking of jumping ship from the company's products when I upgrade next specifically as a result of this
Click to expand...
Click to collapse
Yes, you can upgrade everything.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
treblesum81 said:
Ok, with all of that said, the ND8 is an upgrade, so if I Odin it in, I should still be fine? I really hate that this is even an issue... I am thinking of jumping ship from the company's products when I upgrade next specifically as a result of this
Click to expand...
Click to collapse
The only valid arguments against Knox (IMHO) are:
1. Once the warranty counter is tripped there is no way to reset it.
2. You do not have the ability to downgrade modems/bootloaders.
Myself, rode warrior and many others have had no issues directly related to Knox....
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
g_money said:
The only valid arguments against Knox (IMHO) are:
1. Once the warranty counter is tripped there is no way to reset it.
2. You do not have the ability to downgrade modems/bootloaders.
Myself, rode warrior and many others have had no issues directly related to Knox....
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
The problem is the way in which those issues manifested. Samsung essentially slipped Knox into the update almost without warning and with virtually no documentation. As a result many of those who were affected found out about it as a result of a bricked phone which was now permanently marked as ineligible for warranty work. Had Samsung made it clear what Knox was capable of and provided proper documentation of its function then I don't think many people would have had any problems with it.
Sent from my SPH-L710 using XDA Free mobile app

Root 4.4.2 official rom beside CF-Auto-Root.

Hi all.
I was trying to root my stock 4.4.2 rom on Sprint sph-l710 phone with CF-Auto-Root with Odin. Root Check indicate no root propertly After device reboot and Odin indicated Pass. And SuperSu show "Unfortunately SuperSu has stopped every when try to run superSu.
Are there anyway root stock 4.4.2 rom beside CF-Auto-Root?
May a flash able rooted stock 4.4.2 rom??
Tekone said:
Hi all.
I was trying to root my stock 4.4.2 rom on Sprint sph-l710 phone with CF-Auto-Root with Odin. Root Check indicate no root propertly After device reboot and Odin indicated Pass. And SuperSu show "Unfortunately SuperSu has stopped every when try to run superSu.
Are there anyway root stock 4.4.2 rom beside CF-Auto-Root?
May a flash able rooted stock 4.4.2 rom??
Click to expand...
Click to collapse
I'm in the same boat, I've been trying all day to get this to work. None of the Jelly Bean guides seem to work on 4.4.2. I just tried flashing the SuperSu via the recovery with no luck. Hope someone helps out, my Super keeps giving that message.
I install Philz recovery and root from from there and install supersu work better then cf auto root.
Is any downside by rooting this way?
Tekone said:
I install Philz recovery and root from from there and install supersu work better then cf auto root.
Is any downside by rooting this way?
Click to expand...
Click to collapse
No.
And there are at least 4-5 rooted TouchWiz 4.4.2 stock-based ROMs including @CNexus' completely stock but rooted in the development (non-original) section.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
roirraW "edor" ehT said:
No.
And there are at least 4-5 rooted TouchWiz 4.4.2 stock-based ROMs including @CNexus' completely stock but rooted in the development (non-original) section.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v2.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
Thanks for reply..
Since i have latest Philz recovery installed and do i have to worry about Radio, Bootloader, Traigle, Modem if I try to install custom rom etc?? I'm going to this S3 with Freedompop
Tekone said:
Thanks for reply..
Since i have latest Philz recovery installed and do i have to worry about Radio, Bootloader, Traigle, Modem if I try to install custom rom etc?? I'm going to this S3 with Freedompop
Click to expand...
Click to collapse
You're welcome. Nope, nothing to worry about since you were already on stock 4.4.2 and using latest Philz. Just flash any of the custom or completely stock (but rooted) ROMs you want.
roirraW "edor" ehT said:
You're welcome. Nope, nothing to worry about since you were already on stock 4.4.2 and using latest Philz. Just flash any of the custom or completely stock (but rooted) ROMs you want.
Click to expand...
Click to collapse
Thanks again bro.
Just checked my bootloader is ND8.. From now no.. i can flash any custom rom, hacking and do many thing now. thanks.

Network Unavailable ND8

Hi all, I flashed the stock tar via ODIN then Philz recovery, everything loads and installs fine it seems. My wifi works as well as everything else however, I have not had any cell phone service at all. when I go to setting->self activate it says network unavailable. I've tried to do a reset and all to get the phone to turn on the network but I am not sure what it blocking my phone from gaining any type of network access. I'm not sure where to go from here, the Stock ROM unrooted as well as Custom ROMs have provided the same no service results. I hope someone is able to help me I know I didn't provide a lot of information but I've followed all of the ND8 and Restore guides that I could find down to every last detail and cannot seem to get this to work, After 5 days of trying I feel it is worth asking you all seperately because any searchs have only shown users with both wifi and network connectivity problems.
Thank you all so much!
Kennan Miller
Sprint, Boost or Virgin Mobile? Did you check the MD5 hash of the zip or tar? Did you try the Odin multiple times and without changing anything, not even custom recovery? By reset you mean ##72786# from the stock dialer? After the reset did you try update profile and PRL? Try the NDC tar instead of ND8, especially if you're on Boost or Virgin Mobile.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
I havent tried the reset with the numbers, i kept looking for the code and could not find the proper one for my carrier, but that is the sprint one. I have a Sprint phone, I'll do some searching on what the NDC is, I have not heard of that before.
Edit: yes, I checked the md5 before anything i flashes through odin or recovery etc. . i've done the update for PRL and profile
Thank you for the response! Kennan
kcmiller82 said:
I havent tried the reset with the numbers, i kept looking for the code and could not find the proper one for my carrier, but that is the sprint one. I have a Sprint phone, I'll do some searching on what the NDC is, I have not heard of that before.
Edit: yes, I checked the md5 before anything i flashes through odin or recovery etc. . i've done the update for PRL and profile
Thank you for the response! Kennan
Click to expand...
Click to collapse
You're welcome! Try the data reset first. After that it's normal to do an update PRL and Profile. NDC is TouchWiz 4.4.2 for Boost and Virgin Mobile, ND8 is the same for Sprint, which should be what you Odined.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Hey! I'm sorry it took so long to respond back , I don't live in an area where I have service I had to drive into town so I could test it out! The code worked and I received service! however, I did not have any data/3g . I'm fairly confident when I have been to that town previously I had 3G, Does anyone have recommendations for that issue if it doesn't come back? sorry for seeming so needy, I would just like a few things to possibly try because unfortunately I have to make a trip into town everytime I need to see if I have service
Thank you all so much!!
Kennan
You didn't mention if you updated your PRL and Profile after the data reset. Try that if you didn't.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

[Q] Help rootin my spring sgs3 4.4.2

I went through all these steps with no success at rooting:
1. Turned on developer mode.
2. enabled usb debugging
3. booted into download mode (Vol down/home/power).
4. started odin 3.0.7
5. left autoreboot and reset time checked.
6. pressed "bin" and selected the "CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5" file
7. clicked start and let it reboot.
I've also tried unchecking autoreboot and after odin was finished, pulled out the battery and rebooted manually. Why can I not get root access? Please help!
CF-AutoRoot has only worked on TouchWiz 4.4.2 for a few people. Most of us either flash the latest SuperSU.zip downloaded directly from Chainfire's website or use Philz Touch Recovery's re-root option in the Advanced menu I think.
Personally, after CF-AutoRoot failed for me I had to re-Odin either (I forget which) the stock ROM and Philz, or just Philz.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v6.3, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
roirraW "edor" ehT said:
CF-AutoRoot has only worked on TouchWiz 4.4.2 for a few people. Most of us either flash the latest SuperSU.zip downloaded directly from Chainfire's website or use Philz Touch Recovery's re-root option in the Advanced menu I think.
Personally, after CF-AutoRoot failed for me I had to re-Odin either (I forget which) the stock ROM and Philz, or just Philz.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v6.3, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
Which md5 and zip did you use? I used philz_touch_6.41.4-i9500.zip and that didn't get me root. I was able to get the md5 to work but after flashing the zip, still no root access.
dyetube said:
Which md5 and zip did you use? I used philz_touch_6.41.4-i9500.zip and that didn't get me root. I was able to get the md5 to work but after flashing the zip, still no root access.
Click to expand...
Click to collapse
the latest Philz is 6.48.4 and i used the .Tar.Md5 Odin flashable and you can always try using Towel root
Hell, just flash the already rooted but completely stock either Odexed or DeOdexed stock ND8 ROM put up by Cnexus in development (non-original).
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v6.3, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
6th_Hokage said:
the latest Philz is 6.48.4 and i used the .Tar.Md5 Odin flashable and you can always try using Towel root
Click to expand...
Click to collapse
I tried 6.48.4 as well a towelroot with no success. This is really frustrating as I need to tehter my laptop so I can have better internet access.
dyetube said:
I tried 6.48.4 as well a towelroot with no success. This is really frustrating as I need to tehter my laptop so I can have better internet access.
Click to expand...
Click to collapse
Just flash an already rooted custom ROM like what's in my signature, or if you want completely stock but rooted, you can find Cnexus' Odexed (like original stock is) and Deodexed (more easily modded/themable) copies of ND8 in the development (non-original) section.
roirraW "edor" ehT said:
Hell, just flash the already rooted but completely stock either Odexed or DeOdexed stock ND8 ROM put up by Cnexus in development (non-original).
Click to expand...
Click to collapse
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v6.3, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
roirraW "edor" ehT said:
Just flash an already rooted custom ROM like what's in my signature, or if you want completely stock but rooted, you can find Cnexus' Odexed (like original stock is) and Deodexed (more easily modded/themable) copies of ND8 in the development (non-original) section.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v6.3, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
I'm just looking to be able to tether my phone for internet access to my laptop. My understanding is that root will give me this access (on sprint obviously). Not sure I want to do a custom rom as I don't really fool with y phone in that way much. Gonna try the deodexed and see how well that works.
Can I flash the rooted deodexed with philz recovery? I just tried it and my phone still doesn't show as rooted. I went into recovery and selected install zip/choose zip from /sdcard and selected the deodexed zip. What gives?
I think the de-odexed worked cause now I have root access. Thanks for all the help!
You're welcome!
Did you flash the Deodexed tethering mod (also in the same section as the rooted stock you used)? It's great having unlimited free tethering.
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v6.3, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

Categories

Resources