I tried to flash the S.E.A.L rom and black hawk kernel. I ended up getting a flickering color screen that's blurry and a shaky screen. Did I do something wrong this time or is the V4 rom still buggy?? Please help me thanks
Sent from my iPhone using Tapatalk
Gambino1ne said:
I tried to flash the S.E.A.L rom and black hawk kernel. I ended up getting a flickering color screen that's blurry and a shaky screen. Did I do something wrong this time or is the V4 rom still buggy?? Please help me thanks
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I had this too try a reflash again don't forget to full wipe also.
I'm on the cwm recovery and I did every wipe possible with the kernel and still had the problem
Sent from my iPhone using Tapatalk
Gambino1ne said:
I'm on the cwm recovery and I did every wipe possible with the kernel and still had the problem
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Do it again, at first normaly flash The Rom with full wipe, reboot after them flash The kernel with wipe cache and dalvik.
Okay thanks I'm gonna try it when I get off work
Sent from my iPhone using Tapatalk
bierma32 said:
Do it again, at first normaly flash The Rom with full wipe, reboot after them flash The kernel with wipe cache and dalvik.
Click to expand...
Click to collapse
Thank you very much brother! Wiping my tab and installing each zip individually worked! Did a full wipe and delvik wipe than install the sealV4 zip. Than did both cache wipes, and installed the kernel and worked like a charm. You rock!
Related
Hi there everyone
have a weird issue... tried searching and nothing
ok, so i installed the first ROM of bigxie . everything went fine and nothing went wrong in any ways...
i then tried to install v2 of the ROM that came out a couple days later... and it wouldnt boot past the google writing screen... no matter what i do it wont boot into android... i have dont the wipe data, cache, dalvik etc... this isnt my first rodeo lol
i have tried flashing other jelly bean ROMs an nothing... i can restore to my previous ICS perfectly fine but nothing will load JB...
i have tried to restore with Odin but now in bootloader windows wont detect the phone at all... i have kies installed and have separately installed the drivers, nothing is making Odin see the devices, so i cant even use odin to restore to a factory image...
i have the latest bootloader installed and have the latest touch CWM installed as well... currently running the latest kernel from franco and using aokp 40
this is not making any sense to me and i need help to get my device back to JB, as ICS i cant stand anymore LOL
thanks for you help in advance!
http://forum.xda-developers.com/showthread.php?t=1626895
thank you for the link that helped me get the drivers working properly again.
my issue is i cannot load any JB roms at all, via CWM or otherwise... however i can still load ICS roms without issues...
and i still cant get odin to see my device at all, yet galaxy nexus toolkit works fine! ugh... lol i cannot load any OEM images at all... even the nexus toolkit doesnt want to load a OEM image to the device....
thanks again!
c_86 said:
thank you for the link that helped me get the drivers working properly again.
my issue is i cannot load any JB roms at all, via CWM or otherwise... however i can still load ICS roms without issues...
and i still cant get odin to see my device at all, yet galaxy nexus toolkit works fine! ugh... lol i cannot load any OEM images at all... even the nexus toolkit doesnt want to load a OEM image to the device....
thanks again!
Click to expand...
Click to collapse
I have the same problem ics rom work perfectly but jb roms get stuck in the Google screen or the X screen and I tried leaving it alone for a while but it drains the battery and turns off
@ c_86 and kingviper10: not sure what you guys are trying to do, but instructions on how to flash stock images are in the first post of the thread I linked to, and instructions for JB are in the second post. Not sure why you are talking about Odin or toolkits...
Sent from my Galaxy Nexus using Tapatalk 2
Are you sure you have cwm5.5.0.4 installed? NOT the touch version?
SikkNazty said:
Are you sure you have cwm5.5.0.4 installed? NOT the touch version?
Click to expand...
Click to collapse
I'm pretty sure he did say that he was on the touch version of CWR .
@efrant
i am talking about toolkits and odin because i cannot flash a jelly beam rom, OEM or otherwise via CWM at all... thats the issue...
to the other, i have i think 5.8.0.2 touch ClockworkMod Recovery
ugh this is so frustrating... lol i dont understand what is going on....
c_86 said:
@efrant
i am talking about toolkits and odin because i cannot flash a jelly beam rom, OEM or otherwise via CWM at all... thats the issue...
to the other, i have i think 5.8.0.2 touch ClockworkMod Recovery
ugh this is so frustrating... lol i dont understand what is going on....
Click to expand...
Click to collapse
Then you are doing something wrong. Did you follow the instructions in the link I provided you?
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
c_86 said:
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
What is "the fix" you are talking about?
And use this recovery, not the one you are using. (The touch one is not entirely stable, even koush said so, so I have no idea why people insist on using it...)
Did you fix permissions after flashing the ROM and fix?
Try factory reset, wipe cache, dalvik cache, wipe system, then install ROM and fix, then fix permissions, then reboot.
Sent from my Galaxy Nexus using xda premium
Thanks I'll try that recovery and see if that works. I'll report back later.
As for fixing permissions. Yes I've tried that as well. No luck either.
Sent from my Galaxy Nexus using Tapatalk 2
c_86 said:
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Why do you wipe cache and dalvik cache twice?
707BeastMode707 said:
Did you fix permissions after flashing the ROM and fix?
Try factory reset, wipe cache, dalvik cache, wipe system, then install ROM and fix, then fix permissions, then reboot.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
This makes more sense. And yeah, try the recovery image efrant kindly linked you to, i didnt have any issues with twrp 2.1.2 either, if i may.
sent from my i9250
ooook... no go on that recovery image either...
i flashed the 5.5.0.2 recovery and same issue... will not boot past the google writing screen... i really dont know what else to do...
anyone?!
Hey guys, I just bought my Galaxy S III, I'm coming from the S II.
On the S II, there would be an installation process that I remembered by heart after flashing several times:
Open CWM
Backup
Install Darkside SuperWipe
Flash ROM
Flash gapps
Install Darkside Cachewipe
Reboot
Wait 10 min
Reboot.
While I've been on the S III forums for the past 2 days I haven't seen any of the devs have an installation guide, I figured I might have to wipe dalvik, wipe data or something but haven't tried just yet. Maybe I could just flash ROM over it.
If there's a process can someone please tell me.
Thank you, greatly appreciated.
Sent from my SGH-T999 using xda premium
Backup
Wipe cache
Wipe dalvik
Wipe data/factory reset
Install ROM
Wipe cache
Wipe dalvik
Reboot (unless u need a kernel then see below)
Some ROMs require to flash kernel in that case after the last dalvik wipe flash kernel then wipe cache and dalvik.
P.s. u posted in the wrong section and u will here it from more than me this should be In Q &A hope that helps ya tho....
Sent from my SGH-T999 using xda premium
real_khali said:
Hey guys, I just bought my Galaxy S III, I'm coming from the S II.
On the S II, there would be an installation process that I remembered by heart after flashing several times:
Open CWM
Backup
Install Darkside SuperWipe
Flash ROM
Flash gapps
Install Darkside Cachewipe
Reboot
Wait 10 min
Reboot.
While I've been on the S III forums for the past 2 days I haven't seen any of the devs have an installation guide, I figured I might have to wipe dalvik, wipe data or something but haven't tried just yet. Maybe I could just flash ROM over it.
If there's a process can someone please tell me.
Thank you, greatly appreciated.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Superwipe , wipe cache and cache/dalvik install ROM and then gapps if your installing a jb 4.1.1 ROM then I would wipe everything again and then fix permissions and reboot, wait 10 min and reboot again
Please correct me if I missed a step
Sent from my SGH-T999 using xda app-developers app
shehade08 said:
Superwipe , wipe cache and cache/dalvik install ROM and then gapps if your installing a jb 4.1.1 ROM then I would wipe everything again and then fix permissions and reboot, wait 10 min and reboot again
Please correct me if I missed a step
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
So does SuperWipe work for every phone?
My .zip file for SuperWipe says SGH-T989_Darkside_superwipe.zip
I would not use the super wipe script from The s2 I believe there is one floating around for ours but I do not use it ... I also recommend u use twrp recovery instead of clockworkmod
Sent from my SGH-T999 using xda premium
mikeb85 said:
I would not use the super wipe script from The s2 I believe there is one floating around for ours but I do not use it ... I also recommend u use twrp recovery instead of clockworkmod
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This is what I did 2 days ago to install AOKP JB Build 3 and its been working like a charm
Reboot recovery
Wipe data factory reset
Wipe cache
Wipe dalvik cache
Flash rom
Let the phone sit for 5 mins then reboot
Haven't had any SOD or RR, should I stick to what I did?
real_khali said:
This is what I did 2 days ago to install AOKP JB Build 3 and its been working like a charm
Reboot recovery
Wipe data factory reset
Wipe cache
Wipe dalvik cache
Flash rom
Let the phone sit for 5 mins then reboot
Haven't had any SOD or RR, should I stick to what I did?
Click to expand...
Click to collapse
U also need gapps for aokp,cm10,paranoid,hellfire, and cna... u do not need gapps for touch wiz jellybean leaks.
Sent from my SGH-T999 using xda premium
mikeb85 said:
U also need gapps for aokp,cm10,paranoid,hellfire, and cna... u do not need gapps for touch wiz jellybean leaks.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
yeah my bad...i also flashed gapps..i forgot to put that in there..
So, should I just stick to what I did previously?
I depends what u are looking for in a ROM..... if u like stock aosp then aokp is probably the most stable but there are tons of features on touchwiz ROMs that have me going back and forth... so its all preference really if u like stock jellybean
Then u are good where u are
Sent from my SGH-T999 using xda premium
mikeb85 said:
I depends what u are looking for in a ROM..... if u like stock aosp then aokp is probably the most stable but there are tons of features on touchwiz ROMs that have me going back and forth... so its all preference really if u like stock jellybean
Then u are good where u are
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
yeah, i like where i stand with the AOKP builds, it always has me going back to it . thanks for the help
edit: just noticed several people have replied already.
But in case you missed this:
Don't post in this section if you're not a developer. Use the Q&A subforum instead.
stir fry a lot said:
edit: just noticed several people have replied already.
But in case you missed this:
Don't post in this section if you're not a developer. Use the Q&A subforum instead.
Click to expand...
Click to collapse
Couldn't have put it any better.
Sent from my SGH-T999 using Tapatalk 2
Thread cleaned
Flaming will not be tolerated
FNM
Superwipe for our device:
http://dl.dropbox.com/u/34055339/XquiziT_SuperWipe_SGH_T999.zip
well typically any ROM that i flash i just use these steps and haven't gotten many problems
reboot into recovery
backup
wipe data
flash rom
flash kernel (optional)
wipe cache
wipe dalvik cache
fix permissions
boot
wait 10 mins
reboot
Testimonyy said:
well typically any ROM that i flash i just use these steps and haven't gotten many problems
reboot into recovery
backup
wipe data
flash rom
flash kernel (optional)
wipe cache
wipe dalvik cache
fix permissions
boot
wait 10 mins
reboot
Click to expand...
Click to collapse
Yes but the superwipe does the same thing and it was built for lazy people. I always say "what ever floats your boat". :good:
I've installed ROMs before so I'm not a complete noob, but I'm clearly doing something wrong and would like some help.
I've tried installing 3 different JB ROMs (Kobridge tweaked FL04, Jellyverse0.3, JB Black Bean) and everytime I boot up into the Sprint animation and it hangs every single time at the big 4G. I'm coming from BluKuban which I return to every time after flashing EL29 direct boot through pc Odin.
This is what I've been doing:
Installed EL29 direct boot or EL26 stock
cleared cache, davlik and run Format_All_X2
Installed JB modem
installed ROM
run Format All X2 again
A couple of files might be different depending on the ROM instructions, but that's what I've been doing.
Any ideas what I'm doing wrong?
flamand said:
I've installed ROMs before so I'm not a complete noob, but I'm clearly doing something wrong and would like some help.
I've tried installing 3 different JB ROMs (Kobridge tweaked FL04, Jellyverse0.3, JB Black Bean) and everytime I boot up into the Sprint animation and it hangs every single time at the big 4G. I'm coming from BluKuban which I return to every time after flashing EL29 direct boot through pc Odin.
This is what I've been doing:
Installed EL29 direct boot or EL26 stock
cleared cache, davlik and run Format_All_X2
Installed JB modem
installed ROM
run Format All X2 again
A couple of files might be different depending on the ROM instructions, but that's what I've been doing.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Don't flash format all zip after flashing rom zip.
You are wiping system right after flashing rom so there is no system and thus you don't boot.
Sent from my SPH-D710 using xda app-developers app
Thanks for the suggestion, but format_all_x2.zip just wipes data, cache and dalvik, doesn't it? I use it all the time when reflashing Ruj's BluKuban.
BluesRulez said:
Don't flash format all zip after flashing rom zip.
You are wiping system right after flashing rom so there is no system and thus you don't boot.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
flamand said:
Thanks for the suggestion, but format_all_x2.zip just wipes data, cache and dalvik, doesn't it? I use it all the time when reflashing Ruj's BluKuban.
Click to expand...
Click to collapse
It wipes system, not dalvik.
flamand said:
Thanks for the suggestion, but format_all_x2.zip just wipes data, cache and dalvik, doesn't it? I use it all the time when reflashing Ruj's BluKuban.
Click to expand...
Click to collapse
Its not a suggestion. Its your FIX. It wipes system. I hope you are not confusing format all x2 zip with modified_format all zip. The modified zip wipes only the caches.
As such there is NO need to wipe after flashing the ROM..
Are you following the directions on the OP of each ROM?
If not... do it, that is how you fix your problem.
Sent from my SPH-D710 using xda premium
Yes I am, unless I'm misunderstanding something. That list is what seemed to be in common to all three.
I'll try to do it again tomorrow when I have a few hours.
Mattix724 said:
Are you following the directions on the OP of each ROM?
If not... do it, that is how you fix your problem.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I had just installed this kernel http://forum.xda-developers.com/showthread.php?t=2139055
After I installed the kernel I rebooted and then I get this black screen and it has been stuck for about 15+ minutes now. Whats funny is when I touch the screen the menu buttons illuminate, and I can hear the touch sounds, of my phone.
-Thanks for any help
Most likely have a ROM that is incompatible with that kernel. I flashed this to with milestone 1 of AOKP. Had to redo everything. Factory wipe and restore your last nandroid.
Sent from my SGH-I747 using xda premium
thegodsquirrel said:
Most likely have a ROM that is incompatible with that kernel. I flashed this to with milestone 1 of AOKP. Had to redo everything. Factory wipe and restore your last nandroid.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Does cyanogenmod 10.1 m3 work with this kernel?? I may switch back.
just boot into recovery, wipe cache, flash the rom you're running, flash gapps, reboot. eat cake
xBeerdroiDx said:
just boot into recovery, wipe cache, flash the rom you're running, flash gapps, reboot. eat cake
Click to expand...
Click to collapse
Thats what i did to fix the problem, but dang i really want that kernel so bad.
galaxys3world said:
Thats what i did to fix the problem, but dang i really want that kerneld.
Click to expand...
Click to collapse
What is you're ROMs release date and kernel version? Locate and download the BMS release with similar details.
Hey members of XDA.
I downloaded the new Phantom v11 for my new note 2 which was running 4.3 stock.
i installed the Phantom ROM using TWRP and it is stuck in the S5 Boot Animation i waited for about 20 mins.
Do you guys know how to fix it ? .
Link to Phantom ROM : http://forum.xda-developers.com/showthread.php?t=2737570
Thanks !
superrobot48 said:
Hey members of XDA.
I downloaded the new Phantom v11 for my new note 2 which was running 4.3 stock.
i installed the Phantom ROM using TWRP and it is stuck in the S5 Boot Animation i waited for about 20 mins.
Do you guys know how to fix it ? .
Link to Phantom ROM : http://forum.xda-developers.com/showthread.php?t=2737570
Thanks !
Click to expand...
Click to collapse
1. If you can go to recovery, wipe and reflash the ROM by following procedure given by developer.
2. If that does not work, flash Philz recovery, wipe/factory reset --> wipe cache partition --> wipe dalvik --> and flash the ROM.
3. Should be good to go.
4. Hope you have made EFS backup.
Press thumps up if you found my suggestions helpful.
Sent from my GT-N7100 using Tapatalk
not working
ceomaverick said:
1. If you can go to recovery, wipe and reflash the ROM by following procedure given by developer.
2. If that does not work, flash Philz recovery, wipe/factory reset --> wipe cache partition --> wipe dalvik --> and flash the ROM.
3. Should be good to go.
4. Hope you have made EFS backup.
Press thumps up if you found my suggestions helpful.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
i tried all your suggestions and it is still not working ;(
superrobot48 said:
i tried all your suggestions and it is still not working ;(
Click to expand...
Click to collapse
Looks like you will have to flash stock ROM.
Sent from my GT-N7100 using Tapatalk
those trbronni
wath bootloader you use
ceomaverick said:
Looks like you will have to flash stock ROM.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Fixed: By updating the recovery
ANOUAR.SAM said:
wath bootloader you use
Click to expand...
Click to collapse
The stock 4.3 one i guess