I had just installed this kernel http://forum.xda-developers.com/showthread.php?t=2139055
After I installed the kernel I rebooted and then I get this black screen and it has been stuck for about 15+ minutes now. Whats funny is when I touch the screen the menu buttons illuminate, and I can hear the touch sounds, of my phone.
-Thanks for any help
Most likely have a ROM that is incompatible with that kernel. I flashed this to with milestone 1 of AOKP. Had to redo everything. Factory wipe and restore your last nandroid.
Sent from my SGH-I747 using xda premium
thegodsquirrel said:
Most likely have a ROM that is incompatible with that kernel. I flashed this to with milestone 1 of AOKP. Had to redo everything. Factory wipe and restore your last nandroid.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Does cyanogenmod 10.1 m3 work with this kernel?? I may switch back.
just boot into recovery, wipe cache, flash the rom you're running, flash gapps, reboot. eat cake
xBeerdroiDx said:
just boot into recovery, wipe cache, flash the rom you're running, flash gapps, reboot. eat cake
Click to expand...
Click to collapse
Thats what i did to fix the problem, but dang i really want that kernel so bad.
galaxys3world said:
Thats what i did to fix the problem, but dang i really want that kerneld.
Click to expand...
Click to collapse
What is you're ROMs release date and kernel version? Locate and download the BMS release with similar details.
Related
Hey guys im having a problem getting MIUI to boot on my phone I did the format all and flashed it and it just bootloops what should I do
Sent from my PC36100 using XDA App
You need to properly wipe data, cache and dalvik cache. Just flashing the format all is not enough to wipe everything.
ClockworkMod Recovery?
Are you not able to hboot?
If you can, I'd factory reset and wipe dalvik as well.
You might take a look at SalvageMod 1.0 as well. Fewer issues than the stock out of the box ROM.
[email protected] said:
Hey guys im having a problem getting MIUI to boot on my phone I did the format all and flashed it and it just bootloops what should I do
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Find the clear-temp-files.zip and flash that after flashing the format-all.zip. Then flash the rom. This is especially important if you're coming from a sense rom. Also do not restore system data or system apps, if you use TB. Just restore user apps and data.
Clockwork doen't wipe .. unless they fixed it .. IDK I don't use it because it wouldn't wipe all the data, then I would get stuck in a boot loop. Flash Amon Recovery, wipe all except system, then flash .. ENJOY!!
i have tried everything you guys have said and it still isnt working is there only one file i have to flash?
[email protected] said:
i have tried everything you guys have said and it still isnt working is there only one file i have to flash?
Click to expand...
Click to collapse
Are you flashing a custom kernel with it?
No which one would you suggest I use
Sent from my PC36100 using XDA App
[email protected] said:
No which one would you suggest I use
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Savaged-zen is supposed to work nice. I'm rocking Tiamat, and its pretty nice.
[email protected] said:
i have tried everything you guys have said and it still isnt working is there only one file i have to flash?
Click to expand...
Click to collapse
What recovery are you using?
ok ill have to check it out and im using RA 2.3
Yea, for AOSP, I strongly recommend Tiamat. Been using it a couple days and great performance and battery life. SBC and No-SBC versions availible.
should i use a GB version of it or the froyo
I would say go gingerbread version.
[email protected] said:
ok ill have to check it out and im using RA 2.3
Click to expand...
Click to collapse
I am using Amon and this is method that worked for me:
1. Wipe Data/Factory Reset
2. Wipe Dalvik-Cache
3. Flash Miui
4. Reboot
Maybe try it one more time. Maybe bad download of Miui - are you trying the most recent Miui?
well i flashed an older version and it worked but when i tried to flash the update it stoped working
teh roxxorz said:
I would say go gingerbread version.
Click to expand...
Click to collapse
So you would run a gingerbread kernel for a froyo based rom?
FAIL!
Flashing it in the same method?
sultan.of.swing said:
So you would run a gingerbread kernel for a froyo based rom?
FAIL!
Click to expand...
Click to collapse
Knowingly, I wouldn't. As I stated before, I've never used MIUI. Seeing as its Froio based, you need to run the Froyo based. Though Gingerbread kernels CAN run on Froyo based roms.
Use Amon_RA, wipe chache, flash phone with MIUI again, wipe chache one more time. That is what I did last night because I was getting stuck at boot animation screen. I did not flash kernel because I had ziggy already.
In CWM, I just flashed the AOKP Milestone 3 ROM, then the Gapps, and then the Franco kernel without rebooting.
Now I reboot and it seems to be stuck in the "Team Kang" boot animation forever.
I checked my MD5s and they were all good.
Did I do something wrong?
onlywei said:
In CWM, I just flashed the AOKP Milestone 3 ROM, then the Gapps, and then the Franco kernel without rebooting.
Now I reboot and it seems to be stuck in the "Team Kang" boot animation forever.
I checked my MD5s and they were all good.
Did I do something wrong?
Click to expand...
Click to collapse
Hey I always do rom, gapps reboot sign in set things up then reboot flash the kernel. Never had bootloop. I'd say reflash dude.
Reflash using a stock ROM or Kernel or reflash something else?
onlywei said:
Reflash using a stock ROM or Kernel or reflash something else?
Click to expand...
Click to collapse
Reflash the AOKP M3 rom and gapps. Then start the phone, set up your stuff and then reboot and do the kernel. I always wipe davlik when flashing a kernel too.
How would I unflash the kernel before reflashing the rom and gapps?
Sent from my Transformer Prime TF201 using Tapatalk
onlywei said:
How would I unflash the kernel before reflashing the rom and gapps?
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
You don't need to. The AOKP romw will load it's own in built kernel. You getting sorted?
I the last 10x or so, have installed the ROM, GAPPS and a kernel all at the same time with no ill effects.
I wipe data and dalvik then just install rom, gapps, and kernel all in one go every time.. no ill effects
Sent from my Galaxy Nexus using xda premium
Ok, i was on vicious jb rom and I flashed the cm9 stable rom. everything was working great until i tried to flash the imoseyen kernel through franco kernel updater app from the play store. now im trying to wipe everything and i get to the google screen and about half way through the cm9 boot image and it freezes up and starts over at the google screen. can someone please help me!?
fk.gregor said:
Ok, i was on vicious jb rom and I flashed the cm9 stable rom. everything was working great until i tried to flash the imoseyen kernel through franco kernel updater app from the play store. now im trying to wipe everything and i get to the google screen and about half way through the cm9 boot image and it freezes up and starts over at the google screen. can someone please help me!?
Click to expand...
Click to collapse
Did you try reflashing the ROM?
Sent from my Galaxy Nexus using xda premium
Lesicnik1 said:
Did you try reflashing the ROM?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
yes, ive wipe/ factory reset, wipe cache and dalvik. every time it does the same.
it wont pass the boot animation at all.
is there a way to push files onto the phone without it being debugging mode or anything?
i cant gain root access to it, so my question is, is there a way to push files on a different way?
adb push in a custom recovery
Unlock the boot loader
Flash ClockworkMod Recover
Adb push a ROM to SD card
Wipe data/cache
Wipe system and dalvik-cache
Flash ROM and Gapps
This should do it. You may also want to try restoring an old backup, if you have one.
Sent from my Galaxy Nexus using Tapatalk 2
flash stock using fastboot.
fk.gregor said:
Ok, i was on vicious jb rom and I flashed the cm9 stable rom. everything was working great until i tried to flash the imoseyen kernel through franco kernel updater app from the play store. now im trying to wipe everything and i get to the google screen and about half way through the cm9 boot image and it freezes up and starts over at the google screen. can someone please help me!?
Click to expand...
Click to collapse
Looks like imoseyen & CM9 don't like each other. I'd try reflashing the kernel that comes with cm9 stable (just extract it) via fastboot. If that doesn't work, you'll probably have to do a full reflash of your ROM.
I ended up unrooting it and flashing stock. I'll just wait until cm10 gets stable.
Sent from my Galaxy Nexus using xda premium
Hello I been trying to use the ktoonz kernel for some time now and every time I install it after reboot I get a black screen after. The rom is compatible cause a lot of people have it up and running with the jelly bomb 11.0 rom. Anyone has any idea why this is happening? I searched the forums and I can't find a solution any help would be greatly appreciated thanks in advance
I would not think you would need to flash this kernel over the ROM since Jelly Bomb 11 comes with this kernel already installed.
Having said that you should not have a problem flashing the kernel again, as long as you flashed the correct one. Did you flash the TW kernel or the AOSP kernel?
m20120 said:
I would not think you would need to flash this kernel over the ROM since Jelly Bomb 11 comes with this kernel already installed.
Having said that you should not have a problem flashing the kernel again, as long as you flashed the correct one. Did you flash the TW kernel or the AOSP kernel?
Click to expand...
Click to collapse
I flashed the from itself and I got the black screen so I downloaded the TW kernel same result then I tried the aosp and the black screen remains I don't know what I'm doing wrong
Jelly Bomb is a TW ROM so you need the TW kernel. The AOSP kernel will not work.
You may need to wipe all (data, cache and Dalvik) after flashing this ROM.
holyvail said:
Hello I been trying to use the ktoonz kernel for some time now and every time I install it after reboot I get a black screen after. The rom is compatible cause a lot of people have it up and running with the jelly bomb 11.0 rom. Anyone has any idea why this is happening? I searched the forums and I can't find a solution any help would be greatly appreciated thanks in advance
Click to expand...
Click to collapse
Did you run the kernel cleaner script after flashing the kernel? http://forum.xda-developers.com/atta...5&d=1347395869
I believe that will do the trick, flash kernel, then flash kernel cleaner script.
m20120 said:
Jelly Bomb is a TW ROM so you need the TW kernel. The AOSP kernel will not work.
You may need to wipe all (data, cache and Dalvik) after flashing this ROM.
Click to expand...
Click to collapse
Imma try to flash the kernel again thanks
livito said:
Did you run the kernel cleaner script after flashing the kernel? http://forum.xda-developers.com/atta...5&d=1347395869
I believe that will do the trick, flash kernel, then flash kernel cleaner script.
Click to expand...
Click to collapse
The link you provided isn't working
holyvail said:
Imma try to flash the kernel again thanks
Click to expand...
Click to collapse
If you still get stuck at a black screen you should wipe data and caches.
Sent from my SPH-L710 using xda app-developers app
m20120 said:
If you still get stuck at a black screen you should wipe data and caches.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Still getting screens I wiped caches system factory reset as well all I didn't do was format data
I lost my boot animation after flashing the kernel. Just give it a few min. It should boot up
Sent from my SPH-L710 using xda app-developers app
bog3nator said:
I lost my boot animation after flashing the kernel. Just give it a few min. It should boot up
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I let it sit for 10 minutes and nothing bottom lights didn't come on or anything been wiping caches system and factory resetting and it keeps happening
Bad download? It happens.
sent from a secret underground bunker
holyvail said:
The link you provided isn't working
Click to expand...
Click to collapse
I just tried the link and I was able to download the zip file, it is a direct link, doesnt take you to any page, it starts the download automatically.
bog3nator said:
I lost my boot animation after flashing the kernel. Just give it a few min. It should boot up
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Were you able to reflash a boot animation?
mjben said:
Bad download? It happens.
sent from a secret underground bunker
Click to expand...
Click to collapse
just re downloaded same issue imma just stick with stock since my phone isnt cooperating with custom kernals at all even tried with the peoples rom still get the black screen
holyvail said:
just re downloaded same issue imma just stick with stock since my phone isnt cooperating with custom kernals at all even tried with the peoples rom still get the black screen
Click to expand...
Click to collapse
you're not alone I have the exact same issue but mines boot up and then non stop flickering of screens and menus going black then coming back when i tap the screen. Im on Phantom Hackers rom (2.1 rooted / mostly stock) I tired the kernel cleaner but was told to run it BEFORE I flask ktoonsez kernel. No dice I got the same effect.
I should probably try the cleaner after flashing the kernel huh? .....brb.
Edit: No dice - same effect flashing the cleaner before and after flashing the kernel.
have to go back to freeza "LJ7 Kernel with bootanimation support" only one that works for me.
Can't understand what would be causing this.
DC_MTP said:
you're not alone I have the exact same issue but mines boot up and then non stop flickering of screens and menus going black then coming back when i tap the screen. Im on Phantom Hackers rom (2.1 rooted / mostly stock) I tired the kernel cleaner but was told to run it BEFORE I flask ktoonsez kernel. No dice I got the same effect.
I should probably try the cleaner after flashing the kernel huh? .....brb.
Edit: No dice - same effect flashing the cleaner before and after flashing the kernel.
have to go back to freeza "LJ7 Kernel with bootanimation support" only one that works for me.
Can't understand what would be causing this.
Click to expand...
Click to collapse
Exactly stock kernel works fine but ktoon gives me a black screen no matter what I do I'm just gonna give up on this kernel its been 2 days of trying
Hi all, just flashed jellybam using mobile odin but now on the screen there is just the android robot flying through space its been like this now for 40 minutes so Im guessing its stuck. what can I do the phone is a N7100 note 2 in the UK
I am a noob sorry
jackdaripper said:
Hi all, just flashed jellybam using mobile odin but now on the screen there is just the android robot flying through space its been like this now for 40 minutes so Im guessing its stuck. what can I do the phone is a N7100 note 2 in the UK
I am a noob sorry
Click to expand...
Click to collapse
Its rooted and the kernal is redpill Ive got mobile odin,CWM and titanium backup on it.
jackdaripper said:
Its rooted and the kernal is redpill Ive got mobile odin,CWM and titanium backup on it.
Click to expand...
Click to collapse
Have you made a nandroid backup in CWM?
If so you can reboot back into recovery by long pressing the power button + volume up and home button and then restore your backup
Robobob1221 said:
Have you made a nandroid backup in CWM?
If so you can reboot back into recovery by long pressing the power button + volume up and home button and then restore your backup
Click to expand...
Click to collapse
I think so not 100% but its not giving me the option when I boot into recovery
jackdaripper said:
I think so not 100% but its not giving me the option when I boot into recovery
Click to expand...
Click to collapse
I don't use CWM, I use TWRP, but if there isn't an option to restore from that menu, then you probably don't have a backup.
You sure you're using the right version of the kernel? and you wiped cache and dalvik after flashing the new rom?
Robobob1221 said:
I don't use CWM, I use TWRP, but if there isn't an option to restore from that menu, then you probably don't have a backup.
You sure you're using the right version of the kernel? and you wiped cache and dalvik after flashing the new rom?
Click to expand...
Click to collapse
def wiped cashe and dalvik using mobile odin ... not sure with kernel,maybe that was the problem. is redpill kernal incompatible with jellybam rom
im downloading stock rom and i will try and flash using pc/odin
jackdaripper said:
def wiped cashe and dalvik using mobile odin ... not sure with kernel,maybe that was the problem. is redpill kernal incompatible with jellybam rom
im downloading stock rom and i will try and flash using pc/odin
Click to expand...
Click to collapse
I haven't used the redpill kernel, I'm actually an lte version, but check if there are Samsung and Aosp based versions of the kernel. And if so are you using the right one.
Download the aosp redpill. Push it to phone via adb. Then flash it and do a factory reset.
Sent from my GT-N7100
Redpill kernel isn't yet compatible with newer cm based roms because it doesn't have Mali r3p1 driver support yet.
Sent from my GT-N7100 using xda premium