Is there any way to make Igo work on qHD...I need it so much now?
crni6 said:
Is there any way to make Igo work on qHD...I need it so much now?
Click to expand...
Click to collapse
maybe a dumb question but what is lgo primo and what is the exact problem
Igo primo is navigation...like tom tom and copilot. Problem is that I can find way to install it couse resolution is to big.
crni6 said:
Igo primo is navigation...like tom tom and copilot. Problem is that I can find way to install it couse resolution is to big.
Click to expand...
Click to collapse
unfortunately there are a few apps that wont work because of the resolution :crying:
Yes...I hope thay will soon launch supported apps.
crni6 said:
Is there any way to make Igo work on qHD...I need it so much now?
Click to expand...
Click to collapse
crni6 said:
Igo primo is navigation...like tom tom and copilot. Problem is that I can find way to install it couse resolution is to big.
Click to expand...
Click to collapse
crni6 said:
Yes...I hope thay will soon launch supported apps.
Click to expand...
Click to collapse
if you want that app and you have root access try this
install xposed an set it up then reboot install appsettings in xposed and select module in xposed (reboot after)
go to appsettings and select the malfunctioning apps and keep changing the dpi value until the app looks good/starts (300~400 should work)
after setting new value go to settings>apps>app of which you changed dpi>force close
this is to apply settings
it works for me 100% of the time
Also, it's "QHD". "qHD" is 960x540. Capital letters matter with electronics specs. Just like your home internet is mb which is a HUGE difference from MB.
iGO Primo vs LG G3
crni6 said:
Is there any way to make Igo work on qHD...I need it so much now?
Click to expand...
Click to collapse
Hi,
Last weekend I managed to install iGO Primo into my LG G3. It worsk fine. The version of iGO I'm using is 9.6.29.390522.
I did not have to make any changes in sys.txt. It also supports screen rotations etc...
Good luck
K.
ktakacs said:
Hi,
Last weekend I managed to install iGO Primo into my LG G3. It worsk fine. The version of iGO I'm using is 9.6.29.390522.
I did not have to make any changes in sys.txt. It also supports screen rotations etc...
Good luck
K.
Click to expand...
Click to collapse
I have a certain problem, maybe you can help. I installed iGO as well, no changes were needed in sys.txt. However, when i enter the app and try to view map in 2D mode i get certain "roads" that are obviously a bug. I tried with different map, the bug remains. Thoughts?
pedja.m said:
I have a certain problem, maybe you can help. I installed iGO as well, no changes were needed in sys.txt. However, when i enter the app and try to view map in 2D mode i get certain "roads" that are obviously a bug. I tried with different map, the bug remains. Thoughts?
Click to expand...
Click to collapse
Same problem.
Same for me as well, anyone managed a way to get rid of that?
shaarky said:
Same for me as well, anyone managed a way to get rid of that?
Click to expand...
Click to collapse
I'm using Sygic atm, it's quite good. iGO has the issue mentioned , plus it runs terribly slow on G3 for some reason. IGO performs way better on my old galaxy S2 than on G3 lol.
I know that, just hope there is some simple way to fix it
pedja.m said:
I'm using Sygic atm, it's quite good. iGO has the issue mentioned , plus it runs terribly slow on G3 for some reason. IGO performs way better on my old galaxy S2 than on G3 lol.
Click to expand...
Click to collapse
Hey, I try Sygic and in my case its inaccurate and show me all ways but one that is best way skips,not just small roots in city but a big ones tooI too. I install igo and yes it has some bugs and it is slower a bit but in my case is best nav for me and most importantly its accurate.
Sent from my LG G3 using Tapatalk
crni6 said:
Hey, I try Sygic and in my case its inaccurate and show me all ways but one that is best way skips,not just small roots in city but a big ones tooI too. I install igo and yes it has some bugs and it is slower a bit but in my case is best nav for me and most importantly its accurate.
Sent from my LG G3 using Tapatalk
Click to expand...
Click to collapse
Sygic for Serbia (seeing that you are from Serbia ) is a bit specific. With Sygic, what you get by default are TomTom maps (the ones you get when you press download from the app itself) which are pretty bad. However, using truck maps which are Navteq (iGO uses Navteq maps too) it's pretty much the same then, although map version on iGO is a bit ahead. iGO, unfortunately, works very bad on G3, and is buggy with 2D view as shown in this post.
Yeah...maybe I miss something I try naviteq too but almost same there. I find that Igo is best for me....I dont say Sygic is bad.[emoji1]
Sent from my LG G3 using Tapatalk
crni6 said:
Yeah...maybe I miss something I try naviteq too but almost same there. I find that Igo is best for me....I dont say Sygic is bad.[emoji1]
Sent from my LG G3 using Tapatalk
Click to expand...
Click to collapse
iGO is great, the only problem is that it doesn't work as expected on G3, probably due to screen resolution. Hopefully they will fix that in next version or smth like that. ATM I have both iGO and Sygic installed on my G3 but i am using Sygic due to the problems with iGO.
I've managed to make a working kit on LG G3. 3D mode, and so on. a little bit of lag (I'm working at that) but it runs fine. if everyone needs it, give me a shout (probably a pm).
What about the 2D view zoomed out?
I switched from Igo to here navigation. Works great and its legal. Just beta atm but will go to play store soon. Also works offline. So for me after years of enjoying.... Bye bye Igo.
Sent from my GT-N8010 using XDA Free mobile app
Related
We should find out if we could work it out that Navigon, TMC and PRo2 are working together - we tried a lot and searched a lot but it seems that it doesn`t work so far - or ?
This might help you
http://forum.xda-developers.com/showthread.php?t=512630
Gordon
peter7 said:
We should find out if we could work it out that Navigon, TMC and PRo2 are working together - we tried a lot and searched a lot but it seems that it doesn`t work so far - or ?
Click to expand...
Click to collapse
If only I could even get Navigon 7 to work... I am glad I downloaded the trial first, because I was tempted to purchase it right away.
But the trial version doesn't work, it crashes my phone (hard), and the only way out is to remove the battery from the phone.
phusebox said:
the only way out is to remove the battery from the phone.
Click to expand...
Click to collapse
you can also use the reset button!
phusebox said:
If only I could even get Navigon 7 to work... I am glad I downloaded the trial first, because I was tempted to purchase it right away.
But the trial version doesn't work, it crashes my phone (hard), and the only way out is to remove the battery from the phone.
Click to expand...
Click to collapse
I'm using the trial with no problems. The d/l on the navigon site is not the latest (go figure!) see this thread http://forum.xda-developers.com/showthread.php?t=525887 . 7.3.4 build 494 works well. If your version is older than this I suggest you chase them for an update!
Gordon
Just get better keyboard, Battery life 24H!!
http://files.xdandroid.com/
Hi
It's very fine and usable but i can't find the live wallpaper function.
Do you know what can i do ???
PANCIO said:
Hi
It's very fine and usable but i can't find the live wallpaper function.
Do you know what can i do ???
Click to expand...
Click to collapse
It has no Live Wallpaper support because it's still alpha release.
And this feature has lower priority than other stuff that have to be fixed.
PANCIO said:
Hi
It's very fine and usable but i can't find the live wallpaper function.
Do you know what can i do ???
Click to expand...
Click to collapse
It won't have live wallpaper anytime soon. They are not worth fixing because they drain battery crazy fast and are darn slow on our devices. I think they were disabled on purpose in FroYo.
hi, can you tell us, what is working and what no in this build?
I refer about the bluetooth, camera, wifi...
Thanks
dedalum said:
hi, can you tell us, what is working and what no in this build?
I refer about the bluetooth, camera, wifi...
Thanks
Click to expand...
Click to collapse
Hi, dedalum!
On Blackstone BT does not work, wifi and data works, camera.... I'll test it! (I think it wont work) --Tested, but the news are bad!
The old kernels does not work with Gingerbread, so camera does not work, yet!
I tried two different kernels, for the camera testing and for the anti-audio stuttering MOD, in the both cases it cant reach the homescreen.
As nasko_spasko mentioned, camera seems out of reach for the moment...
I also asked in VirusCrazy's camera testing thread, and he also gives Gingerbread "low chance", something for the future...
But I should add that there is (probably more than one) kernel out here that fixes audio stuttering, I'm using Gingerbread with a modified 1253 kernel from http://forum.xda-developers.com/showpost.php?p=11169582&postcount=76
Audio and Wifi great, battery life ~ 20-30 hours (using periodic data for ClockSynch and some weather sync, but nothing else)
Cheers,
Robbert
nasko_spasko said:
Hi, dedalum!
On Blackstone BT does not work, wifi and data works, camera.... I'll test it! (I think it wont work) --Tested, but the news are bad!
The old kernels does not work with Gingerbread, so camera does not work, yet!
I tried two different kernels, for the camera testing and for the anti-audio stuttering MOD, in the both cases it cant reach the homescreen.
Click to expand...
Click to collapse
nasko_spasko said:
Hi, dedalum!
On Blackstone BT does not work, wifi and data works, camera.... I'll test it! (I think it wont work) --Tested, but the news are bad!
The old kernels does not work with Gingerbread, so camera does not work, yet!
I tried two different kernels, for the camera testing and for the anti-audio stuttering MOD, in the both cases it cant reach the homescreen.
Click to expand...
Click to collapse
The audio is the most important issue for me.
I have GBX0A running with 1255 kernel. It's the only one that doesn't give me audio-stuttering since Gingerbread won't boot with the 1498 kernel.
The latest kernels 1260/1262 both work but give audio-stutter.
Only thing i'd like is a new rootfs with keymapping for Blackstone like in the rootfs from 2011-01-31.
very nice build. i have one question though... why is the clock lazy?
it is like the android minute is a second short. is there a fix for this?
had the same problem. search market for time sync apps..
5zeci said:
very nice build. i have one question though... why is the clock lazy?
it is like the android minute is a second short. is there a fix for this?
Click to expand...
Click to collapse
Do as d.weiss says. Clocksync works perfectly.
5zeci said:
very nice build. i have one question though... why is the clock lazy?
it is like the android minute is a second short. is there a fix for this?
Click to expand...
Click to collapse
just get clocksync from market
Am i the only one having trouble with the keyboard not showing up properly? it's only about 20px high and it's impossible to see there are different keys but if you drag your finger around the popup with the different characters show up so it works but seem to be scaled incorrectly...
I tried long pressing on a text field to switch keyboard and the chineese keyboard works just fine but that doesn't really help me...
zagitta said:
Am i the only one having trouble with the keyboard not showing up properly? it's only about 20px high and it's impossible to see there are different keys but if you drag your finger around the popup with the different characters show up so it works but seem to be scaled incorrectly...
I tried long pressing on a text field to switch keyboard and the chineese keyboard works just fine but that doesn't really help me...
Click to expand...
Click to collapse
same problem.
and i had during the initial boot that the alignmet squares disapeared (the 4/5 blocks to align the touch screen)
zagitta said:
Am i the only one having trouble with the keyboard not showing up properly? it's only about 20px high...
Click to expand...
Click to collapse
SmokeMasta said:
same problem.
and i had during the initial boot that the alignmet squares disapeared (the 4/5 blocks to align the touch screen)
Click to expand...
Click to collapse
Keyboard is a known issue.
Recommendation: get Thumb keyboard from Market. It's free and has different layouts and looks.
Fix for alignment squares: use old ts-calibration file from another build, or use the one attached below. Just remove the extension and put it in the same folder as haret and startup.
hrk7474 said:
Keyboard is a known issue.
Recommendation: get Thumb keyboard from Market. It's free and has different layouts and looks.
Fix for alignment squares: use old ts-calibration file from another build, or use the one attached below. Just remove the extension and put it in the same folder as haret and startup.
Click to expand...
Click to collapse
How exactly am i supposed to get on the market in the first place when i can't write my email? I've put the apk onto the sd card but there's not even a file manager included so that's not possible either :<
zagitta said:
How exactly am i supposed to get on the market in the first place when i can't write my email? I've put the apk onto the sd card but there's not even a file manager included so that's not possible either :<
Click to expand...
Click to collapse
Use build in Japan IME. It has Latin characters on the numeric keyboard (like in non touchscreen phones). Should be enough to log into market and download gingerbread keyboard.
zagitta said:
How exactly am i supposed to get on the market in the first place when i can't write my email? I've put the apk onto the sd card but there's not even a file manager included so that's not possible either :<
Click to expand...
Click to collapse
Or just put the apk inside the AndroidApps folder (it's inside the andboot one). It will auto-install at boot.
I like the app "Gingerbread keyboard" though. I use it in froyo too.
g3rm0 said:
Use build in Japan IME.
Click to expand...
Click to collapse
Thanks so much for that, I owe you a huge beer!
Yes this version is working like a charm !
Its very fast and stable
Go into Diagnosis(call ##634#) and enter *#0*# and press Compass near the bottom right of the screen.
There, you have a built-in compass app.
It seems this trick also works on NoDo, just that it's more jumpy whereas Mango is perfectly smooth.
If it doesn't work, you may need to re-calibrate your compass.
Refer to the video on how to do it:http://www.youtube.com/watch?v=sP3d00Hr14o
I know it's an iPhone in the video, but just follow the same figure 8 motion with the compass activated. It should work after you do it.
UPDATE: For those on Mango, it is highly recommended that you uninstall your Diagnosis app and re-install it to get the latest version, Diagnosis_DU ver0628
There are reports that this does not work on HTC Devices. As of now, I can only confirm that it works on Samsung Omnia 7
Sorry, but how do I get to "diagnosis" screen in order to enter the code?
Go to phone, and dial ##634#. After that, when you exit, the app will appear in the app list on your phone.
Mine doesn't show any reading under the "Deg" value nor does the actual compass image turn. Is that what's supposed to happen?
Only the X, Y and Z values change...
timolol said:
Mine doesn't show any reading under the "Deg" value nor does the actual compass image turn. Is that what's supposed to happen?
Only the X, Y and Z values change...
Click to expand...
Click to collapse
You can try rebooting your phone.
If it doesn't help, you may need to re-calibrate your compass.
Refer to the video on how to do it:http://www.youtube.com/watch?v=sP3d00Hr14o
I know it's an iPhone in the video, but just follow the same figure 8 motion with the compass activated. It should work after you do it.
acefiredx said:
You can try rebooting your phone.
If it doesn't help, you may need to re-calibrate your compass.
Refer to the video on how to do it:http://www.youtube.com/watch?v=sP3d00Hr14o
I know it's an iPhone in the video, but just follow the same figure 8 motion with the compass activated. It should work after you do it.
Click to expand...
Click to collapse
I followed your steps but my omnia's compass still stays uncalibrated. It works on compass 7 but not in diagnosis. Did i miss something
Doesn't work with HD7, does it? oO
joeltimothyoh said:
I followed your steps but my omnia's compass still stays uncalibrated. It works on compass 7 but not in diagnosis. Did i miss something
Click to expand...
Click to collapse
Uninstall the diagnosis app then reinstall it. Now, it should show Diagnosis_DU ( ver0628) at the top left. Then, try accessing the compass again.
dkp1977 said:
Doesn't work with HD7, does it? oO
Click to expand...
Click to collapse
Not sure. I'm using an omnia 7.
You might want to try and update the results here, so other users will know as well.
acefiredx said:
Not sure. I'm using an omnia 7.
You might want to try and update the results here, so other users will know as well.
Click to expand...
Click to collapse
I did that and it doesn't work. Could have been an issue with my device, so I thought I'd better ask.
It's not working on HTC device.
acefiredx said:
Uninstall the diagnosis app then reinstall it. Now, it should show Diagnosis_DU ( ver0628) at the top left. Then, try accessing the compass again.
Click to expand...
Click to collapse
Uninstalling then re-entering ##634# updated my diagnosis version and now compass works! Awesome tip and thanks
Worked for my Omnia 7 too! Thanks!
Any how uses TomTom on our htc One?
On my crashes it when it needs a gps signal.
Any having the same problem?
Sygic works like a train. But i like te have TomTom.
Current tomtom version is 1.2
thanks in advance
I'm running TOMTOM ver 1.1.1 - UK and Ireland English
Seems to run without any problems. When I install the app I turn off all internet connections before 1st run of the app. Then it works fine.
M.
fibrousman said:
I'm running TOMTOM ver 1.1.1 - UK and Ireland English
Seems to run without any problems. When I install the app I turn off all internet connections before 1st run of the app. Then it works fine.
M.
Click to expand...
Click to collapse
thanks gonna try
no stil not working. Ad the moment i get the gps fix tomtom Europe 1.1.1 and 1.2 give a force close. I'm running stock rom
Works fine here on a revolution rom 9.3
Just bought it yesterday. Running on stock and not rooted, and it guided me perfectly to my work today.
The same route I've been using for 10 years now
google maps is 1 million times better.... . .. .
Dougi said:
google maps is 1 million times better.... . .. .
Click to expand...
Click to collapse
Not if Navigation is not available in your country, and not until GMaps tell you which lane to stick to at road splits and junctions. I personally prefer Sygic.
Dougi said:
google maps is 1 million times better.... . .. .
Click to expand...
Click to collapse
g nav doesn't have traffic info, speed cameras etc
ant78 said:
g nav doesn't have traffic info, speed cameras etc
Click to expand...
Click to collapse
It does have traffic
I prefer Sygic too.
robot1000 said:
It does have traffic
Click to expand...
Click to collapse
i never knew that as i use copilot live
Sygic is not realy that up to dat. I like the graphics of tomtom. But sygic isrealy good to. And it has speedcams.
Using TomTom Benelux v1.1.1 on Maximus' rom without issues.
Sent from my HTC One using xda app-developers app
I use TomTom Europe 1.2 and it works without any problems the gps fix is really fast ...
mabey sw reset? wil that work? I have seen after 10th of june 4.2.2 wil role out. We shall see
SW reset thit work
Deleted warez post. Don't even think about posting links to tomtom here....
I can't get it to load into any servers on my new 8.4. The app will load and I can select a server but then it just hangs at a black screen forever. I've tried letting it pick servers and I've selected a server through Battlelog and get the same result either way. I've tried on different wifi networks too so it isn't a network issue. Anyone else run into this or am I the only loser wasting time playing Commander at work lol
boosting1bar said:
I can't get it to load into any servers on my new 8.4. The app will load and I can select a server but then it just hangs at a black screen forever. I've tried letting it pick servers and I've selected a server through Battlelog and get the same result either way. I've tried on different wifi networks too so it isn't a network issue. Anyone else run into this or am I the only loser wasting time playing Commander at work lol
Click to expand...
Click to collapse
It doesn't work for me either, it's a tablet specific issue for us, as it works just fine on my Nexus 5.
I sit at the black screen too, I think it may be a resolution issue but I'm not 100%, the thread with the apk on here explains a bit more on how to fix the black screen issue but it's for phones running, but I assume it would work for our tablet as well but I'm not running a rom so no Xposed framework to edit the obb.
KrazyAttack said:
It doesn't work for me either, it's a tablet specific issue for us, as it works just fine on my Nexus 5.
I sit at the black screen too, I think it may be a resolution issue but I'm not 100%, the thread with the apk on here explains a bit more on how to fix the black screen issue but it's for phones running, but I assume it would work for our tablet as well but I'm not running a rom so no Xposed framework to edit the obb.
Click to expand...
Click to collapse
Thanks for the tip, I'll check it out and see if I can't get it going.
It was one of the first apps i downloaded whrn i got mine. i have the same issue. hope ea fix it...
I was afraid of this the commander app does not play nice does anyone know if there update helped at all?
Sent from my HTC6525LVW using Tapatalk
jparasita said:
I was afraid of this the commander app does not play nice does anyone know if there update helped at all?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Still doesn't work for me
boosting1bar said:
Still doesn't work for me
Click to expand...
Click to collapse
Hmm weird works great for me
jparasita said:
Hmm weird works great for me
Click to expand...
Click to collapse
Screenshot please, still don't work
DimonVideo said:
Screenshot please, still don't work
Click to expand...
Click to collapse
Like I said working on the 8.4
jparasita said:
Like I said working on the 8.4
Click to expand...
Click to collapse
This is battlelog, we speak about commander app. Join to any server in commander mode
DimonVideo said:
This is battlelog, we speak about commander app. Join to any server in commander mode
Click to expand...
Click to collapse
Ahhhh I was thrown off cause on the note 10.1 2014 it was the exact opposite