Develop Bugs

[Q] How to install kernel on galaxy S3 sprint

Can someone explain how to install custom kernel want to instal Ktoonz Kernel running free gs3 rom V 2.O can it be installed via Aroma installer.

Don't know. But you have not searched at all .....
You can install it by downliading the zip file then going into recovery and flashing it. Then wipe cache dalvik and fix permissions then reboot and you are done .
Sent from my SPH-L710 using Tapatalk 2

daniel4653 said:
Don't know. But you have not searched at all .....
You can install it by downliading the zip file then going into recovery and flashing it. Then wipe cache dalvik and fix permissions then reboot and you are done .
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I have searched and unable to find any definitive tutorials for ktoonz or GS3. I have tried to flash kernel end up with continual bootloop.
1st root
2nd kernel
3rd rom
Kernel can not be installed after rom has been installed.
Tutorials are showing tar files I have a CWM zip file, I'm assuming kernel before rom.

Step 1: Boot Into Recovery
Step 2: Make a Backup
Step 3: Flash This http://forum.xda-developers.com/attachment.php?attachmentid=1319515&d=1347395869
Step 4: Flash the Kernel. I recommend http://forum.xda-developers.com/showthread.php?t=1800576
(Note: Make sure you get the one for TouchWiz if you are running a stock based ROM or AOSP if you are running an AOSP ROM.)
Step 4: Wipe Cache and Dalvik
Step 5:Reboot
Step 6: Be Happy

Mon_J said:
I have searched and unable to find any definitive tutorials for ktoonz or GS3. I have tried to flash kernel end up with continual bootloop.
1st root
2nd kernel
3rd rom
Kernel can not be installed after rom has been installed.
Tutorials are showing tar files I have a CWM zip file, I'm assuming kernel before rom.
Click to expand...
Click to collapse
If I flash a kernel it's usually after the Rom.
Think about it your going to flash a custom kernel, then flash a Rom (most come with a preinstalled kernel). That'll over write your custom kernel.
Like its been said make sure your doing tw to tw and aosp to aosp.
Sent from Pluto.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Kernel Flashing Procedures
Mon_J said:
I have searched and unable to find any definitive tutorials for ktoonz or GS3. I have tried to flash kernel end up with continual bootloop.
1st root
2nd kernel
3rd rom
Kernel can not be installed after rom has been installed.
Tutorials are showing tar files I have a CWM zip file, I'm assuming kernel before rom.
Click to expand...
Click to collapse
You have things a bit mixed up. If you are doing a ROM and Kernel the ROM should go first.
From your Custom Recovery (rooted phone with Clockwork Mod recovery or TWRP)
Flash the ROM
Then the Kernel
Make sure to always clear both Dalvik-Cache and Cache after a ROM or Kernel flash
Then restart
When clearing the Dalvik-Cache and Cache your phone will take extra time on the first boot, and on my Sprint TW SGS3 4.1.1 Stock+Root it says "optimizing Apps" on the first reboot after having the Caches cleared.
Big thing you had mixed up was flashing the ROM after the kernel.. That will just overwrite the Kernel you wanted to do *Grin*..
As others mentioned, make sure you Keep TW (TouchWiz) with TW, and AOSP (AOKP) with AOSP (CM10/10.1) for the ROM and Kernel's to match or you will have issues (boot loops, random crashes, and other mixed results).
I'm using ktoonz kernel right now, was using AGAT kernel prior, both have been very nice.
Happy Flashing

Frre GS3 is TW JB rom. I was asking when to flash beacause I did flash after rom. Do I have to flash immediately after ROM is installed??? Trying it now will report back results thanks to all for thei input

Process for Flashing ROM and Adding Custom Kernels..
Mon_J said:
Frre GS3 is TW JB rom. I was asking when to flash beacause I did flash after rom. Do I have to flash immediately after ROM is installed??? Trying it now will report back results thanks to all for thei input
Click to expand...
Click to collapse
No, you don't have to install the custom kernel right after flashing the ROM, you _could_ flash FreeGS3 v2 (for example), and run it for a while and then reboot into recovery whenever you feel like trying a different kernel and flash say AGAT kernel, wipe the Dalvik-Cache and Cache, then restart to give the new kernel a try.
Fun times!

Finally it worked dont know what I was doing wrong??? But thanks to all

Note: The rom cleaner on this thread works on the verizon GS3 with the model number SCH-I535

[HELP] SPH-D710VMUB Stock (Rooted) (FJ12) to Dirty Unicorns 4.2

As the tile says, I need some help, possibly a walkthrough tutorial, on how to get from rooted stock FJ12 to Dirty Unicorns 4.2 ROM on my SPH-D710VMUB (Virgin Mobile). I had it running fine at one point and then things got screwed up after I updated to 4.3 and tried making to modifications to fix some issues I was having, so I had to revert back to rooted stock. And now, for the life of me I cannot remember how I got there. Any new ROM I attempt to install via recovery throws an error (error 7 if I recall correctly) and will not install.
Any help would be greatly appreciated.

ChrisMills83 said:
As the tile says, I need some help, possibly a walkthrough tutorial, on how to get from rooted stock FJ12 to Dirty Unicorns 4.2 ROM on my SPH-D710VMUB (Virgin Mobile). I had it running fine at one point and then things got screwed up after I updated to 4.3 and tried making to modifications to fix some issues I was having, so I had to revert back to rooted stock. And now, for the life of me I cannot remember how I got there. Any new ROM I attempt to install via recovery throws an error (error 7 if I recall correctly) and will not install.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
If you mean DU 4.3..
Make sure first you're on an ICS modem...if not. Flash it in recovery on the tw ROM you're on now so you can update prl/profile..If you need a cwm recovery for the stock ROM you're on..Look in rwilco12 repo for a custom kernel with cwm for you're build..
This is how I flashed it..
Boot to cwm on current ROM...
Wipe data,cache,dalvik cache and format system
Flash DU 4.3...wait
When it's done...Don't Reboot..Go to advanced and pick reboot recovery
When new recovery comes up....do the wipes again
Now flash DU 4.3 again
Reboot when its done..
Let it settle for a few ...
Boot to cwm
Flash gapps...reboot..
Enjoy...:good:

Thanks. I'll give it a try when I have time in the near future.

The issue that I'm having is that recovery won't flash anything and just gives me an error every time. Is there a way to upgrade the recovery without switching modems?

Mobile Odin, PC Odin... You probably have the stock kernel, which won't flash anything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
Mobile Odin, PC Odin... You probably have the stock kernel, which won't flash anything.
Click to expand...
Click to collapse
Could you elaborate? Mobile Odin what? Sorry, but I have no experience with this.

bilgerryan said:
Mobile Odin, PC Odin... You probably have the stock kernel, which won't flash anything.
Click to expand...
Click to collapse
Find cwm in tar format and flash it using pc or mobile Odin.
Sent from my SPH-L710 using xda premium

Mobile Odin is an app that allows you to flash kernels in tar format... Find it here on XDA.

Thank you for your help. If I continue to have problems I will continue the conversation later, but for now I'm going to try a touchwiz based ROM since battery life on stock seems so much better.

I'm following these exact steps and I can't get 3G nor 4G to work.
I used ODIN to get ICS stock rooted, then installed the CWM Kernel, and installed DU 4.3.
Any help here.. I've been going crazy for months trying to get this to work.
Thank you.

KamilDog said:
I'm following these exact steps and I can't get 3G nor 4G to work.
I used ODIN to get ICS stock rooted, then installed the CWM Kernel, and installed DU 4.3.
Any help here.. I've been going crazy for months trying to get this to work.
Thank you.
Click to expand...
Click to collapse
What modem are you using? That might be your issue.
Sent from my SPH-L710 using XDA Premium 4 mobile app

I've tried different scenarios of installing a different Virgin Mobile modems after doing a full wipe/cash/etc. I've also tried doing a stock install of JB (after trying a stock VM ICS) before i wiped and installed DU 4.3. I read somewhere that 3G and 4G for Virgin doesn't work on the new DU 4.3.

[STOCK ROM][4.4] ND8 Kitkat ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Simple. Stock rom, zipaligned and rooted. Will add some goodies later.
Note: Devs ARE FREE to use this as a base to update their roms. Have fun :good:
[SIZE=+1]MANDATORY PREREQUISITE[/SIZE]
Flash the ND8 stock tar (DO NOT FLASH WITH MOBILE ODIN. YOU ARE HIGHLY LIKELY TO BRICK IF YOU DO), if you haven't already, before you flash this. Then flash a custom recovery tar through Odin and boot into it
Click to expand...
Click to collapse
[SIZE=+1]Downloads[/SIZE]
What's the difference?
Stock ROOTED Odexed: ++Download here++
Stock ROOTED Deodexed: ==Download here==
Click to expand...
Click to collapse
[SIZE=+1]Download Mirrors[/SIZE]
All files are mirrored here on my new site! Link soon
Click to expand...
Click to collapse
[SIZE=+1]Steps for Flashing[/SIZE]
Update your recovery to latest TWRP, CWM, Philz, whatever you are using
Download ROM
Wipe data (optional, but recommended)
Wipe internal sd (optional, but recommended)
Flash rom
Profit.
Click to expand...
Click to collapse
[SIZE=+1]Mods/add-ons/other flashables[/SIZE]
Stock kernel: http://forum.xda-developers.com/showthread.php?t=2747586
Add Mobile data toggle back if you lost it: http://www.androidfilehost.com/?fid=23329332407593098
Click to expand...
Click to collapse
[SIZE=+1]Credits[/SIZE]
@JustArchi for the kitchen that finally gave us a functional updater-script
@sleshepic and @tdunham for linking me to the kitchen
@jdsingle76 for putting the zips together
@bilgerryan and @jdsingle76 for testing and @rompnit and @freeza for bouncing ideas/help
Sprint - Fast OTA's like always
Samsung - Putting together a great update
Google - For android!
Click to expand...
Click to collapse

Reserved for screenshots

You Sir, are awesome. Thanks.

quick question, so this requires stock nd8 to be flashed, means it'll wipe data anyway right?

Quote:
Misc Requirements
Flash the ND8 stock tar if you haven't already.
Is this step above necessary? Or do I just follow these instructions?
Quote:
Steps for Flashing
Update your recovery to latest TWRP, CWM, Philz, whatever you are using
Download ROM
Wipe data (optional, but recommended)
Wipe internal sd (optional, but recommended)
Flash rom
Profit.

It's necessary. That's why it's listed as a requirement.
No kitkat touchwiz rom will boot on your device otherwise.

Love your work Cnexus but Im hoping you would provide a little clarification.
1) Since you say this requires installation of the stock Tar Im assuming this will still have Knox built in? specifically in the bootloader I know the apps can be deleted but the bootloader is separate.
2) If I flash the ND8 tar can I downgrade to a previous version ?

Never mind

bilgerryan said:
Never mind
Click to expand...
Click to collapse
Don't click it, wait for it to download when you get to the page that says "Downloading"

docnas said:
Love your work Cnexus but Im hoping you would provide a little clarification.
1) Since you say this requires installation of the stock Tar Im assuming this will still have Knox built in? specifically in the bootloader I know the apps can be deleted but the bootloader is separate.
2) If I flash the ND8 tar can I downgrade to a previous version ?
Click to expand...
Click to collapse
1) Yes. There's no way around it if you want to ever run 4.4 touchwiz.
2) You can flash any version rom, but not firmware

docnas said:
Love your work Cnexus but Im hoping you would provide a little clarification.
1) Since you say this requires installation of the stock Tar Im assuming this will still have Knox built in? specifically in the bootloader I know the apps can be deleted but the bootloader is separate.
2) If I flash the ND8 tar can I downgrade to a previous version ?
Click to expand...
Click to collapse
Yes and Yes.

this thread and the above post clarifies everything for me, and i appreciate it!
successfully running 4.4 touchwiz now, flashed twrp and supersu, all is good. always appreciate all the hard work guys! and the floods of information to help along the way!

Nice. Thanks

*Damn you samsung and sprint for putting this damn knox in and making it mandatory.**

Well dang, you beat me to it. Good work dude.

Downloaded. Just waiting to charge my phone more to flash. Thanks for the hard work!
Sent from my SPH-L710 using Tapatalk

CNexus... i remember reading a post a couple days ago about a debloating tool that you were working on for ND8, and was wondering how that's coming along? happy to be on 4.4 but also looking forward to getting rid of some of the unnecessary crap app's!

jwigley24 said:
CNexus... i remember reading a post a couple days ago about a debloating tool that you were working on for ND8, and was wondering how that's coming along? happy to be on 4.4 but also looking forward to getting rid of some of the unnecessary crap app's!
Click to expand...
Click to collapse
Just use ROM Toolbox Lite

I flashed and couldn't get data to work.wouldn't even connect to WiFi?I flashed the deodexed file.

Never mind

[Q] Status of freedom to install ROMs?

I'm considering picking up a S3 off eBay, since they seem to be rather cheap nowadays ( under $100), and was thinking of it as an upgrade from my Galaxy Nexus.
I've seen people with Verizon S3s and S4s get stuck after updating so they couldn't install any ROMs anymore.
Of course I haven't really heard much about the Sprint phones being locked down so much, but could anyone tell me if (even with the newest update) if you can install CWM and CyanogenMod?
Thanks

GTRsdk said:
I'm considering picking up a S3 off eBay, since they seem to be rather cheap nowadays ( under $100), and was thinking of it as an upgrade from my Galaxy Nexus.
I've seen people with Verizon S3s and S4s get stuck after updating so they couldn't install any ROMs anymore.
Of course I haven't really heard much about the Sprint phones being locked down so much, but could anyone tell me if (even with the newest update) if you can install CWM and CyanogenMod?
Thanks
Click to expand...
Click to collapse
it would be better to install Philz Touch CWM advanced recovery from Odin and you can back up your stock rom when in the recovery then do the second option under wipe data to wipe everything but first make sure you have the Touchwiz rom and or AOSP rom + Gapps to flash in your internal storage then wipe cache and dalvik cache and your done so yes you can still install a custom recovery and custom rom like CyanogenMod

6th_Hokage said:
it would be better to install Philz Touch CWM advanced recovery from Odin and you can back up your stock rom when in the recovery then do the second option under wipe data to wipe everything but first make sure you have the Touchwiz rom and or AOSP rom + Gapps to flash in your internal storage then wipe cache and dalvik cache and your done so yes you can still install a custom recovery and custom rom like CyanogenMod
Click to expand...
Click to collapse
I don't think you read through my whole post, since I wasn't asking how to do it, since I'm already familiar with Heimdall flashing (have been flashing on early Verizon S3/S4, before updates blocked it).
But the big question is... If you were to go to 100% stock (or a 100% stock phone to begin with), and have the newest updates applied(I think it is 4.3 or 4.4), you can still flash stuff, and not have it brick, right?
I know if I were to try the same on a Verizon S3, it would almost certainly brick.

GTRsdk said:
I don't think you read through my whole post, since I wasn't asking how to do it, since I'm already familiar with Heimdall flashing (have been flashing on early Verizon S3/S4, before updates blocked it).
But the big question is... If you were to go to 100% stock (or a 100% stock phone to begin with), and have the newest updates applied(I think it is 4.3 or 4.4), you can still flash stuff, and not have it brick, right?
I know if I were to try the same on a Verizon S3, it would almost certainly brick.
Click to expand...
Click to collapse
but i did read through it i just answered the last part about CWM and CyanogenMod since that's what i know for sure
but you see for the rest of your words i have flashed on full stock 4.4.2 NDC since mine is the Boost variant with root and philz touch recovery....but only stuff made for touchwiz like the S5 ported apps just the worst i got after flashing is constant force closing of one or more apps for then i would have to boot back into recovery with the button method and flash a backup but i have done so and my s3 started with 4.4.2 stock update for the sprint variant even tho its the same model number i would wait to see if anyone else with it chimes in....but since it is the same basic model everything basically works the same way for them

Yes, you can still flash whatever you want besides modem. You just can't ever Odin anything older than ND8 (Sprint TouchWiz 4.4.2) or NDC (Boost / Virgin Mobile TouchWiz 4.4.2).
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v4.4, Ktoonsez' latest kernel and the latest Philz Touch Recovery.

Xperia S lollipop 5.1.1 oneofakind..rom..ubertc aroma 22 sep 2015 build version

I did factory reset..wipe dalvik cache..wipe cache..install ROM zip..flashed gapps ..and addons..I get boot up ..optimizing apps n finished too..and starting but unfortunately setup wizard has stopped.. Everytime I press OK..no home launcher its black screen but I can access setting through quick setting panel..n can use power menu too..but no start up..what may wrong ..anybody know guys ??

Flash recovery 2.8.7.0 by mickbart first then flash rom, gapps and add-on.

My recovery is 2.8.7.0...its latest one..I think flashing ROM process isn't problem..I flash ROM only...though still got setup wizard problem and again flash gapps ..the problem wasn't solve..so m back to my custom ROM..

soo-bane said:
My recovery is 2.8.7.0...its latest one..I think flashing ROM process isn't problem..I flash ROM only...though still got setup wizard problem and again flash gapps ..the problem wasn't solve..so m back to my custom ROM..
Click to expand...
Click to collapse
Clean flash is recommended...always wipe 4 partition before flash any rom for the best performance...
Cache,dalvik cache,data and system.

OK thanks for ur attention.. And suggestion u gave.. I ll try n post if that may work for me..coz I just wipe dalvik cache and cache ..but it was fine for every ROM I have tried..

Thanks buddy..after factory reset ..I wipe 4 partition and unmount everything except sdcard..then finally I success ..to boot up normally..

OK congratulations.. BTW there is a thanks button for saying thanks

OK got it

i need help
i need help anyone i download in this link
http://forum.xda-developers.com/xper...ria-s-t2958516
https://mega.nz/#F!j8sHHI6R!viVsTvyggPwHZ8PxDLpJiw
This is wrong
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is files
but link of name nAOSProm-5.1-b24 not want download if please someone upload this is file plz
I am new and do not know how my message brought to you please help me you have to download all the files, but this file does not want to download possible if anyone upload and thanks to you

amerpan said:
i need help anyone i download in this link
http://forum.xda-developers.com/xper...ria-s-t2958516
https://mega.nz/#F!j8sHHI6R!viVsTvyggPwHZ8PxDLpJiw
This is wrong
this is files
but link of name nAOSProm-5.1-b24 not want download if please someone upload this is file plz
I am new and do not know how my message brought to you please help me you have to download all the files, but this file does not want to download possible if anyone upload and thanks to you
Click to expand...
Click to collapse
Why do you want to download all the files ??? I think flashing for ROM one zip file is enough..

The solution but this happens when you install it
checking for md5 file
skipping md5 check no md5 file found
e: error executing updater binary in zip / sdcard / gapps-ip-20141109-signed.zip
error flashing

Please see the full information and instruction over here http://forum.xda-developers.com/showthread.php?t=2958516 u have to download the right zip file ..download latest one as mention in link and you should have latest twrp recovery 2.8.7.0 to flash this rom ..I had also same issue with this nASOProm..so m in oneofakind ROM try this ROM if want for easy flash ..just download oneofakind ROM and gappsfor XS and do clean flash as i did in my above post..

could you help ???
any change you make this work with your rom
http://forum.xda-developers.com/cro.../port-xperia-z4-framework-sony-stock-t3154772

KH5002 said:
any change you make this work with your rom
http://forum.xda-developers.com/cro.../port-xperia-z4-framework-sony-stock-t3154772
Click to expand...
Click to collapse
I haven't try yet ..but now I m curiosity if somebody have tried with this ROM

soo-bane said:
I haven't try yet ..but now I m curiosity if somebody have tried with this ROM
Click to expand...
Click to collapse
its not working...i have tried many times and many ways.

nageswarswain said:
its not working...i have tried many times and many ways.
Click to expand...
Click to collapse
same here so im asking him if he have solution for it

KH5002 said:
same here so im asking him if he have solution for it
Click to expand...
Click to collapse
hey bud, i m not a developer I m like u.. I can give u only wht I ve learn..this is not devs thread its my own thread for getting some help..u can find original ROM thread here http://forum.xda-developers.com/showthread.php?t=3199316 and can request for devs to make solution of it in next build :thumbup: