Related
I would like to find all dialer codes that work for the Sprint Version.
5689#*980# - LG Hidden Service Menu Thanks to EricDabbs
##RTN# - RTN Menu*
##SCRTN# - Erases any info that has been OTA provisioned. Forces a reboot and re-activation.
##DIAG# - Enables diag mode. this menu blocked by MSL. Simply enter your msl*
##DATA# - Advanced data menu. *
##DEBUG# - Debug Menu*
##CLEAR# - Reset network settings
##UPDATE# - Forces Activation
##GPSCLRX# - Clear GPS
##GPSTESTPRL# - ??
##WLAN# - WLAN info*
##LOG# - syslog info*
##MRU# - MRU Clear
##SSDRTN# - Reset SSD
##TEST - Data Test menu*
##YOUROWNMSLHERE# - Service Programming menu*
##443336772# Shows MSL code near the bottom of the screen thanks mojo4321
##4433386368# - Developer menu* - What is SKT Sprint?
##4437736368# - Producer menu*
Most of these work credit to AutoPrime Optimus G
Thanks to all who helped
chris0160 said:
I would like to find all dialer codes that work for the Sprint Version.
##RTN# - RTN Menu*
##SCRTN# - Erases any info that has been OTA provisioned. Forces a reboot and re-activation.
##DIAG# - Enables diag mode. this menu blocked by MSL. Simply enter your msl*
##DATA# - Advanced data menu. *
##DEBUG# - Debug Menu*
##CLEAR# - Reset network settings
##UPDATE# - Forces Activation
##GPSCLRX# - Clear GPS
##GPSTESTPRL# - ??
##WLAN# - WLAN info*
##LOG# - syslog info*
##MRU# - MRU Clear
##SSDRTN# - Reset SSD
##TEST - Data Test menu*
##YOUROWNMSLHERE# - Service Programming menu*
##4433386368# - Developer menu* - What is SKT Sprint?
##4437736368# - Producer menu*
Most of these work credit to AutoPrime Optimus G, now ive tried many but I cant figure out how I can get into the Hidden Menu, nor can I get in testing.apk (phoneinfo). *= i have tried and have worked.
Click to expand...
Click to collapse
Awesome, thanks for the list.
Quick question for you. Any idea where dialer codes for High Temperature Property can be changed? I want to see if it will resolve microstutter I am experiencing.
1. Enter the following based on your device model:
3845#*800# (for At&T model)
3845#*801# (for T-Mobile variants)
3845#*802# (for European variants)
3845#*803# (for AT&T and Canadian variants)
???? (Sprint)
Sorry at the moment no. In producer menu there is a battery thermal selection but i cant access it
Whats the easiest way to get your MSL on a rooted phone? The old Terminal command doesn't seem to work anymore.
WhiteZero said:
Whats the easiest way to get your MSL on a rooted phone? The old Terminal command doesn't seem to work anymore.
Click to expand...
Click to collapse
I paid my bill online and after opened a chat window and asked for it she gave it to me without question.
Sent from my LG-LS980 using XDA Premium 4 mobile app
WhiteZero said:
Whats the easiest way to get your MSL on a rooted phone? The old Terminal command doesn't seem to work anymore.
Click to expand...
Click to collapse
look in the app store for an app called MSL reader by ESCcode the app requires root but is the easiest way
https://play.google.com/store/apps/details?id=com.esccode.msl&hl=en
Univsoldur said:
look in the app store for an app called MSL reader by ESCcode the app requires root but is the easiest way
https://play.google.com/store/apps/details?id=com.esccode.msl&hl=en
Click to expand...
Click to collapse
Only works on HTC devices. Didn't work on my G2
WhiteZero said:
Only works on HTC devices. Didn't work on my G2
Click to expand...
Click to collapse
i tried lol my last 4 devices were HTC products
Sadly the easiest way is to ask sprint for it
Sent from my LG-LS980 using XDA Premium 4 mobile app
I called Sprint and asked for my MSL number and she gave it to me, no questions asked. Also you can just ask them for the instructions to program your phone, and the six digit dialer code they give you is your MSL.
Sent from my LG-LS980 using XDA Premium 4 mobile app
WhiteZero said:
Whats the easiest way to get your MSL on a rooted phone? The old Terminal command doesn't seem to work anymore.
Click to expand...
Click to collapse
Univsoldur said:
look in the app store for an app called MSL reader by ESCcode the app requires root but is the easiest way
https://play.google.com/store/apps/details?id=com.esccode.msl&hl=en
Click to expand...
Click to collapse
fatboypup said:
Sadly the easiest way is to ask sprint for it
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Barshalen said:
I called Sprint and asked for my MSL number and she gave it to me, no questions asked. Also you can just ask them for the instructions to program your phone, and the six digit dialer code they give you is your MSL.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You should be able to call Sprint to get your MSL without issues.
However those that prefer not to call Sprint can try this method in the link that worked for me. What is great about this method to get your MSL is that it appears to work on the major OEMs of phones like HTC, Samsung, LG, Motorola, etc. If this works for you on the LG G2, maybe you can try to see if it works on the GS4 or HTC One or Moto X if you have one.
Disclaimer: I actually got my MSL from Sprint when I called Sprint to activate my phone so I was able to verify after the fact that this method works below. I was only able to verify it on Windows 7. I don't expect it to have issues on Windows 8 but you never know.
http://forum.xda-developers.com/showthread.php?t=2521276
I have the paid version of cdma workshop and it works great. At a $108 there are better ways,....lol I bought it for other things not ust MSL's
You paid 108 =0 whats different
fatboypup said:
I paid my bill online and after opened a chat window and asked for it she gave it to me without question.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried the Chat method, here is what they told me:
I would like to share that we can only give the MSL number of the phone if the contract is expired, but since the contract is going on for your line so that is the reason we are unable to provide the MSL code from here,. we do not want that you face any sort of issue, I want to help you as much as possible from here. for that I recommend you to please contact our dedicated technical team at 8882114727 and there will be no issue,
Click to expand...
Click to collapse
ericdabbs said:
Disclaimer: I actually got my MSL from Sprint when I called Sprint to activate my phone so I was able to verify after the fact that this method works below. I was only able to verify it on Windows 7. I don't expect it to have issues on Windows 8 but you never know. http://forum.xda-developers.com/showthread.php?t=2521276
Click to expand...
Click to collapse
I used the method on the linked thread to obtain my MSL. After obtaining my MSL, I went to the ##DATA# menu and turned on the two disabled LTE bands. A pop-up asked for my MSL, so I entered the number I obtained and the phone rebooted with the additional bands enabled!
oesjmr said:
I used the method on the linked thread to obtain my MSL. After obtaining my MSL, I went to the ##DATA# menu and turned on the two disabled LTE bands. A pop-up asked for my MSL, so I entered the number I obtained and the phone rebooted with the additional bands enabled!
Click to expand...
Click to collapse
What are the benefits of this?
ChrisFSU said:
What are the benefits of this?
Click to expand...
Click to collapse
Right now the LG G2 by default has the B26 (800 MHz) and B41 (2500 MHz) LTE bands disabled. With your MSL code, you can manually enable these B26 and B41 LTE bands to do some LTE testing.
See these speedtest screenshots of my B41 LTE testing I did last night.
2nd post.
http://forum.xda-developers.com/showthread.php?t=2524824
WhiteZero said:
I tried the Chat method, here is what they told me:
Click to expand...
Click to collapse
Wow... They always give me mine wonder if having 4 lines and being a 10+ year subscriber has anything to do with it. :what:
Sent from my LG-LS980 using XDA Premium 4 mobile app
ericdabbs said:
Right now the LG G2 by default has the B26 (800 MHz) and B41 (2500 MHz) LTE bands disabled. With your MSL code, you can manually enable these B26 and B41 LTE bands to do some LTE testing.
See these speedtest screenshots of my B41 LTE testing I did last night.
2nd post.
http://forum.xda-developers.com/showthread.php?t=2524824
Click to expand...
Click to collapse
Cool, thanks for the reply! I've got it done, but for what it's worth, I haven't ever seen me connect to 4G, much less LTE.
ericdabbs said:
Right now the LG G2 by default has the B26 (800 MHz) and B41 (2500 MHz) LTE bands disabled. With your MSL code, you can manually enable these B26 and B41 LTE bands to do some LTE testing.
See these speedtest screenshots of my B41 LTE testing I did last night.
2nd post.
http://forum.xda-developers.com/showthread.php?t=2524824
Click to expand...
Click to collapse
What are you setting the Priority at?
I have been searching and cant seem to find anything... :/
I am trying to SIM Unlock my LG G Pad 8.3 Model VK810 that is Verizon and should come factory unlock I believe. I need this to be used on AT&T LTE which I have a sim card for and a tablet plan on the shared data plan.
It is on 4.2.2 baseband is m9615a-cefwtazm
I tried adding some ATT APN settings I found, but that did not help me. I think I need to Change it to GSM From CDMA somehow? I am not really sure. I can update and root if needed or whatever I need to do. I also have a samsung z3x box, but dont think it will work on the LG.
Any help would really help me out! Thank you in advance.
jaredlappa said:
I have been searching and cant seem to find anything... :/
I am trying to SIM Unlock my LG G Pad 8.3 Model VK810 that is Verizon and should come factory unlock I believe. I need this to be used on AT&T LTE which I have a sim card for and a tablet plan on the shared data plan.
It is on 4.2.2 baseband is m9615a-cefwtazm
I tried adding some ATT APN settings I found, but that did not help me. I think I need to Change it to GSM From CDMA somehow? I am not really sure. I can update and root if needed or whatever I need to do. I also have a samsung z3x box, but dont think it will work on the LG.
Any help would really help me out! Thank you in advance.
Click to expand...
Click to collapse
As it seems you are comfortable messing with your APN settings that should be all you will need to do. The device is locked to specific wireless frequencies but luckily for you at &t uses the same LTE frequencies. You will need to have root access in order to write your APN settings though, check the forums for information on that. Finally make sure that the sim you have is compatible with your tablet data plan, and your APN settings should be as follows for mobile data only.
APN: BROADBAND
MCC: 310
MNC: 410
uprightbass360 said:
As it seems you are comfortable messing with your APN settings that should be all you will need to do. The device is locked to specific wireless frequencies but luckily for you at &t uses the same LTE frequencies. You will need to have root access in order to write your APN settings though, check the forums for information on that. Finally make sure that the sim you have is compatible with your tablet data plan, and your APN settings should be as follows for mobile data only.
APN: BROADBAND
MCC: 310
MNC: 410
Click to expand...
Click to collapse
Happen to have a link for a Root tutorial and ROM that is good and stable for my Vk810? Will the V500 work with my pad?
I was looking at this one: http://forum.xda-developers.com/showthread.php?t=2660676
Thank you.
jaredlappa said:
Happen to have a link for a Root tutorial and ROM that is good and stable for my Vk810? Will the V500 work with my pad?
I was looking at this one: http://forum.xda-developers.com/showthread.php?t=2660676
Thank you.
Click to expand...
Click to collapse
I do not, I am sure you will find something if you look around. The V500 and V510 methods are not compatible. There is a method for yours though along with a custom recovery in the works. You may even have a custom rom in the near future.
P.S. this topic belongs in Q/A and not development.
uprightbass360 said:
I do not, I am sure you will find something if you look around. The V500 and V510 methods are not compatible. There is a method for yours though along with a custom recovery in the works. You may even have a custom rom in the near future.
P.S. this topic belongs in Q/A and not development.
Click to expand...
Click to collapse
Why would it belong in Q/A? If I am having to root and unlock it or do custom recovery? Isn't that with development?
Sorry if I have posted in the wrong place.
Here is the link I found for Rooting: http://forum.xda-developers.com/showthread.php?t=2703825
From researching it looks like it will work with the VK810.
This was also newly released: http://forum.xda-developers.com/showthread.php?t=2726707
But there are no custom roms that I have found yet.
So, I should Root this and then change the APN settings to what you told me and my ATT SIM would work?
Thank you!
jaredlappa said:
Why would it belong in Q/A? If I am having to root and unlock it or do custom recovery? Isn't that with development?
Sorry if I have posted in the wrong place.
Here is the link I found for Rooting: http://forum.xda-developers.com/showthread.php?t=2703825
From researching it looks like it will work with the VK810.
This was also newly released: http://forum.xda-developers.com/showthread.php?t=2726707
But there are no custom roms that I have found yet.
So, I should Root this and then change the APN settings to what you told me and my ATT SIM would work?
Thank you!
Click to expand...
Click to collapse
I haven't read much about i0root but it looks like it will work. Now the next part is not certain weather or not it will work, but I have seen tablets able to run on other networks that are unlocked. As long as Verizon did not implement any extra protection you should be able to use an at&t sim that is enabled for tablet data.
Once you are rooted go pick up es file explorer and navigate to /system/etc/apns-conf.xml . Make sure that before you change anything that you make a copy and name it something else so you can find it again if you have to go back. Open the file using the text editor. You can get rid of the other apns and just put your new one in there and give it a reboot. It should kick right on after you reboot. Good luck!
uprightbass360 said:
I haven't read much about i0root but it looks like it will work. Now the next part is not certain weather or not it will work, but I have seen tablets able to run on other networks that are unlocked. As long as Verizon did not implement any extra protection you should be able to use an at&t sim that is enabled for tablet data.
Once you are rooted go pick up es file explorer and navigate to /system/etc/apns-conf.xml . Make sure that before you change anything that you make a copy and name it something else so you can find it again if you have to go back. Open the file using the text editor. You can get rid of the other apns and just put your new one in there and give it a reboot. It should kick right on after you reboot. Good luck!
Click to expand...
Click to collapse
I have an LG G PAD 8.3 VK810 Verizon that I am trying to root in order to SIM unlock from Verizon to ATT.
I have installed the Drivers packages here and it finds the drivers in USB Modes: Charge tablet and media sync fine, but when I go to Internet Connection mode and choose ethernet it can not find the following drivers: CDC ECM, CDC SERIAL, AND 3 THAT SAY LGE ANDROID PHONE.
Any ideas on how to get these drivers installed to try the next step? I tried to go ahead and run the iroot program but it can not find the device.
Thank you for the help.
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
That's awesome. I love what tmobile is doing to the phone industry. I love their aggressive stance now on grabbing customers.
Sent from my Nexus 5
jlczl said:
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thx for the tip. The tablet is set to LTE mode and since T-Mobile LTE has the same band with Verizon LTE. It definitely works on T-Mobile.
For AT&T, no luck even if rooted. I used Radio Switcher app to go to the Tablet Info in Testing Mode. But it displays error message "This application does not work on this device".
ttn1185 said:
Thx for the tip. The tablet is set to LTE mode and since T-Mobile LTE has the same band with Verizon LTE. It definitely works on T-Mobile.
For AT&T, no luck even if rooted. I used Radio Switcher app to go to the Tablet Info in Testing Mode. But it displays error message "This application does not work on this device".
Click to expand...
Click to collapse
I rooted and popped in an AT&T sim card and it let's me put in the APN fine.
Sent from my HTC One_M8 using XDA Free mobile app
Skizzy034 said:
I rooted and popped in an AT&T sim card and it let's me put in the APN fine.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
But that is not my problem. The tablet doesn't pick up AT&T signal
ttn1185 said:
But that is not my problem. The tablet doesn't pick up AT&T signal
Click to expand...
Click to collapse
Easy...
Vk810 supports lte bands 4(aws) and 13 (700mhz block c), bands that Verizon uses
T-Mobile uses band 4 for lte mainly, will use band 2 (1900) and 12 (700 MHz block a) in the future as well. Vk810 will work on T-Mobile wherever tmobile has LTE right now (with band 4)
Att uses band 4, 2 (1900), 17(700mhz block b) and 30(2300mhz). Vk810 will only work on att if at uses band 4. If att only used band 2 in your area, your att phone (which supports band 2) will show LTE, but vk810 won't work
I don't know if there is a map showing which bands att uses in your area. There is a spectrum map showing who owns which band in which region, but no guarantee that att has active cell sites
http://specmap.sequence-omega.net
Tmobile sim on verizon g pad
jlczl said:
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How were you able to set up up the G Pad with the tmobile sim ? I went to the tmobile store and they were not able to get service running. What settings did you use ? Any help would be appreciated.
jlanderos93 said:
How were you able to set up up the G Pad with the tmobile sim ? I went to the tmobile store and they were not able to get service running. What settings did you use ? Any help would be appreciated.
Click to expand...
Click to collapse
you need to insert sim, reboot device (it'll prompt you to)
then you need to add the t-mobile APNs to the device
the settings below should work
http://forum.xda-developers.com/showthread.php?t=2240233
paperWastage said:
you need to insert sim, reboot device (it'll prompt you to)
then you need to add the t-mobile APNs to the device
the settings below should work
http://forum.xda-developers.com/showthread.php?t=2240233
Click to expand...
Click to collapse
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
mrgj said:
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
Click to expand...
Click to collapse
what region/location are you in?
believe that circle = battery indicator, not network indicator.... full circle = 100% battery, otherwise not 100% battery
mrgj said:
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
Click to expand...
Click to collapse
I'm not sure if this works on at&t. Mine is working on T-Mobile. All I did was insert the T-Mobile SIM and APN settings for it to work.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
jlczl said:
I'm not sure if this works on at&t. Mine is working on T-Mobile. All I did was insert the T-Mobile SIM and APN settings for it to work.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
as I said before...
this device is unlocked... it accepts any SIMs, and works w/ any band 4/13 network
AT&T's network accept any device that's approved for GSM/LTE spec, and compatible with their band 2/4/17/30 network.
AT&T doesn't have band 4 everywhere.. for example, no band 4 in nyc region.... this device won't work on at&t in nyc
paperWastage said:
as I said before...
this device is unlocked... it accepts any SIMs, and works w/ any band 4/13 network
AT&T's network accept any device that's approved for GSM/LTE spec, and compatible with their band 2/4/17/30 network.
AT&T doesn't have band 4 everywhere.. for example, no band 4 in nyc region.... this device won't work on at&t in nyc
Click to expand...
Click to collapse
LOL, I know it's unlocked. I'm using it on T-Mobile without a problem. And yes, I read your previous post. I was just answering what I personally know firsthand.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Hey. I just got a Puerto Rican version of LG G3 and I do not have LTE option in mobile network settings. Workaround is to go to service menu and select GSM/WCDMA/LTE auto there and then it works on LTE just fine. Any way to get it into the mobile network menu
Thanx!!
PS: using on Telus in Canada
Noone knows I guess.......
kufel said:
Hey. I just got a Puerto Rican version of LG G3 and I do not have LTE option in mobile network settings. Workaround is to go to service menu and select GSM/WCDMA/LTE auto there and then it works on LTE just fine. Any way to get it into the mobile network menu
Thanx!!
PS: using on Telus in Canada
Click to expand...
Click to collapse
I made a guide in the general section on how to enable LTE, check it out here, and see if it works for you.
My friends has a g920p and wants to enable some bands so lte from telcel can work now he has only H+. Can that be done. I know that the s3 can with some magic. Thanks
Enviado desde mi SM-N920C mediante Tapatalk
Just put the phone on automatic in mobile network settings and set up two apns one for hspa and another for lte but make sure the lte apn has the bearer option set to lte the other just leave it how it is.
Didnt get it my friend.... here in mexico we use same apn for 3G or 4G LTE. We just need a sim v6.x and will get the lte bands.
Enviado desde mi SM-G920F mediante Tapatalk
george241312 said:
Just put the phone on automatic in mobile network settings and set up two apns one for hspa and another for lte but make sure the lte apn has the bearer option set to lte the other just leave it how it is.
Click to expand...
Click to collapse
Can you explain this a little more im using sprint on tmobile and only getting h+ also
bighleo114312 said:
My friends has a g920p and wants to enable some bands so lte from telcel can work now he has only H+. Can that be done. I know that the s3 can with some magic. Thanks
Enviado desde mi SM-N920C mediante Tapatalk
Click to expand...
Click to collapse
I know how to do this, but you would need to have the MSL number, if you don't then Google idoneapps, this guy sells an app that unlocks phone and extract that number.
So i need the msl number so how can i get it. Friends phone is already unlock.
Enviado desde mi SM-G920F mediante Tapatalk
MSL number is needed to edit data settings in sprint hidden menu. Install shortcut lite master and then search for PST, launch that application. Then look for ##Data#menu. You'll see there if your LTE is enabled or not. If it is not the only way to enable it is having MSL number.
Hidden Menu
there is no need for app for shortcut. Go to setting and go to Activate this device. Phone will load some info then look at top right for MORE. Click on it then click on PST. This will take to hidden menu,
To get LTE working all you have to do is create two separate APN's one with your regular APN settings and another that is identical APN settings but on the "Bearer" setting put it on LTE and you're good to go also make sure your phone is set to automatic and not gsm / umts
Sent from my SM-G920P using XDA Free mobile app
Also the phone will automatically switch to the apn that's needed. No need to keep switching apns
Sent from my SM-G920P using XDA Free mobile app
george241312 said:
Also the phone will automatically switch to the apn that's needed. No need to keep switching apns
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
what you stated here is correct. but have you tried it yourself?
I did, but there issue with send text messages. incoming sms works, outgoing - no.
there is no need to set to automatic. in service menu there is point where you can set preferred network type LTE_GSM_UMTS., but again, sms does not work.
fixmewireless said:
what you stated here is correct. but have you tried it yourself?
I did, but there issue with send text messages. incoming sms works, outgoing - no.
there is no need to set to automatic. in service menu there is point where you can set preferred network type LTE_GSM_UMTS., but again, sms does not work.
Click to expand...
Click to collapse
Works perfect for me I'm using T-Mobile it does not even switch to 3g when sending a msg idk why yours is not working I'm on oh1 stock no root maybe if you have root it can screw things up because different kernel?
Sent from my SM-G920P using XDA Free mobile app
george241312 said:
Works perfect for me I'm using T-Mobile it does not even switch to 3g when sending a msg idk why yours is not working I'm on oh1 stock no root maybe if you have root it can screw things up because different kernel?
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
no root. i`m on stock oh1. i`m on metro pcs.
fixmewireless said:
no root. i`m on stock oh1. i`m on metro pcs.
Click to expand...
Click to collapse
No clue maybe do ##72786# it will reset the phones modem settings and it will nag about activation again and relock the phone but I did it since I can unlock it myself again and never had an issue.
Weird thing is that my phone after unlock it wanted activation popup and then it actually went through and it went away with my T-Mobile sim.
Sent from my SM-G920P using XDA Free mobile app
sadfsadf
Ok found something out for some reason if you do not get LTE after setting it to Automatic switch to LTE/CDMA let it reboot and Reswitch it to Automatic reboot again then LTE+GSM_WCDMA should work.
Do you mean in service mode select cdma/lte then reboot and then go back to service mode n select gsm/wcdma/lte? Because ive been trying that fkr hkurs since reading your post lol. If this works your a beast . We need a gsm rom for this phone tho
george241312 said:
Ok found something out for some reason if you do not get LTE after setting it to Automatic switch to LTE/CDMA let it reboot and Reswitch it to Automatic reboot again then LTE+GSM_WCDMA should work.
Click to expand...
Click to collapse
George, do you have a legit way to get lte working on our device ? I haven't seen any proof from anyone claiming lte working on att or tmobile.
george241312 said:
Ok found something out for some reason if you do not get LTE after setting it to Automatic switch to LTE/CDMA let it reboot and Reswitch it to Automatic reboot again then LTE+GSM_WCDMA should work.
Click to expand...
Click to collapse
hmmm, been in the same boat with T-Mobile and a G920P, with only 3G being picked up but after switching it to automatic, it picked up LTE! Thanks for the poiter. However, have you been able to get MMS enabled or working as I seem to have issues with that and not sure why it isn't downloading the messages. Not sure if I need to give T-Mo a call and get something enabled or what. BTW, how did you manage to make that annoying activation screen go away as the moment I got it unlocked and popped in my sim card, it can't ever activate, but works fine though
any one succeeded in unlocking bands
Has anyone had any success enabling additional bands on a Sprint S6? Basically the bands it comes unlocked with are useless for Europe 4g and would love to unlock bands 3, 7, 20, 28, however 3 & 7 would be enough.
jeff83nz said:
Has anyone had any success enabling additional bands on a Sprint S6? Basically the bands it comes unlocked with are useless for Europe 4g and would love to unlock bands 3, 7, 20, 28, however 3 & 7 would be enough.
Click to expand...
Click to collapse
Same here. seems to me Samsung does not give us open source to edit Exynos settings. As I'm aware, our phones' hardware is capable to get those bands
Hi, my lg g2 ls980 doesn't seem to work on 4g, even though the lte bands are supported by the device. I use a carrier which supports band 3, 5 and 40 and my device supports band 3 and 40. Sim card is also 4g enabled. Originally, the device didn't come with these bands. I added them using qxdm.
When i try to lock to lte using an app called Network Signal guru, it automatically changes to wcdma.
I've posted 2 threads about this issue before and got no response. Those who can help me, please do. It would help me a lot. Thanks!
ps: changing/updating modem doesn't help either.
farhanshaikh671 said:
Hi, my lg g2 ls980 doesn't seem to work on 4g, even though the lte bands are supported by the device. I use a carrier which supports band 3, 5 and 40 and my device supports band 3 and 40. Sim card is also 4g enabled. Originally, the device didn't come with these bands. I added them using qxdm.
When i try to lock to lte using an app called Network Signal guru, it automatically changes to wcdma.
I've posted 2 threads about this issue before and got no response. Those who can help me, please do. It would help me a lot. Thanks!
ps: changing/updating modem doesn't help either.
Click to expand...
Click to collapse
Hey bro how did u add the bands on ls980? I m using ls980..can u provide me the steps to add the bands? Only vodafone 4g data works on mine
umeshbluezzz said:
Hey bro how did u add the bands on ls980? I m using ls980..can u provide me the steps to add the bands? Only vodafone 4g data works on mine
Click to expand...
Click to collapse
I added lte bands using qxdm professional nv write tool. Check out the post on xda because it has very detailed steps. But the bands don't seem to work. I still dont get any network when changing to lte (bands show up in settings, though.) You might want to give it a try and maybe it could work. Btw now I'm using zenfone max pro m1 so I'll not try to rectify the problem anymore. Good luck
farhanshaikh671 said:
I added lte bands using qxdm professional nv write tool. Check out the post on xda because it has very detailed steps. But the bands don't seem to work. I still dont get any network when changing to lte (bands show up in settings, though.) You might want to give it a try and maybe it could work. Btw now I'm using zenfone max pro m1 so I'll not try to rectify the problem anymore. Good luck
Click to expand...
Click to collapse
Yeah i know the post on xda but can u give the files n tools u used which application version? Only send the files u used to add the bands and i'll do the rest
The LS980's hardware (antennas, etc) only supports bands 25, 26, and 41. No software changes you make will add the hardware needed to support other bands.