Develop Bugs

[Q] Installing Infamous Tab3 1.1 Error (Sig Verification Failed)

I downloaded Infamous Tab3 for my tablet, I put the rom package on my SD card, and tried to install it from recovery mode, and it said that the Signature Verification Failed.
I've also tried unzipping the archive contents onto my SD card, but there's nothing in there that the recovery mode can use.
Am I missing something here?

aceman67 said:
I downloaded Infamous Tab3 for my tablet, I put the rom package on my SD card, and tried to install it from recovery mode, and it said that the Signature Verification Failed.
I've also tried unzipping the archive contents onto my SD card, but there's nothing in there that the recovery mode can use.
Am I missing something here?
Click to expand...
Click to collapse
You have the cwm or twrp on the tab? You need to install it from that. Not stock recovery.

mirrin said:
You have the cwm or twrp on the tab? You need to install it from that. Not stock recovery.
Click to expand...
Click to collapse
Hello,
How to do that on non rooted devices?
Thank you.

adriansimo said:
Hello,
How to do that on non rooted devices?
Thank you.
Click to expand...
Click to collapse
Download and install the custom recovery that you wish to use (from the CWM or TWRP thread in the the development section).
Follow the instructions posted in the recovery threads.
There is a root.zip posted there as well to give you root (but the custom rom probably is rooted already).

gr8nole said:
Download and install the custom recovery that you wish to use (from the CWM or TWRP thread in the the development section).
Follow the instructions posted in the recovery threads.
There is a root.zip posted there as well to give you root (but the custom rom probably is rooted already).
Click to expand...
Click to collapse
"HOW TO INSTALL:
•Download ROM and place on SD
•Reboot into recovery
•Wipe unless change log say otherwise *
•Install the ROM
•Reboot out of recovery
•Skip setup wizard (you can put your name in)
•wait five minutes for all to settle as this is a highly tweaked ROM and Kernel (soon)
•Reboot"
These are the instructions. I don't know how to reboot in recovery a non-rooted device.
Thank you for your help.

adriansimo said:
"HOW TO INSTALL:
•Download ROM and place on SD
•Reboot into recovery
•Wipe unless change log say otherwise *
•Install the ROM
•Reboot out of recovery
•Skip setup wizard (you can put your name in)
•wait five minutes for all to settle as this is a highly tweaked ROM and Kernel (soon)
•Reboot"
These are the instructions. I don't know how to reboot in recovery a non-rooted device.
Thank you for your help.
Click to expand...
Click to collapse
Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen.

mirrin said:
*snip*
Click to expand...
Click to collapse
gr8nole said:
*snip*
Click to expand...
Click to collapse
Thank you so much for your help
ROM installed and running

aceman67 said:
Thank you so much for your help
ROM installed and running
Click to expand...
Click to collapse
Hello,
I have a SM-211 model and I have the same problem. From stock recovery I am not able to flash 1.1 because "Signe Verification Error". How did you managed to install this ROM?
Thank you.

308 ainssv
adriansimo said:
Hello,
I have a SM-211 model and I have the same problem. From stock recovery I am not able to flash 1.1 because "Signe Verification Error". How did you managed to install this ROM?
Thank you.
Click to expand...
Click to collapse
Read the entire thread, and search what the two people who I quoted said

aceman67 said:
Thank you so much for your help
ROM installed and running
Click to expand...
Click to collapse
aceman67 said:
Read the entire thread, and search what the two people who I quoted said
Click to expand...
Click to collapse
Sorry, but I don't know how to install CWM or TW recovery on non-rooted devices Tab 3 7.0 SM-211.
And I read all the posts a few times. Probably I am missing something.
Please help me.
Thank you.

adriansimo said:
Sorry, but I don't know how to install CWM or TW recovery on non-rooted devices Tab 3 7.0 SM-211.
And I read all the posts a few times. Probably I am missing something.
Please help me.
Thank you.
Click to expand...
Click to collapse
You're lucky my Girlfriend told me to be nice.
http://forum.xda-developers.com/showthread.php?t=2433853
This took me all of 2 min to find once someone pointed me in the right direction (the two people I quoted)
methinks you didn't watch the noob video.

aceman67 said:
You're lucky my Girlfriend told me to be nice.
http://forum.xda-developers.com/showthread.php?t=2433853
This took me all of 2 min to find once someone pointed me in the right direction (the two people I quoted)
methinks you didn't watch the noob video.
Click to expand...
Click to collapse
Thank you very much, but is still unclear for me if these will work for SM-211.

adriansimo said:
Thank you very much, but is still unclear for me if these will work for SM-211.
Click to expand...
Click to collapse
Hey guys, did it occur to you that the instructions you quoted are all for T210 ? It might not work on T211 and might even brick it. The OP and the me too would like an assurance that it will work on the t211. Also for the Infamous Tab3 the dev clearly said that I might lose the 3G if I flash it on my tab 3 T211.

[Q] Problem with flashing a ROM

Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.

Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.

dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.

Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3

dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.

Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.

dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.

Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used

dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.

Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used

See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .

DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.

Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.

Flashing rom, breaking stuff, need some help (twrp bootloop)

Okay, I'm stressed. This is not how I planned it, I'll try to keep it short:
Wanted to do a full clean install of this:
http://forum.xda-developers.com/showthread.php?t=2504016
So what I did:
-Used odin (bootloader) to flash mj5
-Used odin (pda) to flash twrp
-Used twrp to flash rom
-Realised I forgot to wipe, so wiped everything, then wiped media seperate (enter yes to continue) then my N2 rebooted.
Now it's stuck in a boot loop. Teamwin screen keeps flashing every 5 seconds, never going into it.
-Re-flashed twrp via odin, didn't help.
Rom doesn't boot either, bootloop at samsung logo.
**** this is so not good for my stress levels
I have no clue how I broke twrp because I even re-flashed it via odin and still bootloop
Download mode still works thank ****

Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!

Delano.888 said:
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Click to expand...
Click to collapse
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM

singhpratik87 said:
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
Click to expand...
Click to collapse
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.

Delano.888 said:
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Click to expand...
Click to collapse
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason

singhpratik87 said:
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
Click to expand...
Click to collapse
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103

Delano.888 said:
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Click to expand...
Click to collapse
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab

singhpratik87 said:
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
Click to expand...
Click to collapse
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..

Delano.888 said:
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Click to expand...
Click to collapse
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2

singhpratik87 said:
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
Click to expand...
Click to collapse
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again

Delano.888 said:
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Click to expand...
Click to collapse
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot

singhpratik87 said:
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
Click to expand...
Click to collapse
Not 2.7.0.2?

Delano.888 said:
Not 2.7.0.2?
Click to expand...
Click to collapse
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2

singhpratik87 said:
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
Click to expand...
Click to collapse
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!

Delano.888 said:
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Click to expand...
Click to collapse
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck

singhpratik87 said:
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
Click to expand...
Click to collapse
Very strange how that happened but everything is good now. Thank you very much!

@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!

Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.

Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:

Delano.888 said:
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Click to expand...
Click to collapse
Androidwizzard said:
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Click to expand...
Click to collapse
ODIN is pure unreliable for me. I'm still using a version of TWRP I got last year and it's still more reliable than cwm or any other recovery.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!

[REQ] CWM 6.0.4.7 flashable recovery

Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!

MitoTakatori said:
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
Click to expand...
Click to collapse
here you go

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Wow that is fast! Thanks mate. I'll try this one. Kudos!

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Loki check problem when I flashed it. Any lokified recovery? Thanks!

MitoTakatori said:
Loki check problem when I flashed it. Any lokified recovery? Thanks!
Click to expand...
Click to collapse
well i took that file from freegee folder, maybe you must flash this file first

Download CWM OR TWRP without any hassle
Just download freegee(root) from Google play store and once installed and opened ....let it download the necessary....then just click on cwm or twrp as per ur wish ......u might then feel as if the app has frozen....but it is the process of downloading...... And once finished it will show flash successful ....

Works with 4.4.2?
I used the FreeGee app on stock 4.4.2 V20c earlier, but it bricked my device. Why is that? How do I install a recovery on 4.4.2?

i have a question on flashing the cwm recovery image, i had to go back to stock as i was soft bricked - i now need to install a recovery and i am sure that when i did this a few weeks ago on my g pro i used flashify and flashed the cwm recovery image through this app and everything works ed well, now i am trying to do it and it flashes the file but wont go into recovery - it says fastboot mode started but never goes into recovery, i also tried rom toolbox to flash it and not having any luck - anyone have a way to do this ?

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Not work on LG F240L? Help
I want to flash rom [ROM][UNOFFICIAL][CM12][5.0.2][2/1/15] LiquidSmooth v4.0 on http://forum.xda-developers.com/opt...liquidsmooth-v4-0-t3013270/page3#post58726587
or rom Mokee http://download.mokeedev.com/?device=e980
Help me!
Thank's

I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?

chrisdotjan said:
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
Click to expand...
Click to collapse
Philz touch cwm is a good one, you can find here on xda, or via Google search. However, my personal experience with cwm touch variant on e980 is that it causes the recovery bootloop (where you just keeps on going back to the recovery screen). Version 6.0.47 is stable , and will not cause the boot loop say when you try to open the recovery by using the up volume + power buttons. This seem to be the issue too with the cwm provided by cm update in the developer's option. Read the postings in the Philz's thread if you want to know more about the recovery loop and the touch cwm.

I get wrong date and time whene i make a backup. I have a E986. How can i fix this?

Stuck after Install Rom

Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?

alexis333 said:
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
Click to expand...
Click to collapse
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)

Simple answer.
No.
Now what ?

Husky34 said:
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Click to expand...
Click to collapse
This isn't normally required on the M8, unless its some quirk specific to MIUI (which is a ROM I don't a have much knowledge of).
Make sure your TWRP version is up to date.
Make sure your hboot is up to date.
Wipe user data and cache (default wipe in TWRP) before flashing the ROM.
Those are the most common reasons for no boot after flashing multiple ROMs.

I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?

alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
That may be the issue right there. I know some folks are still using it, but Philz hasn't been updated in a long time. And since some newer ROMs have issues with older TWRP builds, I would assume the same would be true with Philz.
You can get TWRP here: https://dl.twrp.me/m8/

alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html

I flashed TPWR and then flashed the new ROM and everything ok.
Thanx for your help men ..

alexis333 said:
Thanx for your help men ..
Click to expand...
Click to collapse
There's a button for that.
Happy it worked for you.