After installing the Swype keyboard I noticed that SMS no longer predicted the contact name I was entering into the TO: field.
On the off chance that it was Swype causing the problem, I uninstalled it and restarted my phone.... which still doesnt predict recipient names.
Any suggestions as to what I can do?
Thanks
I've seen this happen with both swype and fingerkb -- try entering a few letters, then BACKSPACE -- the pick-list will then pop up. Works for me...
gwbard said:
I've seen this happen with both swype and fingerkb -- try entering a few letters, then BACKSPACE -- the pick-list will then pop up. Works for me...
Click to expand...
Click to collapse
You're right, that does work. Thanks.
Got the same problem with fingerkeyboard,that fix doesnt work unfortunately. Ah well, the HTC one aint too bad.
Hey Folks,
I've searched the forums, but found no answer to my dilemma...
On my TP2 I just notice that the predictive selection of contacts that normally pops up when i'm selecting a recipient to compose a new SMS/E-mail message is gone. I don't know whether this is an option that can be turned on or off, and I haven't found any configurations in the regular settings so far.
Does anyone have any suggestions?
Thanks in advance.....
Previously, when I would start to type the To: of an email, at the bottom of the screen there would be an entry with a match from my contacts - or at least I thought it was from my contacts. Recently I lost my email account and had to create a new one. Now the auto type does not work. Is it because of the new account? that the auto type really worked from previous email addresses entered in previous messages?
if you use a keyboard with predictive text then it doesn't work. If you're using the slide out keyboard it should work.
Does it work of the contacts list or previously sent emails?
in my experience, it should pull from your contacts...it's a bit buggy, to say the least...in the "message to:" field, you can press the "enter" button to select from your contact...i end up having to do that most of the time...
Did you install swype recently? I noticed it wouldn't pull up contacts when I installed swype, only when I backspaced one letter would the contacts be pulled up.
that may be it...ive had swype installed for quite sometime...
It is swype that has made the closest match selection stop working. Even though I am individually typing each letter (not swyping), the swype keyboard does not seem to allow it.
Could this be an update or WTF ?
Anyone notice this?
I use predictive text all the time, but in Chrome search box I get no auto spacing while typing and using predictive text.
Any other time I use predict text it works fine.
Pp.
I've noticed this too. Been annoying the hell out of me.
Chrome search format has changed and now when you type your typing in the address bar at top instead of a search box. Stupid updates.
Pp.
I have just started using the Samsung Stock Messages app for SMS, coming from Textra.
I noticed that when I hit compose and enter a contact name, it shows all the phone numbers for that person. It doesnt even show which are mobile and which are not.
On Textra it labeled the numbers, and it also had an option to only show Mobile numbers.
Is there any way to do this on the Messages app? Its really confusing as I cant always tell which is even the right number to select for a text message to a contact...seems weird.
Thanks.
lirong said:
I have just started using the Samsung Stock Messages app for SMS, coming from Textra.
I noticed that when I hit compose and enter a contact name, it shows all the phone numbers for that person. It doesnt even show which are mobile and which are not.
On Textra it labeled the numbers, and it also had an option to only show Mobile numbers.
Is there any way to do this on the Messages app? Its really confusing as I cant always tell which is even the right number to select for a text message to a contact...seems weird.
Thanks.
Click to expand...
Click to collapse
It does show mobile and other like work etc for me, open the messages app > contacts tab at the bottom > select contact > if contact has more than one number saved a pop-up appears with names of different numbers shown
Thanks for the reply. I feel like I am missing something as this process is so cumbersome for me that it almost doesnt make sense...
1 - in Textra and others, I hit the compose text button and start typing a name. it then immediately will show any associated numbers with labels so you can see which is the mobile, which is the home, etc. in this stock app I just see the contact name with a bunch of numbers. and if I hit one, it doesnt bring up any sort of window with all the labels.
2- following your directions, if I first go to the contacts tab (already an extra step) I see along list of all of my contact names. There is a search button, but if I hit that and type a contact, I again see an unlabeled list of numbers.
3 - if I manually scroll down the entire list until I find my contact, then when I press it I see a pop up with labels.
Any which way this is a LOT of steps to compose a text message - seems like it doesnt make sense. there is no more streamlined way?
lirong said:
Thanks for the reply. I feel like I am missing something as this process is so cumbersome for me that it almost doesnt make sense...
1 - in Textra and others, I hit the compose text button and start typing a name. it then immediately will show any associated numbers with labels so you can see which is the mobile, which is the home, etc. in this stock app I just see the contact name with a bunch of numbers. and if I hit one, it doesnt bring up any sort of window with all the labels.
2- following your directions, if I first go to the contacts tab (already an extra step) I see along list of all of my contact names. There is a search button, but if I hit that and type a contact, I again see an unlabeled list of numbers.
3 - if I manually scroll down the entire list until I find my contact, then when I press it I see a pop up with labels.
Any which way this is a LOT of steps to compose a text message - seems like it doesnt make sense. there is no more streamlined way?
Click to expand...
Click to collapse
Not that I know of, this is why there are 3rd party apps with a lot more time and attention gone into adding features over stock, personally I just leave conversations in my messages app so I can open and text direct from there, only the first ever message you send them you have to perform those steps
Why not just stick with Textra?
Great question!
Sadly, something is screwed up with AT&T, my Galaxy S9 and text messaging.
Several weeks ago, I started having an issue where I am sporadically not getting random texts. They just never appear - and then people are wondering why I didnt reply. To troubleshoot this, I went to the AT&T portal and checked the log of text messages...the missing messages are never even hitting my AT&T number, so it seems this is not an app issue.
AT&T has so far been useless in diagnosing this. But googling around, I have noticed that a number of people have had this issue and it seems AT&T's "Advanced Messaging" feature is a possible culprit. There have been reports that deactivating this has solved the issue for some users.
Unfortunately the only way to deactivate this that I have uncovered is through the stock app. And if I deactivate this in the stock app and then switch to another app like Textra, it is getting turned on again automatically. I have not discovered any way to keep this deactivated while using a 3rd party SMS app.
Crazy but tragically seems to be the case...very frustrating.
lirong said:
Great question!
Sadly, something is screwed up with AT&T, my Galaxy S9 and text messaging.
Several weeks ago, I started having an issue where I am sporadically not getting random texts. They just never appear - and then people are wondering why I didnt reply. To troubleshoot this, I went to the AT&T portal and checked the log of text messages...the missing messages are never even hitting my AT&T number, so it seems this is not an app issue.
AT&T has so far been useless in diagnosing this. But googling around, I have noticed that a number of people have had this issue and it seems AT&T's "Advanced Messaging" feature is a possible culprit. There have been reports that deactivating this has solved the issue for some users.
Unfortunately the only way to deactivate this that I have uncovered is through the stock app. And if I deactivate this in the stock app and then switch to another app like Textra, it is getting turned on again automatically. I have not discovered any way to keep this deactivated while using a 3rd party SMS app.
Crazy but tragically seems to be the case...very frustrating.
Click to expand...
Click to collapse
There is an app called "Package Disabler Pro" which allows without root, the disabling of system packages, if you know what the advanced messaging package is called, you might be able to permanently disable it without having to have the stock SMS app as default, perhaps disabling the Samsung stock SMS app would also do it (Just read here that Disabling the messages app on the S10+ allows Textra to work)
https://www.reddit.com/r/galaxys10/comments/blcs1b/textra_no_sent_messages_only_received_messages/
Contacting the Textra dev would be a good idea too, ask them to add the feature you need into textra
I am also seeing another method that may disable it, by disabling VoLTE
https://textra.uservoice.com/knowle...80-t-mobile-at-t-verizon-missing-messages-rcs
Looks like that is for T-Mobile but worth a shot, if AM uses VoLTE it should kill it