Related
Hi all,
I simply love this phone, but I'm facing a situation that my screen is too sensitive. The home screens were so sensitive a few programs were started without my knowledge. It got better after I switched to Launcher Pro.
However, it is still too sensitive in other areas. When I'm scrolling down, say, the apps in Market, I'll always end up selecting a few items accidentally before I reach the end of the list.
I've used HTC Desire in the past and I'm quite sure the problem is not due to me.
Does anyone else face the same problem, or I have a hardware problem? Or software problem? Can I be tweaked by any means?
Any feedback would be useful! Thanks!!!
KG
I faced this problem before... while swiping, apps accidentally open. But instead of "too sensitive" i thought it's insensitive... because a short swipe was sometimes interpreted as a tap (maybe because the swipe was not fully detected?).
Anyway, I had 2 layers on my device... the pre-applied sheet and another screen protector that came with the box.
I removed the second layer, leaving only the pre-applied sheet, and all is well again... no more accidental "taps"
vincent.hsy said:
I faced this problem before... while swiping, apps accidentally open. But instead of "too sensitive" i thought it's insensitive... because a short swipe was sometimes interpreted as a tap (maybe because the swipe was not fully detected?).
Anyway, I had 2 layers on my device... the pre-applied sheet and another screen protector that came with the box.
I removed the second layer, leaving only the pre-applied sheet, and all is well again... no more accidental "taps"
Click to expand...
Click to collapse
Dude, you mean the cause was the screen protector that came with the phone???
kargtan said:
Dude, you mean the cause was the screen protector that came with the phone???
Click to expand...
Click to collapse
For my case, maybe 2 layers is just too thick
I'm having the same problem. And that solution seems to make sense. I would give it a try, but if the problem still occurs, I'd be wasting one screen protector..
zha1 said:
I'm having the same problem. And that solution seems to make sense. I would give it a try, but if the problem still occurs, I'd be wasting one screen protector..
Click to expand...
Click to collapse
That was how I solved my problem. I actually put on the spare screen protector because when I got the set I didn't realize there was already a pre-applied layer.
Don't blame me if it doesn't work for you
perhaps some of you guys just have the shakes?! ;-p
I guess the screen is never to perfect for everyone.
kargtan, I've noticed the same about the tap sensitivity - I often accidentally "tap" when I mean to swipe. Came from an iPhone 3g and didn't notice this on that device. Might be a matter of getting used to it, not sure. Have you gotten any feedback from others in other forums?
I've noticed this too, and put it down to the screen protector. It's not android OS causing it, never had the problem on my htc hero...
However, now that i've gotten used to the phone it doesnt do it any more - guess my brain has automatically trained itself to drag the screen a little bit more firmly or something.
One thing i have noticed about the arc is: because the bezel around the screen is so thin, i often accidentally launch apps just by holding it. My fingers wrap around slightly & touch the edges of the screen.
Does any of you have problems while trying to swap a screen from another and instead of swapping you get like a "bounce" and stay on the same screen? because that happens to me all the time, I came from an htc Legend and this is making me crazy !
btw, this happens to me if I hold the phone with my right hand and try to do the swapping with my thumb, the only way to get it right is to hold the phone with my left hand and use the index of my right hand
Screen too/not sensitive
Hi guys,
I think the problem arises from the slowness of the phone, not "too sensitive". I used to use the HTC Desire in the past and I was very used to the screen scrolling very quickly. In contrast, the arc is slower and hence the screens don't scroll as fast and hence my way of handling the Desire would cause the problems stated.
I did a few things since my last posting and it seems better now:
Replace the SE Home with Launcher Pro - this seems to have improved on the speed of the phone, and hence better responsiveness to the touch.
Rooted the phone and uninstalled some stock programs.
Removed useless widgets on the desktops.
Adjusted my way of scrolling as someone has suggested.
This is quite frustrating at times, especially so because other than this problem, this phone is a gem, especially its form factor, the sound quality and most importantly, the quality of the camera.
I might sell the phone once the company issues me with a Blackberry (DANG!), but I am kinda unwilling because I have been taking lots of photos with my Android phones and these photos are generally well-liked by my Facebook friends.
agree with bezel thing and hard to use thumb.
noticed arc screen (the screen guard perhaps ) easily get oily and slippery.
had to wipe phone and wash hand so often that make me like some sort of disorder.
Don't know why you guys seem to be having problems... I don't have any issues with my screen swipes at all... smooth and fast.. both on stock and Launcher Pro..
Same deal here. But that's because the screen is sensitive beyond the display area including the black border, and the edge is too narrow. When I use one hand swiping or tapping, the palm of my hand touches the black border. The screen registers two touches in quick succession and thus jumps.
In Phone keypad, enter *#*#7378423#*#* (the numbers mean SERVICE word in keypad), you can go into test mode. Select [Service test]->[Touch Screen] to test the badly touch screen of SE Phones.
You will discover when you swipe the edge of touch screen, the touched result is very not satisfied. The lines you swiped will not accurate and appear like jags, or stick on the edge of the screen.
The touch panel made in China...? ;-)
Me too!
Hey!
i also have a xperia tipo....and i too have the sensitive problem
Could also be a kernel problem?
I remember I installed a kernel a while back that would make my screen hypersensitive; just hovering over the screen would already activate it!
I don't remember which one, it was back in the GB days. But I'm pretty sure it can be changed in the kernel.
Hi. I just bought the G2 over the internet and I observed what I deem to be a touch issue. I first noticed the problem while using the on-screen keyboard, where an entire column of keys won't respond to touches, though when I go on landscape mode, they do. I tested the screen using doodle applications and found that a part of the screen stretching from top to bottom doesn't respond to touches [see photo embedded].
Are there any hotfixes/troubleshooting tips that I could do? Or is it really a hardware problem (e.g. broken digitizer) which requires repair/replacement? Having the phone returned means a grueling process of shipping and waiting, so I'd like to find out first if there's anything I could do from my end. Thanks!
I think that this is an hardware problem, I have this with my Xperia X1 too, but not so much
Sent from my chair.
probably need a new digitizer, about $20 from ebay, about 30min of your time. i had one that you could draw a line horizontally across the screen exactly halfway and the top wouldnt work but the bottom would. in landscape or portrait. new digitizer fix it
it started out a few days ago. I started to feel like my touchscreen is not as responsive as usual.
I noticed numerous times it felt like my swipes as well as my touch (say when i want to open a specific app) are not being registered properly. Now the way i recall my samsung galaxy s, it would register a click sometimes even when you're hovering about 0.5mm to 1mm above it. So with that in mind, i thought i would try to do that with my one x. I would hover my hand slightly above it, and no response - NOTE: THIS IS NOT THE PROBLEM JUST YET.
Anyways, seeing as hovering over it doesn't work (which is not a problem imo) i would proceed to touching the screen, however i touch it without applying any pressure, i could even swipe and it WOULD NOT switch over to the next screen. I could touch the screen and the application would NOT register my fingers. However, after applying more pressure it suddenly gets registered. Even though the pressure i have to apply is just slight, Isn't this how a resistive touchscreen is supposed to behave and not a captivate touchscreen?
I thought that's because of my screen protector, i took it off and gave it 2~3 days and the issue remained.
Now my question(maybe even a favor) to you guys is as follows.
1. Try to click on an app, however, do this without applying any pressure, simply touching your touchscreen (might have to do this slowly). Does it respond? Or is it the same with with you as it is with me?
2. Please report in on the behavior of your touchscreen.
NOTE: I just want to know if my touchscreen is behaving normally or not. I do recall a better experience, actually if anything i was very happy with my one x's screen and this is simply annoying. Espeically when i have it on a soft surface and i push my screen, normally a soft surface tends to bulge in upon pressure.
It could take three touches for that freaking thing to register it if my phone is lying on a pullover or whatever else that's soft. Lately i'm not really happy with how webpages scroll up or down either, feels as if my swipes are lightly registered thus a sluggish movement upward or downward.. I hope this is not yet another issue that i have to deal with because my unit already had a wifi defect and, despite being happy with this device it might be my last. It's just too troublesome. Unless my stupid provider replaces it but i could keep dreaming.
shadehh said:
... Now the way i recall my samsung galaxy s, it would register a click sometimes even when you're hovering about 0.5mm to 1mm above it.
1. Try to click on an app, however, do this without applying any pressure, simply touching your touchscreen (might have to do this slowly). Does it respond? Or is it the same with with you as it is with me?
2. Please report in on the behavior of your touchscreen.
Click to expand...
Click to collapse
0,5 - 1mm ? do you even realize how big this distance is? No way the SGS would register that... or react on that. (I come from that phone too)
with that in mind, my One X is much more responsive as the SGS or any other phone I had.
And no, I do not need to press. As the slightest pressure gives my screen ripples. not possible.
Either try another kernel if you have some custom one, I know there was some problems with those sometimes. Or factory reset if you are stock and then return it?
PAGOT said:
0,5 - 1mm ? do you even realize how big this distance is? No way the SGS would register that... or react on that. (I come from that phone too)
with that in mind, my One X is much more responsive as the SGS or any other phone I had.
And no, I do not need to press. As the slightest pressure gives my screen ripples. not possible.
Either try another kernel if you have some custom one, I know there was some problems with those sometimes. Or factory reset if you are stock and then return it?
Click to expand...
Click to collapse
Well maybe i exaggerated the hovering part but within a certain (very small distance, probably 0,2 maybe even 0,1 the screen would react).
I've been from viper, to jelly bean roms, to ARHD and Maximus. Same thing.
edit: actually, 0,5 mm is hardly anything if you look at how big a mm is and put and reduce the distance by 50%, anyway that's not the discussion http://www.meb.uni-bonn.de/Cancernet/Media/CDR0000578121.jpg
Hover taps/clicks happen, I'm sure I haven't touched the screen a couple of times but it responded to what I wanted to do. Anyways, try this app called touchscreen test to confirm your issue.
death__machine said:
Hover taps/clicks happen, I'm sure I haven't touched the screen a couple of times but it responded to what I wanted to do. Anyways, try this app called touchscreen test to confirm your issue.
Click to expand...
Click to collapse
So you are implying that hovering touch seems to work on your Hox?
Hovering also works with my HOX. And I don't have to use any pressure, hardly even touch the screen.
Sent from my HTC One X using xda app-developers app
Same here. Hardly touching screen and still responds. I'm running stock 1.29.
Sent from my HTC One X using xda app-developers app
..mhm well how should I go on about this? I mean the people at the shop are not the brightest.. I gotta send it in though. It is annoying
Sent from my HTC One X using xda app-developers app
Tell them the digitizer is faulty and needs to be changed.
Hi, I have an issue that has formed after glass replacement on my Note 2. I was extremely careful in trying not to damage anything during the replacement process and I did not use excessive heat either, keeping the screen under 170 degrees F to loosen the cracked screen. The issue is that about half the time the phone touch screen will stop working during normal use and then when I hit the lock button on the right side and then unlock the phone again it will be ok for a while before it acts up again. So far, I have done a soft and hard reset with no luck. I noticed the problem is worse when the 12 small screws in the back of the phone are very tight, I loosened them all a few turns and this helped it act up less. The pen always works. I installed a multi touch testing app and this proves that something is up because it sometimes reads fingers that arent there, generally in the middle of the screen and sometimes this programs just completely flips out and reads fingers everywhere. So at this point Im guessing that maybe the replacement glass is too close to the LCD? It also does seem to be negatively affected if I bend the whole phone slightly, this also sometimes causes the touch screen to flip out of just quit altogether. Any input is extremely appreciated!
Is there supposed to be anything between the glass and the lcd when the glass is replaced? Sorry if thats a dumb question.
Anyone having touch sensitivity issues or weird touch problems on their cover screen?
I do have the Spigen tempered glass protector installed on it so I'm not sure if that's the issue or if it's the phone itself.
Speed Test https://vidmate.bid/
I turned up touch sensitivity in the settings and that's helped a little but it still misbehaves sometimes. Like it will scroll when I'm trying to tap and vice versa.
Wondering if anyone else has had problems (with or without screen protector)
You sir, are superfluously creating a new thread.
Touch/tap problems
I'm having problems with my Fold 4 not registering taps. I tap a space on the screen and nothing happens. I do it several more times, and finally it responds. I haven't seen a clear pattern yet, because it's somewhat intermittent. Has anyone else...
forum.xda-developers.com
My wife and i we both pre-ordered the Samsung Fold 4 and we both got the same issues that guys described.
We contacted Samsung over the phone... Is it only me but even if i'm full of compassion their customer support is awful? So many calls, they connected to our phones with Samsung Tutor... And no clear help or explanation after hours wasted. I even tried speaking with them in 2 languages and i'm completely lost.
Anyway that aside, we are thinking of just returning both of them for good. Such a waste, aside from that i like pretty much all the rest... The crease some people don't like i can live with it. And even all that cluttering with those Samsung Apps they always have (i prefer Google Apps but oh well), i can also live with it all...
But not being able to use the screen properly? That's too much for such an high priced device.
If you guys have ideas, i'm all open, but tomorrow i think we'll return them. Because like i read here it still looks like especially the outer layer has problems.
If it helps anyone, here's what we tried:
-I never copy from one phone to a other. Clean start everytime. And cloud storage.
-We both did a factory reset after noticing all that.
-Both tried safe mode.
-Both erased the cache clean and both tried the repair app in the system (while restarting the phone, hold power and volume up).
-Both put the sensitivity higher at first. No other screen protector than the thing the put on the big screen.
-Went to accessibility and reduced the touch from 0.5 to 0.3 seconds...
Honestly i'm not sure i can do more than think they screwed up. Not sure many would try more than that. It supposed to work out of the box. Good luck everyone. I'm curious if anyone has more.
Applied the screen protector as u but i dont seem to have any touch issues apart from the screen itself to be small and unable to type on it without mistakes